Plesk Automation :: Email Alias Name Is Not Changed On Update

Jul 2, 2014

We have noticed that if we have created example@domain.tld email account and we create new domain alias for example alias.tld. We have already created email accounts for example@domain.tld and example@alias.tld.

Now, if we change email account name for example example2@domain.tld only mailbox for example2@domain.tld is updated, example@alias.tl is unchanged.

In this case if someone send email to example2@alias.tld email will not be delivered because alias mail name was not updated. We have noticed this error in PPA 11.1 and PPA 11.5.

View 1 Replies


ADVERTISEMENT

Plesk Automation :: Create Email Alias In API?

Feb 7, 2014

how to create email alias in plesk api.?

View 3 Replies View Related

Plesk 12.x / Linux :: After Migration No Alias Email And Webmail

Nov 17, 2014

I have recently migrated from one server with Plesk 11 to another server with Plesk 12 and cant get the alias emails work properly like they worked before the migration. I can send emails from any alias@alias.domain (via Outlook), but cant receive them.I can receive emails only from the mailbox email of the main domain, but not for the alias-email of that mailbox for an alias domain that worked well for Plesk 11. Where might be the problem?

I have created a webmail.domain.tld in the Webmail-Services (where it says Horde 6.2.1 is installed), but the webmail.maindomain.tld is not working. I get displayed only the "webservers default page". Webmail.maindomain.tld worked well in Plesk 11.There is also no "Webmail" link in the domain control pannel like it used to be in the Plesk 11.I have created a new abonnement with a new domain to test this, but there is no Webmail link for this abonnement as well.

You message for <alias@alias.tld> from 2014/11/17 could not be delivered. 4.0.0 smtp; 454 4.7.1 <alias@alias.tld>: Relay access denied

View 2 Replies View Related

Plesk Automation :: How To Update PPA To Show 5.4.x Rather Than 5.3.3

Dec 13, 2013

1) I've used yum to upgrade php on a linux from 5.3.3 to 5.4.21, how do i update PPA to show 5.4.x rather than 5.3.3 (ideally it should read the server on scheduled task to get version number)

2) On Windows VMs it installed PHP 4, PHP 5.2, 5.3, 5.4. How do i a) remove PHP 4 option.

3) How do I specify which should be the default PHP Version.

I am using PPA 11.5

View 5 Replies View Related

Plesk Automation :: PPA - Linux Web Servers - Yum Update

Feb 18, 2014

our our test setup. once we install a service node ie apache server, if i ssh to the server and type yum update i get the following:

Code:
[root@ppa-mysql1 ~]# yum update -y
Loaded plugins: dellsysid, fastestmirror, security
Loading mirror speeds from cached hostfile
* base: mirror.synergyworks.co.uk
* extras: mirror.sov.uk.goscomb.net
* updates: mirrors.coreix.net
Setting up Update Process

[code]....

this is the same on all PPA linux servers both web & mysql nodes.

View 1 Replies View Related

Plesk Automation :: PPA - Cannot Get Access To PGSQL After Update

Feb 6, 2014

I've managed to get so far through the update from 11.1 to 11.5

The updater was rerun after problems with corrupt data. Things seemed to be going well until it updated to PGSQL 9.1 and restarted

It appears to not to be able to get access

psql -h`hostname` -U plesk plesk

results in asking for a password, which it did not before and what the password would be for the plesk user.

View 3 Replies View Related

Plesk Automation :: Update MySQL Version Database Node

Jun 6, 2015

Is it possible to update the MySQL version on the db nodes from 5.1 to 5.5 or is it supported?

View 3 Replies View Related

Plesk Automation :: Update Hard Disk Memory Limit For The Created Subscription

Mar 3, 2014

Is any way to change hard disk memory limit for created subscription ? It is 4 Gb I have to increase it to 8 Gb.

View 1 Replies View Related

Plesk Automation :: Disable Email On Domain Entirely?

Jul 25, 2014

How do we disable email on the domain entirely? The client is hosting email externally - the offered spam filtering is wholely inadequate and we're seeing a few of these happening - to the point I'm considering offering externally hosted email plans anyway - but back to the problem - I need to delete the mailboxes and then disable mail - and then remove the DNS records for webmail etc - but can't seem to find how to turn off locally hosted email for a domain.

View 11 Replies View Related

Plesk Automation :: Prefix For MySQL / FTP And Email Accounts

Mar 14, 2014

I've configured PPA management, web server and a mysql database server. Now I want that if a customer add a mysql, ftp or mail account, that the names begins with a prefix that I've defined.

View 4 Replies View Related

Plesk Automation :: Move Single Domain Email To Another Node?

May 14, 2015

I have a full mail node and I have to move some domains on a different node without losing data . Is possible with PPA?

View 3 Replies View Related

Different Email Server Alias For Every Account

Aug 12, 2008

I have a VPS (vps.example.com) setup with few sub accounts set-up. All sub accounts can send emails using specified domain, however email header will always display my VPS's name.

for example:

"from localhost ([127.0.0.1] helo=example.NET) by vps.example.com"
Is it possible to set it up so every account has it's own server name for example:
smtp.example.net
mail.example.org
or vps.domain.com

Platform: Cent OS
panels:VZPP, WHM, cPanel
IP: total of 3, 2 used for name servers, can purchase more if needed.
Access: root level access.

View 0 Replies View Related

Plesk 12.x / Linux :: Send Email To All Domains Since Update

Jul 4, 2014

Since updating from Plesk V11, Plesk is sending out an e-mail with date.time information to all my customers. I have not changed anything to my settings.

View 1 Replies View Related

No Email Received After DNS Changed

Apr 13, 2009

I have a detected server and it host one domain with many sub domains account. I never used the cpanel DNS service, instead I used the hosting company’s DNS. .Everything was working fine (including the email) until I decided to have my own DNS. I used the domain register company DNS service to create a DNS records for the domain and all my sub-domains. The problem is the email did not work yet!! Here what I done with the DNS :

eg.com my domain and 1.1.1.1 the server IP address (e.g.)
Type--- Name ---- Domain -- Data ---Pref
A---- ---- eg.com ---- 1.1.1.1
A---- *. ---- eg.com ---- 1.1.1.1
A---- forum. ---- eg.com ---- 1.1.1.1
A---- mail. ---- eg.com ---- 1.1.1.1
MX---- ---- eg.com ---- 1.1.1.1----0
MX---- *. ---- eg.com ---- 1.1.1.1----0

I update the nameserver in the cpanel basic setup. It should work fine, I don’t know what goes wrong? I never touch the server configuration, the server was relay on external DNS service.

Here are the error that I got when I tried to send an email to the server :

info@eg.com
SMTP error from remote mail server after RCPT TO::
host mail.eg.com [1.1.1.1]:
550-Verification failed for ....

View 2 Replies View Related

Plesk 12.x / Linux :: Horde Admin Email Removed After Each Update?

Aug 26, 2014

Plesk 12.0.18#14, CentOS6.5

in order to have a Horde admin email we open
/etc/psa-webmail/horde/horde/conf.php

and change
$conf['auth']['admins'] = array();
into
$conf['auth']['admins'] = array('emailaddress@xyz.com');

Works fine. This change than reverses itself after every Plesk update incl micro updates. Are we editing the right file / is there an underlying one we should edit instead? Cannot find a setting in Plesk itself to configure a Horde admin email.

View 4 Replies View Related

Plesk 11.x / Windows :: Error On Create Email Address After Update To 11.5.3

Jan 8, 2014

when I create new email address get this error:

Error: Source: Microsoft OLE DB Provider for SQL Server
Description: 'encrypt' is not a recognized built-in function name.

View 1 Replies View Related

Plesk 11.x / Linux :: Domain Migration To New Server / What To Do With Email During DNS Update

Jun 4, 2014

I have upgraded to a new server and need to move all domains, users, and most important all email accounts to the new server.

Both servers run Plesk 11.0.9 on CentOS. The migration manager works great, no problems with that.

After migrating, I change my DNS settings at an external DNS provider to the new IP. The problem is, DNS changes take time. I then get emails on the old server and on the new server until DNS information is spread.

I was searching for a way to let the old server forward to the new one, but changes for specific domains in plesks DNS system (MX record) on the old server did not work. The mails still arrived at the old server.

What can i do? Can I uncheck "Activate mail service on domain" and will all emails be rejected until DNS points to the new server? Or will that lead to bounces?

View 1 Replies View Related

Plesk 12.x / Linux :: Error Message On Email Send Since Update 12.0.46

May 18, 2015

we regularly get this message in boxmail of adress used to send email from server.This is the mail system at host DOMAIN.fr. You can delete your own text from the attached returned message.The mail system

<1@SERVERNAME.HOSTER.com> (expanded from <1>): User unknown in virtual
alias table

If i look in maillog i see that :

May 18 16:48:52 SERVERNAME postfix/error[22737]: F22521B4E45: to=<1@SERVERNAME.HOSTER.com>, orig_to=<1>, relay=none, delay=0.07, delays=0.04/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table)

Just after that we can see email go normally :

May 18 16:48:59 SERVERNAME postfix/smtp[22736]: F22521B4E45: to=<EMAIL@DOMAIN.com>, relay=mx3.mail.icloud.com[17.158.8.50]:25, delay=7.3, delays=0.04/0.03/2.4/4.8, dsn=2.5.0, status=sent (250 2.5.0 Ok.)

The problem is in error message (at top) the message attached is the one sent to EMAIL@DOMAIN.com. So we can think the message is not sent to EMAIL@DOMAIN.com. SERVERNAME, HOSTER and EMAIL@DOMAIN are here to mask real data.

OS: Debian 7.7
Plesk version: 12.0.18 Update #46

View 15 Replies View Related

All CPanel & Email Passwords Changed PLUS Root

May 10, 2008

I got up today, went to check my emails and received invalid passwords on all my email accounts. I then went to check in the CPanels and get the same error when I try to login.

Then I try the root and same thing!

BUT all my linked FTP accounts work and the sites are online and working. One is giving a 500 error (cgi program) but besides that, they are all online w/ no changes.

My "host want to do a OS reinstall and let me try and restore my sites from a slave drive. I think thats stupid and shouldnt be needed.

They also automatically say I was hacked...Sure a hacker changed all the cpanel and email passwords but worked it so the linked FTP accounts would work and didnt take any sites offline.

View 4 Replies View Related

Plesk Automation :: Error While Installing Automation During (Getting SELinux) Step

Jul 5, 2013

I am trying to install Automation, and I keep getting an error after the "Getting SELinux" step, here is a log of the process so far:

Code:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-5-x86_64
[INFO]: Getting SELinux state...
[ERROR]: Unexpected error: ''

[Code] ....

I have tried running the installation on a different server and the same issue came up...

View 19 Replies View Related

Plesk Automation :: Failure To Install Automation On Centos 6.5

Apr 4, 2015

I am installing plesk automation on centos 6.5 using this command on a fresh system

./ppa_installer --password some_password --admin_email some_email

and get the following error.

[LOGTEE]: Error Downloading Packages:
[LOGTEE]:
[LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.

Looks like some lib is not found in the mirrors.

View 1 Replies View Related

Plesk Automation :: Automation Installer Breaks Yum In CentOS 6.6

Jan 29, 2015

On a clean install of CentOS 6.6 (Final) I did the following:

1. updated the /etc/hosts file to point my ip to the hostname

2. Open the ports in the iptables file.

3. ran the ppa_installer per the instructions on [URL] ....

The ppa_installer log says installed Successfully. However the following occurs:

1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)

2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:

There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short

Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the

current version of Python, which is:
2.6.6 (r266:84292, Jan 22 2014, 09:42:36)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]

I am now going to try Cent OS 6.4.. will report back.

View 8 Replies View Related

Domanin Alias In Plesk

Jun 19, 2009

I've a VPS with Plesk. I have a website running a website and I've got a second domain.

I wish to setup second domain and forward it to first domain. I've used doamin alias page. However when I call second URL it's displaying a default plesk page instant of my first URL.

View 1 Replies View Related

Plesk 12.x / Linux :: Alias Without Www Not Working

Aug 23, 2014

Configuration:
Config server / Preferred domain for web sites / domain.tld
Config hosting to domain / Preferred domain / domain.tld

Problem: I've created a primary domain.tld and work without problems I type www.domain.tld and work fine redirect to domain.tld format but I've created different alias and only work www.domain.tld format don't work domain.tld format.

In google webmastertools i see this error in domain.ltd panel

Redirect

HTTP/1.1 301 Moved Permanently
Server: nginx
Date: Fri, 22 Aug 2014 18:09:28 GMT
Content-Type: text/html; charset=UTF-8
Content-Length: 0
Connection: keep-alive
Location: http://www.domain.tld/
X-Powered-By: PleskLin
MS-Author-Via: DAV
Vary: User-Agent

How can solve to Alias work with domain.tld format?

View 1 Replies View Related

Plesk 12.x / Linux :: Where To Add Domain Alias

May 5, 2015

Plesk 12. Using the "Corporate/Business" -> "Power User view".

Where do you add a Domain Alias? The webspace has no option to add this and all documentation I've found so far seems to indicate there should be a button that says add domain or add domain alias.

View 2 Replies View Related

Plesk 12.x / Linux :: Domain Alias Without Www

Feb 16, 2015

I want to setup a domain alias without www in front of it. A quite simple task in the past...but not with Plesk 12. So I have a service domain (for example: service.com) that I use for ALL clients. But each client has only a subdomain of it as alias in his account. so client1.service.com, client2.service.com....and so on. And only that subdomain...nothing more...for each account. How to achieve that in Plesk 12?

View 1 Replies View Related

Plesk 12.x / Linux :: Domain With Ton Of Alias - Not Showing All Of Them

Sep 15, 2014

I have a domain that has a ton of alias domains in my panel.

If I get it to show "All" entries per page, change it to "Active List", and get back to "Classic List", they show up correctly.

Nevertheless, I have to do it every single time I log in to the panel.

Pagination also doesn't seem to work in 10, 25 and 100 entries if I don't do that.

That started happening after some update on version 12.

View 19 Replies View Related

Plesk 11.x / Windows :: Adding Domain Alias

Jun 10, 2013

I use Plesk 11.0.9 Update #53 on Windows 2008 SP2. Nameservers and mail server are external servers and fully working.I have a 'fake' web site (roundcube. local) in which I've successfully installed roundcube and I would use it as webmail.I've added a domain alias 'webmail2.domain.com' and it works like a charm.Now I've moved the main domain "domain.com" on the plesk server and I would like to add a 'webmail.domain.com' domain alias to the 'roundcube.local' website.If I try to do it, I receive this error:

"Error: Wrong prefix for domain alias"..Even if I try to add webmail.anotherdomain.com (not installed on the Plesk server) I get the same error.The error shows up either the host is configured to the Plesk machine or not.If I set the binding directly in IIS it works but I'd like to use the plesk to do this.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved