R1Soft CDP Backups
May 16, 2009Can anyone recommend a provider/reseller either in the UK or US?
View 6 RepliesCan anyone recommend a provider/reseller either in the UK or US?
View 6 RepliesLooking for advice on a solid R1Soft setup.
I'm currently looking at this SAS Expander:
[url]
Looking to load it with 16 x 500GB WD Green drives with two spares on hand. Not sure which RAID level, RAID 5,10,50,60
No matter what I use with that many drives I get huge capacity. This is the controller card I was looking at using as well for the direct attachment:
Adaptec 2228800-R PCI Express SATA / SAS (Serial Attached SCSI) 5445 Kit Controller Card
I was going to use a Dell PE 860 to bring it all together. What are your thoughts, opinions, suggestions for a proper or recommended R1Soft setup?
where is the place to get backups utilizing R1Soft.
Something we are looking at and wondering as to what would be the best companie/s to have your backups at.
R1Soft is a backup “solution” aimed at companies that want to backup only the changes that have been made since the last time a backup was created. Its a good idea, but it went horribly wrong. I am writing about it today because it was such a poor experience working with them and we had so many server problems and REPEATED DATA LOSS that I felt compelled to warn other hosting companies and customers about this extremely poor product.
R1soft caused enormous I/O load that literally killed our servers off and on multiple occasions simply would not restore our data and caused 100% data loss on the servers we had “backed up”.
MAJOR TECHNICAL DEFICIENCIES AND OPERATIONAL ISSUES WITH R1SOFT -
1) Buagent (Their software that records what has changed) is a HUGE i/o pig. It constantly blocks on I/O when there are changes causing every other drive or array in our system to lag while it catches up. R1soft told me it “works great” and to send them over details and they would “Look into it”.
2) Buserver (Their software that writes what has changed) is INCREDIBLY slow in every way that it is virtually unusable when you have a lot of data to back up with tens of thousands block changes every day per server. Clearly it hasn’t been tested well under sustained and real heavy load - at least in my opinion. There are multiple kernel and userspace methods to speed this up, but again it falls flat on its face when trying to keep up with our load.
3) Restores are buggy and VERY unreliable. We have attempted more than 20 restores (whole partitions) and had more than 30% be a complete failure, meaning TOTAL data loss. Doing user level restores were the same story - incomplete backups, unreliable and SLOW restores.
4) R1soft support is lackluster to say the least. When I complained they said, “You only opened 17 tickets in the last 60 days.” 17 tickets? Often when we had issues doing a restore or other problems we would call and get no one to answer the phone. Its comforting to know that when you can’t do a restore for 500 clients that we can possibly talk to someone on Monday who will blow us off and tell us that the newest version of the software MIGHT fix our issue. In the meantime they apologized for losing all our data over and over again. Wonderful.
5) The software is based on filesystem block changes. The problem is that the kernel and ext3 and reiser are changing all the time. As we made updates it constantly broke R1soft. When they would finally fix the problem it usually required us to reseed the entire backup again losing everything that we had previously backed up and putting enormous load on the server again while it started over from scratch
In all my years of hosting I have never had such a bad experience with a “partner” company as R1soft.
Just thought I would let other potential customers and hosting companies know my experience.
I am currently moving my accounts to providers that use R1Soft as a backup solution. This is a security measure, but I am planning to use it as a marketing point too.
An after purchasing a backup account from Steadfast that includes support for R1Soft (and learning to use it), I am planning to resell their product.
Those ideas sound good, but is R1Soft software really as good as it looks like? Some years ago i had a problem with a very known (and trustable) VPS provider. After having a hard disk crash, they told that their Virtuozzo based backups weren't reliable, so I lost some data.
Anyone have any experience using R1Soft in a virtualized environment as the VPS provider rather than the VPS user?
I'm wanting to offer some solid bare metal backup. It is generally difficult to do sound backup procedures in dom0, since can sometimes suffer file corruption when backing up running domUs from outside of them, and I use LVM drives rather than disk images.
I've always heard backing up from inside domU is best.
R1Soft is an obvious option but the pricing seems quite high and I'm wondering what kind of CPU/disk usage impact it could have. Say you just have 16 virtual servers per box (2 per core)... that is 16 instances running, and ~$2400 just in licenses alone.
Anyone have any experience doing backups/CDP in a virtualized environment? You using R1Soft or something else? Inside domU or out?
I wish R1Soft offered monthly pricing, since then the upfront investment per customer isn't nearly as much.
if anyone here is using Steadfast R1Soft CDP Backup for his servers and if it's truly working for him when a restore is needed and whether is causes a noticeable load or not?
View 14 Replies View Relatedhow much R1soft costs?
Is it worth it?
Do you have to keep your backups on one of their servers?
I got an idea that using r1soft CDP to move server, since it provides restoring data to a different server. But I never used it, not sure if it is doable.
Any one did this before? any requirements (software/hardware) for new server that will be moved in?
what backup solution you all use. We plan on starting to use a backup solution but was wondering what the best one is. R1Soft seems to be pretty popular and I was wondering where all of you guys get your licenses from them. Also if anyone knows how much does a license for 1 backup server and 2 agent servers cost. I see it is like $500.00 at R1Soft directly but is that the only way to get it. Also is R1Soft very good? Please rate it 1 -10 in your reply.
View 8 Replies View RelatedI have several servers and i want to provide at my servers a continuos backup data protection and disaster recovery backups to a off-site location using R1Soft software.
So does anyone knows any good and reliable company who provides the service off making backups from external servers using R1Soft?
I have been looking around and until know i found:
The Planet - Here i can buy any kind of server and havint installed with R1Soft for a extra cost of 50$
SteadFast - Here i can rent a full managed backup service using Steadfast Off-Site R1Soft CDP Backups described at: [url]
on this backup solution. How do they do the backups. If you`re a datacenter, are backups routed through the internal network through a central backup server or do you backup externally to their servers?
View 6 Replies View RelatedHow do you restore a cpanel server with r1soft?
I know need to restore /home
but if I restore /etc /usr /var it will screw up stuff, ex. /etc/modules.conf
and if I don't it will be missing stuff, like /etc/userdomains
Anyone know the best way to restore from an r1soft backup?
I have recently had to set up all my backups again (add me to the ranks of disappointed bqinternet customers). I choose to go with Handy Networks - and I am SO very happy I did. The got all my servers set up quickly and correctly, but the most impressive thing was the communication - it is one of the best support experiences I have had in this industry. Not only on the initial set up, but even the questions i had afterward - they went above and beyond in their answers.
I know companies get ripped all the time on here for bad support - just wanted to give a little praise!
Should/home be its own partition when using r1soft, or can it be part of/?
View 7 Replies View RelatedDoes someone know any other company besides fxhbackup and bqinternet that sells backup services based on R1Soft CDP?
My current solution is constantly giving broken pipe lines error. I was told this is because of overloaded backup servers. I did had my own CDP server running on the same DC and it worked like a charm, but currently my provider says it will not support it anymore and its terrible slow on his CDP server, besides it breaks backup.
Can someone point me one a CDP solution that works?
Has someone had experience with Acronis True Echo Server Enterprise?
Am I correct the r1soft does not preserve permission/ownership?
View 5 Replies View RelatedIn WHM I set my backups to go to the / directory in a flder called backup. This filled up rather quick and that partiton is now full!
I was going to change the location to /home as i have over 400GB of space here but it says: Setting this to /home is a very bad idea.)
How many would you guys recommend me? Currently I make backups on my own server and one at offsite. And what's the diffrence making backups trough ssh ot ftp? Because right now I work with ftp because I don't understand ssh.
View 4 Replies View RelatedI have a VPS and an NAS in same data center that are connected via a private network within the datacenter. I can access the datacenter's private network and both servers via VPN.
I can access VPS via SSH. How do I FTP the data on the VPS to the NAS without downloading to my desktop and re-uploading?
I've got a VPS with SLHost and have setup a remote backup account with RVPalace
The VPS is running WHM/Cpanel
I'm running a fairly busy forum and host a few friends sites on the server to. (CMS systems etc)
What's the best way to go about backing up the data to this remote host?
Would you say WHM's backup system is sufficient?
I don't feel comfortable with one backup every 24 hours, so i'm wondering if there's anyway to reduce that to every 6 hours?
Or would you guys recommend RSync instead?
I do have a question regarding RSync...something that worries me
If it's set to backup the sites every 6 hours and only backs up when something changes (Files/databases)
If, god forbid, a site gets hacked, but isn't noticed and Rsync kicks in and backs up the hacked site, there'd be no way to go back to a previous backup, would there?
what I want to do is a backup every night of the files on my servers from the Data Centre to a server in our local office. What would be the best program to do this?
The OS would be Windows Server 2003.
I have a dedicated server that only has around 3-4gb of data on it. I would like to do automated nightly backups for as cheap as possible. I don't want to pay to have my server managed just to be able to have automated backups, so what other solutions do I have? I know I can get really cheap storage from Amazon or Mosso, but is there a way to automate this?
View 10 Replies View RelatedI would like to know what is the difference in cpanel between a full backup and a daily or weekly backup, and how they work together. I was under the impression that a daily backup was a backup of all the files at the end of the day but apparently according to my host this is not so, and Im a bit confused as to what is the purpose of the daily and weekly backup.
View 2 Replies View RelatedFTP backups, doing RSYNC what is needed?
I have a linux box with pure-ftpd as FTP backup server. However, we want to explore/expand to RSYNC now.
Is there a package that allows RSYNC to be used for FTP users?
This is basically like what do FTP services like BQbackup use to allow RSYNC, etc.
I have dedicated server and I have daily,weekly and monthly backups located in:
root: /backup/cpbackup (my secondary drive)
each account's backup locate in specific directory like:
the backup of account website1.com will be located in:
root: /backup/cpbackup/website1
all backups are not compressed file
So, How can I restore one or more backup?
any one know where Plesk stores all the backups on a vps
I want to download all these using automated FTP
how to restore an account from backups as my WHM backs up to an external server via FTP and I dont have a clue how to restore.
View 7 Replies View Relatedif anyone knows about cheaper and reliable colocation services in East/ Central. I don’t need premium bandwidth (Internap, Level 3, etc). I need to colocate ½ rack to host my Backups, Bandwidth needed is 5 MB since I use Rsync at different hours, so I don’t need to push more than that.
I try to look for colocation services here in Colorado, but all companies quote me $50 to $70 for each server and $130 per MB.
Check this out... I was just diggin around in my Dreamhost panel and discovered something new that I've not even seen announced anywhere... Dreamhost is giving a BACKUPS user on each account, totally separately from the web user. You are allowed... well, I'll just copy / paste straight from the panel:
At DreamHost, you may only keep website-related content on your regular users. You do, however, get one user per account where anything legal may be stored; your Backups User.
This user cannot have any websites pointed to it, nor may you share files via it... it is only to be used as an off-site backup for your personal files.
As such, we keep no backups of files on this account. These are already supposed to be your backups... not your only copy!
(Of course, you should always keep your own copies of all data stored with us.. we make no guarantees!)
Every full DreamHost Hosting plan includes 50GB of backups space!
(Additional usage will be charged at the rate of 10 cents / GB a month: the best backup deal on the net!)
Pretty interesting... they didn't HAVE to do that, it's just another one of those things that they give in order to be even MORE awesome, evidently.
Rsync seems to be popular as a backup solution, so I thought I give it a look myself. However, after looking for a while I think it is lacking in either (1) usability or (2) security for backups.
Lets use a backup of /home for example:
(1) To make the transfer secure I'd use rsync over ssh. Backup works great - untill you have to restore. Restore works only partially, because all the files now have the user/group id of the user on the backup server (even if the restore is run as root). You'd have to chown all the individual users dirs, permission files....error prone and a lot of manual work --> not good.
(2) Running rsync in daemon mode on the remote server preserves uid/gid and permissions. Restoring works like a charm when run as root. But, hey, now every 13 year old with some knowledge and a packet sniffer can write down your data unencrypted. They just need to look for -lets say- db-info in php files etc and suddenly have access to your customer base or whatever you store.... Even worse if you transfer db dumps or other sensitive data. So it is not safe to use --> not good.
Is there a way to secure the transfer or keep uid/gid info intact?
And how do all the backup providers handle the issue? (This one here claims rsync is secure.)
Or is there another way to fix the problem - restoring uid/gid and secure transfer for backups.