Plesk 12.x / Linux :: Change SSL Cert Assigned To IP Address
May 4, 2015
I changed the default certificate (I added the certificate and marked as Default in Server->SSL Certificates).Also I assigned the SSL certificate to my domain.
This works fine, but now I'm trying to make the website PCI Compliant and their test shows that if you request the certificate from the ip address (instead of using the domain) it showns the Parallels self signed certificate instead os showing the default certificate i uploaded). I used also ssltools.websecurity.symantec.com tool and it shows the same. How to change the certificate shown for the one I bought?
View 1 Replies
ADVERTISEMENT
May 24, 2014
I had an SSL cert that is about to expire so I purchased a new one, installed it, uninstalled the soon to expire cert. Went into Tools and Settings > IP Addresses, and assigned the new certificate to the IP.
Although I deleted the old certificate, it still shows in a browser as well as when I test the domain at a SSL server testing website. The new certificate shows also in both browser and test website, but it is a secondary certificate after the soon-to-expire cert.
How do I get rid of the original certificate?
View 2 Replies
View Related
May 29, 2015
I've looked a good amount of time trying to change/find where its stored. I've looked in var/qmail and there is no alias folder..We're running postfix/dovecot ....
View 4 Replies
View Related
Sep 19, 2014
In Tools & Settings --> IP Adresses I got two IP Adresses:
192.168.1.10 (primary, bold)
89.104.83.139
Since the first IP adress is just the internal IP adress, I'd like to remove it, but I get the message that it's not allowed because it would be the primary IP.
Plesk has no option to just switch the primary IP adress, so what's the way to do it with plesk12?
View 1 Replies
View Related
Mar 16, 2008
Is it possible to use US IP Address assigned to my home server in Japan?
View 7 Replies
View Related
Feb 10, 2008
I need to change the IPs that are assigned to my name servers. In WHM they are set fine, ns1.xxx.com and ns2.xxx.com both have their own ip's.
However the nameservers were first setup with 123-reg as they hold the domain im using.
when i ping each nameserver they both endup pointing to 1 ip address (the ip of ns2.xxx.com) so i need to change this.
how i would go about getting this changed?
View 3 Replies
View Related
Sep 23, 2014
So after the palaver yesterday, I managed to remove everything to a degree enough to reinstall Plesk. I'm still having quite a few issues but at least the websites are up and running again.
One of the more important ones is SSL certificates. Apparently they still exist somewhere, but they're not showing up in Plesk.
I tried doing /usr/local/psa/bin/certificate -l -domain <domain>, however that returns:
PHP Notice: Undefined index: CSR; File: /usr/local/psa/admin/plib/api-common/cuCertificate.php, Line: 878
Error occured while sending feedback. HTTP code returned: 502
PHP Notice: Undefined index: Priv; File: /usr/local/psa/admin/plib/api-common/cuCertificate.php, Line: 878
[Code] .....
View 1 Replies
View Related
Jan 16, 2015
how/where can i change this ? DB, File ? Or impossible ?
Or have i create my own one and then to import it ?
View 4 Replies
View Related
Jun 9, 2015
I have a valid cert installed for a particular domain on my plesk server. I would like to take that cert info and export it to a valid PKCS12.
I was looking for the actual cert or pem files on the server but couldn't find them. Should i just copy all of the cert information to text files and create a pkcs12 via command line?
View 1 Replies
View Related
Dec 15, 2014
Currently i'm running a server with 12 customers on it. They all have their own domainnames and subscriptions. One of them wants to secure his site with SSL and also his mail traffic. Currently he is using the mail.hisdomain.com server for receiving/sending e-mail. I want to install a certificate so that domain is secured. How can i accomplish this?
When i look on the server there is only 1 PEM file for the whole server. If i'm going to install his KEY and CRT in that file than all my clients will use that certifcate right? Can i make it so that only his domain uses thoses certifcates? Plesk is configured to use Postfix with Courier.
View 1 Replies
View Related
Sep 10, 2009
I am running plesk 9.2. I need to move one domain from the shared IP to dedicated IP. How do I do that? My server vendor has already allocated the IP addresses to me and I can see the unused IPs in the Ip address pool. How can I change the ip of suppose; mydomain.com from 1.2.3.4(shared) to 4.5.6.7(dedicated)?
View 2 Replies
View Related
Feb 21, 2015
I have a client on a dedicated IP, today we needed to downgrade the web hosting plan. As the web hosting plan puts users on a default shared IP, this plan change also changed the dedicated IP to the shared one causing some propagation issues for a small period of time.
I have contacted WHMCS about this asking if they had a way of changing the clients plan but keeping the IP address intact as this could lead to some very undesirable outcomes. They explained that it is not their fault and to contact Parallels.
I know I can change the plan directly in Plesk however by initiating the plan change via WHMCS, everything is automated.
View 1 Replies
View Related
Mar 18, 2014
I'm having a problem where there are a few test websites that have been left over from deleted subscriptions, there doesn't seem to be any option under Services > Websites to delete them or reassign them to a subscription, and when I try to add a new subscription and specify one of the websites I can't create the subscription as it says that the website already exists, ideally I would just like to remove these websites
View 2 Replies
View Related
Aug 13, 2014
Is it possible to ban mail from a specific IP address using Plesk 12?
View 1 Replies
View Related
Jun 20, 2014
Since upgrading to 12.0.18 Update #5 i have picked up a strange problem when creating a new email account.
When I try setup and new email account on any domain, I get teh following error message.
Code:
Error: mailmng-outgoing failed: ERROR:outgoing:mails.domain_id may not be NULL
If i click OK, I get the following error message
The specified email address is already in use.
I have to click cancel to return to the email address list, which shows the new email address with NO mailbox.
I then have to open the email address and check the Mailbox option to activate it.
Now the email account is configured correctly.
View 5 Replies
View Related
Apr 21, 2015
On my plesk server, i have several emails account. These email addresses should receive only emails send by a specific server. But for now, they can receive any email, including spam.
So, i would like to block all emails that are not coming from the allowed server.
How can i do this in plesk ? As i am not a very good server admin, can you tell me exactly what i need to do in plesk?
View 3 Replies
View Related
Oct 16, 2014
Is there any way to forbid plesk panel to use one of the IP addresses?If I remove address from panel - it has removed physically from network interface. I want to keep this IP address on network interface, but not let plesk panel use this address in all config files (nginx. apache, ssl etc.)
I want to use standard ports (443 and 80) on this IP address with some custom program not related to plesk panel and web servers. But now Plesk binds all available IP addresses to it services by default.
View 1 Replies
View Related
Jun 18, 2015
I've a vps hosting with several domains as you can see
I have to install several SSL certificates and the provider indicates me I must use different IP address in each domain, but I don't know how to do that.
I have several IPs
But all the domains are associated with the first IP, and I can't disassociate one domain and associate it to other IP.
Only when I go to settings for the hosting, I can change the IP, but it's the IP of the hosting, not the IP for one domain.
View 1 Replies
View Related
May 19, 2014
I'm trying to use spamfilter to block mail from specific address, adding this e-mail to spamfilter in mail account settings, but it doesn't work. In logs I see:
spamc[13430]: skipped message, greater than max message size (256000 bytes).
View 8 Replies
View Related
Jan 18, 2015
I have some email problem
CentOS 6.6 (Final)
Plesk version12.0.18 Update #29, last updated at Dec 22, 2014 03:39 AM
When sent mail to all @nblobe.com I got smtp 550 rejected
See log below:
Jan 18 10:55:12 server2 postfix/smtpd[3498]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <jcree@nblobe.com>: Recipient address rejected: User unknown in virtual mailbox
table; from=<mail@server2.888.com> to=<jcree@nblobe.com> proto=ESMTP helo=<webmail.server2.888.com>
From webmail.nblobe.com I can send mail but they do not delivered, but I can receive mail...
View 2 Replies
View Related
Aug 25, 2014
When creating a domain alias in Plesk, I can activate Web, Mail and DNS. When I activate "Mail" I would think that I now can create a mail address with that domain (myaddress @ domainalias.com). But I can't. If I create a new one I only can choose between the "real" domains. Is this a bug or a feature?
View 2 Replies
View Related
Mar 26, 2015
The Plesk Health monitor is sending alerts to the wrong email by default. How can it be changed?hanged" notifications by "Health Monitor" are triggered by the default address that has been setup in My Profile > Profile & Preferences or is there a different way of changing this setting.
View 1 Replies
View Related
Jul 9, 2014
This is on Ubuntu 12.04 with Plesk 11.5.
I set this up for someone, and temporarily changed the email for the administrative account to my address.
I have since changed this back to the original email, but Plesk keeps sending the administrative emails to my account.
I've pretty much grepped through the entire server for my email in order to stop it sending me emails, but I can't for the life of me find out why it keeps sending these emails to me.
How do I make Plesk send these emails to the right email-account?
The server is using Qmail.
View 4 Replies
View Related
Jun 12, 2014
I currently run a fair size forum which is running IPB and the new version recommends mysql 5.6. Therefore I decided to go ahead and get this installed. In the process I managed to mess up all my sites completely like a moron and at one point couldnt access anything running modcgi. Now I have fixed almost all of it
Problem: Problem I have now is that I cannot access the plesk panel no matter what I try. Firstly I could not restart the service as it said that the database was missing, and therefore I have restored the PSA database from a backup. The service now restarts however looks slightly different to how I would usually see the restart:-
Stopping sw-engine-fpm: [ OK ]
Starting sw-engine-fpm: [ OK ]
However I cannot access the panel from the usual address. All I get is "Firefox can't establish a connection to the server at husky-owners.com:8443" . Im at a bit of a loss as to where to go from here.
View 4 Replies
View Related
Jun 12, 2015
I have installed a new SSL cert and tried to assign it to an IP address.
Plesk says "Information: The properties of the IP address .... were changed."
But it seems the SSL cert was not changed.
Running in mysql the following query
select d.name from domains d inner join hosting h on h.dom_id = d.id where h.certificate_id = <id of new cert>;
gives:
Empty set (0.00 sec)
I changed the cert for the IP where all my domains are so it should show the domains using that IP/cert. Running the query using the ID of the old cert lists all the domains on that IP/cert.
View 1 Replies
View Related
Jan 28, 2015
CentOS 6.6
Plesk 12.0.18
64-bit
At some point, not sure when, PHPMyAdmin's (as accessed through the admin panel by clicking on a customer, manage hosting, databases, etc) permissions have changed such that I cannot view, edit or add MySQL routines/procedures. This appears to have occurred system-wide, though I have not checked every database on the server.
Is there a fix to get the permissions set so that I can make these changes again?
View 3 Replies
View Related
Feb 9, 2015
Are that possible to change root password on plesk?
I have a man so work for me on my server and install double php version on my server and maybe it`s best and change password to root!
So no one have access to my root more.
View 5 Replies
View Related
Jul 9, 2014
how to change ports of Nginx from 80 to 8080 I would like install Varnish
View 2 Replies
View Related
Nov 8, 2014
I recently changed the main domain url from website.com to www.website.com, this resulted in 404-errors when i navigated to wordpress...
I found a solution on the internet and updated the records with phpmyadmin [URL] ....
When I click on Login at the the WordPress Installations I'm still being navigated to the old website url. It supprices me that there is no option to change it on Plesk level after wordpress is deployed.
How can i change or update the wordpress path once it is installed in Plesk?
I'm using CentOS 6.2, maybe there is a config file or an database for Plesk?
View 2 Replies
View Related
Jun 21, 2014
I dont find where or how can I change default mailbox size, traffic and disk space for each domain in Plesk 12 Web App Edition, I only have unlimited by default.
View 15 Replies
View Related
