No Email Received After DNS Changed
Apr 13, 2009
I have a detected server and it host one domain with many sub domains account. I never used the cpanel DNS service, instead I used the hosting company’s DNS. .Everything was working fine (including the email) until I decided to have my own DNS. I used the domain register company DNS service to create a DNS records for the domain and all my sub-domains. The problem is the email did not work yet!! Here what I done with the DNS :
eg.com my domain and 1.1.1.1 the server IP address (e.g.)
Type--- Name ---- Domain -- Data ---Pref
A---- ---- eg.com ---- 1.1.1.1
A---- *. ---- eg.com ---- 1.1.1.1
A---- forum. ---- eg.com ---- 1.1.1.1
A---- mail. ---- eg.com ---- 1.1.1.1
MX---- ---- eg.com ---- 1.1.1.1----0
MX---- *. ---- eg.com ---- 1.1.1.1----0
I update the nameserver in the cpanel basic setup. It should work fine, I don’t know what goes wrong? I never touch the server configuration, the server was relay on external DNS service.
Here are the error that I got when I tried to send an email to the server :
info@eg.com
SMTP error from remote mail server after RCPT TO::
host mail.eg.com [1.1.1.1]:
550-Verification failed for ....
View 2 Replies
ADVERTISEMENT
May 16, 2008
I have a problem where all email sent from uaccb.edu (studentmail.uaccb.edu [208.190.226.130]} is not arriving at my VPS. The people sending email from the above domain are not getting any errors, it is not being marked as spam, it is just being blackholed somehow.
I have checked the above IP and domain, and can't find it on any blacklist, and I am using pretty standard cPanel setup on my VPS. I have spam set to be marked and receive a fair amount and have it autorouted to a folder rather than auto-deleted.
From uaccb.edu, the only thing I have access to is Outlook Web Access to send test emails, and they are sent fine with no errors returned. If I send test emails to gmail and other similar email accounts, they go through fine, the only problem is to ANY domain hosted on my VPS. I have even recently transferred all the domains to a second VPS (with the same hosting company) at a different datacenter (for different reason) and the problem persists.
Is there any WHM setting or any ideas on how to troubleshoot this?
View 3 Replies
View Related
May 10, 2008
I got up today, went to check my emails and received invalid passwords on all my email accounts. I then went to check in the CPanels and get the same error when I try to login.
Then I try the root and same thing!
BUT all my linked FTP accounts work and the sites are online and working. One is giving a 500 error (cgi program) but besides that, they are all online w/ no changes.
My "host want to do a OS reinstall and let me try and restore my sites from a slave drive. I think thats stupid and shouldnt be needed.
They also automatically say I was hacked...Sure a hacker changed all the cpanel and email passwords but worked it so the linked FTP accounts would work and didnt take any sites offline.
View 4 Replies
View Related
Jul 2, 2014
We have noticed that if we have created example@domain.tld email account and we create new domain alias for example alias.tld. We have already created email accounts for example@domain.tld and example@alias.tld.
Now, if we change email account name for example example2@domain.tld only mailbox for example2@domain.tld is updated, example@alias.tl is unchanged.
In this case if someone send email to example2@alias.tld email will not be delivered because alias mail name was not updated. We have noticed this error in PPA 11.1 and PPA 11.5.
View 1 Replies
View Related
Jan 2, 2007
My server seems to be set up okay and almost everything works except for email.
Sending using Outlook or Telnet both appear to send okay and checking for email also appears to work okay. It is just that no emails are ever received (neither sending or receiving produce any errors on the email client).
In my logs I do see an error:
Jan 2 11:15:05 cobalt sendmail[29380]: l02AF5mA029380: localhost [127.0.0.1] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA
Jan 2 11:15:05 cobalt dovecot: pop3-login: Aborted login: rip=127.0.0.1, lip=12
View 4 Replies
View Related
Jun 15, 2009
A client is sometimes not receiving email (ie. they are informed by phone that one was sent a day or two earlier but they didn't receive it). When this happens the sender doesn't get any error message back. I had the server logs checked out for an email I sent the client that he didn't receive and the server did receive it. I logged on to the webmail and it wasn't there, but client says it's not in his inbox. I asked them to check all spam or other folders in his email software but to no avail. The problem can happen with emails that have attachments and those without. It's not happening for any particular sender either. My client cannot see any pattern to it.
View 3 Replies
View Related
May 12, 2009
I wanted to try HyperVM/LxAdmin setup from sometime now. I finally have one but I am getting trouble with its Qmail MTA. I am posting here hoping to get some help.
Let me tell you the issue.
I have my main vps IP: 10.10.10.22 (I have 3 additional ips).
I have setup 2 domains on their dedicated IPs. (10.10.10.23 & 10.10.10.24). However, whenever I send an email, I get outgoing IP to be 10.10.10.22. I searched on Google and found out that I need to patch qmail with outgoingip.patch to change the outgoing IP.
But how to patch my already installed qmail??? I tried but failed.
I am running Centos 5.3 with HyperVM/Lxadmin
Also, even if I host a domain on main IP, my SPF record is always
Quote:
Received-SPF: neutral (google.com: 10.10.10.22 is neither permitted nor denied by domain domain.com) client-ip=10.10.10.22;
View 4 Replies
View Related
Jun 12, 2007
I need help with email issue.
Sending and receiving from yahoo,google mail is just fine.
But when i try to receive email from another server or an localdomain on same server, i receive an email with the below content:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
support@xxx1.com
SMTP error from remote mail server after RCPT TO:<support@xxx1.com>:
host xxx1.com [xxx.xxx.31.49]: 550-Verification failed for <admin@xxx2.com>
550-No Such User Here
550 Sender verify failed
I am not sure it is the issue of sender or receiver?
View 6 Replies
View Related
Jul 21, 2007
I am using Cute FTP 7.0 Professional. The FTP server that I am trying to connect is firewall protected and hence I am using port method. But still I am facing problems in logging in. The following is the transcript of the command window:
*** CuteFTP 7.0 - build Jun 7 2005 ***
STATUS:> Getting listing ""...
STATUS:> Connecting to FTP server 216.185.43.181:21 (ip = 216.185.43.181)...
STATUS:> Socket connected. Waiting for welcome message...
220 Microsoft FTP Service
STATUS:> Connected. Authenticating...
COMMAND:> USER bizconsultancy
331 Password required for bizconsultancy.
COMMAND:> PASS *****
230 User bizconsultancy logged in.
STATUS:> Login successful.
COMMAND:> PWD
257 "/bizconsultancy" is current directory.
STATUS:> Home directory: /bizconsultancy
COMMAND:> FEAT
211-FEAT
SIZE
MDTM
211 END
STATUS:> This site supports features.
STATUS:> This site supports SIZE.
COMMAND:> REST 100
350 Restarting at 100.
STATUS:> This site can resume broken downloads.
COMMAND:> REST 0
350 Restarting at 0.
COMMAND:> PORT 192,168,0,14,7,111
200 PORT command successful.
COMMAND:> LIST
150 Opening ASCII mode data connection for /bin/ls.
ERROR:> Can't read from data socket. Socket error = #10054.
425 Can't open data connection.
ERROR:> Trashed response received.
View 3 Replies
View Related
Jul 5, 2007
Some of the e-mails I send are received several times by my recipients. I use Outlook Express. I send the e-mail only once but some people are complaining that they receive the same message as many as 10 times sometimes. Do you know what can be causing it?
View 1 Replies
View Related
Dec 15, 2014
I maintain a server with a few domains. The server runs Plesk and Mailman. There are about 50 mailing lists with number of subscribers ranging from a couple people to a few hundred people. All work fine.
There is an additional list with around 2500 subscribers. Messages sent to this list are being received with nearly 500 identical "Received-SPF: pass" lines. Besides seeming odd, it's particularly problematic as some domains are bouncing the emails because the header is too large.
This behavior started after I upgraded from Plesk 11.x to 12.x.
The SPF lines look like this:
Received-SPF: pass (SERVER-HOSTNAME-HERE: localhost is always allowed.) client-ip=127.0.0.1; envelope-from=BOUNCE-LIST-ADDRESS-HERE; helo=SERVER-HOSTNAME-HERE;
Where SERVER-HOSTNAME-HERE is our hostname and BOUNCE-LIST-ADDRESS-HERE is the list's bounce address.
For what it's worth the server hostname and the domain of the list do not match.
This issue seems to be tied to the number of subscribers. We made a new list with a few subscribers and messages looked fine. We added the 2500 subscribers to the new list and then we saw the plentiful Received-SPF: pass entries.
View 5 Replies
View Related
Feb 5, 2008
I'm in the process of moving some websites between hosts... from Dreamhost to a VPS.
Basically I want to make sure that no emails get lost in the transfer, as it's possible some people haven't collected their emails. I'm only talking about 5 or 6 sites here with about 15 mailboxes in total.
I have pop3 set up on the VPS with exim4 and courier using Maildir's. I have imap/pop3 access to emails on dreamhost and all my clients only use pop3.
Dreamhost doesn't provide direct access to the Maildir's of users, so I was planning on using offlineimap to save a copy of each mailbox and move it into the Maildir of the user on the VPS. I.e. move the contents of INBOX/new into user/Maildir/new etc. I'll do this once the dns settings have propogated so I can be sure to have every single email.
Does this sound reasonable? Is anything likely to break? Will any email clients break with any of these transferred emails? I tried it with a test account and it seemed OK, but I would like an experts opinion on whether or not this is the best way of achieving what I'm trying to do
View 3 Replies
View Related
Jul 27, 2008
[Sun Jul 27 15:06:12 2008] [error] [client ] % Total % Received % X
[Sun Jul 27 15:06:12 2008] [error] [client ] ferd Average Speed Time Time Time Current
[Sun Jul 27 15:06:12 2008] [error] [client ] Dload Upload Total Spent Left Speed
[Sun Jul 27 15:06:12 2008] [error] [client ]
0 0 0 0 0 0 0 0 --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- 0
Have you ever seen error like this?
View 4 Replies
View Related
Mar 21, 2015
i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".
Nginx error.log:
PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name
View 6 Replies
View Related
May 2, 2014
I am having a peculiar problem, when ever I attempt to access my server globally I get the dreaded 'No Data Received' error.
The machine is running Ubuntu 13.10 and is a dedicated server (I do not have GUI or physical access to the machine). All ports are open, iptables disabled, yet nothing works (running on port 80). I loaded the files onto a different computer at home and it works nicely, but not on the dedicated server.
Also, when the Apache server is off it says it can not connect in my browser, and when the server is on it says 'No Data Received' ...
View 4 Replies
View Related
Sep 19, 2008
I've had a few dedicated servers now with Liquidweb for over about two years.
Recently in the past few months I've begun getting these errors.
host.mydomain.com:2083 uses an invalid security certificate.
The certificate is not trusted because it is self signed.
(Error code: sec_error_untrusted_issuer)
* This could be a problem with the server's configuration, or it could be
someone trying to impersonate the server.
* If you have connected to this server successfully in the past, the error may
be temporary, and you can try again later.
Now I'm not sure what the issue is? What would have changed to have all the servers start giving me and my clients this error?
The error occurs when trying to login to WHM (for root), cPanel from root, cPanel for clients, FTP for clients, Mail for clients.
Thanks in advance for any insight.
I opened a ticket with Liquidweb once and they told me I need SSL Certificates for each server although I've never been explained why they all ran perfectly without the error for 2 years now.
View 2 Replies
View Related
Mar 8, 2009
i have a reseller and a client couldn't renew his domain name , so he bought a new domain name and he wants me to move his files (hosted on his old domain name) to his new domain name . how can i do that ?? (his old domain name is hosted on godaddy now)
View 8 Replies
View Related
Aug 7, 2008
I buy new server from softlayer and after movieng all files
I go to godaddy and change dns for my domain to
ns1.softlayer.com
ns2.softlayer.com
also I setup the dns from whm
ns1.softlayer.com
ns2.softlayer.com
now more than 48 hour and the domain still on old host
you can check it here
www.3walim.com
View 5 Replies
View Related
Jun 15, 2008
We already ran our servers for a few years and never experienced a problem like this.
Our domain registrar REQUIRE correct nameserver setup, even the number of nameservers, before they register a new domain but after the last cpanel update (manually to both stable and then release) nameserver 4 don't respond.
With starting bind I got the following/
eth1:1, xx.xxx.xx.83#53 Jun 15 08:29:50 mercury named[17599]: listening on IPv4 interface eth1:2, xx.xxx.xx.84#53 Jun 15 08:29:50 mercury named[17599]: listening on IPv4 interface eth1:3, xx.xxx.xx.85#53 Jun 15 08:29:50 mercury named[17599]: listening on IPv4 interface eth1:4, xx.xxx.xx.86#53 Jun 15 08:29:50 mercury named[17599]: command channel listening on 127.0.0.1
Dig from within the system gave the correct results but dig from outside give a timeout error on nameserver 4.
[url] also don't show any results while [url]works correctly. (RDNS is correct and IP address point to ns4.sa-servers.net)
View 0 Replies
View Related
Sep 28, 2007
I have a Problem with quota. All my account have an Unlimited Package and there quota is 0 MB.
I run following command:
Quote:
/scripts/initquotas
/scripts/resetquotas
/scripts/fixquotas
/scripts/upcp --force
when I ran /scripts/fixquotas and /scripts/resetquotas I saw following error (in SSH) :
Quote:
Resetting quota for zryco to 100 M
No filesystems with quota detected.
View 11 Replies
View Related
Mar 6, 2007
What RBL servers and list.domain.TLD is actually curently active?
I have the following in my RBL check, but i can't find the ip addresses for 3 of them. Have they changed there names or what?
zen.spamhaus.org Cannot resolve multihop.dsbl.org to an IP address.
bl.spamcop.net 216.127.43.94
dnsbl.sorbs.net 203.15.51.39 64.124.52.230 217.160.75.23
cbl.abuseat.org 216.168.28.50
multihop.dsbl.org Cannot resolve multihop.dsbl.org to an IP address.
qmail.bondedsender.org Cannot resolve query.bondedsender.org to an IP address
View 9 Replies
View Related
Apr 14, 2007
I had a TTL of 1800s for my domain but since I will be soon moving to a new host, I lowered the value to 45s (the minimum I can use).
Since I had a first TTL of 1800s, does that mean that the new TTL value will be updated globally within 30mins? or will it take a random amount of time (few hours or so)?
I just want to wait to have the new 45s TTL value propagated everywhere before modifying the main IP.
View 3 Replies
View Related
