Since 3 Days the "daily maintenance script" isn't working anymore.
Task info
[table="width: 500, align: left"]
[tr]
[td]Task ID[/td]
[td]43315[/td]
[/tr]
[tr]
[td]Task name[/td]
[td]Run the daily maintenance script[/td]
[code]....
I am working on a new install of PPA, and after installation on the management node Im trying to add the other nodes. Ive tried to add a Apache, Postfix, DNS & DB node, and they all have the same issue. The installation task fails with the following error:
Destination host 'node.domain.com' (#3), IP '192.168.1.*' : The operation can not be completed because the following component is missing or is not running: pleskd (sc_name '', sc_id #45)
(domain and IP are removed here, correct in the original error. The IP is a backchannel IP, and the public IP was properly set in the management node).
I've verified that pleskd was installed and is running on each node:
Code:
24710 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal
24712 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal
24714 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal
...
I've verified that my management node can connect to the nodes in question via 8532:
Code:
]# telnet 192.168.1.* 8352
Trying 192.168.1.*..
Connected to 192.168.1.*.
Escape character is '^]'.
^]
telnet> quit
Connection closed.
So there shouldn't be any firewall or other networking issues.
What else can I try to get this running?
I am trying to install Automation, and I keep getting an error after the "Getting SELinux" step, here is a log of the process so far:
Code:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-5-x86_64
[INFO]: Getting SELinux state...
[ERROR]: Unexpected error: ''
[Code] ....
I have tried running the installation on a different server and the same issue came up...
I am installing plesk automation on centos 6.5 using this command on a fresh system
./ppa_installer --password some_password --admin_email some_email
and get the following error.
[LOGTEE]: Error Downloading Packages:
[LOGTEE]:
[LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
Looks like some lib is not found in the mirrors.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is:
2.6.6 (r266:84292, Jan 22 2014, 09:42:36)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
How can I set up task schedule every minutes to wget "https://domain.ru/cron.php"?
View 1 Replies View RelatedI guess the Plesk 12 is the best version of plesk for windows since i work with plesk on version 8.
But the backup task still has a problem, now i can't backup my server using backup manager. If i create a manual task to create backup after few hours the server and plesk just get to slow to use. Only when i remove task i can use back server.
When Parallels create a backup task who's really work ?
How can i backup all my accounts of server in case of crash?
Is there a way to run an additional task after the scheduled backup has completed?I want to copy the backup off-site. I can't use FTP, otherwise I'd use the built-in 'Personal FTP Repository' feature. (See Rsync, Amazon S3, Rackspace cloud files, etc)
I could just create a new scheduled task, but the backup takes an unpredictable amount of time, and the tasks need to run sequentially. Also, the 2nd task should only run if the backup succeeds.
I could disable the backups in the control panel and create a new scheduled task that does both the backup and the additional task. But then the functionality of the control panel's Backup Manager page is lost.
In plesk it has the ability to schedule a task. It apparently only works for EXE files and php pages ? I that correct ?
How do we schedule an ASP page to run as a task ? I have been trying shells, scripts,
Our data system maintenance and monthly billing are all ASP pages that need to run automatically. Some tasks need to run every 15 minutes.
an email notification for this is coming through every day. It says ended successfully so no errors...
Running task: C:Pleskadmininweb_statistics_executor.exe
Started: Fri Jun 19 01:49:01 2015
Ended successfully: Fri Jun 19 01:49:09 2015
If i go to Server -> Scheduled Tasks and look for it, it cannot be found anywhere. Also scheduled tasks only shows system users, not 'Plesk Administrator' as the kb articles refer to.
I want to add a schedule task for run a script.
Path to executable file: C:Windowssystem32cscript.exe
Arguments Field: E:vhostsmysite.irhttpdocsschedule.vbs
But i get error:
Failed with error: 'C:Windowssystem32cscript.
exe ' is not recognized as an internal or external command, operable program or batch file.
I recently updated from 11.5 to 12. After the update, my simple "Websites & Domains->Scheduled Tasks" is no longer executing.
I verified that the task is still present in Plesk and enabled.
The simple task launches one of my PHP web pages to perform an action:
(set to once a day: Min=30, H=7, DM=*, M=*, DW=*)
wget --quiet --delete-after "http://www.MYWEBSITE.com/some/path/index.php?someparam=somevalue"
This cron job had been working fine for more than a year but stopped working after the update.
I'm running: 12.0.18 Update #29
I'm having troubles getting the global scheduled backup task to work at Home > Tools & Settings >Backup Manager > Server Repository.
At a subscription the scheduled backup works how it should.
Home > Subscriptions > example.com > Websites & Domains > Server Repository
The problem is as follows: When I set the scheduled task at a specific time example 00:00 it does not run at all. But when I just do "Create a backup" it does work...
I've done [URL] .... and everything in here is configured how it should be.
This is my configuration for scheduled task:
Cronjob is placed in : /etc/cron.d/plesk-backup-manager-task
Also did run: rpm -q --scripts psa-backup-manager | sed 1d | sh
This problem is only in the global backup configuration.
i have setup fresh Centos 6.5 with Plesk Pannel 12.0.18. When i execute the attached command from the console, i get it work, some posts are auto created within wordpress. When i enter the attached command within Plesk (Tools / Settings - Taskmanager - root New Task, the command is not executed...
/usr/bin/wget --post-data='id=4&minposts=1&maxposts=3' -O /dev/null http://www.mydomain.com/wp/wp-content/plugins/WPRobot3/cron.php?code=UNIQUEID
I tried also without /usr/bin at the beginning, but its not working with cron automatic
I'm problem with crone sender email. I changed the version of the panel from 11.5 to 12. After start the corne and sehedule task in one of users I recived email. The crone task starts from email.
For this example, I replaced the user name in Plesk Panel, which is assigned cron jobs on “support”.
This is the mail system at host servername.domainname.
I'm sorry to have to inform you that message could not be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can delete your own text from the attached returned message.
The mail system
<-f@domainname> (expanded from <-f>): bad address syntax
<support@domainname>: Host or domain name not found. Name service
error for name=support.domainnametype=AAAA: Host not found
[Code] ....
How can I configure "Backup manager" to clear checkbox "During the backup process, website visitors will be redirected to the custom error document page with the search engine friendly 503 HTTP code" for default (for subscribers, customers, etc.)
View 1 Replies View RelatedIs there any way to auto-delete all the messages in a specific mailbox on a specify domain on a daily basis? Using Postfix.
View 4 Replies View RelatedHow can I limit outgoing mail hourly or daily (per mail account) on Plesk 11 Windows? I know I can do that with MailEnable Enterprise version, but I want to know if there any other way to do that.
View 4 Replies View RelatedIn plesk9 my customers had the option to send daily usage reports by e-mail. Only certain clients like this option. Using plesk11 I cannot find this option if I log in as a client. Has this feature been removed? And if so, can the administrator enable this option only for 1 or 2 clients?
View 2 Replies View RelatedI get these emails every day, sometimes less warnings, but today there are plenty again:
Subject: Cron <root@plesk01> /opt/psa/admin/bin/php -c '/opt/psa/admin/conf/php.ini' -dauto_prepend_file=sdk.php '/opt/psa/admin/plib/modules/servershield/scripts/aggregate-stats.php'
Code:
PHP Notice: Undefined property: stdClass::$response; File: /opt/psa/admin/plib/modules/servershield/scripts/aggregate-stats.php, Line: 21
PHP Notice: Trying to get property of non-object; File: /opt/psa/admin/plib/modules/servershield/scripts/aggregate-stats.php, Line: 21
[Code] .....
They started showing up when I upgraded to Plesk 12 and activated the server shield extension. The server is an Ubuntu 12.04 LTS.
I'm using the API to dynamically create new subscriptions. However, I frequently never receive a response back for my request.
I have enabled graceful restart, which has made an improvement, but my requests still fail to return a response every now and then.
This is problematic, because the script needs to know whether the subscription has been successfully created or not. Often times, when the script times out, the subscription was successfully created. But Once and and a while that's not true, and it is causing inconsistencies in my system.
Can't download a full plesk backup.
When i'm trying to download a backup from parallels plesk to local it takes like 3 minutes then timeout.
SO CentOS 6.6 (Final)
Plesk 12.0.18
Backup size: 1.82 GB
I am using Plesk Panel 11.0.9 (latest updates applied) on CentOS 6.4. at Strato. Unfortunately I can not send email from outside of the server (thunderbird). As I am not familiar wwith mail server configuration at all I would expect that plesk panel does that for me (right?)
* I can send emails via web mail.
* I can receive emails in thunderbird, but sending runs into a timeout.
* The plesk firewall configuration does have a rule for smtp (but I don't see for which port), so I would expect it is not a firewall issue
* I would like to send with some security (starttls and encrypted password), but sending does currently also not work with any combination of (non-)security setting.
My domain has been migrated from another provider, I added it myself via Plesk panel later. The only mail-related change I did without plesk panel was to copy the mailboxes from my old server to /var/qmail/mailnames. But this should not effect sending email...
PRODUCT, VERSION, VERSION OF MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Windows Web Server 2008 SP2 + Plesk 11.0 x86
PROBLEM DESCRIPTION
I've created an self-signing SSL-Certificate an set it up to my server-ip. Then, I got kicked from the server and now, on every site hosted on the server, even the Plesk Panel(https://xxxxxx:8443 is not reacheable. Server-Timeout.
One of the pages is this one: [URL] ....
STEPS TO REPRODUCE
Created self-signing Certificate, only filled in my full Name, Country and Domain.
Got kicked from the server, and now I have no possibility to access my server.
ACTUAL RESULT
Nothing.
Got File Access with a recovery system, but this isn't really working.
EXPECTED RESULT
A working Plesk Panel would be nice.
I have a problem with an account. The client connects and starts getting his mails, like this:
Jul 14 07:39:04 host courier-pop3d: LOGIN, user=*****@*****.com, ip=[::ffff:*.*.*.152], port=[*]Click to expand...
I'm new to Parallels Panel. I use version 11.0.9. I want to backup mysql database daily. First of all, what is the best way for daily database backup in plesk. I'm trying to do this in Scheduled Tasks and I use mysqldump command although I'm not sure.
I chose the time and day first and then I switched on the task. I typed the following command to Command line.
mysqldump -uusername -ppassword databasename | gzip -9 >/httpdocs/mydatabase.sql.gz
or
mysqldump -uusername -ppassword databasename >/httpdocs/mydatabase.sql.gz
This created only a blank file. When I use this without gzip, nothing changes.
1- Is mysqldump right command for database backup?
2- Should I define full path for mysqldump, gzip and database? If so, how can I find out the full path of mysqldump, gzip and my database? Because I can't see their locations in panel.
3- I can't see any error message. There is not any log file in httpdocs folder. Where does the log file exist?
4- It is weird but should the username be "database user" or should I write "root" ?
at my logs, i can see this timeout error caused my mod_security at my rhes 4 server.
Code:
mod_security-message: Access denied with code 403. Error reading request body, error code 70007: The timeout specified has expired [severity "EMERGENCY"]
I didnt specify any mod sec rule about "timeout", what timeout is this about?
When I start the process in Migration & Transfer Manager i have this error: Error: Connection timeout. I see in the log file:
[2015-07-08 19:39:55.977|22820] INFO: Launchpad started : /usr/local/psa/admin/bin/launchpad --send-scout --host=... ... .... --port=22 --login=root --session-path=/usr/local/psa/PMM/msessions....
[2015-07-08 19:39:56.021|22820] DEBG: Connecting to ....:22
[2015-07-08 19:39:56.021|22820] DEBG: Resolving ..... .....
[2015-07-08 19:42:03.344|22820] ERR : Unable to open socket to ......:22: Connection timed out
[2015-07-08 19:42:03.398|22820] INFO: ConnectionTimedOut[....]: Timeout while attempting connection to host ........ [./../commons/socket.h:65]
plesk::Socket::Socket(const string&, short unsigned int)
[2015-07-08 19:42:03.399|22820] INFO: Launchpad finished. Exit code: 12
In two servers the configuration is identical: CENTOS 7 and PLESK 12
I am running Plesk Version: 12.0.18 on CentOS.Earlier today my service provider had a massive issue and my server was down for several hours. Upon it being back online i've restarted but now I cannot load any of my pages. I have 10 domains setup and if I ping their name servers or the server IP i get packets received now.
One of my installed domains is [URL] ... now if you try and load this url you get a time out but if you try to access admin page URL....None of the subscriptions are able to load their websites when i type in their URL and well it worked before it went down.
I'm having this issue when trying to set automatic backups to a separate server:
Cannot export dump file 'Friday_02_05_14_info_1405020913.xml' to 'ftp://Scott@00.000.000.00/Backup/'
[Transport error: unable to send directory to repository: Transport error: unable to put local file D:PleskPrivateTemp/repo_transport_tmp_01cf65e52b9bf130friday_02_05_14_1405020913.zip to friday_02_05_14_1405020913.zip: Curl error: Timeout was reached]Click to expand...
As I read, when Plesk and WHMCS are in the same server, you may have 502 bad gateway errors when creating an account through WHMCS..Page not Found/Timeout/502 Bad Gateway error creating accounts with Plesk 10+..By default Plesk 10 and above performs a forced restart of apache when an account is created or suspended which causes WHMCS to lose connection to the server, and if your WHMCS is on the same server, you will also lose connection to WHMCS at the same time.
In order to resolve this please refer to the following knowledgebase article for instructions on configuring Plesk to perform a graceful restart instead: URL..
But when I activate nginx in Plesk the 502 bad Gateway problem comes back.Is there an option to activate Nginx graceful restart in Plesk?