I am wondering is there any software could offer auto complete feature for linux command? most linux need enter lots of parameters, if there is such a tool, that could be cool & great.
View 6 RepliesI only found softlayer which is offer automation reboot from monitoring which is cost $5 per box per month.
Do you know any other DC which offering the same automation feature?
i am trying hard to understand how everything works, i just finished installing my CentOS 5.2 OS and need to install + Apache + MySQL + PHP/Perl.
Also i downloaded the apache file and tried to insatll it but it has to be done by giving a command via Bash shell for wht i understood, so i downloaded bash shell file. How and where do i enter the commands for installing these applications?
if I load a webpage from my server, the browser keeps still loading this page and doesn't finish loading. First if I refresh the page, I get the full page content. Sometimes there is html-data missing, sometimes I get only a part of an image. I tried different browsers and different computers, everywhere the same problem.
View 2 Replies View Relatedseems the centos 7 support is not yet fully full.
Error: ifmng failed: sh: /sbin/ifconfig: No such file or directory /sbin/ifconfig 'eth0:1' '1.2.3.4' netmask '255.255.255.0' up exited with non-zero status 127
In Plesk 12.0.18 Update #14 when adding an IP with the Plesk Webinterface.
I am using Cloudlinux OS ( Centos 6 ) and do not see the option to Add the Multi-PHP Versions ?
View 2 Replies View RelatedNew to Plesk in general so I don't know for sure if the "Register Domain Names" feature is part of our 'Web Pro Edition' or comes by default.
Also, is the domain registration option showing up because when installing Plesk I enabled the "Enable access to premium commercial apps"?
So my question is, can we still set it up so users have access to install applications (free and commercial), but disable the domain registration option?
There is a strange problem with the new feature fail2ban. I have noticed that a local ip address (ip address from the webserver itself) was added to the blocked ip addresses of fail2ban now for the second time. What I can see is that it was the recidive jail.
If there is nginx used as reverse proxy you get a "502 Bad Gateway". Any way to find out more about the reason why an ip address is added to the list of blocked ip addresses in fail2ban?
After each Plesk auto-update FTP server don't answer anymore.
We have to restart it with this commande line : /etc/init.d/xinetd restart
Under a Reseller's resources there are 3 options for Overuse:
1) Overuse is not allowed
2) Overuse of disk space and traffic is allowed
3) Overuse is allowed (not recommended)
All 3 apply to a Reseller's subscription.
Firstly, why should we care on the policy the reseller adopts for its subscriptions? It's nothing to do with us. The Overuse option for Resellers should aply to the Reseller account. But it doesn't. We have overusing resellers that are not getting suspended when the stats run like on Plesk 9.
This is broken.
I had been wondering why I wasn't getting MU#42 of Plesk 12.0.18 on Ubuntu 14.04.2 LTS (and 12), and I noticed this when running apt-get update (just after running autoinstaller from UI)...
Reading package lists... Done
W: GPG error: http://autoinstall.plesk.com trusty InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 22738D6AF741DEBClick to expand...
couldn't find any installation guide by Paralles how to install Plesk12 step by step. Found some on the internet, got the webinstaller started, but it says I should visit "192.168.0.100:8447" in my browser, which is just the internal IP of the server. Now I don't know what to do now, it's a fresh installed CentOS 6.5
View 6 Replies View Relatedmy plesk control panel 11.5.30 has problems running the auto update of the panel. During the upgrade, the server reboots even after an error message appears that shows the following message: Can't parse /root/parallels/products.inf3: Error reading end tag.
View 4 Replies View Relatedafter the update i've got many errors in plesk panel, for example:
- change webhosting settings (like password, etc)
Internal error.
ERROR: Call to a member function getWebServerFPAdminSysUser() on a non-object (Apache.php:738)
- click on server components in server manager:
ERROR: Call to a member function getWebServerPackage() on a non-object (class.ServiceControl.php:76)
It seems last night Plesk ran any update and it failed. I received an mail with a link to the log, but I cant access Plesk Panel to see the log.
When trying to access Plesk, I get "502 Bad Gateway" Message.
Inside the Log there are many errors like:
Code:
2014/12/18 15:26:51 [crit] 14416#0: *3563 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxxxx:8443"
Is there any way to disable auto updates for plesk?
when somebody send email to hisname@hisdomain.com I'm getting that email in my mailbox (administrator email in Plesk settings).There is no CC or BCC in email recipient.I've tried to turn off the auto-reply and I'm not getting any emails.
View 10 Replies View RelatedOS : centos 6.5 2.6.32-431.23.3.el6.x86_64 actual plesk version 12.0.18 after auto-update google authentication and 3other extensions were enabled and now google authentication isn't in the list of installed extensions and not functioning i was able to login as before without google authentication but when I wanted to reinstall the extension catalog shows a empty screen I have ran /usr/local/psa/admin/sbin/autoinstaller --select-release-current --upgrade-installed-components & /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair no luck where to look or to reinstall the extention catalog ?
View 3 Replies View RelatedIs there any way to auto-delete all the messages in a specific mailbox on a specify domain on a daily basis? Using Postfix.
View 4 Replies View RelatedMail in the spam folder is supposed to be deleted after 30 days.
I have some mail that has been in the Spam folder for 40 days. Why hasn't it been auto-deleted?
how to automatically enable nginx by default for all domains/subscriptions and or even just as a whole since we do not use apache at all.
View 18 Replies View RelatedI have a message of failure during autoupdate of my plesk ...
The logs are.
Code:
Execution failed.
Command: autoinstaller
Arguments: Array
(
[0] => --select-product-id
[1] => plesk
[2] => --select-release-current
[3] => --upgrade-installed-components
[4] => --include-components-from-class
[Code] ....
ERROR: Installation will not continue
Not all packages were installed.
Please, contact product technical support.
Last night the plesk auto updater ran an update. And i was wondering if others have had the same issue?
CentOS6, RHEL5 x64 Plesk 12 Unlimited
Detecting installed product components.
Gathering information about installed license key...
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[Code] .....
ERROR: The Yum utility failed to install the required packages.
Attention! Your software might be inoperable.
Please, contact product technical support.Click to expand...
I'm trying to find Courier IMAP config: /etc/courier/imapd
Because i would like to edit the parameters for the trash folder (see qoute and link below)
The file on my server is not there. I did some grep and locate commands and was unable to find it.
##NAME: IMAP_EMPTYTRASH:0
#
# The following setting is optional, and causes messages from the given
# folder to be automatically deleted after the given number of days.
# IMAP_EMPTYTRASH is a comma-separated list of folder:days. The default
# setting, below, purges 7 day old messages from the Trash folder.
# Another useful setting would be:
#
# IMAP_EMPTYTRASH=Trash:7,Sent:30
[Code] ....
I use for my client the webmail Roundcube.. How to I set for Auto Deleting The Mails From Trash Folder and Junk with mail server Dovecot after 30 days?
View 2 Replies View Relatedis there a way to look which process/user used the most cpu in last 30min or in last hour.
View 3 Replies View Relatedon linux how can i delete files older than the current month (that is leave only this month's files) from one subdir and recurse every directory?
View 8 Replies View Relatedfirst we have, uname -a
Code:
Linux nsa.nullbytehosting.com 2.6.9-55.plus.c4 #1 Sun May 20 10:11:05 EDT 2007 i686 i686 i386 GNU/Linux
this is centos4.5 I believe.
and I have 5 ip addresses.
208.110.67.101 at eth0:0
208.110.67.114 at eth0:1
208.110.67.115 at eth0:2
208.110.67.116 at eth0:3
208.110.67.117 at eth0:4
my problem.
I cannot seem to get my dns working properly.
I am pointing my domain of nullbytehosting.com to ns1.nullbytehosting.com and ns2.nullbytehosting.com and of course , iuse godaddy, and ive configured that part properly.
Ive recently stopped using any control panel software, and started using ssh only.
I can access ns1 and ns2 . nullbytehosting.com just fine.
www. or just plain old nullbytehosting.com and its a no go.
allow me to show you my files.
/etc/resolv.conf
Code:
search nullbytehosting.com
nameserver 208.110.67.101
nameserver 208.110.67.114
/var/named/chroot/etc/named.conf
Code:
//
// named.conf for Red Hat caching-nameserver
//
include "/etc/rndc.key";
controls {
inet 127.0.0.1 allow { localhost; } keys { "rndckey"; };
};
options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
recursion no;
/*
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
*/
query-source address * port 53;
multiple-cnames yes;
fetch-glue yes;
};
//
// a caching only nameserver config
//
controls {
inet 127.0.0.1 allow { localhost; } keys { rndckey; };
};
zone "." IN {
type hint;
file "/var/named/named.ca";
};
zone "localdomain" IN {
type master;
file "/var/named/localdomain.zone";
allow-update { none; };
};
zone "localhost" IN {
type master;
file "/var/named/localhost.zone";
allow-update { none; };
};
zone "0.0.127.in-addr.arpa" IN {
type master;
file "/var/named/named.local";
allow-update { none; };
};
zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN {
type master;
file "/var/named/named.ip6.local";
allow-update { none; };
};
zone "255.in-addr.arpa" IN {
type master;
file "/var/named/named.broadcast";
allow-update { none; };
};
zone "0.in-addr.arpa" IN {
type master;
file "/var/named/named.zero";
allow-update { none; };
};
zone "nsa.nullbytehosting.com" {
type master;
file "/var/named/nsa.nullbytehosting.com.db";
};
zone "nullbytehosting.com" {
type master;
file "/var/named/nullbytehosting.com.db";
};
zone "enigmagroup.org" {
type master;
file "/var/named/enigmagroup.org.db";
};
zone "2020code.com" {
type master;
file "/var/named/2020code.com.db";
};
zone "megansblog.info" {
type master;
file "/var/named/megansblog.info.db";
};
logging {
};
view test {
};
/var/named/nsa.nullbytehosting.com.db
Code:
$TTL 14400
@ 86400 IN SOA ns1.nullbytehosting.com. nullbytehosting.gmail.com. (
2007031502
86400
7200
3600000
86400
)
ns1.nullbytehosting.com. 14400 IN A 208.110.67.101
ns2.nullbytehosting.com. 14400 IN A 208.110.67.114
mail.nullbytehosting.com. 14400 IN A 208.110.67.101
nsa.nullbytehosting.com. 14400 IN A 208.110.67.101
ftp.nullbytehosting.com. 14400 IN A 208.110.67.101
www.nullbytehosting.com. 14400 IN CNAME nullbytehosting.com.
test.nullbytehosting.com. 14400 IN CNAME nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN MX 0 mail.nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN NS ns1.nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN NS ns2.nullbytehosting.com.
nsa.nullbytehosting.com. 14400 IN A 208.110.67.101
/var/named/nullbytehosting.com.db
Code:
$TTL 14400 nullbytehosting.com 14440 IN SOA ns1.nullbytehosting.com. psychomarine.gmail.com. (
2007031601
86400
7200
3600000
86400
)
ns1 14400 IN A 208.110.67.101
ns2 14400 IN A 208.110.67.114
mail 14400 IN A 208.110.67.101
ftp 14400 IN A 208.110.67.101
www 14400 IN CNAME nullbytehosting.com.
nullbytehosting.com. 14400 IN MX 0 mail.nullbytehosting.com.
nullbytehosting.com. 14400 IN NS ns1.nullbytehosting.com.
nullbytehosting.com. 14400 IN NS ns2.nullbytehosting.com.
nullbytehosting.com. 14400 IN A 208.110.67.101
/var/named/named.local
Code:
$TTL 86400
@ IN SOA localhost. root.localhost. (
1997022700 ; Serial
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400 ) ; Minimum
IN NS localhost.
1 IN PTR localhost.
/var/named/named.zero
Code:
$TTL 86400
@ IN SOA localhost root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
/var/named/localdomain.zone
Code:
$TTL 86400
@ IN SOA localhost root (
42 ; serial (d. adams)
5M ; refresh
5M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
localhost IN A 127.0.0.1
/var/named/named.broadcast
Code:
$TTL 86400
@ IN SOA localhost root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
and finally, here is a list of the files in the /var/named directory.
Code:
/slaves
/chroot
/data
named.broadcast
named.zero
localdomain.zone
named.ca
localhost.zone
named.ip6.local
named.local
nsa.nullbytehosting.com.db
nullbytehosting.com.db
can someone please inform me of why this isnt allowing me to see nullbytehosting.com www.nullbytehosting.com or any sites I point to ns1.nullbytehosting.com or ns2.nullbytehosting.com
clearly accessing
ns1.nullbytehosting.com
ns2.nullbytehosting.com
shows the default page I intend to see, however
nullbytehosting.com
www.nullbytehosting.com
or anyhting like that doesnt exist.
A lookup on the dns tools website, shows alot of errors , that google isnt much help with. everyone has their own way, and none seem to put it all together and work properly.
what command to type if I want to check all latest files (edited/saved) on a certain folder?
View 2 Replies View RelatedI want to run a script that will loop through all of the domains on a particular server and remove all MX records with mail.*.I am testing on a single test domain at the moment but I'm not sure how to do the wildcard./usr/local/psa/bin/dns -d example.com -mx '' -mailexchanger mail.*
The following example command is from: URL....To add an MX resource record mail3.example.com specifying domain name mail.example.com as the mail exchanger for the record, and setting the mail exchanger's priority to the DNS zone on the domain example.com to 15:
# ./dns -a example.com -mx mail3 -mailexchanger mail.example.com -priority 15..​What does the mail3.example.com got to do with it? Isn't it just adding a MX record mail.example.com?
how i up the backup complete on my reseller?
View 6 Replies View Related