The Plesk Health monitor is sending alerts to the wrong email by default. How can it be changed?hanged" notifications by "Health Monitor" are triggered by the default address that has been setup in My Profile > Profile & Preferences or is there a different way of changing this setting.
View 1 Replies
Basically what I want to do is to change the "From: "email address for system user "Plesk Administrator" when sending the automated notification with subject "Parallels Panel Scheduler notification". Where would I do this?
Plesk version is 11.5
This is on Ubuntu 12.04 with Plesk 11.5.
I set this up for someone, and temporarily changed the email for the administrative account to my address.
I have since changed this back to the original email, but Plesk keeps sending the administrative emails to my account.
I've pretty much grepped through the entire server for my email in order to stop it sending me emails, but I can't for the life of me find out why it keeps sending these emails to me.
How do I make Plesk send these emails to the right email-account?
The server is using Qmail.
When I change an email address on a user's account I get this error?
Code:
Internal error: mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/mydomain.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
Message mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/bullochrec.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
File Agent.php
Line 243
Type PleskUtilException
Using Cloudlinux 6.6 and Plesk 12
when somebody send email to hisname@hisdomain.com I'm getting that email in my mailbox (administrator email in Plesk settings).There is no CC or BCC in email recipient.I've tried to turn off the auto-reply and I'm not getting any emails.
View 10 Replies View RelatedSince upgrading to 12.0.18 Update #5 i have picked up a strange problem when creating a new email account.
When I try setup and new email account on any domain, I get teh following error message.
Code:
Error: mailmng-outgoing failed: ERROR:outgoing:mails.domain_id may not be NULL
If i click OK, I get the following error message
The specified email address is already in use.
I have to click cancel to return to the email address list, which shows the new email address with NO mailbox.
I then have to open the email address and check the Mailbox option to activate it.
Now the email account is configured correctly.
I've looked a good amount of time trying to change/find where its stored. I've looked in var/qmail and there is no alias folder..We're running postfix/dovecot ....
View 4 Replies View RelatedI have some email problem
CentOS 6.6 (Final)
Plesk version12.0.18 Update #29, last updated at Dec 22, 2014 03:39 AM
When sent mail to all @nblobe.com I got smtp 550 rejected
See log below:
Jan 18 10:55:12 server2 postfix/smtpd[3498]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <jcree@nblobe.com>: Recipient address rejected: User unknown in virtual mailbox
table; from=<mail@server2.888.com> to=<jcree@nblobe.com> proto=ESMTP helo=<webmail.server2.888.com>
From webmail.nblobe.com I can send mail but they do not delivered, but I can receive mail...
I have a customer that would like a list of their email addresses including all aliases and forwarders. Is there an option to export email addresses to CSV? I can't seem to find anything in the control panel and I dont want to copy and paste 300 addresses.
View 8 Replies View RelatedI have a plesk12 webhost linux. We are having an issue about horde webmail. Weird because one of the email user cannot open email coming from specific email address and this is the message:
Error Message: Error when communicating with the server and There has been no contact with the server for several minutes. The server may be temporarily unavailabe or network problems may be interrupting your session. You will not see any updates until the connection is restored.
Now upon checking to the error logs of httpd, I found the ff:
[Tue Jul 14 16:53:09 2015] [warn] [client 202.X.X.X] mod_fcgid: stderr: PHP Fatal error: Class 'Math_BigInteger' not found in /usr/share/psa-pear/pear/php/Horde/Mapi.php on line 172, referer:http://webmail.domainsample.com/imp/dynamic.php?page=mailbox
Almost all mail adresses on my server is getting a spam mail from same mail marketing company everyday and i want to block them... Normally i just add the mail address to blacklist from "Spam Filter Settings" but this company is opening new addresses everyday and it is impossible to add all of them to blacklist so i need adding it as a regex to the blacklist...
The company i am talking about is opening mail addresses every day like below...
nrt150401@hotmail.com
nrt150402@gmail.com
nrt150403@yandex.com
nrt150404@mynet.com
As you can see all mail addresses begin with "nrt"+"6 digits of day"+"free mail provider", so right now i am using the regex below and it is already added to the blacklist but they are still able to send me... What can i do now?
Under plesk 12.0.18, I would like to create thousand email address with redirect and send copy to. Its a long work to do.
Is there a solution to create all these email via an import csv, xls or else ?
today i changed the password for the admin panel for a customer (username eg. mylogin). 10 minutes later he called me and said that he cannot get into his emailaccount anymore. Checked the password and saw that the emailpassword for his emailaddress (eg. mylogin@mydomain.com) is now the same from the admin panel login. So i changed the emailpassword and checked the admin panel login - it now has the emailpassword. What a mess.. I'm running Plesk Panel 11.5.30 MU47.
View 1 Replies View RelatedI changed the Administrator view to Power User. How to change back?
View 5 Replies View RelatedI want to redirect a website to a particular URL so that the address bar shows the same URL and not the destination URL. I know it is possible via URL masking, however, I want it in such a way that whenever somebody clicks on any link in the website, the address bar should still show the original URL. To put it in simple words, Suppose I want to redirect [url] to [url]. Now if there is a link named contact/index.htm and somebody clicks on it the address bar should display [url]and not redirect to [url]
How can it be possible using URL Rewrite method in .htaccess file?
My System:
Ubuntu 12.04
Plesk 12.0.18 Update #18
Only Webserver no mail
What I want:
I have an old sha1 certificate and I would change this for the whole server.
What I have done so far:
I have already uploaded the new sha256 certificate with a new private key to plesk (I can not simply replace the old one, plesk does not allow me to upload a new private key).
Then I set the new certificate as standard certificate and pressed the "secure pannel" button.
After that the panel uses the new certificate.
Then I set in "Tools & Settings -> IP Addresses" on both IP addresses the new certificate.
Reboot
But now the "Tools & Settings -> SSL Certificates" shows me that the old certificate is still used 2 times somewhere. But the Interface does not show where it is used. How can I find out where this certificate is used? I want to remove the old certificate from the server.
I've got a problem with trying to add email accounts in Plesk.
My software is:
Windows 2008 R2 64Bit
Plesk 11.5.3
Mail Enable Standard / Free 7.53
I've added a subscription and the domain name.
When I click the Mail tab under the domain, I go to click "Create Email Address".
Plesk just sits there and doesn't load the next page.
I've tried looking for error logs, in Windows event viewer under Plesk it's blank.
The SMTP connector has only 1 outbound email in the queue.
I've tired running the Plesk fix permissions and verify database on Mail without resolving this issue.
I am currently on a VPS plan. My usage has become so much I need to switch to a different plan out of a different state. So with the new plan I will have a new IP address. What do I have to do to make the switch?
View 1 Replies View RelatedI have following problem when I try to cange the configuration file for Nginx in Plesk.
Details:
- Using Wordpress
- vServer
- PHP is handled through Nginx
- Memcached is enabled
To use the caching plugin "Cachify" in combination with memcached, the nginx configuration file must be edited. Following config should be used:
Code:
## GZIP
gzip_static on;
## CHARSET
charset utf-8;
## INDEX LOCATION
location / {
error_page 405 = @nocache;
[Code] ....
When I try to save the new config, following error appears:
Invalid nginx configuration: nginx: [emerg] duplicate location "/" in /var/www/vhosts/systemmydomain/conf/vhost_nginx.conf:8 nginx: configuration file /etc/nginx/nginx.conf test failed
How can I use the necessary configuration? I used google before, but some people said, that the server templated needs to be edited?
When changing the subscriber of migrated (or new subscriptions) from a normal customer to another normal customer or reseller customer I sometimes get the following message:
Code:
Reassigning Selected Subscriptions
ERROR: PleskFatalException
Picker not supported
When going back to the subscription overview I get the following error message:
Code:
Error: External exception. SQLSTATE[21000]: Cardinality violation: 1241 Operand should contain 1 column(s)
There are related forum entries:
Does not apply, vendor_id is never null: [URL] ....
Does not apply, it was a Plesk 11 > 11 migration: [URL] ....
I am having a Plesk server and when I scanned it with tools like OpenVas, It detected the following vulnerabilities with CVE acronym. As the corresponding ports and services are being controlled by Plesk, I require to patch it.URL....As you can see this vulnerability has been hit on port 106. I checked the Plesk server and found the port 106 being used by service "poppassd". This was nothing I installed and came along with the Plesk installation. Hence just wanted to make sure whether it has a patch from Parallels. As per my investigation this service is used for changing mailbox passwords and I am currently using Roundcube client. How to patch this vulnerability.
As per the solution in pic, the vulnerability "SMTP antivirus scanner DoS" can be resolved by upgrading or installing anti virus for Plesk mail server. I am ready to buy Dr.Web or Kaspersky from Parallels. But wanted to make sure whether any of the above antivirus can resolve the vulnerability.
cat /usr/local/psa/version
11.0.9 CentOS 6 110120608.16
when I create new email address get this error:
Error: Source: Microsoft OLE DB Provider for SQL Server
Description: 'encrypt' is not a recognized built-in function name.
My Plesk Panel version 11.0.9 on Microsoft Windows Server 2008 R2 Service Pack 1 with mail Server : IceWarp Server 10.2.2
And my subscriptions had 2 domains : matbaocare.com (main domain) & matbaocare.net (second domain).
When I create E-mail Address , by default I can choose several domain on my account with @matbaocare.com or @matbaocare.net.
But I don't want to create E-mail with second domain, just main domain can use email !
How to config Plesk to auto disable create E-mail with several domain on account?
I've upgraded from WS2008R2 & IIS to CentOS and Plesk 12.Now, I wanted to change the webmail link for all domains to mail.domain instead of webmail.domain. I've followd 2 guides to do that: URLs....Everything went smooth, but now Horde and Roundcube look like this (even when I restarted the whole server):
View 12 Replies View Relatedwhere i can change the default plesk page when a domain has been suspended or disable? I like to change it to my custom page. Is there a way?
View 5 Replies View RelatedI have a Plesk 12 server running that works great. But the problem is that whenever one of my shared hosting customers changes something out a domain or subdomain, all the other sites on the server give a 502 error.
The reason why is clear to me: apache is reloading its config while nginx is still active, but sees apache as being down and therefor throws a 502 error.
Is there any way to prevent this from happening? Because it's happening a lot and people are sending in 'site down' reports while there's actually nothing wrong with the server or their site.
We use our own backoffice for remote logins. Passwords for panel login are encrypted. Is it possible to remove the option for customers to change their password for panel login so they will stay in sync with our own backoffice?
If it's not possible, is there a way to decrypt the panel login passwords, like there is for the admin-password (/usr/local/psa/bin/admin --show-password)?
I have installed Plesk 12.0.18 on my server and want to change the hosting-type from "Forwarding" to "Web hosting". I change the type via "Websites & Domains" view (see attachments).
After I insert username and password, I get following error message:
Some fields are empty or contain an improper value. ('home' = '')
Deleting the domain and creating it from scratch is a bad option. I would have to create all e-mail accounts and migrate the data.
I have been trying to change an IP address on a customers Linux(RH9) server and I am getting errors, Can some on point/push me in the correct direction.
I am editing /etc/sysconfig/network-scripts/ifcfg-eth0 and am getting this message,
"1. Quit editing this file, because another edit session is active on this file.Continuing to edit will result in two versions of the same file. The one that is written last will overwrite the other one, resulting in loss of changes. The text "ifcfg-eth0" indicates that the process
editing this file runs on the same computer. When working over a network you will not see this message, because the process will be running on another computer.
2. Recover a previously crashed edit session."
This is a stand alone server and noone else uses this server.
I have tried to use the vim rercover command but no luck.
I am more use to using pico than vi, but pico is not installed.
The IP addresses assigned to our servers have changed so it's time to update the default SPF information contained in the DNS records for ALL of the domains hosted on our servers:
OLD
Code:
v=spf1 +ip4:173.236.23.185 +ip4:173.236.23.188/30 +a +mx -all
NEW
Code:
v=spf1 +ip4:69.160.255.188/30 +ip4:69.160.255.192 +a +mx -all
However, when we update the resource record in the DNS template and then "Apply the changes to all zones...",
Panel will apply changes from the template to all DNS zones including the customized ones. Note that user-modified records always remain intact. For example, if the template contains a new record that was already added by a customer, Panel will keep the customer's record.Click to expand...
