Plesk 12.x / Linux :: Client Intended To Send Too Large Body
May 11, 2015
I have been using Plesk for a while on my server, but this is the first time that I need to set up large files uploading for a client who requires to upload via a form files that are larger than 128MB (but less than 400).The issue I've been seeing is that whenever the user tries to upload a file greater than 128MB I see an error on the proxy_error_log that says:
2015/05/10 21:46:18 [error] 31224#0: *9 client intended to send too large body: 175420278 bytes, client: XX.XX.XX.XX, server: myserver.com , request: "POST /admin/products/1 HTTP/1.1", host: "myserver.com", referrer: "referrer"
I've been googling this issue and everything points to the nginx configuration (PHP parameters have already been set up). I proceeded to change the configuration of /etc/nginx/nginx.conf to include
http {
...
client_max_body_size 400M;
...
}
HOWEVER (and this is where I'm stuck) after restarting the nginx service, the fille /etc/nginx/plesk.conf.d/vhosts/myserver.com.conf continues to hold the value:
server {
...
client_max_body_size 128m;
...
}
Modifying this file to change the 128m to 400m does not make a difference.
I'm having a hard time configuring this setting for nginx on a domain, whatever i try i cant get it to accept files as big as I need. Every time i try i get this red message :
Code: Configuration Nginx non valide : nginx: [emerg] "client_max_body_size" directive is duplicate in /var/www/vhosts/system/domain.fr/conf/vhost_nginx.conf:4 nginx: configuration file /etc/nginx/nginx.conf test failed
I followed these instructions: [URL] ....
Strange thing is there was no panel.ini file where the instructions are pointing so i created one, but still, i cant get that directive to work.
Before plesk 12 (with 11.5) i finally got it to work by manually editing some nginx conf file on the server, but i can't find anymore how...
I have been trying quite unsuccessfully to import a large sql db file via phpMyAdmin for one of my clients. Since the db file is about 250mb I get a server timeout error.how I can do this via SSH...I have a CentOS server 6.5, 64 bit that runs Plesk v 12.0.18
I'm on a VPS with Ubuntu 14.04 and Plesk 12 Web Admin Edition. I can't import a large (20 MB zipped) database dump to phpmyadmin because there is a 2MB file size limit. I suppose I have to change the server-wide PHP configuration (if I change the PHP settings for the domain nothing happens). Is there a way to change the global PHP settings via the Plesk panel?
I've got a one month stable setup running a cpanel + apache 1.3.x and suddenly starting yesterday i get these errors from time to time in the log from various IPs:
(104) Connection reset by peer: client stopped connection before send mmap completed
(32) Broken pipe: client stopped connection before send mmap completed
send mmap timed out
Googling shows people guessing at everything from mysql errors to the visitor clicking a link on a partially showing page before it's completed.
Anyone with more clear insight? Mysql shows no apparent errors.
Site is a heavily loaded wordpress setup with mod_gzip the only major addition to apache. Also running a firewall for a week now. Errors did not show up until yesterday.
The FTP on my VPs running centos 6.6 and plesk 12.0.18 Update #44 has stopped allowing FTP conections via filezilla or dreamweaver. My tech knowledge with server management outside of the gui is minimal but i have done the following. Checked that the firwall is allowing ftp traffic through the GUI in plesk.
restarted xinetd and checked status [root@367549 ~]# service xinetd status xinetd (pid 11707) is running... [root@367549 ~]# lsof -i tcp:21 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME xinetd 11707 root 5u IPv6 682472 0t0 TCP *:ftp (LISTEN)
Then tried the following [root@367549 ~]# ftp localhost -bash: ftp: command not found
But i can connect via telnet on port 21
when trying to use +dreamweaver or filezilla i get the following. This may be due to one or more of the following reasons: - The network cable is unplugged or the network is down. Please verify that the network cable is connected and that the network is up. - The FTP server is down. Please verify that you can connect to the FTP server using another FTP program. - The FTP host name is incorrect. Please verify that the host name is correct in the Site definition dialog box. - Accessing the server requires proxy settings that aren't properly set. Please verify that the proxy settings in the Site category of the Preferences dialog box are properly set, and that the Use Proxy option in the Site definition dialog box is selected. - You may need to connect to the server using a different port than the one provided. Please specify the correct port in the box provided.
Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out Error: Connection timed out after 20 seconds of inactivity Error: Failed to retrieve directory listin.
What to do and why after no change this just stopped working when ive been using ftp on this server previous.. the company that i brought the vps from have no intrest and tell me its unmanaged.
Domain has PHP Settings in Plesk set to 2G and I get this error when uploading a 48MB file using Wordpress. I assume I need ot modify this manually in conf file somewhere to allow uploading large files?
Requested content-length of 48443338 is larger than the configured limit of 10240000..
mod_fcgid: error reading data, FastCGI server closed connection...
i would like to move few clients from my old linux VPS that runs on Cpanel .. to my new windows VPS tat runs Plesk .. you see there were several attempts by new provider .. they cant guarantee that accounts can be fully migrated even manually they only copied site files to new server .. the client account's still running on linux vps cpanel, they are intact .. clients dont have any php or mysql files they are just plain HTML and Flash files .. i can move site files .. im concerned about mail accounts and emails that already in my clients inbox (they are using IMAP accounts) .. do you guys know any guideline or step by step how to migrate my clients
P.S. please consider me as an uneducated person .. my background is designing not programming or network administration.
All new domains (sites) only display the Parallels page. Upgraded to the following ...
OS CentOS 6.5 (Final) Plesk version 12.0.18 Update #6, last updated at July 3, 2014 06:56 AM The system is up-to-date; last checked at June 27, 2014 04:43 AM​
Pretty sure it is a permissions problem, have tried chown -R domain.com.au domain.com.au and returns invalid user.
Can now FTP, use webmail, preview the site and have uploaded a pretty big site .... the Paraellels site displays it as 0mb disk space used and only displays the default Parallels place holder.
This is what a new domain name is displaying ######################################
Files listed in the file manager ######################################
Files uploaded using Filezilla FTP program ######################################
Default place holder ... can't display any other page. ######################################
Have checked all DNS settings and they match the other domains.
I have completed email set up on my server and have checked that email ports are open, but for some reason outlook keeps returning : "Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that you DNS settings in the Network pane of System Preferences are correct."
The odd thing is that outlook still picks up emails if I receive any, but keeps returning above error every minute.
I migrate from plesk 9.5 to another server with plesk 12.0.18, and then outlook and mail default from iphone don't work, but tunderbird and webmail work well.
In outlook when i put the same configuration than tunderbird and i try to send mail out from my domain said this error:
I'm using Parallels Plesk 12.0 and a mysql-Server.
I'm logged in with a customer's account into his phpmyadmin. Whenever a client connects to his website (which uses the database of his account) I get logged out and receive a "session expired" error. When I log in again I get "there's already a user with your username logged in".
I created a New Client Default Domain by copying plesk's original Default Domain.This template is for clients we move from older versions of plesk up to servers with plesk 12.x. Under resources for that "Service Plan Name"
I have Sites published with Presence Builder set to 0 and.Allow customer to create trial Presence Builder websites. Not checked.When I log in as the client I still see Presence Builder with edit Website.I also confirmed the correct plan was picked for that subscription by picking the new "New Client Default Domain" and under add-on plans I picked "remove"
But when I log in as the "client" to see what they would see I see Presence Builder and Edit Website available.How do I get rid of that selection?I can see a client clicking on it and basically over writing their current website.
I host a number of large sites (20GB+) on my VPS server running Centos6 and Plesk Panel 12. Due to the large sites I don't want to keep multiple backups on the actual server because it would take too much disk space. When I create a backup to the server's repository all is good, but when I click the green arrow to download the backup it takes a long time and then it fails with a timeout error. On some smaller sites it takes a while but eventually downloads the tar.
So my question: Is it possible to access the Server Repository via FTP? How and where would I set this up? Presumably it would be a better way to download these large archive files?
From admin account there is no problem to create databases.I`ve run bootstrap.sh repair successfully but still not working.Plesk 12.0.18 #55 Ubuntu Linux 10.04
The CRON service is running and works correctly, the Scheduled tasks on the administration Plesk Panel (tools & Setting / Scheduled tasks / root user) works ok, but when a customer sets a new scheduled task from her domain panel, don't works.
In plesk9 my customers had the option to send daily usage reports by e-mail. Only certain clients like this option. Using plesk11 I cannot find this option if I log in as a client. Has this feature been removed? And if so, can the administrator enable this option only for 1 or 2 clients?
This is applies to both Horde and roundcube webmail client software;
Using Plesk 11.5.30 with Horde 5.1.5 or roundcube 0.9.5 on CentOS Linux release 6.5 (Final).
We have seen this behavior occur on multiple servers.
Clients experienced slow to no response after executing a search, which eventually results in a failed to communicate with the server-error in the webmail client.
The Apache server log shows script time-out errors when searching larger mailboxes (i.e. larger than 950 MB), this does not happen on smaller mailboxes.
We have seen errors like the following in the Apache server error log with Horde (personal data like IP-address and domain name are x'ed out):
[Thu Jun 19 14:55:06 2014] [warn] [client xx.xxx.xxx.xxx] mod_fcgid: read data timeout in 45 seconds, referer: http://webmail.xxxxxxx.com/imp/dynamic.php?page=mailbox [Thu Jun 19 14:55:06 2014] [error] [client xx.xxx.xxx.xxx] Premature end of script headers: ajax.php, referer: http://webmail.xxxxxxx.com/imp/dynamic.php?page=mailbox
And with Roundcube:
[Tue Jun 17 13:02:04 2014] [warn] [client xx.xxx.xxx.xxx] mod_fcgid: read data timeout in 45 seconds, referer: https://webmail.xxxxxxxxxxx.com/?_t...d=19445&_mbox=INBOX&_caps=pdf=0,flash=1,tif=0 [Tue Jun 17 13:02:04 2014] [error] [client xx.xxx.xxx.xxx] Premature end of script headers: index.php, referer: https://webmail.xxxxxxxxxxx.com/?_t...d=19445&_mbox=INBOX&_caps=pdf=0,flash=1,tif=0
Steps to reproduce:
- use a large mailbox (950 MB or higher) - login to the webmail (Horde or roundcube) - do a search in the search field on the top right - the time-out error should appear in the server Apache error log (after at least 45 seconds)
This seems like an inefficiency or bug in the search query that searches the user's mailbox. Is there any other way we can prevent this issue and the error messages?
Started after last update 12.0.18 Update #44 (on CloudLinux): I can send mail wia created mailboxes, but sites can not send mail, contact forms say "Failed to send your message." maillog file also do not indicate sending any messages from domains. Wordpress restore password claims:
"The e-mail could not be sent. Possible reason: your host may have disabled the mail() function." php.ini is default: safe_mode = Off disable_functions = is empty
The issue about not sending mail from domains was - old versions of LVE anf CageFS are incompatible with latest plesk update, updating them caused all sites in Cagefs to throw error 500 with log string: "SecureLVE jail error Invalid regexps: no match for path to base home directory". It was fixed by changing cagefs.base.home.dirs regexp to the real sites folder location. Enabling cagefs back removed one of the files it shouldn't:
"Removed file /var/cagefs/81/xxx/etc/php.d/soap.ini" So be carefull to place necesssary files back. For now everything works. Click to expand... Click for original message
i have one Mailbox on my server, which i cannot sending mails. I tested it with Outlook and Horde.
For Example, i see this error at the Maillog:
Code:
Jul 14 22:12:13 gaius postfix/cleanup[12194]: 2F653402A6: milter-reject: END-OF-MESSAGE from localhost[127.0.0.1]: 5.7.0 The message could not be sent. You are not allowed to use sendmail utility.; from=<user@server1.local> to=<user2@server.local> proto=ESMTP helo=<gaius.stefanshome.com>
I delete this Mailbox, but after a time, i have the same problem again. On the Plesk Webinterface there is no problem logging with the outgoing spam protection.
I just moved from DirectAdmin to Parallels Plesk and already love the interface. Much better than DA in my opinion.
Let's get to the problem:
When I make a new email account I can login to this account on webmail.domain.com (roundcube) and receive and send emails. Now when I want to use this account on Apple Mail i'm not sure which ports I need to use.
For the incoming mail server I use: 143 For the outgoing mail server I use: 587
Now when I look at my mailbox it gives me a warning sign. The outgoing mail server gives a green dot, but the incoming mail server gives me a red dot.
- So sending mails works. - And receiving mails don't work.
I am using IMAP and have enabled the SSL box. I don't know if i need to check this, because i'm not running on an SSL certificate.
Are the ports that i'm using right? And should I enable the SSL checkbox?
i've a problem with my SMTP settings.The strange thing is that my drupal site, which is located on the server can send mails. But when i try to send from Gmail it does not work.
SMTP-Settings on Gmail Server: IP-Adress/ or Domainname Port: 25 User: E-Mail adress and password
I've also tryed several combinations, it still does nothing.Gmail is showing that it has send the Mail but after a few hours it arrives an email that says:
Action: failed Status: 4.3.0 Diagnostic-Code: X-Postfix; local data error while talking to smtp.mailchannels.net[54.214. 243.124]
I have a problem with file upload. I changed php.ini files in /etc/php5/cgi and user and php.ini to work with big files. I changed accordingly max_filesize, post_max_size, memory_limit.Also changed suhosin memory_limit and some other stuffs. I cant get files bigger than ~100MB to be sent through forms with post! Below is ok.Is there any method to do this with plesk 11.5?? I saw docs on this particular topics with plesk 10 on internet but nothing for plesk 11.
