I am using latest version of PP12 and do not have the "Send from domain IP addresses." seeing showing in the Mail Settings page.
There is nothing shown between "Enable message submission" and the "Relay Options".
Yes, I am using Postfix.
What am I missing?
If i select this option in Server-Wide Mail Settings, server still sends email trough main IP address.
View 2 Replies View RelatedI am trying to change the default php settings under domain (upload_max_filesize & post_max_size) but nothing happens. I am running PHP 5.5 in FastCGI. I also changed it to Centos default PHP (5.4.16) but nothing happens again. It only works when PHP runs as Apache module. The problem is on FastCGI Application.
My server: Centos 7, Plesk 12 Check the screenshot for installed components.
I'm using the migrate tool to clone our production server to a backup server.
I'm using the following command
Code:
cd /opt/psa/bin/
./migrate --migrate-server -host x.x.x.x -password mypwd
I've noticed that the per-domain PHP settings (like open_basedir and include_path) are not transmit to the backup server. Is that the expected behavior ? I would have prefer the migrate tool to include all settings....
I have a problem to send email to idn domain names.
The error that I have is
Validation failed for: xxx@xxx [pid 111655 on line 754 of "/usr/share/psa-horde/imp/lib/Compose.php"]
My environment: Parallels Plesk v12.0.18_build1200140606.15 os_Debian 7.0 64bits - postfix
In documentation about Server-wide-mail settings
In Plesk for Linux with the Postfix mail server, you can change the IP address used for sending mail. Also, if your server sends mail from domain IP addresses, you can specify which name will be used as a host name in SMTP greetings.
Choose from the three options:
◦Send from domain IP addresses. By default, mail from each domain is sent using the domain's IP address. The host name used in SMTP greeting is defined by the configuration of the mail server.
◦Send from domain IP addresses and use domain names in SMTP greeting. If selected, Plesk changes the mail server configuration so that the SMTP greeting will contain the name of the domain from which an email message is sent.
This option prevent the sender's IP address from being put into public black lists, such as the Spamhaus or OpenBL lists. This might happen if the mail server host name is used in SMTP greeting for the messages sent from domain IP addresses. Some recipient servers consider such messages as spam.
We recommend that you use this option if you host less than 100 domains. In case of a large number of domains, using this option significantly increases the load on the server.
◦Send from the specified IP address. You might want to use certain IPv4 and IPv6 addresses for all outgoing mail.
Sending all mail from the specified address might be useful, for example, if the IP address of the mail server was put into public black lists, such as the Spamhaus or OpenBL lists. If you select None, outgoing mail will not be sent.Click to expand...
When trying to access the settings for mail on a domain I get the following error:
Error: Unable to find service node for ip address with id=6
I understand this is a problem with the database but I am not sure where to look to fix it.
I only have 4 IP addresses on the system.
OSMicrosoft Windows Server 2008 R2 Service Pack 1
Panel version11.5.30 Update #47
We have a few hosting plans setup with different "allowances" for each.The website permissions allow basic html and PHP.In Windows Advanced: The website settings allow for html, php, asp and asp.net
When we change a Basic Hosting plan to Windows Advanced using "Change Plan", it will reassign the subscription/domain to use the new plan, but it will not add-on the extra features in Hosting Settings.
situation:
- compiled and installed php 5.5 and 5.6
- both versions work fine and are registered in plesk
- base configuration for php is set for each version in a custom.ini
issue:
- plesk php-settings are not applied: not matter what I change in Plesk php-settings, the values from my custom.ini file are used
What did I do wrong? How do I re-enable plesk php-settings?
Addendum: The php-settings apply esspecially to post_max_size and execution_time
so my website is working perfectly fine for a few months now, and im looking to use Roundcube instead of Google Apps.What are the DNS settings i need to change to for my domain registrar?Currently i have the following records, and it can only send email, and not receive.
A Records @ IP Address
A Records webmail IP Address
I cannot find the DNS Setting in Websites&Domain TheWebsite/Show More
I tried changing:
Tools&Settings
Plesk
Custom View setting (DNS template settings checked)
Also:
Tools&Settings
Plesk Appearance
Interface Management
-Power user View
(with & without) Use Custom View-Service Provider View
(with & without) Open hosting operations in Server Administration Panel
However when I go to
Websites&Domain TheWebsite/Show More, the DNS settings are still missing.
Is there any other setting I can try to show the dns settings?
Centos 6.6
Plesk 12.0.18 Update #30
Ubuntu 12.04
Upgraded Plesk from 11.5 to 12.0.18 from panel.
I have installed PHP 5.3.29 (make from sources)
All smooth, added handler:
Code:
/usr/local/psa/bin/php_handler --add -displayname 5.3.29 -path /usr/local/php5329/bin/php-cgi -phpini /usr/local/php5329/etc/php.ini -type fastcgi -id php5329
App work ok after change to new php with hosting settings(change php handler Fast Cgi)
But php info shows that: Loaded Configuration File is /etc/php5/cgi/php.ini
This is not good as I checked should be for certain vhost cutsom php ini which is generated by PHP settings.
For example I changed in Plesk memory_limit to 333MB applied changes panel show successully, but still there is 128MB default value in phpinfo().
Am I missing sth ? Is there additional task needed expect adding handler? Or is there a known bug?
ps. after change handler back to 5.3.10, (default installation) there also custom PHP settings file seems not to be processed.
I did not tested earlier maybe upgrade Plesk to v12 broked sth? What should I check?
I have tried to delete (and let psa recreate) php.ini from vhost/system/mydomain.com/ but also did not worked...
I want to know what settings to make in the Dns of my Server so always to show the www. in the browser, before the domain name.
For example, in the url to be www.mydomain.com and not mydomain.com
I manage 1 server with 5 domains. I use the panel as power user (unique user)
I want to assign a new IP to a domain. In the hosting setting there is no IP to choose and in the IP tab if I click on the IP there is no domains to choose becouse all the domains are assigned to the primary IP...
I'd like to set IP in the hosting setting of the domain...
I'm trying to view my sites using the "Quick Preview on a domain name in Plesk" setting. I notice that it modifies that domain's DNS records to include the IP with dashes, however when I attempt to preview any of the sites hosted, I get "server not found" from my browser. The URL is the correct syntax, but cannot seem to access the site.
I've tried turning DNS off and on for each hosted site, but this doesn't seem to make any difference.
where do I find the setting to change dns records in plesk 11.5 ver ? I do not see it, it is missing in settings of domain under tab: "Websites and Domain"
View 1 Replies View RelatedI want to change SOA Settings from defaults to these: When I press OK button shows that is saved but when I test with [URL] .... and [URL] .... shows that settings still is defaults.How to change these settings??
View 1 Replies View RelatedI recently reinstalled my Plesk Panel 12.0.18 after several failures, which I wasn't able to repair (not even bootstrapper.sh would work). All of my websites weren't accessible, the connection between websites and the Database server didn't work and the Plesk backend was unavailable, too. I used the autoinstaller via command line to make a new Plesk installation.
Now I have a clean panel, the websites are available again, the MySQL database works again, but I don't have all my settings and websites in the Plesk backend anymore.
My question is: How can I get the old settings/configurations, which are still on the server, back in to Plesk?
Some sites reach maximum children
so I need to change
pm.max_children = 5
for all new domains on a server
How can this be done?
I know i can change it manually on each new domain, is there some kind of template to modify?
What exact file to modify in order to optimize fastcgi settings, then to set default for all websites. Sample code below:
# execute all .php files via php-fpm
location ~ .php$ {
# connect to a unix domain-socket:
fastcgi_pass unix:/var/run/php5-fpm.sock;
fastcgi_index index.php;
[Code] ....
* Go to "Web Server Settings" add text to "Additional directives for HTTP" and press button "Ok".
* Go to "Document root" folder of your domain and now you have a new folder "/cgi-bin/test" with file "test.cgi":
Code:
#!/usr/bin/perl
print <<HTML;
Content-type: text/html
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
[Code] ....
I am attempting to add Office 365 to a domain on my server. To verify my DNS settings they require me to add the following records:
Lync Online
Type Service Protocol Port Weight Priority TTL Name Target
SRV _sip _tls 443 1 100 1 Hour @ sipdir.online.lync.com
SRV _sipfederationtls _tcp 5061 1 100 1 Hour @ sipfed.online.lync.com
With Plesk 12 I cannot set a weight of 1 and a priority of 100 in DNS. What is the solution to allow this to verify?
OS: Ubuntu 12.04.5 LTS
Plesk version: 12.0.18 Update #25
I am setting up a new server and started to migrate domains from an 11.x plesk server to this new server with plesk 12.x on it. Everything works fine, domains, users, mailboxes, everything is migrated - except the horde settings inside the webmail. I recognized this after my first login into webmail, normally the inbox is shown (I configured my webmaoil this way) but after the migration this setting is lost - including all other settings. How to migrate this settings?
View 1 Replies View Relatedis there a way to set global php values settings for all Domains in Plesk 12. In the older version of Plesk I can do it by linux in /etc/php.ini and restart the apache and all Domains will be load this configuration. But from Plesk 11 the settings are not loading from /etc/php.ini, only by the own php.ini file.How can I do it for all domains?
View 1 Replies View RelatedWe are running Plesk 12.0.18 with MySQL (Server Version: 5.5.33-MariaDB - openSUSE package) on OpenSuSE 13.1
MySQL is running in strict mode and its fine for the most of our customers. But some are trying to run Contenido, thats a CMS, which could work with this mode and we have to disable mysql strict mode.
So my question is: Is it possible to disable mysql strict mode just for choosen customers?
When creating a new subscription via the API (Plesk 12) is there a way to specify the Mail settings? More importantly is there a way to turn off Mail when setting up a new subscription? Each time I create a subscription via the API Plesk spits out the following error:
Code:
New configuration files for the Apache web server were not created due to the errors in configuration templates: Template processing failed: file = /usr/local/psa/admin/conf/templates/default/domainWebmail.php, error = Template_Exception: Empty content was provided for config file /etc/httpd/conf/plesk.conf.d/webmails/horde/demon3zxc.e-worksmedia.com_webmail.conf file: /usr/local/psa/admin/plib/Template/Writer/Webserver/Abstract.php line: 47 code: 0.
Here's an example of the request I'm sending:
Code:
<packet version="1.6.3.0">
<webspace>
<add>
<gen_setup>
<name>{{domain}}</name>
<ip_address>{{ip_address}}</ip_address>
[Code] .....
When adding a subscription with a certain plan, I get this error"Error: The plan was not applied: Custom changes in PHP settings" almost instantly after I initiated the creation of the new subscription. Another service plan doesn't have the issue, and though I tried finding the reason why one works while the other doesn't I simply wasn't able to. The service plan in question is used for over 40 others without a problem just when I select it for a new subscription, I get the mentioned error message.I am using Plesk 12 on Linux, all latest updates installed.
View 1 Replies View RelatedIs there a way to set the php-handle for all domais as "fastcgi".
At the moment when i create a domain, it will be run as "apache".
I like to change it to "fastcgi". I know there is way, to change it in the databases, but i forget where was it...
When I click /admin/server-protection/settings/ It takes me to the main page with a message saying
Code:
Error: Unable to encode IDN email address '': email address is invalid
Plesk 12.0.18 on a CentOS server.
PRODUCT, VERSION, OPERATING SYSTEM, ARCHITECTURE
11.5.30 Update #2, CentOS 6.4 (Final) x64
PROBLEM DESCRIPTION
Site isolation settings don’t have any effect.
STEPS TO REPRODUCE
Configure the following in site_isolation_settings.ini:
php = on
php_handler_type = fastcgi
Create a service plan without the permission for "Setup of potentially insecure web scripting options that override provider's policy". Create a customer with subscription and assign the service plan.
ACTUAL RESULT
The customer is able to switch between “CGI-Application”, FastCGI-Application and “Apache-Module”.
EXPECTED RESULT
Customer should not have the permissions to switch the "PHP support"...