I'm running Plesk 12.0.18 update 39 on Centos 6.6 with postfix and courier-IMAP
However I can't send emails from mobile devices or outlook - the security settings are invalid, I've tried all 4, SSL, SSL/TLS Accept all certs, Start TLS etc.
My Plesk Panel stopped to send notifications a while ago, I don't receive mails when the backup are done, the clients can't receive their passwords if they need to reset...
The mails are not being forwarded when they configure it in the panel (I receive a mail in mail1@mydomain.com and I want it forwarded automatically to mail2@gmail.com or wherever).
I don't see nothing about the plesk panel mail in the postfix log and I don't know what else to check.
Plesk 12.0.18 #27
CentOS 7.0.1406
I have followed the instructions here to send Plesk notifications through External SMTP (overuse, new domain creation, etc): URL....Here is the error I see in the panel.log: ERR [panel] Unable to send mail.
Is there another log that I'm missing with a more detailed error? Sending through an external SMTP works fine on sites hosted on the same server (Wordpress, Joomla).
Whenever trying to send an email using roundcube it just seems to fail... No error code is given - see attached image:
I've tried following the article here: [URL] ....
But it didn't seem to work and incidentally the main.inc.php file didn't even exist only a main.inc.php.rpmnew was there. I tried copying it to main.inc.php but it made no difference. Normal SMTP usage via thunderbird works, and everything works when trying to use horde.... it's just a problem with roundcube after the upgrade from 11.5 to 12.
Running on CentOS 64
Every out bound email message fails and stays in the queue. The mail log shows this error.
qmail: 1432283802.380653 delivery 27: deferral: Unable_to_read_control_files._(#4.3.0)/
A second problem, also qmail is that I can't send to the server using TLS on the submission port, only if I do plain text. But the first problem is bigger because we can't send at all.
This is a new plesk installation and it has never worked.
I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB,
I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time.
Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet.
I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change.
I know I'm probably doing something wrong, but I cannot get Android KitKat phones to authenticate via IMAP to my Plesk 12 server (straight out of the box). Not sure if it is an issue with standard dovecot config or Android, but the only way I can get them to connect is via pop3.
View 3 Replies View RelatedI'm using a basic PHP script on my website, but it will not send mail out. I know the script works, I use it on my other websites (which I do not host).
Now I have setup a Windows 2000 Server running IIS 5. What do I need installed (if anything) to be able to send mail from the sever?
I am sending mailing but I need send the emails more quickly. How can i configure this?
View 5 Replies View Relatedi have php forms and somes notifications from OSSEC and plesk server, but i can't receive these mail :
my configuration is plesk 12.0.18
Postfix
dovecot
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases, hash:/var/spool/postfix/plesk/aliases
command_directory = /usr/sbin
[Code].....
I installed exim and have been able to successfully use it as an smtp server. My test setup was as follows:
email client uses smtp.MYSERVER.com, my login, and password
The email is successfully forwarded to the appropriate recipient. However, when I create a new user, and test it's email capabilities, it does not work. I get a 535 error:
535 Incorrect authentication data
I have double checked the login and password, and I've tried this on multiple accounts. Is there an issue with how I'm creating the users? (useradd)
How i can increase rate of send/minute for my campaigns of mail?
View 5 Replies View Relatedi have apply the script patch to my server (ssl_v3_disable.sh) plesk 12.0.8 MU 19, CentOS 6.5.i have update the certificate as see the POODLE thread. when i try to send mail i got this message:There was an error sending your message: Could not open secure TLS connection to the server..this only append with horde (roundcube or external soft like thunderbird) work without problem.
View 11 Replies View RelatedI keep having certain domains being hijacked and mass emails being sent from them somehow. I've disabled mail within domain control panel for each domain and issue keeps occurring. I've limited # of emails as well to 2-5 per hour but now so many are trying to be sent from my server it is clogging up mail queue and I have to log into server via ssh and run postsuper -d ALL every day or two. It is very frustrating. The only way I can stop it is to disable domain in plesk panel but that is not an option.
What can I do to find the cause of this issue and stop it?
I have the problem that I can't connect to my mailserver tru the mail client (Webmail works fine, I receive mails and can send mails)
But if i try to connect over mailclient I get this error in errorlog:
couriertls: connect: error:1408A0C1:SSL routines:SSL3_GET_CLIENT_HELLO:no shared cipher
What can I do to get connection over mailclient?
I registered a domain name and setup a Linux server on GoDaddy, choosing Plesk panel with Power Pack. Inside the panel I created an email address, which I can access from the webmail interface without problems. I decided to setup my clients as well, using the IMAP configuration, as I'm using multiple devices.
I followed the instructions for Outlook express and I was able to setup the account on my virtual machine, with Windows 7 and Windows Live Mail.Though, speaking of the host machine, a MacBook Pro, I normally use Apple Mail that comes with MacOS. Instructions for setting up Mail are updated back to Snow Leopard at least and they do not work properly. I tried various configurations, but I was only able to receive mail on the account, while sending won't work at all.
I'd like Parallels to update the guide or, at least, to open a KB page with the solution(s) to this issue: I googled it and found out that it is a common issue.
In Plesk (V. 12.0.18) there is no possibility to create mail accounts for subdomains via web interface. The KB article [URL] ..... describes this problem. The article suggests two possible ways.
I don´t want to use option 1 (create subdomain as additional domain) because a subdomain as domain wastes a domain in the license model.
Instead of that I tried the second way (command line interface). I can execute the first command without problems. When I try to execute the second command, I get the following error: "An error occured during mailname creation: Unable to set password: Domain of type subdomain selected".
As the admin user, change the setting for a particular email account called "The maximum number of outgoing email messages" to a value beyond the default. For example if the default is 35, set it to 75. This is common -- often we have customers who send larger quantities of messages than the average user.
Login as a reseller with access to manage the email account and attempt to change any *other* value. For example, you could completely ignore the outgoing mail messages value and change just the Auto-Reply value
Plesk refuses to allow the change and kicks me back to the first tab with the following error:
The value must be in the range 0..35. Only the Plesk administrator can adjust this setting.Click to expand...
When trying to access the settings for mail on a domain I get the following error:
Error: Unable to find service node for ip address with id=6
I understand this is a problem with the database but I am not sure where to look to fix it.
I only have 4 IP addresses on the system.
how can set relay server on plesk 12 ? i need send mail by another server
mail server : mailenable
on linux/whm/cpanel add this to exim configirutation :
smarthost:
driver = manualroute
domains = !+local_domains
transport = remote_smtp
route_data = "relay.redstationmail.co.uk"
I am using SMTP for mail service. Is there any limit for maximum that mail can be sent for a month or day? If limit is der then how much i can send?
View 5 Replies View RelatedI have Plesk 12 with Centos 7.1. When I have to send emails with my IP gives error:
Subject 'Tews'
Server: 'smtp.xxxxxxxxx.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure (SSL): No
Socket Error: 10060
However any other IP I can send emails. How do I fix this?
Started after last update 12.0.18 Update #44 (on CloudLinux): I can send mail wia created mailboxes, but sites can not send mail, contact forms say "Failed to send your message." maillog file also do not indicate sending any messages from domains. Wordpress restore password claims:
"The e-mail could not be sent.
Possible reason: your host may have disabled the mail() function."
php.ini is default:
safe_mode = Off
disable_functions = is empty
The issue about not sending mail from domains was - old versions of LVE anf CageFS are incompatible with latest plesk update, updating them caused all sites in Cagefs to throw error 500 with log string: "SecureLVE jail error Invalid regexps: no match for path to base home directory". It was fixed by changing cagefs.base.home.dirs regexp to the real sites folder location. Enabling cagefs back removed one of the files it shouldn't:
"Removed file /var/cagefs/81/xxx/etc/php.d/soap.ini"
So be carefull to place necesssary files back.
For now everything works.
Click to expand...
Click for original message
i have one Mailbox on my server, which i cannot sending mails. I tested it with Outlook and Horde.
For Example, i see this error at the Maillog:
Code:
Jul 14 22:12:13 gaius postfix/cleanup[12194]: 2F653402A6: milter-reject: END-OF-MESSAGE from localhost[127.0.0.1]: 5.7.0 The message could not be sent. You are not allowed to use sendmail utility.; from=<user@server1.local> to=<user2@server.local> proto=ESMTP helo=<gaius.stefanshome.com>
I delete this Mailbox, but after a time, i have the same problem again. On the Plesk Webinterface there is no problem logging with the outgoing spam protection.
I just moved from DirectAdmin to Parallels Plesk and already love the interface. Much better than DA in my opinion.
Let's get to the problem:
When I make a new email account I can login to this account on webmail.domain.com (roundcube) and receive and send emails. Now when I want to use this account on Apple Mail i'm not sure which ports I need to use.
For the incoming mail server I use: 143
For the outgoing mail server I use: 587
Now when I look at my mailbox it gives me a warning sign. The outgoing mail server gives a green dot, but the incoming mail server gives me a red dot.
- So sending mails works.
- And receiving mails don't work.
I am using IMAP and have enabled the SSL box. I don't know if i need to check this, because i'm not running on an SSL certificate.
Are the ports that i'm using right? And should I enable the SSL checkbox?