The Timeout SpeciMod_sec: The Timeout Specified Has Expired [severity "EMERGENCY"]
at my logs, i can see this timeout error caused my mod_security at my rhes 4 server.
Code:
mod_security-message: Access denied with code 403. Error reading request body, error code 70007: The timeout specified has expired [severity "EMERGENCY"]
I didnt specify any mod sec rule about "timeout", what timeout is this about?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Does Cron Timeout?
Simply wondering, does cron timeout? I have heard mixed reports and can't find any good info. Personally i've run a cronjob for up to 6 minutes, but as my best method was sending myself emails through php, its not exactly a highly accurate testing method. On the same note, what would happen if one cronjob is running a php script for over 10 minutes, then another cron job starts on the same script, before the first one has finished?
View Replies!
View Related
Vps Timeout
I got my VPS a few days ago and want to get started. I installed Webmin (with the rpm - centos 5), and it says it installed successfully and then I can login. I typed in my domain name with the ':10000' but I get a network timeout in Firefox. I know my DNS is right, because I have the domain name pointed to my IP address with an A record. SSH is working fine, I can login using the domain name and not my IP address. I tried installing Lighttpd, but still get the timeout. Replacing the domain name with the VPS IP address doesn't work either.
View Replies!
View Related
SSH Timeout
Is there a way to increase the timeout for a SSH connection when idle? Mine (on my server) seems to time out after 15-20 mins of inactivity. I'd like to increase this to like 60 mins or indefinitely.
View Replies!
View Related
CGI Timeout
When i try to login my forum after waiting alittle following error occured Code: CGI Timeout The specified CGI application exceeded the allowed time for processing. The server has deleted the process
View Replies!
View Related
Connection Timeout On SSH
where I can't access my terminal because my connections keep getting timed out. Its been ok previously but for the last 2 days I could not connect because the connection timed out 9/10 times. No modifications were made during this time so whats the problem guys?
View Replies!
View Related
VPS - Connection Timeout
I have a problem with my VPS. Hosting company have migrated my vps to a new and better dedicated server and now on all my sites(and IP) I got connection timeout error. I have changed "Main IP" and resolvers in HyperVM 10 minutes ago and it's not working(or I have to wait to wait like for nameservers registration?). I can ping my IP and all services(lxadmin,lighttpd etc are started successfully and its not wotking, I still getting connection timeout error.
View Replies!
View Related
Unique Apache Timeout
I have a new website that has a similar feature to tripadvisor's Reviews, where users share detailed thoughts and experiences. They fill in all this information on one form so there is no interaction with the system while they are writing. I know Apache has the TimOut setting which is set to 5 minutes by default. This ensures that you do not have users using active memory and sessions for a long period of time. But the problem I have seen is that some users are spending 15-20 minutes writing very detailed experiences and when they hit the submit button obviously their session has timed out and they lose everything and get a system error. I really don't want to change the TimeOut value in Apache to 20 min due to resource constraints, but is this my only option?
View Replies!
View Related
Scripts Timeout After 60 Sec
I have a phpbb3 forum that I post sound clips for my members to download and I had a few of them tell me that sometimes the downloads truncate. I asked my host what the deal is and they told me that their scripts time out after 60 seconds and that there was no way to make it longer. I have never heard of this before and I want to know, is that normal or standard for hosting companies? It seems weird that they would host a message board that allows attachments and their service doesn't allow enough time for people with dialup or slower connections to download files in their entirety.
View Replies!
View Related
HTTP Keapalive Timeout
I'm trying to solve an issue with certain customers timing out. In regards to the "http KeepAlive timeout" value.... When this timer expires, does the webserver have the tcp stack send a FIN? IF so, does it actually do it like at six or seven seconds? It's actually IBM IHS in this case.
View Replies!
View Related
Why Getting Session Timeout Error In IE
I am assisting a client who is linking to an online calculator, he is putting a frame on top of the calculator page, so people will still see his information. However, for some reason he is getting a Session Timeout Error in IE. I don't get this error in Firefox using this method, or ever going to the direct page in IE. Let me give a better explanation: If you visit: [url] Just put in a fake name and email, it loads a frame at top, and then the online calculator, which is this page: [url] Why I am getting a Session Timeout? Is there a better solution. I never get the same error if I go directly too: [url] We want a frame or better solution because we still want the contact information to be in front of the consumer. Does this maybe have to do with a cookie and frame?
View Replies!
View Related
Timeout- After Working For Awhile
I've been experiencing some annoying issues recently, trying to troubleshoot whether it's actually my server or my ISP - Using a HostGator standard box, php 5.2.3, optimized based on scribby's tutorial. Basically I'll be editing my website for about 10-15 minutes, going through the admin panel and uploading files from it several times. Suddenly it will begin timing out for about 1 min or so and then it will run very sluggish/slow unless I let it "cool down" for a bit and try again later. I ran "ping -t mysite.com" while editing the site and during the timeouts and there was no packet loss. I can access other sites on the server and WHM from the IP at normal speeds during the timeouts, and other people can access the affected site fine.
View Replies!
View Related
MySQL Timeout On Active Connections
unfortunately my server crashes a lot recently. What happens is that some application creates a MySQL connection which hangs and then MySQL gets overloaded and takes the whole server down. My question: 1. How do I configure MySQL to time out even on active connections ? I.e. after 30 seconds kill the process no matter if it is still active or not. Is that possible ? 2. How do I exclude the root user from that?
View Replies!
View Related
Server.lu Having Frequently Ping Timeout
globichen can explain about this. ping timeout happen frequently. this is the 2nd time happen in a week i've submit a ticket regarding about this customer service replies with server is online. i'm not bashing their service but frequently ping timeout really makes my business down lately. Loading website takes a few min & even couldn't access to server due to ping timeout.
View Replies!
View Related
Cpanel :: Timeout While Trying To Get Data From Service
I am facing some strange problems with one of my cPanel/WHM server. It's a dedicated server with Quad Core processor and 4gb ram. First i thought it was a ddos attack but now i think it's not. I am keep getting ftpd failed emails every 5-10 mins. ftpd failed @ Mon Jul 7 06:07:21 2008. A restart was attempted automagically. Failure Reason: Timeout while trying to get data from service server is extremely slow and load is over 10 for last 2 days. it shows that httpd, mysql, ftp is up but none of our site's are loading. 1 thing i noticed when i logged into WHM is that it says WHM VPS Optimized. Attachment 13075 I tried updating cPanel but same problems. SSH Top: .......
View Replies!
View Related
Timeout Error Starting MySQL
I'm having a bit of trouble here with MySQL, I don't know what to do. Centos 4.3, Mysql 4.1 Data is stored in /var/lib/mysql/ I'm looking to move that information to a second hard drive soon, and did a quick test of just copying it to another place on my existing drive. It won't start. Quote: [root@localhost ~]# service mysqld start Timeout error occurred trying to start MySQL Daemon. Starting MySQL: [FAILED] Error logs Code: 071106 12:14:33 mysqld started 071106 12:14:33 [Warning] Can't create test file /var/lib/mysqltf/localhost.lower-test /usr/libexec/mysqld: Can't change dir to '/var/lib/mysqltf/' (Errcode: 13) 071106 12:14:33 [ERROR] Aborting 071106 12:14:33 [Note] /usr/libexec/mysqld: Shutdown complete 071106 12:14:33 mysqld ended 071106 12:17:00 mysqld started 071106 12:17:00 [Warning] Can't create test file /var/lib/mysqltf/localhost.lower-test /usr/libexec/mysqld: Can't change dir to '/var/lib/mysqltf/' (Errcode: 13) 071106 12:17:00 [ERROR] Aborting 071106 12:17:00 [Note] /usr/libexec/mysqld: Shutdown complete 071106 12:17:00 mysqld ended I have tried even chmod 777ing the msyqltf folder (my copy) to no avail. my.cnf Code: [mysqld] datadir=/var/lib/mysqltf/ socket=/var/lib/mysqltf/mysql.sock # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 [mysql.server] user=mysql basedir=/var/lib [mysqld_safe] err-log=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I've tried moving it to different locations. I even tried moving the original folder and renaming it, and still get this problem.
View Replies!
View Related
CSF Causing Server Ping Timeout
I just installed a fresh new server with CSF Soon I find out that my ping keeps dropping. The server was smoothly running, SSH is smooth, Website are loading fine, except I cannot ping my server. I disable SELINUX completely and it still doesn't help. When I disable CSF, my server ping are responding back! So I remove CSF installation and reinstall CSF, the same problem appear How can I solve this issue? My kernel is 2.6.18-92.1.6.el5PAE running on latest version of cPanel on CentOS 5.1
View Replies!
View Related
Ping Timeout On IPs Used For IP Based Sites
For some reason, my IPs that we use for a IP based site are un-pinable (ping time out) after some time. However, when I restart apf (firewall) the ip are back again and are pinable again. We added the IPs for the IP based site over the ensim panel. I belive its a Firewall issue, does anyone know how to check why the Ips are always getting un-pinable?
View Replies!
View Related
Some Websites Load Slow + Mysql Timeout
I'm hosting about 6 private websites on my server, and some have problems. My biggest website is a vb forum with 30.000 members and 1.5 million posts. When i browse with firefox i see that vb forum loads fast, but phpads which is integrated on the top and footer loads very slow. When i browse with IE, it takes like 10 seconds before the whole site is loaded and sometimes IE even crashes. When i try to login on another website / admin panel (oscommerce), i get a mysql gone away error, that means timeout. But why does it show that? I ran mysqlreport and can't find anything why it should display mysql gone away. # ./mysqlreport MySQL 5.0.15-standard uptime 3 19:36:47 Mon Feb 5 11:08:10 2007 __ Key _________________________________________________________________ Buffer usage 78.94M of 96.00M %Used: 82.23 Write ratio 0.60 Read ratio 0.00 __ Questions ___________________________________________________________ Total 19.61M 59.47/s Slow 9 0.00/s %Total: 0.00 %DMS: 0.00 DMS 7.17M 21.74/s 36.56 __ Table Locks _________________________________________________________ Waited 7.57k 0.02/s %Total: 0.05 Immediate 16.50M 50.03/s __ Tables ______________________________________________________________ Open 1.27k of 1800 %Cache: 70.56 Opened 1.82k 0.01/s __ Connections _________________________________________________________ Max used 47 of 500 %Max: 9.40 Total 2.62M 7.95/s __ Created Temp ________________________________________________________ Disk table 6.77k 0.02/s Table 635.25k 1.93/s File 50.37k 0.15/s I can't find any problems on the server which may lead to this strange problem. The server load is normal, around 1 to 1.5. No weird errors in the apache error log or system log. This strange behaviour started 2 weeks ago, and appears 2 to 3 time a week. The system is running: centos 4.3 64-bit kernel 2.6.16.17 #1 SMP directadmin 1.29.0 mysql 5.0.15 php 5.2 apache 2 Zend optimizer 3.2.0 Eaccelerator 1.95 One thing i noticed is that every night when the directadmin cron finished, the server acts normal again. The directadmin cronjobs are: * * * * * root /usr/local/directadmin/dataskq 2 0-23/6 * * * root echo 'action=vacation&value=all' >> /usr/local/directadmin/data/task.queue; #5 5 * * 0 root /sbin/quotaoff -a; /sbin/quotacheck -augm; /sbin/quotaon -a; 20 4 1 * * root echo 'action=reset&value=all' >> /usr/local/directadmin/data/task.queue 0 4 * * * root echo 'action=check&value=license' >> /usr/local/directadmin/data/task.queue 10 0 * * * root /usr/local/directadmin/plugins/awstats/hooks/cgi-bin/awstats_updateall.pl now -awstatsprog=/usr/local/directadmin/plugins/awstats/hooks/cgi-bin/awstats.pl && echo 'action=tally&value=all' >> /usr/local/directadmin/data/task.queue
View Replies!
View Related
Proftpd Timeout Connection Attempt Failed
Currently having a problem with proftpd on my centos plesk 8.1 server. During large uploads, lets say around 10 MB the FTP connection fails within 5 minutes or so saying: "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond." I have asked for help from my server provider but they have tried and are now unable to help. I currently have the APF firewall in my server. Has anyone experienced this? Below is the APF config file that i currently have & the proftpd config files that i have, if anyone can help it would be really really appreciated APF CONFIG: Code: #!/bin/sh # # APF 0.9.6 [apf@r-fx.org] # # NOTE: This file should be edited with word/line wrapping off, # if your using pico please start it with the -w switch # (e.g: pico -w filename) # ## # [Devel Mode] # !!! Do not leave set to (1) !!! # When set to enabled; 5 minute cronjob is set to stop the firewall. Set # this mode off (0) when firewall determined to be operating as desired. ## # Set firewall cronjob (devel mode) # 1 = enabled / 0 = disabled DEVEL_MODE="0" ## # [Main] ## # The installation path of APF; this can be changed but it has not # been tested what would happen. INSTALL_PATH="/etc/apf" # Untrusted Network interface(s); all traffic on defined interface will be # subject to all firewall rules. This should be your internet exposed # interfaces. Only one interface is accepted for each value. # NOTE: The interfacing structure is being worked towards support of MASQ/NAT IFACE_IN="eth0" IFACE_OUT="eth0" # Trusted Network interface(s); all traffic on defined interface(s) will by-pass # ALL firewall rules, format is white space or comma seperated list. IFACE_TRUSTED="" # Enable virtual network subsystem; creats independent policy ruleset for each # ip on a system (pulls data from 'ip addr list') to /etc/apf/vnet/ip.rules # Template is located in the vnet/ folder for rule files. This feature can # reduce apf start/stop performance and is not recommend for systems with more # than 255 (/24) ip's. [0 = Disabled / 1 = Enabled] SET_VNET="0" # Support Monolithic kernel builds [no LKM's]. This mode of operation is # not really supported and you use at your own risk. SET_MONOKERN="0" # Verifies that all inbound traffic is sourced from a defined local gateway MAC # address. All other traffic that does not match this source MAC address will be # rejected as untrusted traffic. It is quite trivial to forge a MAC address and as # such this feature executes NO default accept policy against this MAC address. VF_LGATE="" # Verifies that the IF and IFACE_TRUSTED interfaces are actually routed (/sbin/route) # to something. If not then chances are APF will not start properly if at all. VF_ROUTE="1" # Verifies that crond service is running when DEVEL_MODE=1; if not then APF will not # try to load as if lock-up occures no cron service to flush firewall VF_CROND="1" # Verifies that the current system uptime is greater than this value before APF # can activate. This is to prevent on-boot lockup issues or delays due to excessive # amount of firewall rules. Value is in seconds; should you wish to disable this # feature, simply set VF_UTIME to 0 value. !! NOTE: APF WILL NOT START ON IT's OWN; # IT WILL EXIT WITH FATAL ERROR BELOW SET UPTIME !! VF_UTIME="0" ## # [Packet Filtering/Handling] ## # How to handle TCP packet filtering? # # RESET (sends a tcp-reset; TCP/IP default) # DROP (drop the packet; stealth ?) # REJECT (reject the packet) TCP_STOP="DROP" # How to handle UDP packet filtering? # # RESET (sends a icmp-port-unreachable; TCP/IP default) # DROP (drop the packet; stealth ?) # REJECT (reject the packet) # PROHIBIT (send an icmp-host-prohibited) UDP_STOP="DROP" # How to handle all other packet filtering? (icmp,arp,igmp) # # DROP (drop the packet) # REJECT (reject the packet) DSTOP="DROP" # The sanity options control the way packets are scrutinized as # they flow through the firewall. The main PKT_SANITY option is a # top level toggle for all SANITY options and provides general # packet flag sanity as a pre-scrub for the other sanity options PKT_SANITY="1" # Block any packets that do not conform as VALID; this feature # is safe for most but some may experience protocol issues with # broken remote clients PKT_SANITY_INV="0"
View Replies!
View Related
DNS Lookup Timeout From Googlebot Indexing Webpages
One of my customers uses Webmasters Tools from google , looking at what pages he have indexed by Googlebot, found that 180 pages are giving a "DNS lookup timeout" error, tried searching for help on google and the only thing that i found is " We received a timeout on DNS lookup." DNS are ok, same as the zone file, everything is responding OK, I dont know what can be the issue.. ? any ideas ? Im using Ensim Pro and RHES 4.
View Replies!
View Related
FastCGI :: Aborted: (first Read) Idle Timeout (30 Sec)
I've got a server with FastCGI that at random produces 500 internal server errors. In the specific account the errors are as follows in the error_log: [Wed May 21 12:01:29 2008] [error] [client 1.2.3.4] FastCGI: comm with (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" aborted: (first read) idle timeout (30 sec) [Wed May 21 12:01:29 2008] [error] [client 1.2.3.4] FastCGI: incomplete headers (0 bytes) received from server "/usr/local/apache2/htdocs/user/php-wrapper" As you can see this unfortunately does not tell me anything. Now viewing the apache error_log I see this Code: [Wed May 21 12:51:11 2008] [warn] FastCGI: scheduled the restart of the last (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" process: reached dynamicMaxClassProcs (10) [Wed May 21 12:51:11 2008] [warn] FastCGI: (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" (uid 514, gid 515) restarted (pid 20510) [Wed May 21 12:52:00 2008] [warn] FastCGI: (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" (pid 20510) termination signaled [Wed May 21 12:52:00 2008] [warn] FastCGI: (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" (pid 20510) terminated by calling exit with status '0' [Wed May 21 12:57:02 2008] [warn] FastCGI: (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" (pid 20501) termination signaled [Wed May 21 12:57:02 2008] [warn] FastCGI: (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" (pid 20501) terminated by calling exit with status '0' [Wed May 21 13:02:03 2008] [warn] FastCGI: (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" (pid 20491) termination signaled [Wed May 21 13:02:03 2008] [warn] FastCGI: (dynamic) server "/usr/local/apache2/htdocs/user/php-wrapper" (pid 20491) terminated by calling exit with status '0' All warnings so I'm assuming these don't mean anything. Here's the php-wrapper: Code: #!/bin/sh PHPRC=/usr/local/lib export PHPRC PHP_FCGI_CHILDREN=8 export PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=500 export PHP_FCGI_MAX_REQUESTS exec /usr/local/bin/php-cgi Not a particularly well setup system for users and such but it worked for the user. The software versions are as follows: Apache 2.2.8 with Suexec on the FCGI FastCGI (Latest stable and also tried a CVS version) PHP 5.2.6 64 bit system how to go about debugging this?
View Replies!
View Related
Timeout Error Occured Trying To Start MySQL Daemon
I am getting the error (as listed in the title) on my server. This is a BRAND NEW FRESH install on a brand new server... OS: Unix Fedora Kernel Version: Kernel 2.6.18-1/2798.fc6 on an i686 Hardware Information: Brand new Dell SC1435 Server Software Version: MySQl 5 Control Panel: Nothing yet Apache starts ok but when I go to strart MySQL I get the following error... [root@server112]# /etc/rc.d/init.d/mysqld start Timeout error occurred trying to start MySQL Daemon Starting MySQL: [FAILED] Does anyone have any ideas? I did some pretty extensive searching... Web Hosting Talk article that basically describes the same error. I followed everything as listed in his suggestion and it didn't change anything. Also Checked here but this didn't work either.
View Replies!
View Related
VPN Timeout Issues - Cisco & Watchguard
I have 2 locations, one with a Watchguard Firebox II/1000 and the other with a Cisco ASA 5520. I have configured a VPN between them and have run into a snag. The VPN tunnel works fine until it expires, but there is a significant lag in re-establishing the tunnel. The lag is enough to cause Backup and Data transfer failures due to timeouts. Does anyone know how to configure the VPN tunnel to never expire, regardless of uptime or traffic volume? The Cisco doesn't seem to want to let me configure either phase for 0 or infinate kb expiration.
View Replies!
View Related
CGI Timeout Error [php_curl.dll Not Found]
PHP pages on my server are not responding. Following message appears in Logs: Unknown(): Unable to load dynamic library 'c:program filesswsoftpleskadditionalphpextensionsphp_curl.dll' The specific module could not be found. Plesk 7.5.6 Control Panel PHP 4.3 is installed on server. It was working perfect till last night. How can I fix this, any advice? The php_curl.dll is available in above location and have correct permissions.
View Replies!
View Related
Sending Email Cpanel :: SMTP Command Timeout On Connection
i have this weird problem of emails not gettign delivered and i am hosting with theplanet. Every email is sitting on the queue and not delivered. i checked with dnsreport and it says Timed out [Last data sent: [Did not connect]] and my exim_mainlog shows R=dk_lookuphost defer (-1): host lookup did not complete 2008-06-03 04:49:59 SMTP command timeout on connection i have restarted exim, checked firewall and still i am unable to fix my problem! update: i again checked with dnsreport and my nameservers are failing NS FAIL NS A timeout occurred getting the NS records from your nameservers! None of your nameservers responded fast enough. They are probably down or unreachable. I can't continue since your nameservers aren't responding. If you have a Watchguard Firebox, it's due to a bug in their DNS Proxy, which must be disabled (31 Jul 2006 UPDATE: several years after being informed of this, there is a rumor that there is a fix that allows the Watchguard DNS proxy to work).
View Replies!
View Related
ProFTPD: 421 No Transfer Timeout (300 Seconds): Closing Control Connection
Since moving servers I've been plagued by constant disconnects whilst using FTP: 421 No transfer timeout (300 seconds): closing control connection I've gone through Proftpd's forum and documentation numerous times to try and find a solution to this but have been unsuccessful so far. Within proftpd's config file it's set at: TimeoutLogin 120 TimeoutIdle 3600 TimeoutNoTransfer 3600 TimeoutStalled 3600 So I am unsure where it is getting the "300 seconds" from. Even though the error states 300 seconds, this problem happens way before 300 seconds every time and has happened during the transfer of files (when the connection has been active and in use). I've tried 3 different FTP clients and used the "Keep Alive" option in each and it has absolutely no effect. I am unsure if APF is causing the problem, I can't see any problems in any of the server logs in relation to ftp.
View Replies!
View Related
APC :: Shows "timeout" And "out Of Memory" Errors With Php Scripts
We have installed APC 3.1.3p1 beta (and also 3.0.19 stable seperately, to test) and we are seeing a lot of "out of memory" and "timeout" errors. For example, a php scripts dies saying the available memory is 256Kbytes, and the script tries to allocate 256 Mbytes of memory. Here are the APC settings: [APC] apc.enabled = 1 apc.shm_segments = 1 apc.shm_size = 128 apc.max_file_size = 8M apc.stat = 1 and PHP settings related to memory is memory_limit = 1024M We have tried included apc.php file to watch out the cache, but it doesn't show any kind of fragmantation or etc. related with system, instead it shows "timeout" and "out of memory" errors with php scripts. We have thought that the error can be related to /dev/shm as you should increase apc.shm_size in order to obtain more memory, therefore we have mounted /dev/shm as 4Gbytes. The server has 8Gbytes of memory (using 64-bit CentOS). Note that once we set apc.enabled = 0, the problems go away, so it's definitely something with APC.
View Replies!
View Related
Brand New Spam Attacks - Seems Like An Emergency
This afternoon I noticed a pattern of spam on several different shared hosting servers, spanning several different shared hosting providers. The spam first takes the client's domain name, for example, plastic.com. Then adds the word "nac" to the beginning, and "gaf" to the end, making the from email address nacplasticgaf@plastic.com . If the domain were rockin.com, the email would be nacrockingaf@rockin.com . Byob.com, nacbyobgaf@byob.com, etc. It then grabs the ip address of the website, and creates a fake header which makes the email appear to have been sent from that server. Could some of you run this command on your servers, and let me know if anything turns up? Thanks. grep nac /var/log/exim_mainlog | grep gaf You could help us out by running this command: grep nac /var/log/exim_mainlog | grep gaf > /usr/local/apache/htdocs/nacgaf.txt then send us a link to [url] These commands only work on cpanel machines. You'll have to manipulate the path in the commands to the logs that your MTA keeps.
View Replies!
View Related
Expired Domain
domain has expired with no way of getting hold of the admin details to renew. So he can't afford to waste the time it'll take for the domain to come up for purchase (8-12 weeks I gather!). He's registered a new domain and was wondering if there's a generic way of associating the new domain on the server. He uses awardspace and it says 'DNS update should be completed to have your domain working' and doesn't seem to offer many options (like maybe adding a domain alias?). I built it for him using expression engine and it's linked to the database so it would be a real pain to have to set it all up again.
View Replies!
View Related
MX Record Domain Has Expired
I have a site mydomain-name.com that is running and the mail server for it was mail.mydomain-name.org However the mydomain-name.org has expired and I don't want to renew it. I just want to use the .com domain and have the mail use mail.mydomain-name.com So i created the MX records for the .com domain .. Now my question is do i have to also contact my registar for the domain and ask them to update their records so that now it points to the new MX? I am really new at this stuff so please bare with me.. when i do an nslookup in DOS it still shows the .org as my mail server. mydomain-name.com MX preference = 10, mail exchanger = mail.mydomain-name.org Is this something that needs to be changed at the registrar level?
View Replies!
View Related
Can Awstats Be Viewed For Expired Domain
can awstats be viewed for an expired domain? one of my domain expired week ago, I have it still under my control panel though, I didn't renew it neither have plans to renew is it possible for me to still look at the awstats? as the awstats link stand as: [url] and when I use the ip address for the site it doesn't show up anything, probably it could be using different sites on the same ip so do I have stand a chance to view awstats still ?? if yes how?
View Replies!
View Related
SSL Certificate Inside Cpanel Expired
I connect to my email on my dedicated cpanel/whm server by TLS/SSL (similar to instructions here: [url]..same ports, etc.) Today I login & get a "This server's certificate expired" But it didn't. I purchased a NEW one June 1st. Why is thunderbird grabbing my old ssl cert? The website's https:// works perfectly. I also checked the server ssl self-signed certs and all are up to date.
View Replies!
View Related
Enom Is Using Porn Links And Sex Keywords On The Expired Domain Pages!!
Has anyone else had this happen with Enom? My clients domain expired a couple days ago and his page now has links with the following keywords: C*nt Hairy P*ssy Fat *ss Big T*t Round *ss Monster D*ck Big *ss T*t I called Enom, and they're only response was, "Well why did you let that domain expire?" I then asked for a supervisor and was told that one was not available. Looks like its time to find a new domain reseller.
View Replies!
View Related
|
TRACKER
