Plesk 11.x / Linux :: General Error 1030 - Can't Access Panel
Apr 11, 2015
the Error Code is :SQLSTATE[HY000]: General error: 1030 Got error -1 from storage engine Knowledge base says I am out of storage but I am not .But the output of command df -h returns this:
Restarting sw-cp-server doesn't shows any error.However , I was getting some problems with mysql socket and I wasn't able to use the plesk still then currently a custom installation of phpmyadmin lets me access the databases but I can't access any of my websites either (Wordpress). Apache returns 504 Gateway Error .
ERROR: Zend_Db_Statement_Exception: SQLSTATE[HY000]: General error: 126 Incorrect key file for table '/tmp/#sql_50f_0.MYI'; try to repair it (Pdo.php:234)
After upgrading to v12 i have no access to the plesk panel. The message above is shown.
I currently run a fair size forum which is running IPB and the new version recommends mysql 5.6. Therefore I decided to go ahead and get this installed. In the process I managed to mess up all my sites completely like a moron and at one point couldnt access anything running modcgi. Now I have fixed almost all of it
Problem: Problem I have now is that I cannot access the plesk panel no matter what I try. Firstly I could not restart the service as it said that the database was missing, and therefore I have restored the PSA database from a backup. The service now restarts however looks slightly different to how I would usually see the restart:-
Stopping sw-engine-fpm: [ OK ] Starting sw-engine-fpm: [ OK ]
However I cannot access the panel from the usual address. All I get is "Firefox can't establish a connection to the server at husky-owners.com:8443" . Im at a bit of a loss as to where to go from here.
Unable to read apache features from the service node: [Sat Jan 10 12:25:03.013856 2015] [so:warn] [pid 32541] AH01574: module actions_module is already loaded, skipping [Sat Jan 10 12:25:03.014058 2015] [so:warn] [pid 32541] AH01574: module auth_digest_module is already loaded, skipping [Sat Jan 10 12:25:03.014694 2015] [so:warn] [pid 32541] AH01574: module authz_user_module is already loaded, skipping
I have been a solid cPanel / WHM user for the past 2 years, we have now since downsized our hosting requirements and also wanted to cut our panel costs and so we moved to PLESK 12 Web Edition.The server is on a trial license and has been working fine with no problems for the past 2 weeks. Today all of a sudden none of the websites are accessible, although I can ping all IP's on server and login via SSH.I cannot access any websites or hosting control panel, I have disabled IP tables as this was the cause of a problem last time.
Why this happened was there an update at around 5AM this morning which could have caused this?I have restarted the server, I can successfully ping / resolve address from SSH.
Upgrading was started not half an hour ago from the time this post goes out, all went well until the MySQL was started up. At this point it is screaming at me because it cannot access it due to a missing password. This shouldn't be to much of an issue, as you just follow this post here, [URL] .... However.. when I did that this happened.
SQLSTATE[HY000] [1045] Access denied for user 'admin'@'localhost' (using password: YES)
I rent through OVH, so we don't get support access or anything. We just get a 15 site license and that's it so I don't know who to turn to for this.. I haven't ever touched anything in regards to SQL and the likes, all I did was click the upgrade button and this failed me. And now I've pretty much lost everything until this is resolved.
After a fresh install on a Debian Wheezy system, I get the following error(s) when trying to access the control panel.
https://sub.example.com:8443/ 404 Not Found Nginx
My log
Code: 2014/06/09 19:04:15 [warn] 32236#0: conflicting server name "" on 0.0.0.0:8443, ignored 2014/06/09 19:04:26 [error] 22597#0: *43 "/usr/share/html/index.html" is not found (2: No such file or directory), client: 68.51.77.126, server: , request: "GET / HTTP/1.1", host: "sub.example.com:8443"
I have a V-Server account with Strato and just upgraded to 12.0.18 through the panel updater. The installation completed successfully, at least the installer gave me no error.
After the installation I tried to login and got the following error (I wasn't able to enter my credentials..):
Which worked and I could now login. The Panel opened with the following error:
I can access certain areas of the panel without error (i.e. tools and settings etc, but I get the error when I try to access the control panel for single domains etc...)
I'm using Plesk 11 in a Ubuntu 12.04 Linux environment on a remote dedicated server. I am NOT trying to upgrade to Plesk 12. But, every time I log onto the panel, I get the error message shown on the subject line. Afterward, it says, "To solve this problem, send an update log to Parallels support." I have the update log ... but "where" to send it. Is there an email address? A webpage?
I have experiencing strange behaviour of Plesk admin panel. Actually there were a lot of issues similar with 500 Internal Server error but mine is a bit different..
This is the log came from the '/var/log/sw-cp-server/error_log'
As you can see there is a line starts with /bin/sh: /usr/share/sw-cp-server/applications-conf.sh: Permission denied and i tried to change this one for permission like 0755 or alternatives for a run but nothings changed. Btw i have plenty of disk space, it wasn't also the case.
I cannot even login with my domain name without 'https' and with the port 8880. It's again giving me the same issue.
BTW i want to give a little extra information; it was a long time that Plesk admin panel working but after today it's stuck in 500 Internal server error. What i tried today that to follow 'How to generate custom self-signed SSL certificates and apply it to Postfix: [URL] ....' , but after 6th step i was decied to stop because i couldnt find the root.pem file a minute and than i wanted to try on plesk and i saw the bad news I don't know it was related but i wanted to share.
Access_log and error_log are being rotated around 10AM daily for my server.
But for busy days access_log and error_log gets very big to inspect. Is there any way that I can manually reset the logs for the time being but without changing the daily rotation time?
We found 502 Bad Gateway error Nginx on multiple domain "currently troissoeursetunfrere.com is a wordpress site e-commerce" and also malittleboutique.com ecommerce wordpress, possibly to fix this problem we have followed this tutorial " [URL] ....
I've been with my Strato VServer and it installed Plesk on Linux a big problem.
I coming no longer in the Plesk Dashboard and the following code appears:
Syntax error or access violation: 1286 Unknown table engine 'InnoDB'
Here are the contents of my my.cnf
# # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports.
I seem to have an error with backing up to my personal FTP repository. I have only just noticed the issue, but i believe it originated when I upgraded Plesk Panel 11 to Plesk Panel 12. I am currently running version 12.0.18 on Cent OS 6.5.
Note whether i check the "Use passive mode" option makes no difference to my problem.Below is what I get from the panel.log under /usr/local/psa/admin/logs
I am using Parallels Plesk Panel v. 11.0.9 on a V-Server provided by Strato (Germany), the OS is Ubuntu 10.04 LTS. Established and running under Plesk is a MySQL-Database, administered via Plesk by PHPMyAdmin 3.5.8.1. PHPMyAdmin offers the following information:
Datenbank-Server
Server: Localhost via UNIX socket Software: MySQL Software-Version: 5.1.41-3ubuntu12.10 - (Ubuntu) Protokoll-Version: 10 Benutzer: admin@localhost Server Zeichensatz: UTF-8 Unicode (utf8) Webserver
sw-cp-server Datenbank-Client Version: libmysql - mysqlnd 5.0.8-dev - 20102224 - $Id: 731e5b87ba42146a687c29995d2dfd8b4e40b325 $ PHP-Erweiterung: mysql Click to expand...
my "Google Webmaster Tools" the other day and came across this in web crawl errors:
URL: [url]
Detail: General HTTP error
Problem Detected On: Sep 13, 2008
"Last updated Sep 16"
Does this mean it detected the problem on sep 13 and it has tried to access the page since then and has been unable to? I've been able to access the page fine between the 13th and 16th?
Anything i should be worried about? "Google last accessed my homepage on the 5th"...
Windows Server 2012r2 Plesk Panel 12.0.18 Update #36, last updated at Feb 20, 2015
my server running version 12 on win server 2012r2 of the panel. Sometime in the last few days something has changed and I can no longer load the Admin panel on ip:8443.
I can access the panel by using remote desktop into my server and loading it locally.
I also can not connect to the server using the mobile manager app or via telnet. If I disable the firewall in the Plesk panel it works fine so I checked my firewall but incoming on 8443 is allowed. It seems the firewall is blocking ports that were previously open as I can't remote access my MS SQL server either without switching the firewall off.
The only change I'm aware of since I last used the panel is the update #36 install. Not sure where to look next?
Health Monitor Module is installed and running on server, but not visible under Server Administration Panel > Home > Server Health on Plesk Panel 11.0.9 update #7. Is there a trick to configuring home to show it and/or a direct way to launch view of server health?
We are getting an error every time that i try to add a new IP on Plesk panel. I go to "Tool and settings" than "IP address", "Add ip address" on fields i already try to ip:
xx.xx.xx.xx/32 and xx.xx.xx.xx/submask
every time that i click on OK, the button become loading an never finish....
I have apache, php, and mysql setup on CentOS 4.4. I have phpMyAdmin running perfectly in a folder in /var/www/html/phpMyAdmin. I can access phpMyAdmin and use it perfectly. I downloaded Cacti which is a server monitoring application written in php, nothing special. I untar the file and it creates a folder, I simply do a mv command from /home/sys/cacti to /etc/www/html/cacti. Then when I open my browser and attempt to access: [url]I am getting a Access Denied error. It makes no sense though, I have verified the permissions of the files and folders, all good.
The group owner and owner are root, the files are all -rw-r--r-- and the folders are drwxr-xr-x.
I'm unable to access my plesk control panel .its giving this error "Unable to read Control Panel configuration file";tried all available solution for permissions but the problem remains.
I have 2 IPs for my vServer. Plesk automatically add both addresses to the Plesk Panel. One of the ip address I want to use for another service (openvpn). The Problem is, that i can't delete the IP from the Plesk panel.
I got the message: Fehler: String was provided for unescaped parameter host.
There are no reseller or customers who use this IP. So how can i solve this problem and delete the IP from the Panel?
I want to upgrade to Plesk 12, but want to make sure current version of 11.5.30 is working properly.Whenever Plesk tried to update I get the following error.Installing packages
Loaded plugins: fastestmirror, priorities, refresh-packagekit Loading mirror speeds from cached hostfile * atomic: www5.atomicorp.com * epel: mirror.compevo.com 437 packages excluded due to repository priority protections
[code]....
Fatal error during packages installation: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository. YumBaseError: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package. Check that the correct key URLs are configured for this repository.
ERROR: Failed to run the Yum utility.The Yum utility failed to install the required packages.
Does Plesk's own server, "sw-cp-server" use a different PHP binary than is used for hosted sites?I've found the .ini, /usr/local/psa/admin/conf/, but I can't figure out where the binary would be? I'm trying to run some WP-CLI commands, but some functions I have disabled in the default PHP.ini are required by WP-CLI.
