I have Plesk 12 with Centos 7.1. When I have to send emails with my IP gives error:
Subject 'Tews'
Server: 'smtp.xxxxxxxxx.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure (SSL): No
Socket Error: 10060
However any other IP I can send emails. How do I fix this?
Started after last update 12.0.18 Update #44 (on CloudLinux): I can send mail wia created mailboxes, but sites can not send mail, contact forms say "Failed to send your message." maillog file also do not indicate sending any messages from domains. Wordpress restore password claims:
"The e-mail could not be sent.
Possible reason: your host may have disabled the mail() function."
php.ini is default:
safe_mode = Off
disable_functions = is empty
The issue about not sending mail from domains was - old versions of LVE anf CageFS are incompatible with latest plesk update, updating them caused all sites in Cagefs to throw error 500 with log string: "SecureLVE jail error Invalid regexps: no match for path to base home directory". It was fixed by changing cagefs.base.home.dirs regexp to the real sites folder location. Enabling cagefs back removed one of the files it shouldn't:
"Removed file /var/cagefs/81/xxx/etc/php.d/soap.ini"
So be carefull to place necesssary files back.
For now everything works.
Click to expand...
Click for original message
I just moved from DirectAdmin to Parallels Plesk and already love the interface. Much better than DA in my opinion.
Let's get to the problem:
When I make a new email account I can login to this account on webmail.domain.com (roundcube) and receive and send emails. Now when I want to use this account on Apple Mail i'm not sure which ports I need to use.
For the incoming mail server I use: 143
For the outgoing mail server I use: 587
Now when I look at my mailbox it gives me a warning sign. The outgoing mail server gives a green dot, but the incoming mail server gives me a red dot.
- So sending mails works.
- And receiving mails don't work.
I am using IMAP and have enabled the SSL box. I don't know if i need to check this, because i'm not running on an SSL certificate.
Are the ports that i'm using right? And should I enable the SSL checkbox?
I had made the backups of subscription and of whole plesk too and migrate it to other server. It seems all to be fine, but I cannot send or receive emails In Tools & Settings -> Server-Wide Mail Settings - > Mail Queue I see all mails stored there. The IPs was changed yesterday, and now I can see that WHOIS Infos was chanfed too, the domains are online.
On old server I had no problem with sending of emails (post), it is stil on, because I had not by all domains changed the DNS-Records yet.
I recently installed a plesk on a vps in OVH hosting, and after that i installed a new domain on it. I'm getting errors sending emails and some email providers return them or consider them as spam.
I attach the errors on mxtoolbox.com
We have installed the latest version of Plesk on our server. Our web applications work fine. But we can not send or receive emails. Neither the webmail (login failed) nor pop3 / imap and mail forms on web projects.
openSuse 13.1
Plesk 12.0.18 Update # 23
Mail Server: Postfix
Imap / pop3 server: Courier-Imap
Webmail: Horde
It seems I am not getting any emails from plesk, like scheduled event notifications, ect.
What function of plesk can I run to force it to send an email so I can troubleshoot why I am not getting emails from plesk?
i have one Mailbox on my server, which i cannot sending mails. I tested it with Outlook and Horde.
For Example, i see this error at the Maillog:
Code:
Jul 14 22:12:13 gaius postfix/cleanup[12194]: 2F653402A6: milter-reject: END-OF-MESSAGE from localhost[127.0.0.1]: 5.7.0 The message could not be sent. You are not allowed to use sendmail utility.; from=<user@server1.local> to=<user2@server.local> proto=ESMTP helo=<gaius.stefanshome.com>
I delete this Mailbox, but after a time, i have the same problem again. On the Plesk Webinterface there is no problem logging with the outgoing spam protection.
I am sending mailing but I need send the emails more quickly. How can i configure this?
View 5 Replies View Relatedi've a problem with my SMTP settings.The strange thing is that my drupal site, which is located on the server can send mails. But when i try to send from Gmail it does not work.
SMTP-Settings on Gmail
Server: IP-Adress/ or Domainname
Port: 25
User: E-Mail adress
and password
I've also tryed several combinations, it still does nothing.Gmail is showing that it has send the Mail but after a few hours it arrives an email that says:
Action: failed
Status: 4.3.0
Diagnostic-Code: X-Postfix; local data error while talking to
smtp.mailchannels.net[54.214.
243.124]
I have a problem with file upload. I changed php.ini files in /etc/php5/cgi and user and php.ini to work with big files. I changed accordingly max_filesize, post_max_size, memory_limit.Also changed suhosin memory_limit and some other stuffs. I cant get files bigger than ~100MB to be sent through forms with post! Below is ok.Is there any method to do this with plesk 11.5?? I saw docs on this particular topics with plesk 10 on internet but nothing for plesk 11.
View 8 Replies View RelatedI want to send a notification (by an email to SMS gateway) when a specific email arrives. I see that Roundcube has a sieve filter option called "Send Notification" and it has three input boxes which have no tooltips and I am unable to find any documents telling me what to fill in those boxes.
The boxes are:
Method
Options
Message
The Message is obvious enough, but the other two?
For the method, I tried mailto:<me@myemailaddress.com>
I left the options blank, typed in a short message and tried to save the filter, but it gave me an error message "Unable to save filter - server error occurred". Annoyingly, it then wiped out what I had typed and started me with a blank rule again. I also tried without the < and > round the email address.
Any clues as to proper syntax and what the options are?
Also, is it necessary to have another action after the Send Notification action to file the email away somewhere, or will it just be left in the inbox anyway if the only action is the notification?
i have php forms and somes notifications from OSSEC and plesk server, but i can't receive these mail :
my configuration is plesk 12.0.18
Postfix
dovecot
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases, hash:/var/spool/postfix/plesk/aliases
command_directory = /usr/sbin
[Code].....
I have a problem to send email to idn domain names.
The error that I have is
Validation failed for: xxx@xxx [pid 111655 on line 754 of "/usr/share/psa-horde/imp/lib/Compose.php"]
I'm running Plesk 12.0.18 update 39 on Centos 6.6 with postfix and courier-IMAP
However I can't send emails from mobile devices or outlook - the security settings are invalid, I've tried all 4, SSL, SSL/TLS Accept all certs, Start TLS etc.
I use postfix/smtp plesk12 centos7, I create mailbox add password. For example my domain is a.com from roundcube all work no problem.
My script isn't working look like this:
SMTP CONFIGURATION (LEAVE DEFAULT IF YOU USE mail() )
SMTP HOST smtp.a.com
SMTP PORT 587
SMTP Secure tls
SMTP Auth true
SMTP USERNAME test@a.com
SMTP PASSWORD my password
And the script dont send emails to user, say that Mailer Error: SMTP connect() failed. In dns settings I don't have smtpa.com host only have mail.a.com why from scripts don't send email to users?
Since updating from Plesk V11, Plesk is sending out an e-mail with date.time information to all my customers. I have not changed anything to my settings.
View 1 Replies View RelatedMy environment: Parallels Plesk v12.0.18_build1200140606.15 os_Debian 7.0 64bits - postfix
In documentation about Server-wide-mail settings
In Plesk for Linux with the Postfix mail server, you can change the IP address used for sending mail. Also, if your server sends mail from domain IP addresses, you can specify which name will be used as a host name in SMTP greetings.
Choose from the three options:
◦Send from domain IP addresses. By default, mail from each domain is sent using the domain's IP address. The host name used in SMTP greeting is defined by the configuration of the mail server.
◦Send from domain IP addresses and use domain names in SMTP greeting. If selected, Plesk changes the mail server configuration so that the SMTP greeting will contain the name of the domain from which an email message is sent.
This option prevent the sender's IP address from being put into public black lists, such as the Spamhaus or OpenBL lists. This might happen if the mail server host name is used in SMTP greeting for the messages sent from domain IP addresses. Some recipient servers consider such messages as spam.
We recommend that you use this option if you host less than 100 domains. In case of a large number of domains, using this option significantly increases the load on the server.
◦Send from the specified IP address. You might want to use certain IPv4 and IPv6 addresses for all outgoing mail.
Sending all mail from the specified address might be useful, for example, if the IP address of the mail server was put into public black lists, such as the Spamhaus or OpenBL lists. If you select None, outgoing mail will not be sent.Click to expand...
My Plesk Panel stopped to send notifications a while ago, I don't receive mails when the backup are done, the clients can't receive their passwords if they need to reset...
The mails are not being forwarded when they configure it in the panel (I receive a mail in mail1@mydomain.com and I want it forwarded automatically to mail2@gmail.com or wherever).
I don't see nothing about the plesk panel mail in the postfix log and I don't know what else to check.
If i select this option in Server-Wide Mail Settings, server still sends email trough main IP address.
View 2 Replies View RelatedAfter latest update to #34, all the users cannot send Attachments using Outlook due to timeout problems. It happens with Postfix, not Qmail.
View 3 Replies View RelatedEmails are not being sent from my Server,php n SMTP both, I have checked my IP's are not is spam lis, I'm unble to find out the reason,
View 12 Replies View Relatedim tryying to setup a forum, but i cannot use email verification, every time i try to send a email it gets bounced back with these details, no matter who i try to send to,hoster has changed to several ips wiht same prob?
This is the qmail-send program at mail.removed.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
<email removed>:
Connected to ?.?.?.? but sender was rejected.
Remote host said: 550 Your e-mail was rejected for policy reasons on this gateway.
Reasons for rejection may be related to content such as obscene language, graphics, or spam-like characteristics (or) other reputation problems. For sender troubleshooting information, please go to [url]. Please note: if you are an end-user please contact your E-mail/Internet Service Provider for assistance.
--- Below this line is a copy of the message.
Return-Path: <email removed>
Received: (qmail 2710 invoked by uid 48); 27 May 2007 18:15:42 +0100
Date: 27 May 2007 18:15:41 +0100
To: email removed
Subject: vBulletin Email Test
From: "email removed" <big@belley.fsnet.co.uk>
Message-ID: <200705271741.689d1b902386@www.pc-mod.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 8bit
X-Priority: 3
X-Mailer: vBulletin Mail via PHP
You are receiving this email because your email address was entered as an email test at Pc -Mod.
The first step of this email test script has been completed. However, a formatting test is still necessary:
A paragraph break.
A single line break.
Another paragraph break.
Another single line break.
Another single line break.
If the above lines look correct, you are finished. The email features on your server are setup correctly.
If this email is run together on one line, there is possibly a configuration error with your mail server. Please ensure it is configured correctly.
can anyone please help this is doing my hea din now. realy strange.
i know the server is rented from servers4you
An unknown error has occurred. Subject 'subject', Account: 'Lauren', Server: 'mail.lblah blahbs.com', Protocol: SMTP, Port: 25, Secure(SSL): No, Error Number: 0x800CCC0B
View 11 Replies View RelatedI am using latest version of PP12 and do not have the "Send from domain IP addresses." seeing showing in the Mail Settings page.
There is nothing shown between "Enable message submission" and the "Relay Options".
Yes, I am using Postfix.
What am I missing?
I have been using Plesk for a while on my server, but this is the first time that I need to set up large files uploading for a client who requires to upload via a form files that are larger than 128MB (but less than 400).The issue I've been seeing is that whenever the user tries to upload a file greater than 128MB I see an error on the proxy_error_log that says:
2015/05/10 21:46:18 [error] 31224#0: *9 client intended to send too large body: 175420278 bytes, client: XX.XX.XX.XX, server: myserver.com , request: "POST /admin/products/1 HTTP/1.1", host: "myserver.com", referrer: "referrer"
I've been googling this issue and everything points to the nginx configuration (PHP parameters have already been set up). I proceeded to change the configuration of /etc/nginx/nginx.conf to include
http {
...
client_max_body_size 400M;
...
}
HOWEVER (and this is where I'm stuck) after restarting the nginx service, the fille /etc/nginx/plesk.conf.d/vhosts/myserver.com.conf continues to hold the value:
server {
...
client_max_body_size 128m;
...
}
Modifying this file to change the 128m to 400m does not make a difference.
Plesk 12.0.18 #27
CentOS 7.0.1406
I have followed the instructions here to send Plesk notifications through External SMTP (overuse, new domain creation, etc): URL....Here is the error I see in the panel.log: ERR [panel] Unable to send mail.
Is there another log that I'm missing with a more detailed error? Sending through an external SMTP works fine on sites hosted on the same server (Wordpress, Joomla).
Whenever trying to send an email using roundcube it just seems to fail... No error code is given - see attached image:
I've tried following the article here: [URL] ....
But it didn't seem to work and incidentally the main.inc.php file didn't even exist only a main.inc.php.rpmnew was there. I tried copying it to main.inc.php but it made no difference. Normal SMTP usage via thunderbird works, and everything works when trying to use horde.... it's just a problem with roundcube after the upgrade from 11.5 to 12.
Running on CentOS 64
When i try to login from outllook pop3 is ok but smtp is error.
When i check mail log file:
Code:
Nov 4 16:28:07 server1 courier-pop3d: Connection, ip=[::ffff:176.43.150.48]
Nov 4 16:28:07 server1 courier-pop3d: LOGIN, user=test@xxxxxxxxxxxxx.com, ip=[::ffff:176.43.150.48], port=[23885]
Nov 4 16:28:07 server1 courier-pop3d: LOGOUT, user=test@xxxxxxxxxxxxx.com, ip=[::ffff:176.43.150.48], port=[23885], top=0, retr=0, rcvd=12, sent=39, time=0
[Code] ....
I try to past pci compliance,but now this is not importand. If there have some repair postfix command? Default configuration? Or how can i send emain from outlook.
The problem is, can not send mail via SMTP using popular scripts Opencart, SMF, Osclass. The problem was lapping Plesk 11.5 via 587 port. That was timeout connection or authorization error with the correct settings. Mail may be sent, sometimes not. No longer working than working. At the same time when working with e-mail clients(example, The Bat) work fine. In Plesk 12 same problem. Port 465 - e-mail clients(example, The Bat) work fine. But can not send mail via SMTP using popular scripts Opencart, SMF, Osclass. When using Cpanel with Exim - all work perfect. But the Plesk e-mail with Postfix - constant problems.
View 4 Replies View RelatedHow i can increase rate of send/minute for my campaigns of mail?
View 5 Replies View Related