couldn't find any installation guide by Paralles how to install Plesk12 step by step. Found some on the internet, got the webinstaller started, but it says I should visit "192.168.0.100:8447" in my browser, which is just the internal IP of the server. Now I don't know what to do now, it's a fresh installed CentOS 6.5
View 6 Replies
I had been wondering why I wasn't getting MU#42 of Plesk 12.0.18 on Ubuntu 14.04.2 LTS (and 12), and I noticed this when running apt-get update (just after running autoinstaller from UI)...
Reading package lists... Done
W: GPG error: http://autoinstall.plesk.com trusty InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 22738D6AF741DEBClick to expand...
I have a message of failure during autoupdate of my plesk ...
The logs are.
Code:
Execution failed.
Command: autoinstaller
Arguments: Array
(
[0] => --select-product-id
[1] => plesk
[2] => --select-release-current
[3] => --upgrade-installed-components
[4] => --include-components-from-class
[Code] ....
ERROR: Installation will not continue
Not all packages were installed.
Please, contact product technical support.
Is it possible to install Plesk 12 to Debian Jessie with the autoinstall script?
View 7 Replies View RelatedWe purchased license for MagicSpam and now couldn't find anywhere installation for Centos 7...How to install?
View 2 Replies View RelatedCan i install imagemagick on centos 6.5 with this commands?
ImageMagick:
[root@server ~]# yum install ImageMagick
[root@server ~]# yum install ImageMagick-devel
PHP-imagick:
[root@server ~]# yum install gcc (Please note: if it is already installed, then it will be updated if required)
[root@server ~]# yum install make automake
[root@server ~]# yum install php-pear
[root@server ~]# yum install php-devel
[root@server ~]# pecl install imagick
Now you will have to add the imagick extension in your PHP condifuration file:[root@server ~]# cd /etc/php.d/[root@server ~]# nano -w imagick.ini
Then you put following line in that file:extension = “imagick.so”..And save it with <CTRL> <O>After finishing this, you will have to restart Apache as follows: [root@server ~]# service httpd restart
I have new Linux server with CentOS 6.6 on it. I have tried to install Plesk version 12.0.18 on it.
During installation process from http://autoinstall.plesk.com/plesk-installer shell script I'm getting error:
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:09:44 CST 2014
***** problem report *****
ERROR while trying to SMB database not created
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
STOP Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:10:01 CST 2014: PROBLEMS FOUND
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:15:46 CST 2014
When I have tried to run command:
# /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
I'm getting errors:
---TRANSACTION 0 0, not started, process no 32603, OS thread id 139715979196160
MySQL thread id 38, query id 7054 localhost admin
SHOW ENGINE innodb status
--------
FILE I/O
--------
I/O thread 0 state: waiting for i/o request (insert buffer thread)
[Code] ....
I am trying to install Plesk 12.0 on fresh CentOS 6 (64bit). It goes as far as initialising the databases and then moans about missing files:/usr/bin/sw-engine: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I then install libpng
$ yum install libpng.x86_64
Re-run installer and hits next error - libfreetype:
/usr/bin/sw-engine: error while loading shared libraries: libfreetype.so.6: cannot open shared object file: No such file or directoryI have CentOS-base repo and Epel repo enabled.
Why are those files not being installed as dependencies by Plesk? Is this a bug ?
I want to update CentOS from:
Code:
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
to CentOS 7.
What steps I need to do to install CentOS 7?
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is:
2.6.6 (r266:84292, Jan 22 2014, 09:42:36)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
Tools & settings > plesk > updates & upgrades.
I tried to open updates & upgrades, with above flow, using the same username and password to log in the panel, on :8443, but the page said the username or password is not valid. attached screenshot....
When i go to https://ip:8447 i get the error
Can't connect to backend: No such file or directory
The source is locked and the "Store installation files in directory" is empty and i cant change it. The source gives an explantation:
"This field was locked by vendor. Enable it by removing 'SOURCE' option from Parallels Installer configuration file."
But where is the Installer configuration? I think i might have deleted this by accident and comparing files with another server didnt gave result.
[URL] .... doesn't list it either
/usr/local/psa/admin/sbin/autoinstaller
also doesn't have an option to get the current or default config.
I have tried to install multiple versions of PHP as described here: [URL] The option "Add/Remove Components" > "Web hosting features" > "Different PHP interpreters versions" is not available in the Parallels Installer. I am using Plesk 12.0.18 on CentOS release 6.6 (Final)
View 2 Replies View RelatedI can't login to Add or Remove Components - Parallels Installer
Before, when I made a clic on link, it was just loading options to add or remove components. Now, it takes me to a login page, with root user.
If I enter a bad password, it shows me an error
If I enter the correct root password, it returns to same login page again, without any error
I am using Plesk 11.0.9 Update #61
CentOS 6 x64
I recently installed an KASPERSKY ANTI-VIRUS trial. I stopped kaspersky app, with same result...
I'am unable to:
Plesk Control panel -> Tools and Settings -> Updates and Upgrade
Get:
Error: Unable to start Parallels Products Installer. The following error has occurred: Execution failed. Command: autoinstaller Arguments: Array ( [0] => --service-mode [1] => --enable-xml-output [2] => --ssl-cert [3] => /usr/local/psa/admin/conf/httpsd.pem [4] => --branch [5] => release,stable ) Details: file does not exist or is not executable: /usr/local/psa/admin/bin/autoinstallerClick to expand...
I am trying to update Plesk but whenever i try do so with the installer, the update fails because data is somehow added to /etc/apt/sources.list and sources cannot be read anymore. This happens both with the admin panel and the command lines.
Here is the command I'm running:
Code:
plesk installer --all-versions --select-product-id plesk --select-release-latest --show-components >/dev/null && plesk installer --version
Here is the output :
Code:
Doing restart of Parallels Installer...
File downloading products.inf3: 100% was finished.
File downloading plesk.inf3: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% was finished.
File downloading ppsmbe.inf3: 18%..79%..99%..100% was finished.
[Code] ....
And here is the content of my /etc/apt/sources.list file after the command is ran:
Code:
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin
bin:x:2:2:bin:/bin:/usr/sbin/nologin
sys:x:3:3:sys:/dev:/usr/sbin/nologin
sync:x:4:65534:sync:/bin:/bin/sync
games:x:5:60:games:/usr/games:/usr/sbin/nologin
[Code] ....
The piece of data above the sources keeps coming back everytime I run the command even though I'm deleting it.
Ok, new to Plesk, trying to move from ispconfig. So I have Plesk 12 running on Centos 6 64bit in a VPS. I figured out how to upgrade PHP and now I have installed my first website. The website is joomla based but I am getting the below error when installing components:
Warning
Copy failed.
JInstaller: :Install: Failed to copy file /var/www/vhosts/virtual-sim-racing.com/httpdocs/home/tmp/install_55081e65af5fe/pkg_kunena.xml to /var/www/vhosts/virtual-sim-racing.com/httpdocs/home/administrator/manifests/packages/pkg_kunena.xml
Package Install: Could not copy setup file.
This suggest to me a permissions issue - but what to do with it. I have checked all of the relevant Joomla folder permissions and they are all showing as writeable, so it looks like something outside of that?
I don't want to have to stick with ispconfig much longer ...
Here my msg. i get while trying to update via the Panel:
Code:
Unable to obtain the latest version of Parallels Installer: The required version '3.15.15' was not found on the server. This could happen because of configuration error at the download site. Failed to download the package
[URL] ....
The requested URL returned error: 404
Running Debian 7
PV: 11.5.30 Update #11
i downloaded [url]
and
[url]
from [url]
but how may i install it?
i read readme but ...
whenever one of my customers tries to install an application from the application installer, they get an error that looks like this.
Error: Installation of WordPress at http://*******.com/wordpress failed. Non-zero exit status returned by script. Output stream: 'PHP Warning: mysql_connect(): Access denied for user 'ndari_wordpres_7'@'aeris.jdrepo.com' (using password: YES) in /opt/psa/var/apspackages/apscatalogSTqEEM.zip7b3ca133-9714-5d/cache/scripts/db-util.php on line 66 '.
Error stream: 'PHP Warning: mysql_connect(): Access denied for user 'ndari_wordpres_7'@'aeris.jdrepo.com' (using password: YES) in /opt/psa/var/apspackages/apscatalogSTqEEM.zip7b3ca133-9714-5d/cache/scripts/db-util.php on line 66 '.Click to expand...
After each Plesk auto-update FTP server don't answer anymore.
We have to restart it with this commande line : /etc/init.d/xinetd restart
Under a Reseller's resources there are 3 options for Overuse:
1) Overuse is not allowed
2) Overuse of disk space and traffic is allowed
3) Overuse is allowed (not recommended)
All 3 apply to a Reseller's subscription.
Firstly, why should we care on the policy the reseller adopts for its subscriptions? It's nothing to do with us. The Overuse option for Resellers should aply to the Reseller account. But it doesn't. We have overusing resellers that are not getting suspended when the stats run like on Plesk 9.
This is broken.
my plesk control panel 11.5.30 has problems running the auto update of the panel. During the upgrade, the server reboots even after an error message appears that shows the following message: Can't parse /root/parallels/products.inf3: Error reading end tag.
View 4 Replies View Relatedafter the update i've got many errors in plesk panel, for example:
- change webhosting settings (like password, etc)
Internal error.
ERROR: Call to a member function getWebServerFPAdminSysUser() on a non-object (Apache.php:738)
- click on server components in server manager:
ERROR: Call to a member function getWebServerPackage() on a non-object (class.ServiceControl.php:76)
It seems last night Plesk ran any update and it failed. I received an mail with a link to the log, but I cant access Plesk Panel to see the log.
When trying to access Plesk, I get "502 Bad Gateway" Message.
Inside the Log there are many errors like:
Code:
2014/12/18 15:26:51 [crit] 14416#0: *3563 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxxxx:8443"
Is there any way to disable auto updates for plesk?
when somebody send email to hisname@hisdomain.com I'm getting that email in my mailbox (administrator email in Plesk settings).There is no CC or BCC in email recipient.I've tried to turn off the auto-reply and I'm not getting any emails.
View 10 Replies View RelatedOS : centos 6.5 2.6.32-431.23.3.el6.x86_64 actual plesk version 12.0.18 after auto-update google authentication and 3other extensions were enabled and now google authentication isn't in the list of installed extensions and not functioning i was able to login as before without google authentication but when I wanted to reinstall the extension catalog shows a empty screen I have ran /usr/local/psa/admin/sbin/autoinstaller --select-release-current --upgrade-installed-components & /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair no luck where to look or to reinstall the extention catalog ?
View 3 Replies View RelatedIs there any way to auto-delete all the messages in a specific mailbox on a specify domain on a daily basis? Using Postfix.
View 4 Replies View RelatedMail in the spam folder is supposed to be deleted after 30 days.
I have some mail that has been in the Spam folder for 40 days. Why hasn't it been auto-deleted?
how to automatically enable nginx by default for all domains/subscriptions and or even just as a whole since we do not use apache at all.
View 18 Replies View RelatedLast night the plesk auto updater ran an update. And i was wondering if others have had the same issue?
CentOS6, RHEL5 x64 Plesk 12 Unlimited
Detecting installed product components.
Gathering information about installed license key...
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[Code] .....
ERROR: The Yum utility failed to install the required packages.
Attention! Your software might be inoperable.
Please, contact product technical support.Click to expand...
