Plesk Automation :: Update MySQL Version Database Node
Jun 6, 2015Is it possible to update the MySQL version on the db nodes from 5.1 to 5.5 or is it supported?
View 3 Replies
ADVERTISEMENT
Plesk Automation :: Cloud Server Hardware Node As Backup Server Node
Apr 11, 2015We have one Cloud Server hardware node that exists only as the backup location for containers and VMs in Cloud Server/PVA (it hosts no virtual servers). Can it also serve as a Backup Server Node?
A related question, in my case, is whether we can configure a Backup Server Node to use a particular drive/mount/directory, as we can with PVA? I couldn't find any info in the docs about any settings at all for the Backup Server Node.
Plesk Automation :: Local Server Visible When Adding New MySQL Database
Mar 27, 2014Somehow when customers add a new MySQL database they can select a Local MySQL server. It turns out this is the MySQL instance running on the CP server, can I somehow hide this server from the list?
View 1 Replies View RelatedPlesk Automation :: AWS And PPA Node Setup?
Sep 4, 2014Any workaround for AWS and adding nodes for PPA. Since the AWS instances use key pairs for root access you can't ssh as root with a password.
View 3 Replies View RelatedPlesk Automation :: Cannot Add New Service Node
May 16, 2014We are trying to add new service node but when we are trying to finish procedure we receive error: The usage of the resource "IP addresses" for subscription with ID "1" exceeds the value of "0".
We do not have a such subscription using ID "1". As I can see this is the ID in database for "Parallels Automation License Key", but it has unlimited license key and have already two nodes attached.
Plesk Automation :: Rebooting A Node In PPA?
Jun 4, 2014Are there any special practices to reboot a node in PPA?
So far a simple "shutdown -r now" hasn't broken anything but I want to make sure PPA doesn't make assumptions about the nodes being up at any point. (both management and service)...
Plesk Automation :: IIS Node Password Change
Feb 18, 2014How to change IIS password after node is added to PPA using wizard..There is no option to change password after adding the service node.
View 2 Replies View RelatedPlesk Automation :: Install Services On Management Node
Mar 18, 2014it is possible to run services such as Apache, Mail, MySQL etc on the Management Node.
I have PBAS setup and have registered the PPA server with PBAS, the PPA Management Node is marked as ready to provide, I have added the appropriate attributes to the MN under Service Nodes, however according to PBAS I need to install the ppa_apache package (and probably others), and when I go to install the packages it's trying to install the ppa_agent package which is conflicting with ppa_core.
Plesk Automation :: Impossible To Install Service Node
Jun 15, 2015I have a problem to install a service node. In task, I have this error:
Unable to authenticate at the host '10.252.13.197'. To resolve this issue, please follow the instructions at [URL] ....
I followed the instructions, but mysql don't display my new server.
[root@plesk000-exp-01 ~]# mysql -uadmin -p`cat /etc/psa/.psa.shadow` psa -e 'select accessKey from ServiceNodes where ipAddress="10.252.13.197";'
[root@plesk000-exp-01 ~]#
I deleted service node but the problem still remains.
Plesk Automation :: Backup Server Node With Two Disks
Jun 10, 2015Due to data center limitations, I am restricted to 100GB on my primary disk but can have up to 2TB on a second disk.Is it possible to have the backup node use the second disk instead of the primary disk?Also is it possible to have multiple to have multiple backup nodes?
View 3 Replies View RelatedPlesk Automation :: Watchdog Extension For PPA Service Node
Apr 24, 2014install such extension as Watchdog (available on PPP) on PPA Service nodes (or maybe as a Watchdog Server on Management node)?
View 2 Replies View RelatedPlesk Automation :: Adding A Service Node - SAXParseException
Mar 19, 2014I have some problems adding a database and a webserver service-node:
Mar 19 13:44:13 plesk-db : DBG [SYSTEM 4:6600:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'.
Mar 19 13:45:50 plesk-www : DBG [SYSTEM 3:9054:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'.
Content of the service_config.xml
Code:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<!DOCTYPE SERVICE_CONFIG PUBLIC "SM" "SM 1.0">
<SERVICE_CONFIG/>
Plesk Automation :: Use Mail Node With Spam Filtering Appliance
May 20, 2014We want to configure our PPA mail node to send all outbound mail through our spam filtering appliance but don't know where to start.
Reading standard Postfix docs give basic instructions on how to direct a handful of domains through a mail relay but we want to direct every outbound email from all domains through our spam filter.
We also want to ensure that any regular updates to the mail node won't break or undo this config.
Plesk Automation :: Move Single Domain Email To Another Node?
May 14, 2015I have a full mail node and I have to move some domains on a different node without losing data . Is possible with PPA?
View 3 Replies View RelatedPlesk Automation :: Unable To Create Subscription On Windows Node
Apr 10, 2014 im getting an error when im trying to create a subscription on a windows node via PPA management node, the task error is:
Method name: registerIpPlesk on SCREFleskWebIIS:0
Last execution output: This IP address XXX.XXX.XXX.XXX is already registered in Panel on the network interface Local Area Connection
the IP XXX.XXX.XXX.XXX is the correct service node IIS ip address..
Plesk Automation :: Node Selection Based On Service Template
Aug 11, 2014We have a PPA environment with 7 service nodes (one management node, two web-, two database- and two e-mail servers). We also have 2 variants of hosting, a consumer and business variant.
We want separate the consumers from the business variants on the service nodes.
I want to use webserver1, databaseserver1 and emailserver1 for consumer hosting and webserver2, databaseserver2 and emailserver2 for business hosting
I want to make two service templates, one consumer and one business template.
Is it possible to configure ppa : When we subscript a consumer template, everything must provision only on the consumer service nodes automatically (web01, db01 and email01) and not on the business services nodes.
Plesk Automation :: Bug Report - Wget Missing When Installing A New (backup) Node
Apr 1, 2014I brought up a basic centos 6.5 install in desire to add it to my ppa cluster.
The ppa installation task failed because wget was missing on the new node. The error message made it easy to fix (yum install wget) but thought I'd report it so that your pre-req scripts can check and install it for future users.
Plesk 12.x / Linux :: Update Php Version?
Jan 10, 2015I've tried a few times to update php on my server from version 5.3 to the latest 5.5 however it keeps conflicting with apache2 that's installed and I ended up having to re-install everything as I accidentally deleted Plesk attempting to fix it.
Ideally I'd rather just run nginx with php-fpm without apache but it's not as straightforward anymore with plesk and how to go about updating PHP?
I've got a clean install of Parallels Plesk v12.0.18_build1200140606.15 running on Ubuntu 12.04.2 LTS.
Plesk Update From Beta To Normal Version
Dec 17, 2008how can I update plesk from 9.0 beta to 9.0 current version?
If I remove plesk, do my sites also be deleted?
Plesk 11.x / Linux :: How Internal Php Version Update Works
Nov 7, 2014i notice in the release notes for 11.0.9 update #63 that the 'internal php version is updated to 5.3.29'.i have been using php 5.4 for some time now (installed outside of plesk since php 5.4 it's over 3 yrs old now and php current versions are 5.7 now...).
IF i would install this update #63, is it going to DOWNgrade my php in use on the server for all of my sites? then i'll have to re-upgrade after installing #63. and if yes, when i install #64, #65, etc... do i have to do that from now on? how this automated update works under the covers so i can get the security updates without downgrading my php version in the future unintentionally.
Plesk Automation :: How To Update PPA To Show 5.4.x Rather Than 5.3.3
Dec 13, 20131) I've used yum to upgrade php on a linux from 5.3.3 to 5.4.21, how do i update PPA to show 5.4.x rather than 5.3.3 (ideally it should read the server on scheduled task to get version number)
2) On Windows VMs it installed PHP 4, PHP 5.2, 5.3, 5.4. How do i a) remove PHP 4 option.
3) How do I specify which should be the default PHP Version.
I am using PPA 11.5
Plesk 11.x / Windows :: Server Component Not Update Version Of ClamWin
Feb 4, 2014I update last version of antivirus ClamWin 0.98.1, but after refresh "Server Component" , I see that version of ClamWin is 0.98. Where are the problems on ClamWin or Plesk Panel?
View 1 Replies View RelatedPlesk Automation :: PPA - Linux Web Servers - Yum Update
Feb 18, 2014our our test setup. once we install a service node ie apache server, if i ssh to the server and type yum update i get the following:
Code:
[root@ppa-mysql1 ~]# yum update -y
Loaded plugins: dellsysid, fastestmirror, security
Loading mirror speeds from cached hostfile
* base: mirror.synergyworks.co.uk
* extras: mirror.sov.uk.goscomb.net
* updates: mirrors.coreix.net
Setting up Update Process
[code]....
this is the same on all PPA linux servers both web & mysql nodes.
Plesk Automation :: PPA - Cannot Get Access To PGSQL After Update
Feb 6, 2014I've managed to get so far through the update from 11.1 to 11.5
The updater was rerun after problems with corrupt data. Things seemed to be going well until it updated to PGSQL 9.1 and restarted
It appears to not to be able to get access
psql -h`hostname` -U plesk plesk
results in asking for a password, which it did not before and what the password would be for the plesk user.
Plesk Automation :: Email Alias Name Is Not Changed On Update
Jul 2, 2014We have noticed that if we have created example@domain.tld email account and we create new domain alias for example alias.tld. We have already created email accounts for example@domain.tld and example@alias.tld.
Now, if we change email account name for example example2@domain.tld only mailbox for example2@domain.tld is updated, example@alias.tl is unchanged.
In this case if someone send email to example2@alias.tld email will not be delivered because alias mail name was not updated. We have noticed this error in PPA 11.1 and PPA 11.5.
Your PHP MySQL Library Version 5.0.75 Differs From Your MySQL Server Version
Jun 27, 2009I have recently upgraded mysql server from 5.0.75 to 5.1.31 on my Ubuntu server 9.04 32 bit. After that when I am running phpmyadmin it is printing a warning :
Your PHP MySQL library version 5.0.75 differs from your MySQL server version 5.1.31.