Plesk 11.x / Windows :: Set Default Component Failed
Oct 29, 2014
i upgraded plesk few days ago to the latest version to be able to use it on my tablet.when i done so My mail enable webmail is not functioning anymore, it opens the default plesk website.i have mail enable enterprise version 6.6 licensed.i tried to rebuild i tried everything till now i tried to go to server components and try to disable the webmail and re enable it and see. so it disabled fine, when i tried to enable it gave this error: Error: Set default component failed: defpackagemng failed: Execute websrvmng --add-webmail-site --webmail=mewebmail failed with error code 1: Cannot find hosting by domain ID 47
how to get my webmail back up. an update, i have tried enabling horde first, then i tried accessing the webmail it worked with horde, then i went back to server components, when i tried enabling mailenable webmail now it didnt give the error and worked. (ONLY when horde is enabled with it) then i went back to mail settings tried to use mail enable instead of horde, now it gives service is unavailable! a complete new error. i went to iis i found that MailEnableAppPool status: stopped, i tried enabling then restart iis, once restart it gets back to disabled,
View 1 Replies
ADVERTISEMENT
Feb 4, 2014
I update last version of antivirus ClamWin 0.98.1, but after refresh "Server Component" , I see that version of ClamWin is 0.98. Where are the problems on ClamWin or Plesk Panel?
View 1 Replies
View Related
Jan 6, 2007
In the Plesk updater there is an option for "Ruby on Rails support" does anyone know if this is actually installs Ruby onto my server?
View 0 Replies
View Related
Jun 27, 2015
How to run PHP in the default location?
When you open the pages of the local IP address 192.168.0.14 opens inetpubvhostsdefaulthtdocs
but only works html (index.html)
How to open a php (index.php)?
View 2 Replies
View Related
Jan 14, 2015
"What anti-virus do you use on your postfix email server powered by Plesk?".Is there an anti-virus program that can be installed on Plesk version 12.0.18 as an extension or component? I need it primarily for protection of incoming email from malware.I've seen in Add or Remove Components in the Mail hosting features that I have installed Kaspersky antivirus, but I didn't seen anywhere that it actually can be configured from within Plesk. It also, as far as I can see, doesn't do anything. what is Kaspersky antivirus used for in Plesk and how can I configure it?
View 2 Replies
View Related
Mar 31, 2014
I've installed the Plesk Panel onto a windows 2008 server. It's all good, web sites are flowing and I'm really happy with the software. The issue I'm having is a customer has an asp site with an access database. After I uploaded their site, they couldn't write to the database, so I had to manually go and set the permission on the database for the "Plesk IIS Anonymous Account (IUSR_xxx)" user to have modify access on the file.
So my question is this, how can I set up the default hosting account to already allow this and so I don't have to go an waste time tweaking the folders manually trying to find the right permissions?
Also, why is it the Plesk IIS Anonymous account that needed to have it's permissions tweaked and not the "Default Plesk application pool user (IWAM_plesk(default))" which is the user who's configured on the application pool in IIS? I can't see where the Plesk IIS Anon user is being used.
View 1 Replies
View Related
Oct 15, 2013
I am installing plesk go to dns template for edit, when need remove defualt ns record recive this error :
Error: Unable to remove the NS record from the DNS template: Each DNS zone must have at least one NS record.
I am already add 2 ns record !!
View 2 Replies
View Related
Dec 30, 2014
Is it possible in migration manager set a non default RDP port?
View 1 Replies
View Related
Aug 15, 2013
Plesk 11.5 (Windows Server 2008 R2)
I changed the dump location, but how do I change the default backup location on the destination server from:
C:Program Files (x86)ParallelsPleskPMM mp
To:
D: emp
Also, how do I change it on the source server as well? I have tons of space on the D drive, but only 200GB on the C drive.
View 6 Replies
View Related
Jul 22, 2014
Seems that the default installation of Bind on Windows plesk 11.x (i don't know if is also for Linux), configure bind by default as open resolver. Then we must fix the problem using this kb:
[URL]
I'm wondering if i'm doing a wrong installation, of this type of installation is by default. In the second case, is there any reason?
View 2 Replies
View Related
Feb 24, 2015
Plesk12 on IIS8.5/Windows2012r2.
Migrating existing IIS websites into Plesk we are creating new clean websites and then copying the existing code across into the httpdocs directory.
Should we leave all the documents and file structures created by Plesk in place when we do this OR should we delete everything in the httpdocs directory and copy our code into here?
View 1 Replies
View Related
Dec 26, 2013
My one website & all it's sub-domains automatically showing Plesk Default Page . After checking further, I found websites were stopped on the server . I manually started them but after few hours again same status . I repeated the same thing several times but issue not fixed.
View 9 Replies
View Related
Jul 3, 2012
Is there a way to create global default nameservers for our clients to use in Plesk 11? A lot of clients rather not create their own nameservers, and would simply like to use ours. I can't find any settings in the Plesk Administration where you would create your nameservers as you would in other panels like cPanel/WHM.
View 3 Replies
View Related
Oct 9, 2013
We have set up a site for a customer anyone goes to view the sites an a default authentication pop up appears, and the only way to view the website is to type in the customers Cpanel Login details.
I've checked the IUSR, IWPD permissions and they are correct. and check the authentication modules and level in IIS and they seems to be correct.
Is there away to set a customers permissions to the default settings?
View 1 Replies
View Related
Jan 23, 2014
I have a Windows VPS with Plesk panel. Windows Server 2008 R2 with plesk panel version 11.5.30.
I tried to change the default plesk panel port (8443) to eg (1234) without any success.
The steps i followed are the following:
1) Firewall -> Inbound rule -> allow for port 1234
2) Firewall, Disable inbound rule for port 8443
3) IIS, PleskControlPanel, Bindings: changed binding from 8443 to 1234.
Now i type on browser: [URL] .... and while its loading after some seconds redirects me to [URL] ...
View 6 Replies
View Related
Sep 2, 2014
Code:
Error: Unable to reconfigure web server. websrvmng failed: Site MailEnable WebMail does not exist at IIS7WebSites::get() In IIS7NativeProvider module Exception type: System.Exception at IIS7WebSites.get(IIS7WebSites* , auto_ptr* , Int64 id, basic_string,std::allocator >* idnName)
Windows Server 2012
Plesk 11.0.9 Update #62
Note: Recently migrated from Plesk 9.2
Trying to set Default Site for a Dedicated IP Address.
I go to Subscription, then to domain > Change Hosting Settings, select dedicated IP address and OK, works fine. Site goes to Default Plesk Page.
Go to Tools & Settings, IP Addresses > Select the dedicated IP address I set above. Change Default Site to site above. Click Ok.
I get the error message above and nothing changes.
I looked on my IIS Server and MailEnable's Webmail is installed under the Default Website.
I have another Dedicated IP on this server and it has a default site on it working properly, but it was set up on the old site and it was configured as part of the Migration using Migration Manager.
I tried deleting the IP address and adding it back in. That didn't change anything. I also tried running: "%plesk_bin%websrvmng.exe" –reconfigure-webmail since that came up under someone else's issue when searching the web and that .exe is what's throwing the error.
View 1 Replies
View Related
Nov 19, 2013
How can I configure "Backup manager" to clear checkbox "During the backup process, website visitors will be redirected to the custom error document page with the search engine friendly 503 HTTP code" for default (for subscribers, customers, etc.)
View 1 Replies
View Related
Feb 19, 2014
I've tried to upgrade directly via Plesk Panel under Add or Remove Components but I get:
ERR_SSL_PROTOCOL_ERRORClick to expand...
View 2 Replies
View Related
Nov 10, 2013
I am struggling to install Wordpress. When I try I get the Error message:
Error: Installation of WordPress at http://xxx failed. Try to establish connection failed
This appears to be something simple but I don't know what I am doing wrong!
View 2 Replies
View Related
Jun 19, 2015
I received the following error regarding an auto update that ran on the server.
Execution failed.
Command: ai.exe
Arguments: Array
(
[0] => --select-product-id
[1] => panel
[2] => --select-release-current
[3] => --upgrade-installed-components
)
Details: ERROR: error during prepare patch panel-12.0.18~patch51...Failed to download the package URL.... The requested URL returned error: 500 Internal Server ErrorNot all packages were installed.Please try installing packages again later. I did verify with a web browser that I can access and download the WMIMSDNSProvider.dll file specified in the update. Is this just due to a timeout and the system retries the update? If so, how can I confirm that patch 51 got applied at some point.
View 1 Replies
View Related
Nov 25, 2014
We tried to restore the backup from source server 11.5 to destination server 12.0 , while uploading backup file to server repository & restoring it throws below error:
Internal error.The page cannot be displayed because an internal server error has occurred.
Error: Unable to upload the backup file (backup_nov23_******.com_info_1411230058.xml.zip). The file was modified, corrupted, created on another server or in an older Plesk version that does not support signing of backups. If you trust this backup, then select the "Upload backup files without valid signatures" option and repeat uploading.
Warning: The uploaded backup file (backup_nov23_**********.com_info_1411230058.xml.zip) was modified, corrupted, created on another server or in an older Plesk version that does not support signing of backups. Before restoring data from this backup file, make sure you can trust the source of this file.
We have excluded Plesk files from Antivirus as well but still we are facing the same error.
View 4 Replies
View Related
May 7, 2015
I am using the plesk 12 (Web Host Edition) with admin account. I need to configure file sharing in the plesk.
I referred this LINK
I filled up all required field in File Sharing Settings and Click "OK" button.
This error message,
(Error: Failed to perform IDN conversion from UTF-8 name '0') is shown.
View 1 Replies
View Related
Dec 17, 2014
I tried to import / restore a backup from dropbox but it was unsuccessful,
Restoration of the backup","status":Failed to Execute: "C:Program Files (x86)ParallelsPleskinpleskrestore.exe" --restore "C:Program Files (x86)ParallelsPleskvarmodulesdropbox-backupdomain.tld.tar" -level domains -filter list:domain.tld
View 3 Replies
View Related
May 26, 2015
I make full backup from my Plesk 11 server and Copy All files over %plesk_dir%/Backup to New server. When I tried to restore them I received this error !
Warning:reseller "banipersia"
Failed deployment of domain baqdad.com
Warning:
Execution of "C:Program Files (x86)ParallelsPleskbindomain.exe" --create baqdad.com -owner "" -do-not-apply-skeleton -notify false -guid D854C8FC-19DE-4256-A172-888155D012A9 -vendor-guid 194764FD-2B44-4F82-BA33-988DFF49FCFE -creation-date 2013-05-23 -ip 78.138.101.47 -ignore-nonexistent-options failed with return code 1.
Stderr is
Wrong syntax for command's '-owner' parameter. '' does not match the pattern '/^[^s]{1,255}$/'.
View 3 Replies
View Related
Apr 6, 2015
Login Plesk 12 In Error :
Operation failed
The operation you were performing failed. You can retry the operation with or without changing its parameters. You may also want to report this problem to our support.
Error show :
Access is denied.
---------------------- Debug Info -------------------------------
Windows 2012 and Mssql 2012 .
View 4 Replies
View Related
Jul 4, 2014
I have this big problem, when I try to create a new signature, it returns me this error (ProtDir_IIS :: update () failed: Add Protected Directory failed: columns SiteId, path are not unique (Error code 1)).
View 3 Replies
View Related
Feb 3, 2015
WINDOWS SERVER Plesk Panel version 12.0.18
Error: Test the database server connection failed:
mysqlnd cannot connect to MySQL 4.1+ using the old insecure authentication. Please use an administration tool to reset your password with the command SET PASSWORD = PASSWORD('your_existing_password'). This will store a new, and more secure, hash value in mysql.user. If this user is used in other scripts executed by PHP 5.2 or earlier you might need to remove the old-passwords flag from your my.cnf file
View 1 Replies
View Related
May 28, 2014
I'm having this issue when trying to set automatic backups to a separate server:
Cannot export dump file 'Friday_02_05_14_info_1405020913.xml' to 'ftp://Scott@00.000.000.00/Backup/'
[Transport error: unable to send directory to repository: Transport error: unable to put local file D:PleskPrivateTemp/repo_transport_tmp_01cf65e52b9bf130friday_02_05_14_1405020913.zip to friday_02_05_14_1405020913.zip: Curl error: Timeout was reached]Click to expand...
View 3 Replies
View Related
Aug 13, 2013
Since we upgraded to Plesk 11.5 or (I'm not shure) the last Update 12, user can not import MySQL-Databases anymore.
If the user open phpMyAdmin for import and select the database and click on Ok, phpMyAdmin does nothing.
I heard that could be a problem with JQUERY and I checked the files in ParallelsadminhtdocsdomainsdatabasesphpMyAdminjsjquery and all files seems to be there.
Only if I check the source of the phpMyAdmin Import-Website it seems, there is a problem with jquery-1.6.2+fix-9521.js.
But how I can fix this problem for all Windows-Servers.
View 19 Replies
View Related
Jul 9, 2015
I was trying to install Plesk on my Windows Server 2012 Standard, but it failed. It says:
" Failed to install 'C:ParallelsInstallerparallelsPANEL-WIN_12.0.18dist-msi-Microsoft-2003-i386plesk-site.msi':"
Error: The installation of the package 'plesk-site' failed with code 1603. (install: installing Parallels Panel WebSite...)
Please contact Support.
View 2 Replies
View Related
Feb 24, 2014
Two servers running Windows Server 2008 R2 and Plesk 11.5.30 MU #33 are running into the same problem with my daily FTP backup.
Problem is, the backup is fine as such, but the upload fails with the following error message:
Cannot export dump file 'backup_info_1402241551.xml' to 'ftp://xxx@xxx.net//' [Transport error: unable to send directory to repository: Transport error: unable to put local file C:Program Files (x86)ParallelsPleskPrivateTemp/repo_transport_tmp_01cf317215755ec0ackup_1402241551.zip4 to backup_1402241551.zip4: Curl error: Failed sending data to the peer]Click to expand...
View 5 Replies
View Related
