Plesk 11.x / Linux :: Administrator-email Sent To Wrong Address
Jul 9, 2014
This is on Ubuntu 12.04 with Plesk 11.5.
I set this up for someone, and temporarily changed the email for the administrative account to my address.
I have since changed this back to the original email, but Plesk keeps sending the administrative emails to my account.
I've pretty much grepped through the entire server for my email in order to stop it sending me emails, but I can't for the life of me find out why it keeps sending these emails to me.
How do I make Plesk send these emails to the right email-account?
The Plesk Health monitor is sending alerts to the wrong email by default. How can it be changed?hanged" notifications by "Health Monitor" are triggered by the default address that has been setup in My Profile > Profile & Preferences or is there a different way of changing this setting.
Basically what I want to do is to change the "From: "email address for system user "Plesk Administrator" when sending the automated notification with subject "Parallels Panel Scheduler notification". Where would I do this?
when somebody send email to hisname@hisdomain.com I'm getting that email in my mailbox (administrator email in Plesk settings).There is no CC or BCC in email recipient.I've tried to turn off the auto-reply and I'm not getting any emails.
I've looked a good amount of time trying to change/find where its stored. I've looked in var/qmail and there is no alias folder..We're running postfix/dovecot ....
I have a customer that would like a list of their email addresses including all aliases and forwarders. Is there an option to export email addresses to CSV? I can't seem to find anything in the control panel and I dont want to copy and paste 300 addresses.
I have a plesk12 webhost linux. We are having an issue about horde webmail. Weird because one of the email user cannot open email coming from specific email address and this is the message:
Error Message: Error when communicating with the server and There has been no contact with the server for several minutes. The server may be temporarily unavailabe or network problems may be interrupting your session. You will not see any updates until the connection is restored.
Now upon checking to the error logs of httpd, I found the ff: [Tue Jul 14 16:53:09 2015] [warn] [client 202.X.X.X] mod_fcgid: stderr: PHP Fatal error: Class 'Math_BigInteger' not found in /usr/share/psa-pear/pear/php/Horde/Mapi.php on line 172, referer:http://webmail.domainsample.com/imp/dynamic.php?page=mailbox
Almost all mail adresses on my server is getting a spam mail from same mail marketing company everyday and i want to block them... Normally i just add the mail address to blacklist from "Spam Filter Settings" but this company is opening new addresses everyday and it is impossible to add all of them to blacklist so i need adding it as a regex to the blacklist...
The company i am talking about is opening mail addresses every day like below...
As you can see all mail addresses begin with "nrt"+"6 digits of day"+"free mail provider", so right now i am using the regex below and it is already added to the blacklist but they are still able to send me... What can i do now?
When I change an email address on a user's account I get this error?
Code:
Internal error: mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/mydomain.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
Message mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/bullochrec.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory File Agent.php Line 243 Type PleskUtilException
I recently set up an eas and autodiscover sub-domains on my main domain (eg myserver.com) running Plesk, Webmail etc, and is the default website for the ip.
So it should be..
myserver.com (not SNI default for IP) eas.myserver.com (SNI) autodiscover.myserver.com (SNI)
But I notice the actual default site (non SNI) is the sub-domain autodiscover.myserver.com.
I checked in
Plesk -> Tools & Settings -> IP Addresses
and that was set correctly, so I tried to change it and back again, then...
/opt/psa/admin/bin/httpdmng --reconfigure-all
Neither worked.
I'm running Ubuntu 12.04.5 LTS and Plesk 11.5.30 #48 (the latest MU)
I had a old virtual Server with Ubuntu+Plesk12. I build a new dedicated Server with CentOS6+Plesk12 and migrate all Domains. Now i have a strange problem:
When i upload a file with FTP-User "user1", the file has the permissions Group=psacln & Owner=user1. All is fine, i can see and edit this file in a FTP-Program. But when my website create a file (cache html files or installed plugin folders in wordpress), I can't see, can't edit and can't download this files.
When i login to plesk with the admin account, i can see and edit this files. They have also Group=psacln & Owner=user1 and i can give them 0666 rights but when i login with FTP-User "user1" with my FTP-Program, I didn't see that files?!
I'm new to Plesk - I've inherited a web site for a local social club so have just been handed login and password. I believe I have version 11.0.9 and as I can see mention of an Apache webserver I'm guessing its linux.
So - I want to redesign and use Joomla so I can share the content updating with others.
I can't install Joomla as I have PHP 5.1 and need 5.3. I have no 'server' or any sort of option I can find (and I've looked everywhere!) to find a command line or somewhere I can run things.
When I try to allow SSH access the option says Forbidden and there is no option to change it.
I have a problem where every folder I ftp onto the server gets given a 700 permission and every file gets a Zero permission. Most of the sites I am adding to this server will be WordPress sites and most of the folders I want to have a permission of 755 and for the files a permission of 644 so my question is how do I change the settings so that any new files ftp'd onto the server get the permission 755 and files get the permission of 644 ?
I'm running Plesk 12.0.18 on Centos 7, recently I've got emails from backup service stating that it could not complete the backup due to insufficient space available on disk. Normally I have plenty of disk space available so I check the disk using the command
df -h
Filesystem Size Used Avail Use% Mounted on /dev/root 20G 2.3G 17G 13% / /dev/md2 91G 82G 4.4G 95% /var
it seems that /var has been growing up a lot, but if I run the command du -sh /var I get a total size of 5.7G (not 82G as stated before)
is Plesk calculating the wrong size or it's me using the wrong commands?
the hostname is www.domain.com also in the serversettings of plesk. When we go to http://www.domain.com:8443 we become redirected to https://www:8443. The only way to connect to plesk is to use https the redirect from http doesnt work.
i'm running the latest version of Plesk 11 on a Ubuntu 12.04 system.
We have a customer with a domain and this customer added other domains to his account.
now, 2 domains are not working, he created the as usual, Plesk created the directories under /vhosts/domain.com/domain1.com and the vhosts.conf are also correct.
when i'm opening the domain in the browser, i get the following error message:
The requested URL /var/www/vhosts/domain.com/index.php was not found on this server.
I have a problem with webmail (horde). Horde Webmail show the wrong time, 2 hours to late. It look like that horde show the UTC time, but not the CEST "Europe/Berlin" of my server. I can change that over "preferences" -> "global preferences" -> "locale and time" and change "Your current time zone" from "Default" to "Europe/Berlin". This will now show the correct time (timezone), but this is not the solution because this will do all webmail users.
How can i change the default timezone in Horde?
Output from shell
#my timezone and this will show in all things but not in webmail horde [root@www /]# date Fr 11. Jul 17:32:14 CEST 2014
#this time look like the default time in horde [root@www /]# date -u Fr 11. Jul 15:33:31 UTC 2014
Seems this started when upgrading to a version of 12. It was working a few days ago and only seems to affect mailing lists. I found a google Cached thread here where Igor was assisting some folks as late as Aug 4 and referenced this was "reported to development (PPP-10678 for your reference)" it seems the forums on Parallels changed or something because several Google links are not working and resulting in having to used cached results for the two links below.
I am able to disable SPF and the e-mails go through just fine however this was working with SPF enabled before a recent upgrade.
Page 1 [URL] ....
Page 2 [URL] ....
This is the error message displayed in /var/log/maillog Sep 24 01:38:35 controlpanel postfix/smtpd[3725]: connect from localhost[127.0.0.1] Sep 24 01:38:35 controlpanel postfix/smtpd[3725]: D565017C013E: client=localhost[127.0.0.1] Sep 24 01:38:35 controlpanel greylisting filter[3899]: Starting greylisting filter...
I seem to have a strange problem (I am hoping that if I fix this, it will fix another problem I am having).
For some reason (I most probably did by accident) when I run the command lsof -i tcp:80. The information that comes up says that my IP address xx.xxx.xxx.172 is being used to listen to port 80. Yet the IP address that was asignned to me is xx.xxx.xxx.171. I am wondering how I would go about removing wrong IP address so that the right one is listening to the correct port.
apparently Envelope-From, Sender and Errors-To headers are set to a wrong address for messages from mailman to the list-owner. This is particularly true for mails like 'message requires approval'.
It seems like the plesk<->mailman magic results in all list-domains being written to the end of /var/lib/mailman/Mailman/mm_cfg.py in the following format: add_virtualhost('list.DOMAIN').This in return results in mail headers Envelope-From, Sender and Errors-To of mailman system mails like described above being set to mailman-bounces@DOMAIN, where DOMAIN is the one from the last add_virtualhost entry.
In my opinion, this obviously is a bug. Maintainance mails from mailinglists have wrong headers set, often with a domain that belongs to a completely different customer than the mailinglist.
I found the following discussion on mailman-users mailinglist from 2008 which discusses the same issue - also a plesk setup: URL....
We're trying to migrate a Webspace from a 11.5 to a 12.0.18 Plesk host using the Migration Manager. The Webspace contains 4 domains. The main domain of the webspace gets migrated fine, however, all of the "child" domains fail with the following error:
Stderr is Wrong syntax for command's '-webspace-name' parameter. 'webspace-domain.ch' does not match the pattern '/^[[:alnum:]]([[:alnum:]-]{0,61}[[:alnum:]]){0,1}(.[[:alnum:]]([[:alnum:]-]{0,61}[[:alnum:]]){0,1})+$/iu'.
