Plesk12 on IIS8.5/Windows2012r2.
Migrating existing IIS websites into Plesk we are creating new clean websites and then copying the existing code across into the httpdocs directory.
Should we leave all the documents and file structures created by Plesk in place when we do this OR should we delete everything in the httpdocs directory and copy our code into here?
How Can I point [url]to httpdocs/MyFolder instead of httpdocs...
I am running a Plesk cp with apache web server.......
How Can I point [url]instead of httpdocs...
I am running a Plesk cp with apache web server.......
I have accidentally deleted httpdocs folder. But after that I create It manually and upload my website. Now It is showing 'Authentication Required' whenever I want to open my site through browser.
View 1 Replies View RelatedMy client was rather forcibly moved to a VPS by their host (long story, involving inadequate PHP memory allocations).
I've run sites on MediaTemple's VPS's without any issues. This one, via Network Solutions (not my pick) is driving me nuts. It uses Plesk and Virtuozzo, and is, I believe, running Redhat.
I am able to FTP files into httpdocs, but when I try to pull them up via browser, I get 404's. Additionally, the default landing page persists, even though I deleted their index.html.
I can SSH with root, but have thus far not been able to find my way to httpdocs via command line. Updated: scratch that. Found it. Files are there...
I am accessing solely via IP, as I do not want to redirect the domain until the new site is up and running.
Any thoughts on where I need to be looking for a solution? I'm not really a server person, though this is the first time I've encountered so much trouble. I do not foresee NS support being much help, per prior (recent) experience.
Moving sites from other servers into a Plesk 12 environment (Centos 6.5) I cannot see a way to set cgi-bin in the webspace root directory instead of document root (httpdocs). In previous Plesk CGI support allowed selection of cgi-bin location.
I have tried (to no avail):
Code:
/usr/local/psa/bin/domain -u mydomain.tld -cgi-mode www-root
/usr/local/psa/admin/bin/httpdmng --reconfigure-domain mydomain.tld
Code:
mysql> SELECT * FROM dom_param WHERE dom_id=x;
(where x is the dom_id of my domain) shows the cgi_bin_mode param has val www-root but no change to system/<domain>/httpd.conf.
Relocating cgi-bin to httpdocs/cgi-bin is not an option - some of these sites are development environments where I cannot move cgi-bin on the live environment and some of the scripts use relative paths.
Is this no longer possible in Plesk 12?
The following works (oops):
Code:
/usr/local/psa/bin/domain -u mydomain.tld -cgi-mode webspace
/usr/local/psa/admin/bin/httpdmng --reconfigure-domain mydomain.tld
mkdir /var/www/vhosts/mydomain.tld/cgi-bin
chown myuser:psaserv /var/www/vhosts/mydomain.tld/cgi-bin
when I FTP into my server, I can't see the files files and folders starting with dots, such as .thumbs or .htaccess. How do I configure my server (through SSH) so that these files are visible rather than hidden? I'm running Fedora on my server.
View 2 Replies View RelatedHow to run PHP in the default location?
When you open the pages of the local IP address 192.168.0.14 opens inetpubvhostsdefaulthtdocs
but only works html (index.html)
How to open a php (index.php)?
how can i hide all files and directories in public_html so when using apps suck Flash Get Site Explorere and similar software it will not show any file or directories in public_html.
View 5 Replies View Relatedis it possible to browse all the files and directories on a website even if it has a index page? If so how do you do that?
View 4 Replies View RelatedI've installed the Plesk Panel onto a windows 2008 server. It's all good, web sites are flowing and I'm really happy with the software. The issue I'm having is a customer has an asp site with an access database. After I uploaded their site, they couldn't write to the database, so I had to manually go and set the permission on the database for the "Plesk IIS Anonymous Account (IUSR_xxx)" user to have modify access on the file.
So my question is this, how can I set up the default hosting account to already allow this and so I don't have to go an waste time tweaking the folders manually trying to find the right permissions?
Also, why is it the Plesk IIS Anonymous account that needed to have it's permissions tweaked and not the "Default Plesk application pool user (IWAM_plesk(default))" which is the user who's configured on the application pool in IIS? I can't see where the Plesk IIS Anon user is being used.
I am installing plesk go to dns template for edit, when need remove defualt ns record recive this error :
Error: Unable to remove the NS record from the DNS template: Each DNS zone must have at least one NS record.
I am already add 2 ns record !!
i upgraded plesk few days ago to the latest version to be able to use it on my tablet.when i done so My mail enable webmail is not functioning anymore, it opens the default plesk website.i have mail enable enterprise version 6.6 licensed.i tried to rebuild i tried everything till now i tried to go to server components and try to disable the webmail and re enable it and see. so it disabled fine, when i tried to enable it gave this error: Error: Set default component failed: defpackagemng failed: Execute websrvmng --add-webmail-site --webmail=mewebmail failed with error code 1: Cannot find hosting by domain ID 47
how to get my webmail back up. an update, i have tried enabling horde first, then i tried accessing the webmail it worked with horde, then i went back to server components, when i tried enabling mailenable webmail now it didnt give the error and worked. (ONLY when horde is enabled with it) then i went back to mail settings tried to use mail enable instead of horde, now it gives service is unavailable! a complete new error. i went to iis i found that MailEnableAppPool status: stopped, i tried enabling then restart iis, once restart it gets back to disabled,
Is it possible in migration manager set a non default RDP port?
View 1 Replies View RelatedPlesk 11.5 (Windows Server 2008 R2)
I changed the dump location, but how do I change the default backup location on the destination server from:
C:Program Files (x86)ParallelsPleskPMM mp
To:
D: emp
Also, how do I change it on the source server as well? I have tons of space on the D drive, but only 200GB on the C drive.
Seems that the default installation of Bind on Windows plesk 11.x (i don't know if is also for Linux), configure bind by default as open resolver. Then we must fix the problem using this kb:
[URL]
I'm wondering if i'm doing a wrong installation, of this type of installation is by default. In the second case, is there any reason?
My one website & all it's sub-domains automatically showing Plesk Default Page . After checking further, I found websites were stopped on the server . I manually started them but after few hours again same status . I repeated the same thing several times but issue not fixed.
View 9 Replies View RelatedI have setup a new CentOS 6.6 server with Plesk version 12.0.18 and everything works as it should apart from the fact that in Filezilla the connection for domain1.com points to the httpdocs directory for domain2.com and vice versa. In the plesk filemanager and in a web browser the domains point to the right directory.
View 4 Replies View RelatedIs there a way to create global default nameservers for our clients to use in Plesk 11? A lot of clients rather not create their own nameservers, and would simply like to use ours. I can't find any settings in the Plesk Administration where you would create your nameservers as you would in other panels like cPanel/WHM.
View 3 Replies View RelatedWe have set up a site for a customer anyone goes to view the sites an a default authentication pop up appears, and the only way to view the website is to type in the customers Cpanel Login details.
I've checked the IUSR, IWPD permissions and they are correct. and check the authentication modules and level in IIS and they seems to be correct.
Is there away to set a customers permissions to the default settings?
I have a Windows VPS with Plesk panel. Windows Server 2008 R2 with plesk panel version 11.5.30.
I tried to change the default plesk panel port (8443) to eg (1234) without any success.
The steps i followed are the following:
1) Firewall -> Inbound rule -> allow for port 1234
2) Firewall, Disable inbound rule for port 8443
3) IIS, PleskControlPanel, Bindings: changed binding from 8443 to 1234.
Now i type on browser: [URL] .... and while its loading after some seconds redirects me to [URL] ...
Code:
Error: Unable to reconfigure web server. websrvmng failed: Site MailEnable WebMail does not exist at IIS7WebSites::get() In IIS7NativeProvider module Exception type: System.Exception at IIS7WebSites.get(IIS7WebSites* , auto_ptr* , Int64 id, basic_string,std::allocator >* idnName)
Windows Server 2012
Plesk 11.0.9 Update #62
Note: Recently migrated from Plesk 9.2
Trying to set Default Site for a Dedicated IP Address.
I go to Subscription, then to domain > Change Hosting Settings, select dedicated IP address and OK, works fine. Site goes to Default Plesk Page.
Go to Tools & Settings, IP Addresses > Select the dedicated IP address I set above. Change Default Site to site above. Click Ok.
I get the error message above and nothing changes.
I looked on my IIS Server and MailEnable's Webmail is installed under the Default Website.
I have another Dedicated IP on this server and it has a default site on it working properly, but it was set up on the old site and it was configured as part of the Migration using Migration Manager.
I tried deleting the IP address and adding it back in. That didn't change anything. I also tried running: "%plesk_bin%websrvmng.exe" –reconfigure-webmail since that came up under someone else's issue when searching the web and that .exe is what's throwing the error.
How can I configure "Backup manager" to clear checkbox "During the backup process, website visitors will be redirected to the custom error document page with the search engine friendly 503 HTTP code" for default (for subscribers, customers, etc.)
View 1 Replies View RelatedI have a scheduled backup set on my panel, to backup all server configuration and content, and is set to run every week. I also set to keep only 1 backup on repository, but this config doesn't seem to work! My hard drive is getting full all the time, and when I check that its because theres a lot of old backups stored that are not getting removed!
My question is: the backup script removes the old files only at the end or it does it while backing up? If the action of removal happens only at the end of the script, i think it would explain why it isn't working: my hard drive gets full before, and the script drops an error, and never get to the end of it and it doesn't remove the old backups.
My Version: Parallels Plesk Panel v11.0.9_build20120609.17 os_Windows 2008
I'm backing up a domain in Plesk Panel 11.0.9 on Windows, it's a large backup with 50,000+ images in it so the backup gets split into multiple zips
xxxxxx__xxxxxx.com_vhost_1309200100.zip
xxxxxx__xxxxxx.com_vhost_1309200100.zip1
xxxxxx__xxxxxx.com_vhost_1309200100.zip2
xxxxxx__xxxxxx.com_vhost_1309200100.zip3
Now what I want to do is restore 11 files from the backup. What I certainly don't want to do is restore the entire domain as I don't want to loose any changes since the last backup.
As it seems impossible to extract files from the archives.
I had a Problem with my FTP-Backup space, so PLESK couldn't do the daily backups that I configured. The problem with the ftp backup is solved. The backups are running again but there are still many large temporary files in a plesk folder.
Can I just delete them, or is this a bad idea?
The folder:
C:Program Files (x86)ParallelsPleskPrivateTemp
Screenshot
I just recently created a new server with windows 2012 R2 server and need to move the mail and backups to another drive.
I have tried to run the Plesk reconfigurator as an Administrator and it comes up with the following error message see attached screenshot
If users copy files/folders on Plesk Panel 11/12 with attribute "read-only", I don't see this attribute on File Manager, every time do next "attrib -r <path to file/folder".
Maybe you can improve functionality of "File Manager" on Plesk Panel 12?