Plesk 11.5 (Windows Server 2008 R2)
I changed the dump location, but how do I change the default backup location on the destination server from:
C:Program Files (x86)ParallelsPleskPMM mp
To:
D: emp
Also, how do I change it on the source server as well? I have tons of space on the D drive, but only 200GB on the C drive.
How to run PHP in the default location?
When you open the pages of the local IP address 192.168.0.14 opens inetpubvhostsdefaulthtdocs
but only works html (index.html)
How to open a php (index.php)?
Microsoft Windows Server 2012 11.5.30 Update #49
I have several users using WordPress that has been installed using the Plesk panel. They want to change the directory that WordPress is installed to. I know if that is done that WordPress will no longer be able to be managed or updated using the Panel. Is there any way to change the folder structure so that this application can still be managed by Plesk?
I have a server with Plesk Panel 11.
When I create a domain, I created the folder:
c: inetpub vhosts.
I need to change the folder, since in that hard drive partition I'm running out of space.
How I can change the location of the folder where Plesk creates domains?
I have a Windows VPS with Plesk panel. Windows Server 2008 R2 with plesk panel version 11.5.30.
I tried to change the default plesk panel port (8443) to eg (1234) without any success.
The steps i followed are the following:
1) Firewall -> Inbound rule -> allow for port 1234
2) Firewall, Disable inbound rule for port 8443
3) IIS, PleskControlPanel, Bindings: changed binding from 8443 to 1234.
Now i type on browser: [URL] .... and while its loading after some seconds redirects me to [URL] ...
How can I configure "Backup manager" to clear checkbox "During the backup process, website visitors will be redirected to the custom error document page with the search engine friendly 503 HTTP code" for default (for subscribers, customers, etc.)
View 1 Replies View Relatedhow to change the default or the master datetime format for Windows 2003 Server Standard Edition.
My problem is as such.
- Have installed Coldfusion 5.0 on a Windows 2003 Server and have configured the part on the Web service extensions.
- One of the coldfusion program/application that is needed to be migrated from another server which is running Windows 2000.
- Encountered problem such as the datetime that is passed to the application when clients view on their workstations is different.
- My program take in dd/MM/yyyy but however it seems like the server is always default to M/d/yyyy or MM/dd/yyyy.
So, how can i change the default setting so that it will apply to the user account IUSR or across all accounts that is used on the server?
I have changed the maildir in Plesk according to [URL] ..... Everything works like a charm, however selinux doesn't allow access to the new directory. That means we get a permission denied and no mail is received at the server anymore.
Old location: /var/qmail/mailnames/
New location: /mnt/bigstorage/mailnames/
tail -f /var/log/maillog:
Mar 2 13:38:42 srv2 postfix-local[5983]: postfix-local: from=example@example.com, to=example@example.com, dirname=/mnt/bigstorage/mailnames/
Mar 2 13:38:42 srv2 postfix-local[5983]: cannot chdir to mailnames dir /mnt/bigstorage/mailnames: Permission denied
If we disable selinux, everything works, however this is not the best practice.
How can I fix this error without disabling selinux?
I uploaded the default skeleton files into the management ppa server at /var/www/vhosts/.skel/0/
But when I am creating a new subscription the skeleton is still the default plesk skeleton, something changed from ppa 11 to 11.5 ??
My server currently installed plesk 12 , I need to change wordpress default language ( default English )
Which aps table to edit language.
I am noticing that several of my users are wiping out their user root folders ( logs, error docs, etc...) when they fail to use '/httpdocs/' as the root directory when publishing with FTP.
I fixed this by editing the proftpd.conf to use ~/httpdocs/ as the DefaultRoot folder ( instead of just ~/ ).Would it be safer(better) to go through all the ftp users and make the home directory '/httpdocs/' instead of '/' in the admin UI? If yes, what is the best way to do a mass update of this setting for multiple users ( multiple domains ) ?
Is there a way to set the php-handle for all domais as "fastcgi".
At the moment when i create a domain, it will be run as "apache".
I like to change it to "fastcgi". I know there is way, to change it in the databases, but i forget where was it...
Is there a way to change the default value of the "Preferred domain" option in the hosting settings of domains in Plesk 11.5? When ever i create a new subscription/domain it just defaults to the value of "domain.ltd" and i have to go into the hosting settings and manually change it to "None". Is there a way i can set it to use the "None" option every time i create new subscriptions or domains?
View 14 Replies View RelatedI am running Plesk 11.5.30 on CentOS and trying to change the default permissions of the /httpdocs folder and the skeleton site that is in .skel/0/httpdocs that appears when a domain is created. I have failed to find the event that I need to use to trigger the command.
#!/bin/bash
chmod -R g+rwx "/var/www/vhosts/${NEW_DOMAIN_NAME}/httpdocs"​
Some research suggested using the 'physical hosting created' but there is no option for this in 11.5.30.
I've installed the Plesk Panel onto a windows 2008 server. It's all good, web sites are flowing and I'm really happy with the software. The issue I'm having is a customer has an asp site with an access database. After I uploaded their site, they couldn't write to the database, so I had to manually go and set the permission on the database for the "Plesk IIS Anonymous Account (IUSR_xxx)" user to have modify access on the file.
So my question is this, how can I set up the default hosting account to already allow this and so I don't have to go an waste time tweaking the folders manually trying to find the right permissions?
Also, why is it the Plesk IIS Anonymous account that needed to have it's permissions tweaked and not the "Default Plesk application pool user (IWAM_plesk(default))" which is the user who's configured on the application pool in IIS? I can't see where the Plesk IIS Anon user is being used.
I am installing plesk go to dns template for edit, when need remove defualt ns record recive this error :
Error: Unable to remove the NS record from the DNS template: Each DNS zone must have at least one NS record.
I am already add 2 ns record !!
i upgraded plesk few days ago to the latest version to be able to use it on my tablet.when i done so My mail enable webmail is not functioning anymore, it opens the default plesk website.i have mail enable enterprise version 6.6 licensed.i tried to rebuild i tried everything till now i tried to go to server components and try to disable the webmail and re enable it and see. so it disabled fine, when i tried to enable it gave this error: Error: Set default component failed: defpackagemng failed: Execute websrvmng --add-webmail-site --webmail=mewebmail failed with error code 1: Cannot find hosting by domain ID 47
how to get my webmail back up. an update, i have tried enabling horde first, then i tried accessing the webmail it worked with horde, then i went back to server components, when i tried enabling mailenable webmail now it didnt give the error and worked. (ONLY when horde is enabled with it) then i went back to mail settings tried to use mail enable instead of horde, now it gives service is unavailable! a complete new error. i went to iis i found that MailEnableAppPool status: stopped, i tried enabling then restart iis, once restart it gets back to disabled,
Is it possible in migration manager set a non default RDP port?
View 1 Replies View RelatedSeems that the default installation of Bind on Windows plesk 11.x (i don't know if is also for Linux), configure bind by default as open resolver. Then we must fix the problem using this kb:
[URL]
I'm wondering if i'm doing a wrong installation, of this type of installation is by default. In the second case, is there any reason?
Plesk12 on IIS8.5/Windows2012r2.
Migrating existing IIS websites into Plesk we are creating new clean websites and then copying the existing code across into the httpdocs directory.
Should we leave all the documents and file structures created by Plesk in place when we do this OR should we delete everything in the httpdocs directory and copy our code into here?
My one website & all it's sub-domains automatically showing Plesk Default Page . After checking further, I found websites were stopped on the server . I manually started them but after few hours again same status . I repeated the same thing several times but issue not fixed.
View 9 Replies View RelatedIs there a way to create global default nameservers for our clients to use in Plesk 11? A lot of clients rather not create their own nameservers, and would simply like to use ours. I can't find any settings in the Plesk Administration where you would create your nameservers as you would in other panels like cPanel/WHM.
View 3 Replies View RelatedWe have set up a site for a customer anyone goes to view the sites an a default authentication pop up appears, and the only way to view the website is to type in the customers Cpanel Login details.
I've checked the IUSR, IWPD permissions and they are correct. and check the authentication modules and level in IIS and they seems to be correct.
Is there away to set a customers permissions to the default settings?
I'm trying to copy a backup from the FTP server to the production server but I don't have enough space in the tmp folder.
There is a way to change where the backups are temporary until the hole backup is on the server? In case the only thing to do is to change where the tmp folder is mounted. This is a production server, I won't like to do it without knowing all the steps.
Code:
Error: Unable to reconfigure web server. websrvmng failed: Site MailEnable WebMail does not exist at IIS7WebSites::get() In IIS7NativeProvider module Exception type: System.Exception at IIS7WebSites.get(IIS7WebSites* , auto_ptr* , Int64 id, basic_string,std::allocator >* idnName)
Windows Server 2012
Plesk 11.0.9 Update #62
Note: Recently migrated from Plesk 9.2
Trying to set Default Site for a Dedicated IP Address.
I go to Subscription, then to domain > Change Hosting Settings, select dedicated IP address and OK, works fine. Site goes to Default Plesk Page.
Go to Tools & Settings, IP Addresses > Select the dedicated IP address I set above. Change Default Site to site above. Click Ok.
I get the error message above and nothing changes.
I looked on my IIS Server and MailEnable's Webmail is installed under the Default Website.
I have another Dedicated IP on this server and it has a default site on it working properly, but it was set up on the old site and it was configured as part of the Migration using Migration Manager.
I tried deleting the IP address and adding it back in. That didn't change anything. I also tried running: "%plesk_bin%websrvmng.exe" –reconfigure-webmail since that came up under someone else's issue when searching the web and that .exe is what's throwing the error.
I want to change subscription from vmtraininginstitute.com to vmtechnosys.com. How can i do?
View 1 Replies View RelatedI have a working PHP on the server, it is enabled and the sites are working. However they are not synced with the plan. If I try to sync it it shows:
PropertySubscription valuePlan valueAvailable valueAffected sites PHP supportswitched off switched onswitched off mydomain.com
Now how do I change the available value to be switched on?
Today I received this Error Message when i try to change php value for a Domain.
Error: ProtDirUser_IIS::update() failed: Update Protected Directory #427 user failed: no such table: ProtectedUrls (Error code 1)
I use plesk 11, I was creat sub directory: domain.com/test. but I access via test.domain.com is ok, but domain.com/test is error " page not found" how to I access via domain.com/test ?
View 2 Replies View RelatedI need to change to all subscriptions to php 5.4 version. How can I do at the same time to all subscriptions? I tray to change in the service plans but it's dont' run. We have more than 270 subscriptions, How do you change all the time?
View 8 Replies View Related
