seems the centos 7 support is not yet fully full.
Error: ifmng failed: sh: /sbin/ifconfig: No such file or directory /sbin/ifconfig 'eth0:1' '1.2.3.4' netmask '255.255.255.0' up exited with non-zero status 127
In Plesk 12.0.18 Update #14 when adding an IP with the Plesk Webinterface.
We noticed that for now only Plesk 12 supports RHEL / CentOS 7. Is support for EL 7 planned for Plesk 11.5?
View 13 Replies View Relatedif I load a webpage from my server, the browser keeps still loading this page and doesn't finish loading. First if I refresh the page, I get the full page content. Sometimes there is html-data missing, sometimes I get only a part of an image. I tried different browsers and different computers, everywhere the same problem.
View 2 Replies View RelatedUp till the last update Plesk was working correctly. After the latest update I can't send out mail in any form:
webmail, pop3, wordpress forms, etc.
This is the error message I get:
Command died with status 100: "/usr/bin/spamc".
Command output: Mail handler 'limit-out' said: REPLY:554:5.7.0
Your message could not be sent. The user spamfilter is not allowed to send email.
When I reverted back to the last snapshot before the update everything works fine again. But the automated update bot messes it all up again when it downloads the newer version.
I can get the service list by /usr/local/psa/bin/service –l
But when i try /usr/local/psa/bin/plesk –-status it show error : No such file or directory
We're not able to install the ePages App.
We get this error:
Code:
Non-zero exit status returned by script. Output stream: 'Failed to install site: Not Found '. Error stream: 'Failed to install site: Not Found '.
panel.log
Code:
[2014-08-25 17:13:04] ERR [util_exec] proc_close() failed
[25-Aug-2014 17:13:04 Europe/Berlin] PleskUtilException: '/opt/psa/admin/bin/sappmng' '--run-application-script' '--script-file-name=configure.php' '--script-name=remove' '--script-language=php' '--user-name=xxxx' '--application-full-name=file:////opt/psa/var/apspackages/ePages-6.10-8b4212cd8-fdd0-5e46-5949/cache' failed with code 1.
[Code] ....
I configured the App in the application vault to the ip address of our plesk server.
I am wondering is there any software could offer auto complete feature for linux command? most linux need enter lots of parameters, if there is such a tool, that could be cool & great.
View 6 Replies View RelatedDoes Parallels support Plesk 12 being installed on a Linux VM that is provisioned on Microsoft Windows Server 2012 R2 Hyper-V?Is it fully supported?
View 2 Replies View RelatedI am trying to install Magento on my apache server. I am running into the dreaded mcrypt issue as Magento needs it to run. I have now been googling for the past few hours and have gotten nowhere.
Here are my details:
Linux
Centos 5.5
PHP 5.3.3
x86_64
Plesk 12
I have tried installing all sorts of different repos and it just isn't working.
When I try to install using # yum install php-mcrypt I get the following:
Loaded plugins: fastestmirror
Package php-mysql is obsoleted by php-mysqlnd, trying to install php-mysqlnd-5.5.13-3.el5.remi.x86_64 instead
--> Processing Dependency: php53-gd for package: psa-php53-configurator
--> Processing Dependency: php53-imap for package: psa-php53-configurator
[Code].....
In my Plesk 12.0, I installed support por PHP 5.3, and 5.4. But when I go to configure my site, I only can select these versions if I put PHP like FastCGI:
But in "Apache Module" I only can select PHP 5.3.3:
My WebSite doesn't work with FastCGI, only with "Module Apache".
Why I cannot select 5.3.29 with "Module Apache".
I'm running plesk 12.0.18 on centOS 6.6 and I have some problems with ipv6 support for a domain. This is what I see in my apache logs for that domain:
2001:8d8:90b:c900::2a:19d1 - - [29/Jun/2015:17:44:55 +0200] "GET /hello.html HTTP/1.0" 404 1208 "-" "facebookexternalhit/1.1 (+http://www.facebook.com/externalhit_uatext.php)"
2001:8d8:90b:c900::2a:19d1 - - [29/Jun/2015:17:49:39 +0200] "GET /hello.html HTTP/1.0" 200 384 "-" "curl/7.19.7 (x86_64-redhat-linux-gnu) libcurl/7.19.7 NSS/3.16.1 Basic ECC zlib/1.2.3 libidn/1.18 libssh2/1.4.2"
2001:8d8:90b:c900::2a:19d1 is the ipv6 from my server, and it appears there because of nginx working as reverse proxy.
As you can see, facebook can't get /hello.html (404 response), but I can get it from another server using curl (200 response). I tried disabling nginx and this is what I see now:
2a03:2880:2110:dff3:face:b00c:0:1 - - [29/Jun/2015:17:55:11 +0200] "GET /hello.html HTTP/1.1" 404 1208 "-" "facebookexternalhit/1.1 (+http://www.facebook.com/externalhit_uatext.php)"
2001:8d8:8b3:6000::4e:c5a0 - - [29/Jun/2015:17:54:52 +0200] "GET /hello.html HTTP/1.1" 200 361 "-" "curl/7.19.7 (x86_64-redhat-linux-gnu) libcurl/7.19.7 NSS/3.16.1 Basic ECC zlib/1.2.3 libidn/1.18 libssh2/1.4.2"
Still not able to get /hello.html. This is a problem for me because I can't share anything on facebook, since their bot can't find anything on my site.
I've already configured ipv6 for my domain.
We have many hundreds of domains on our Plesk 11.5 server (Linux) but many of them do not have SSL support enabled. Any script that would enable it for all domains and subdomains on our server, to save the tedious time of manually checking every domain?
View 2 Replies View RelatedI have a CentOS system (under VPS, virtuozzo) and I would like to run a background job.
Here what I did:
1. ssh into the server
2. execute:
$ ./myscript.php > output.log &
After executing that command, I got back to the shell prompt.
Then I can see the log file:
$ tail -f output.log
But when I close my ssh session (using putty), the background job is also closed!
Anyone know why?
How can I run background job, leave it running, and quit my ssh session?
I've searched the web to set up ssl on 1 domain of 2 installed op 1 ip address. It seems easy: setup virtual hosts, turn ssl on and point to your certificates.
I'm completely lost. I setup the certificate from geotrust in plesk panel 11.5 as described in the manual but that didn't work, apparently because i have 2 domains and 1 ip.
So i started looking to adapt my vhost settings to use sni. First problem: i can't find the setting of the virtual host.
Secondly where can i find the path to the .key and .crt files.
How i can install a ssl certificate on one of the two domains sharing 1 ip.
How to upgrade PHP to PHP 5.4 on CentOS 6 ?
View 4 Replies View Relatedif I disable SSL on Plesk server some days/weeks later it is activated again.
To disable SSL I use the script from Parallels in this post: [URL]
After running this script to deactivate SSL I did some checks to verify if its deactivated and it definitely was deactivated.
I guess that SSL is activated again by the parallels updates or micro updates.
Is it possible to enable NLS support in psa-proftpd package?
root@server :]> proftpd -V | grep NLS
- NLS support
Is it possbile for proftpd to support not English filenames ( for example russian, greek etc )?
A really nice feature has been brought to plesk with the native support for multiple PHP versions now.I tried it out, but there seems to be an error in the session.save_path of PHP 5.5.23 (the one I tested).sessions.save_path points to /var/lib/php/sessions but the default before seems to be /var/lib/php/session so the folder does not exist.For now I simply worked with a symlink to solve the problem:
cd /var/lib/php/
ln -s session sessions
Not sure if other PHP version or other OSes (besides PHP 5.5.23 and CentOS 6.6 are affected).
We purchased license for MagicSpam and now couldn't find anywhere installation for Centos 7...How to install?
View 2 Replies View RelatedI am attempting to migrate from a debian os server with the latest plesk 12 to Centos (rather cloudlinux) and would like to know if there are any options that should not be checked during the process?
I recently tried to do the normal procedure, which is to transfer all objects, etc. And for some reason the percentage went from 1-50% to then back to zero.. but when clicking to check the current status, its still working
Status: in progress
Current operation deploying domain.com
current operation progress: empty bar
Different sites are transferring, but I am not sure if the migration will effect the system because the difference in OS folder structure and file location.
Can i install imagemagick on centos 6.5 with this commands?
ImageMagick:
[root@server ~]# yum install ImageMagick
[root@server ~]# yum install ImageMagick-devel
PHP-imagick:
[root@server ~]# yum install gcc (Please note: if it is already installed, then it will be updated if required)
[root@server ~]# yum install make automake
[root@server ~]# yum install php-pear
[root@server ~]# yum install php-devel
[root@server ~]# pecl install imagick
Now you will have to add the imagick extension in your PHP condifuration file:[root@server ~]# cd /etc/php.d/[root@server ~]# nano -w imagick.ini
Then you put following line in that file:extension = “imagick.so”..And save it with <CTRL> <O>After finishing this, you will have to restart Apache as follows: [root@server ~]# service httpd restart
I have the latest centos 7 and plesk 12 installed on a dedicated server and i wish to add a new IP to use on a specific website. However, when I am trying to add the IP in plesk i am getting the following error:
Code:
Error: ifmng failed: sh: /sbin/ifconfig: No such file or directory /sbin/ifconfig 'eth0:1' '85.214.93.196' netmask '255.255.255.255' up exited with non-zero status 127
I have read somewhere on the forum that installing iptables can fix this but cents 7 is using the new firewald and i am wondering if in the future such a change will not affect the well being of the overall server.
Is there any solution to this problem or will there be a fix from Plesk in the near future ?
I am trying to install a magento on Plesk Version 12.0.18 Update #19 / CentOS Linux 7.0.1406 (Core).
Plesk is reporting that it cant install magento because php-mcrypt is missing. So I tried the following:
Code:
1) rpm -ivh [URL] ....
2) yum update
3) yum install php-mcrypt
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.plusline.de
* epel: mirror.23media.de
* extras: ftp.plusline.de
* updates: mirror.netcologne.de
[Code] ......
What can i do to install mcrypt without breaking other dependencies ?
Why isnt Plesk 12 configuring firewalld under CentOS 7 correctly? We have to manuella enable port 8443 and all other ports manually with firewall-cmd..
View 1 Replies View RelatedI have new Linux server with CentOS 6.6 on it. I have tried to install Plesk version 12.0.18 on it.
During installation process from http://autoinstall.plesk.com/plesk-installer shell script I'm getting error:
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:09:44 CST 2014
***** problem report *****
ERROR while trying to SMB database not created
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
STOP Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:10:01 CST 2014: PROBLEMS FOUND
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:15:46 CST 2014
When I have tried to run command:
# /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
I'm getting errors:
---TRANSACTION 0 0, not started, process no 32603, OS thread id 139715979196160
MySQL thread id 38, query id 7054 localhost admin
SHOW ENGINE innodb status
--------
FILE I/O
--------
I/O thread 0 state: waiting for i/o request (insert buffer thread)
[Code] ....
how to protect Linux Server from Ddos Attack (Botnet, Loic)
View 2 Replies View RelatedI am trying to install Plesk 12.0 on fresh CentOS 6 (64bit). It goes as far as initialising the databases and then moans about missing files:/usr/bin/sw-engine: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I then install libpng
$ yum install libpng.x86_64
Re-run installer and hits next error - libfreetype:
/usr/bin/sw-engine: error while loading shared libraries: libfreetype.so.6: cannot open shared object file: No such file or directoryI have CentOS-base repo and Epel repo enabled.
Why are those files not being installed as dependencies by Plesk? Is this a bug ?
I've been trying to get this to work for almost 2 weeks now. Is there a tutorial around for Plesk 12, Postfix and WHMCS that works? WHMCS does not support Plesk, only Direct Admin and cPanel.I'm getting this in maillog:
ct 4 23:12:48 xxx postfix/smtpd[24500]: connect from mail-la0-f44.google.com[29.5.15.4]
Oct 4 23:12:49 xxx postfix/smtpd[24500]: E83E57C9C: client=mail-la0-f44.google.com[29.5.15.4]
Oct 4 23:12:50 xxx postfix/cleanup[24506]: E83E57C9C: message-id=<CAC9_f0rbT-Lb-v1NKhAr7+HAkg@mail.gmail.com>
Oct 4 23:12:50 xxx /usr/lib/plesk-9.0/psa-pc-remote[4537]: handlers_stderr: SKIP
Oct 4 23:12:50 xxx /usr/lib/plesk-9.0/psa-pc-remote[4537]: SKIP during call 'check-quota' handler
Oct 4 23:12:50 xxx postfix/qmgr[7097]: E83E57C9C: from=<test_user@gmail.com>, size=1859, nrcpt=1 (queue active)
Oct 4 23:12:50 xxx postfix-local[24509]: postfix-local: from=test_user@gmail.com, to=support@xxx.net, dirname=/var/qmail/mailnames
Oct 4 23:12:50 xxx postfix/pipe[24508]: E83E57C9C: to=<support@xxx.net>, relay=plesk_virtual, delay=1, delays=0.89/0.01/0/0.16, dsn=2.0.0, status=sent (delivered via plesk_virtual service)
Oct 4 23:12:50 xxx postfix/qmgr[7097]: E83E57C9C: removed
I have tried editing .qmail and I have also tried this tutorial -[URL] ..... but nothing is working for me at the moment.
I'm running a CentOS 6 server with Plesk 11.0.9 installed. It's only being used for dev purposes with only a couple vhosts running on it. All of the vhosts are using PHP - there are a few WordPress sites and Zend Framework 2 applications running. Up until a few months ago it was also running a high traffic WordPress site, but that's no longer the case.
This server has been running without problems for over a year. A few days ago I first started noticing 503 errors (Service Temporarily Unavailable) on accessing one of the vhosts from the web browser.
I logged on through ssh and noticed the load was a bit higher than I expected (nothing crazy though). All other vhosts using PHP also gave me the same error. The only vhost that was working normal was a Ruby on Rails app (Redmine).
I also did a netstat -napt and noticed many connections from two or three IP addresses. I checked their geographical location and after blocking them through iptables the problem seemed to have gone away.
Now it's a few days later and the same problem started popping up. I checked again through netstat and noticed that again a whole bunch of connections from only a handful of IP addresses were connected to Apache.
When I was digging deeper I noticed that some of those IP addresses were what looks to me like other servers (at least they're running Apache). I'm suspecting they are hacked servers and they're trying to use my server to send spam or some other type of evil.
I just blocked those new IP addresses in iptables and that seemed to have solved the problem for now again, but I want to solve the root of the problem.
So my questions are:
1) How can I find out to what vhost those clients are connected?
2) Why does Apache stop working with not that many client connections, when it used to serve thousands of visitors at the same time when that big site was still running on this server?
3) What could they possibly be using my server for? The first time it happened I thought that they found some leaking WordPress plugin to use to spam people, but today I checked and there's barely anything in the mail queue.
couldn't find any installation guide by Paralles how to install Plesk12 step by step. Found some on the internet, got the webinstaller started, but it says I should visit "192.168.0.100:8447" in my browser, which is just the internal IP of the server. Now I don't know what to do now, it's a fresh installed CentOS 6.5
View 6 Replies View Related
