I have 2 IPs for my vServer. Plesk automatically add both addresses to the Plesk Panel. One of the ip address I want to use for another service (openvpn). The Problem is, that i can't delete the IP from the Plesk panel.
I got the message: Fehler: String was provided for unescaped parameter host.
There are no reseller or customers who use this IP. So how can i solve this problem and delete the IP from the Panel?
I can not delete only a Domain and replace it with a other Domain. There is just the possibility to delete the Domain incl. the data. The Problem is i have 2 Domains that point to the same root-directory. And now i was making a new website in a other directory. And now i want to use one of this domain for my new website. But i can't change it. Also if i change the document root, the website d'ont use the new domainname - it makes like a redirection to the old domainname.
Impossible to delete my PTR record (DNS) on a domain name. Message error: Impossible de restaurer la zone DNS : une erreur s'est produite en ajoutant l'enregistrement (IPv6 du serveur) IN none mondomaine.fr. : Des valeurs incorrectes ont été indiquées pour l'enregistrement DNS.
This happens when I try to add a new domain or when I am trying to remove a domain. It just hangs, the browser says waiting on server while plesk just hangs. This is a fresh new install of Plesk 12 as well. I added a bunch of new domains tonight. No crazy changes or anything to plesk. I have found nothing so far in my search.
My default certificate expired recently. I created a new certificate "default certificate 2".
I used this certificate for "Secure the Panel"
I went to "Tools and Settings" -> "IP addresses" and made this certificate the default for all the IPs. On the page "Tools and Settings" -> "SSL certificates", it says Used: 0 next to "default certificate".
But when I try to delete it, it tells me: "Error: Unable to remove certificates: one or several certificates are assigned to the IP addresses/domains."
Is there anywhere I can check where this certificate is still used?
I have done many tests and always fails.= Plesk 9.5 to Plesk 12 =
I perform a migration with several domains from Plesk 9.5 and Plesk 12, it runs well. Then I remove all the migrated domains in Plesk 12 server. Then I perform a new migration with the same domains from the same server with Plesk 9.5 to the same server with Plesk 12 and it fails.The reason is that Plesk 12 doesn't remove the databases attached to the subscriptions. The new migration tries to deploy the databases and it can't because the same databases with the same users are deployed already.
I tried to remove the databases with `plesk bin database` and it was not enough. Maybe the same error will show when you migrate from Plesk 11.5/12 to Plesk 12.
We have a lot of server with Plesk Panel 30 domains.We have migrated a website with a 2 Go disk space quota on a virtual server with Web Admin Plesk Panel License. So, we don't have field (or we don't find...) to update this value (or delete it). The website disk usage is now 2.1 Go. Every day, we have an email alert.
I cannot seem to find a conclusive answer to this. I use subdomains to create client websites then once they are in their own domains the subdomains still remain. Can I delete only the subdomain and leave all the files or at least leave the database since it is still connected to the new domain. Example below.
subdomain.example.com uses database1
newsite.com still uses database1
Is there a way to copy the database into the new domain?
Although running >> /usr/local/psa/bin/dns --info dev.sname.c002.aname.domain.com >> shows the 'ecz1' TXT record exists for "dev.sname.c002.aname.domain.com" : ... ecz1.dev.sname.c002.aname.domain.com. TXT ecz1
The issue can be caused by extra spaces in the TXT record:
Code: [root@a10-52-143-28 ~]# /usr/local/psa/bin/dns --add dev.sname.c002.aname.domain.com -txt 'ecz1 ' -domain ecz1 SUCCESS: Creation of DNS record in Domain 'dev.sname.c002.aname.domain.com' complete. [root@a10-52-143-28 ~]# /usr/local/psa/bin/dns --del dev.sname.c002.aname.domain.com -txt 'ecz1' -domain ecz1 Unable to del record in DNS server: unable to find DNS record
In the following example I have 3 such TXT records with 3, 5, 7 extra spaces and remove record with 3 spaces:
Code: [root@a10-52-143-28 ~]# mysql -u admin -p`cat /etc/psa/.psa.shadow` psa -e "select host, val, (length(val) - length(rtrim(val))) as extraspaces from dns_recs where host='ecz1.dev.sname.c002.aname.domain.com.' and val like 'ecz1%'" +---------------------------------------+-------------+-------------+ | host | val | extraspaces | +---------------------------------------+-------------+-------------+ | ecz1.dev.sname.c002.aname.domain.com. | ecz1 | 5 | | ecz1.dev.sname.c002.aname.domain.com. | ecz1 | 3 |
I think the wrong text is displayed for the option "Remove Domain Alias".
In Plesk 11.5.30 Update #13, in a Webspace, on the Websites & Domains tab, if I click an alias, a window appears for the alias with the option to "Remove Domain Alias". If I move the cursor over the text "Remove Domain Alias", or click on the link, I see a pop-up: Removing this website will also delete all related files, directories, and web applications from the server.
I think this is incorrect because removing an alias should not remove any files, directories, and web applications.
I want to upgrade to Plesk 12, but want to make sure current version of 11.5.30 is working properly.Whenever Plesk tried to update I get the following error.Installing packages
Loaded plugins: fastestmirror, priorities, refresh-packagekit Loading mirror speeds from cached hostfile * atomic: www5.atomicorp.com * epel: mirror.compevo.com 437 packages excluded due to repository priority protections
Fatal error during packages installation: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository. YumBaseError: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package. Check that the correct key URLs are configured for this repository.
ERROR: Failed to run the Yum utility.The Yum utility failed to install the required packages.
Does Plesk's own server, "sw-cp-server" use a different PHP binary than is used for hosted sites?I've found the .ini, /usr/local/psa/admin/conf/, but I can't figure out where the binary would be? I'm trying to run some WP-CLI commands, but some functions I have disabled in the default PHP.ini are required by WP-CLI.
After having some issues with my server mail program i read an article online where i though removing psa-courier-imap will resolve my mail problems.
Now nor my email is working but also i lost my plesk panel. Going to plesk ip address there's nothing anymore.Checked my server and is printing i have plesk 11.0.9 installed but is nowhere to find. I try to install psa-courier-imap again but yum cant find it.
Everything working on the server including all sites are available on the web.The only think i'm missing is the Plesk login page.
Code: General ============================= Domain name: bernhardlinz.de Owner's contact name: Bernhard Linz (admin) Domain status: OK
I can see the domain under "Mails" and also create new mail accounts. There are no Errors for this under
As i try to add the domain first i got a
Code: [11-Jul-2014 21:41:35 Europe/Berlin] PleskUtilException: mailmng-outgoing failed: ERROR:outgoing:database disk image is malformed
Which I removed with the
Command I found in the Plesk forum. After that i could add the domain.
I try a add another fantasy domain - also works but alos not displaying in Panel "Websites & Domains"
I take a look at the Plesk-Database "psa" with the Build-In "phpMyAdmin"
I take a look at the table "domains" and it looks like the other entries.
The Server was restored a few days before from a Backup. After the restore i had have the problem the "mysql" service did not start. I fixed the problem with the description from [URL] ... (Start mysql in recoverymode, export all data, delete the content of the whole mysql folder /var/lib/mysql folder, init new database and import the exported data). After that all looks fine.
Following the update from 11 to Plesk 12 (and installing latest Ubuntu fixes), the Plesk panel access is broken. Welcome page says:Can not load key: key is empty.And of course, no way to login the mgt interface. All services appear up, so this is only affecting the panel web service.
Fishing out the panel.log, it appears to be at a lower level than I initially thought (see below): experiencing issues after updating from 11 to 12 on Ubuntu (12)?
[18-May-2015 19:46:34 Europe/Berlin] PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285 [18-May-2015 19:46:34 Europe/Berlin] Exception: PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285 file: /opt/psa/admin/plib/Smb/Exception/Syntax.php line: 56
On one CentOS 6.5 Plesk 12.0.18 install (with all MUs applied) each time an admin logs in a notification is displayed ("Plesk was successfully updated. View detailed information on the updates.") and once a week the panel generates an email notification (Plesk panel updated successfully).
Other Plesk 12.0.18 servers that are set to automatically update aren't generating this email notification or displaying the "green" notification upon login to the Plesk Panel. Is there a flag, tmp file, or a DB trigger that isn't being set properly to cause this?
I just want to remove plesk and installed again. i saw (URL...) this page. use this code but plesk not removed. my sites are gone.how can i get back my site? what i should install.When i try install plesk 12 says you already install version 11.0.9
I have a server which I am using for multiple clients. Some with SSL enabled, some without. I have added custom ngingx conf files for nginxDomainVirtualHost.php and nginxWebmailPartial.php in /usr/local/psa/admin/conf/templates/custom and modified the following lines to try and harden security:
I check in /etc/nginx/plesk.conf.d/vhosts/<domain>.conf and the changes are shown correctly there but browsers and online tools such as [URL] .... still say that the sites are using 128 bit encryption and TLS 1.0.
The Plesk admin panel itself displays 256 bit encryption and TLS 1.2.
After a fresh install on a Debian Wheezy system, I get the following error(s) when trying to access the control panel.
https://sub.example.com:8443/ 404 Not Found Nginx
Code: 2014/06/09 19:04:15 [warn] 32236#0: conflicting server name "" on 0.0.0.0:8443, ignored 2014/06/09 19:04:26 [error] 22597#0: *43 "/usr/share/html/index.html" is not found (2: No such file or directory), client: 22.214.171.124, server: , request: "GET / HTTP/1.1", host: "sub.example.com:8443"