I am using Parallels panel 11.5.30 Update #44 on CentOS 6.5 (64bit version) located on VPS. What is the easiest way to update:
- PHP 5.3.3 to PHP 5.5.12 (current stable version) and
- MySQL 5.1.73 to MySQL 5.6.18 (current stable version).
Is it possible to update these from Plesk's control panel?
I have Parallels Plesk Panel v.11.5.30 on CentOS (Linux version 2.6.32-431.3.1.el6.x86_64) and I get error message whenever Plesk tries autoupdates.
Problem started to appear just after I updated server with atomicorpURL....When I try to update manually through console (yum update) I get following error:
Code:
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA1 Signature, key ID 4520afa9: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY.art.txt
The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.When I try to update any component manually through panel I get following error (This is for Apache web server support):
Code:
Installation started in background
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
* atomic: www7.atomicorp.com
* base: mirror.checkdomain.de
* extras: mirror.checkdomain.de
* updates: mirror.checkdomain.de
[code]....
Fatal error during packages installation: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.YumBaseError: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository. Error: Failed to run the Yum utility.The Yum utility failed to install the required packages.Attention! Your software might be inoperable.
For some time now the Autoinstaller fails and the Plesk control panel becomes inoperable until I run the stop and then start command for the plesk control panel. Looking at the error log: autoinstaller3.log I see the following output:
WARNING: Third-party Yum repository 'atomic' is enabled, installation may fail.
Since you use one or more 3rd-party repos (say, atomic), be careful when installing different package versions from different repos as this may lead to installation failures. For example, you may encounter a problem if you first install PHP from a 3rd-party repo and then upgrade it using the Parallels repo. To avoid such situations, install and upgdare packages from the same repo.
Traceback (most recent call last):
File "/usr/local/psa/bin/yum_install", line 194, in <module>
main()
File "/usr/local/psa/bin/yum_install", line 189, in main
[code]....
The Yum utility failed to install the required packages.Attention! Your software might be inoperable.contact product technical support.Click to expand...
is it safe to Upgrade Parallels 11.5 to 12 from the panel
OS
CentOS 5.10 (Final)
Panel version11.5.30 Update #48, last updated at Nov 21, 2014 02:33 PM
I have a problem to login Parallels Plesk Panel, on a 1and1 vps.
When I click on "login", it just reload the page (I'm sure that username and password is correct).
I have a message of failure during autoupdate of my plesk ...
The logs are.
Code:
Execution failed.
Command: autoinstaller
Arguments: Array
(
[0] => --select-product-id
[1] => plesk
[2] => --select-release-current
[3] => --upgrade-installed-components
[4] => --include-components-from-class
[Code] ....
ERROR: Installation will not continue
Not all packages were installed.
Please, contact product technical support.
when trying to uninstall this extension I get the following error: Executing /opt/psa/admin/plib/modules/panel-news/scripts/pre-uninstall.php failed.
View 3 Replies View RelatedAfter installing Plesk 12.0.18 Update 43 on windows when I try to connect to Plesk Panel (https://myurl.com:8443/) I get error:
ERROR: PleskMainDBException: Host '127.0.0.1' is not allowed to connect to this MySQL server (db.php:435)
I tried to reset mysql admin password as described in article - with no luck : [URL] .....
I even tried to reset password:
%plesk_bin%plesksrvclient -set "newpassword" true
Again I get "Faild to connect to database: Host '127.0.01' is not allowed to connect to this mySQL server
All websites that uses mySql works but Plesk Panel is dead?
I want to upgrade to Plesk 12, but want to make sure current version of 11.5.30 is working properly.Whenever Plesk tried to update I get the following error.Installing packages
Loaded plugins: fastestmirror, priorities, refresh-packagekit
Loading mirror speeds from cached hostfile
* atomic: www5.atomicorp.com
* epel: mirror.compevo.com
437 packages excluded due to repository priority protections
[code]....
Fatal error during packages installation: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository. YumBaseError: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package. Check that the correct key URLs are configured for this repository.
ERROR: Failed to run the Yum utility.The Yum utility failed to install the required packages.
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
11.5.30 Update #44, Ubuntu precise 64bit
PROBLEM DESCRIPTION
Upgrade fails with message: Failed to update Panel.you can send the update log to Parallels support. View the update logs (May 22, 2014). Copy the logs to your computer before you close this message.
On one CentOS 6.5 Plesk 12.0.18 install (with all MUs applied) each time an admin logs in a notification is displayed ("Plesk was successfully updated. View detailed information on the updates.") and once a week the panel generates an email notification (Plesk panel updated successfully).
Other Plesk 12.0.18 servers that are set to automatically update aren't generating this email notification or displaying the "green" notification upon login to the Plesk Panel. Is there a flag, tmp file, or a DB trigger that isn't being set properly to cause this?
I am using CentOS 6.4... I cannot login to the admin page. Showing this message:
Error: Unable to log you on. An internal error occurred in the Single Sign-on authorization engine. Please try to log in later, and contact your hosting service provider if the problem persists.
Error log:
Doing restart of Parallels Installer...
2014-05-17 01:08:38: (server.c.1543) server stopped by UID = 0 PID = 10122
2014/05/17 01:15:04 [crit] 16495#0: *1 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: 127.0.0.1, server: , request: "POST /plesk-billing/task-manager.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "localhost:8443"
[Code] ....
I have tried this post: [URL] ....
[root@ns4008757 ~]# /usr/share/plesk-billing/integration --command=repair-all
Customer & Business Manager is not installed yet.
[root@ns4008757 ~]# /usr/local/psa/bin/sso -g
SSO status: on
SSO server url: https://XXX.XXX.XXX.XXX:8443
SSO API version: sw:sso:idp:1_0
SSO Application ID: z9fabw14uesl6ccoz0wnpwk68eghgvs6ny7
After running this two lines, when i login to admin panel, it shows: Can not extract SAML message.
my plesk control panel 11.5.30 has problems running the auto update of the panel. During the upgrade, the server reboots even after an error message appears that shows the following message: Can't parse /root/parallels/products.inf3: Error reading end tag.
View 4 Replies View RelatedI'm using Plesk 11 in a Ubuntu 12.04 Linux environment on a remote dedicated server. I am NOT trying to upgrade to Plesk 12. But, every time I log onto the panel, I get the error message shown on the subject line. Afterward, it says, "To solve this problem, send an update log to Parallels support." I have the update log ... but "where" to send it. Is there an email address? A webpage?
View 10 Replies View RelatedI'm getting the following alert in my Plesk 11.5 panel :
1) Failed to update Panel. To solve this problem, you can send the update log to Parallels support. View the update logs (Oct 27, 2014). View the update logs (Oct 28, 2014). Copy the logs to your computer before you close this message. To close this message, click here.
2) Installation or upgrade failed. For more information, log in as root to the server over SSH and view the file /tmp/plesk_11.5.30_installation.log. To remove this notice, remove the file /var/lock/parallels-panel-upgrade-failure.flag from the server. Repair the failed upgrade or installation.
----------------------------
here the final part of the update log:
----
===> Cumulative APS controller database (apsc) upgrade has been started.
===> Upgrade of APS controller database has been completed.
===> Cumulative Plesk database upgrade (revertable stage) has been started.
[Code]....
After doing the upgrade to v12.0.18 when I go in : tools , updates the page does not load . I added to the firewall port 8447 but nothing .
View 8 Replies View Relatedi want to uprage my plesk panel to 12. But i have this problem
"Parallels Panel pre-upgrade checking... 'wmic.exe' is not recognized as an internal or external command,
operable program or batch file.
FATAL_ERROR: Unable to get IP address"
I have the problem described here: [URL]
But my Plesk's license allows to use MS SQL Servers.
This began to happen after upgrading Plesk 11 to 12.
In psa Database, in DatabaseServers table it appears. If I delete and add back into Plesk, it shows me no error, but neither added to the database servers.
Receive for 2 days following error
"Parallels products install and update"
"Failed to read product information from the file: Can not process products.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/products.inf3: Could not resolve host: autoinstall-win. pp.parallels.com, no data record of requested type Can not process versions.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/versions.inf3: Could not resolve host: autoinstall win.pp.parallels.com, no data record of requested type "
[URL] .... is present.
[URL] .... is not found.
In Plesk Control Panel accessing Updates and Upgrades have a error that shows Failed to read product information from the file :
Can't process products.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/products.inf3: Empty reply from server Can't process versions.inf3: Failed to download the package http://autoinstall-win.pp.parallels.com/versions.inf3: Empty reply from server
Site has disappeared, though still shows normal in Parallels Panel
I keep a simple site for my art portfolio and some misc files hosted with unlimitedwebhosting.co.uk and Parallels Plesk.
Yesterday I noticed that the site and all its contents give a 404 error, and the home page shows the default page generated by Parallels Plesk Panel. However, all my files are still accessible from ftp and the Panel:
The index.html file is still the same old one as it should be, yet the homepage doesn't show it.
As per the default setup, all the content of the website is in the httpdocs folder, not the root. Though I did try copying the index.html to the root and see if that worked, but it did not. I'm very inexperienced when it comes to web hosting and everything related, so I'm not sure if it's somehow user error or if I should try to contact Parallels.
Here's a history of emails I received from them - notice how the invoices are followed by multiple payment confirmations:
So perhaps cancelling the one payment made them think I wanted to cancel the hosting and the site was taken offline? I don't know.
Every day we get a couple off Parallels.Diagnostics.RRD.RrdStorageProvider errors:
Parallels.Diagnostics.RRD.RrdStorageProvider - <log4net.Error>Exception during StringFormat: Input string was not in a correct format. <format>Update to database {0} has failed [{2:HH:mm:ss:ffff}]. {1}</format><args>{cpu-1.rrd, Parallels.Diagnostics.RRD.RrdException: Failed to update RRD database "C:Program Files (x86)ParallelsPleskvarhealthdatalocalhostcpu-1.rrd":ERROR: could not lock RRD
, 00:00:09.6084608}</args></log4net.Error>
Source: ParallelsHealthMonitor
We are running a Windows 2008 R2 Enterprise server with the latest Plesk 11.5.30 update 16.
Updates ran over the weekend and I can no longer login to the Plesk Panel. I'm getting the following PHP error: Fatal error: Call to undefined function get_gpc() in D:Plesadminhtdocsindex.php on line 3Click to expand...
View 1 Replies View RelatedAfter updating i'm unable to login to the plesk panel with every user account.
---------------------------------------------------------------------------------------
Url redirect: https://[domain]:8443/sso/api.php?api=/ui
Error: Authentication failed: invalid username or password specified
---------------------------------------------------------------------------------------
The usernames and passwords are correct.
Does Parallels support Plesk 12 being installed on a Linux VM that is provisioned on Microsoft Windows Server 2012 R2 Hyper-V?Is it fully supported?
View 2 Replies View RelatedI recently changed the main domain url from website.com to www.website.com, this resulted in 404-errors when i navigated to wordpress...
I found a solution on the internet and updated the records with phpmyadmin [URL] ....
When I click on Login at the the WordPress Installations I'm still being navigated to the old website url. It supprices me that there is no option to change it on Plesk level after wordpress is deployed.
How can i change or update the wordpress path once it is installed in Plesk?
I'm using CentOS 6.2, maybe there is a config file or an database for Plesk?
Buy the new Dedicated Server Self-Managed Dedicated Servers - Self-Managed - Intel Xeon E3-1240v2 Quad Core But i don;t have cpanel installed in my server i had now Managed VPS Server with whm panel had only 1 site [URL] .... don't have too much data i m facing server issue problem they request me to buy dedicate server i buy self manage server it cost me less but now i search on google alternative whm i find parallels but i m new here don;t know how to install and transfer it WHM tO Paralllels plesk panel
View 4 Replies View RelatedTools & settings > plesk > updates & upgrades.
I tried to open updates & upgrades, with above flow, using the same username and password to log in the panel, on :8443, but the page said the username or password is not valid. attached screenshot....
I'm new user for parallels and plesk. I new install plesk 12 for my hosting provider but i have problem step by step integration whmcs.
View 2 Replies View RelatedI have a new 1 and 1 hosting account and have reimaged to have Plesk Panel 12 as I have used Plesk with another virtual server account.
However I do not know how to install the mail server.
Is there a simple way to install the mail server so I can set up pop mail boxes?
I have a problem with my plesk panel. Ever since I rebooted my server it won't load the IP:8443 page at all.
View 5 Replies View Related