I am working on a new install of PPA, and after installation on the management node Im trying to add the other nodes. Ive tried to add a Apache, Postfix, DNS & DB node, and they all have the same issue. The installation task fails with the following error:
Destination host 'node.domain.com' (#3), IP '192.168.1.*' : The operation can not be completed because the following component is missing or is not running: pleskd (sc_name '', sc_id #45)
(domain and IP are removed here, correct in the original error. The IP is a backchannel IP, and the public IP was properly set in the management node).
I've verified that pleskd was installed and is running on each node:
Code:
24710 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal
24712 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal
24714 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal
...
I've verified that my management node can connect to the nodes in question via 8532:
Code:
]# telnet 192.168.1.* 8352
Trying 192.168.1.*..
Connected to 192.168.1.*.
Escape character is '^]'.
^]
telnet> quit
Connection closed.
So there shouldn't be any firewall or other networking issues.
I'm testing PPA and have now a questions. How can restrict a subscription to a service node? I have try that over the subscriptions and custom atribute's. That work for the most thinks (Apache/Postfix) but not for MySQL, all customers can by a create to choose the database server (all database servers). How can i customer don't allow to choose the database server?
For a example (web1, mail1 only -> db1) (web2, mail2 only -> db2)
And for the DNS settings to create automaticly a DNS for the database service? (as a sample: db.domain.de -> database service node)....
I can't seem to find if there is a way to specify what hostname is used for a service on a service node. For instance, if one creates a service node named web01, and makes it a DNS service node, is web01 what will be used when creating NS records in zone files, or is there a way to change that?
The ppademo.com site is offline (and was unlicensed again last week).
after learning that server aliases are not available for PPA, we are needing to rename our service nodes. We have looked through the documentation, and did see the ppa.hostname command for the management node but there does not seem to be an equivalent for service nodes.
I'm attempting to run PPA on Azure but I only have one IP to work with, the public IP address. It's not possible to communicate between servers using the internal IP addresses as they are not necessarily on the same sub net. How can I get PPA and service nodes running on a single IP address per machine?
An example of the error I get when setting up a service node is
Failed to execute command 'cscript /Nologo http_download.js http://<private ip address>/tarballs/Win32Bin/support.cab'. Check logs in 'c:POA_Deploy' at host '<public ip address>' for more details about the reasons of failure.
Plesk Panel > Updates and Upgrades > Install "Plesk VPN extension" Green Message "All operations with products and components have been successfully completed." Going back from Upgrade window to Plesk Panel Home
[Code] .....
What I already have tried: Shell > apt-get install psa-vpn
Getting error mossage:
Setting up psa-vpn (12.0.18-debian7.0.build1200140606.15) ... ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
Shell > modprobe tun ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
We deployed a subscription (through PBAS), and realised afterwards that the database resource was missing.
This has now been added and the subscription synchronised.
However, the MySQL system is still not available on the subscription. How can we enable the MySQL (or indeed any added resource) after the subscription has been deployed.
I saw for Webspace you can add additional webspace, is there a similar feature for the Databases?
I have some problems adding a database and a webserver service-node:
Mar 19 13:44:13 plesk-db : DBG [SYSTEM 4:6600:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'. Mar 19 13:45:50 plesk-www : DBG [SYSTEM 3:9054:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'.
We have tried to add branding to our Plesk Automation install but are not having any luck.
When trying to access the branded domain it tries to redirect to https://branded-domain.com but the page fails to load, looks as though the control panel is not listening on port 443.
Even trying to access https://ip-address of CP fails but https://ip-address:8443 works fine.
If I try to telnet to the CP ip:443 it fails to connect.
On a new install, if I create IPv4 and IPv6 pools (one of each enabled for branding), and create a brand using "IP address"="Shared IPv4 and dedicated IPv6", it fails without an onscreen error. A webspace is created but marked "No hosting" in PPA and Failed in Hosting Panel. A DNS zone is created. At that point I can't delete the webspace from Hosting Panel and there doesn't seem to be a way to delete it from PPA, however, I can delete the DNS zone.
This is in poa.log, not sure if it's relevant: Mar 26 09:19:20 ppa: ERR [UI:ecc45799:1427379560608 1:18157:b25ffb70 lib]: [Facade:leskResponse:arse] Plesk error 1013 Mar 26 09:19:22 ppa: ERR [openapi-firewall:b09ffb70 1:18032:b09ffb70 lib]: [iqxmlrpc-server] Server: Server error. Method 'system.methodSignature' not found.
Also after the DNS zone is created, the below is logged in poa.log...it doesn't seem relevant to the branding error but does seem to be a problem...
Mar 26 09:28:27 ppa: ERR [task:181:1932 1:18142:b33ffb70 lib]: [task:181 InteractiveHostOps:erform] ExSystem: module_id:'Common', ex_type_id:'1',Message:'Destination host 'ppa.example.net' (#1), IP '99.99.99.99' : Internal error: /usr/sbin/rndc /usr/sbin/rndc reconfig failed with code 1 saying: STDOUT: '' STDERR 'WARNING: key file (/etc/rndc.key) exists, but using default configuration file (/etc/rndc.conf) rndc: connection to remote host closed
Somehow when customers add a new MySQL database they can select a Local MySQL server. It turns out this is the MySQL instance running on the CP server, can I somehow hide this server from the list?
on a fresh installation of Ubuntu (at first 14.04 but on 12.04 the same problem occurs) I installed Plesk via the autoinstaller. It seems to be all fine except I cannot open Plesk in the browser.
The web browser shows "502 Bad Gateway", a look into the error_log at "/var/log/plesk/sw-cp-server" shows the following error:
Code: 2014/08/11 09:37:22 [crit] 4988#0: *4 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxx.xxx.xxx.xxx:8443" So the problem seems to be the sw-engine service that cannot be started. If I try to start it manually with `/etc/init.d/sw-engine start` it just fails:
Code: * Starting Plesk engine pool manager sw-engine-fpm [fail]
Where to find any startup error log for sw-engine, where I could find any further information.
Getting the following when trying to install DNN. A similar thing also happened when trying to install WordPress.
Error: Installation of DotNetNuke at http://domain.com/dnn failed. Non-zero exit status returned by script. Output stream: 'Error during MSSQL version checking [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. '. Error stream: 'Error during MSSQL version checking [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. '.
When it happened with WordPress, I tried the install again and it worked the second time. However, with DNN it does not seem to be working after a second try. Yes, the MS SQL server does exist and is ready to provide.
Starting point: a working site using a shared IPv4, dedicated IPv6, and SSL. HTTP and HTTPS work, the latter only using SNI of course.
The good news: If I simply allocate an IP resource of 1 to a subscription it is pulled from the pool, assigned to the service node, assigned to the web site, DNS is updated, and the site is automatically changed to using a Dedicated IPv4 and Dedicated IPv6.
The bad news: visitors land on the default web site of the service node, with the default SSL certificate.
Other info: I can't ping the new IP, even though it shows in "ip a l" and /etc/sysconfig/network-scripts/ifcfg-eth0:0. [edited]
After the IP assignment, it is still installed, and /etc/httpd/conf/plesk.conf.d/ip_default/domainname.conf shows the new certificate is being used.
However, a second set of VirtualHost entries is created in server.conf for this IP for ports 80 and 443, with NameVirtualHost enabled on the new IP. The port 443 entry uses the default certificate. Apache's setup this default VirtualHost entry will override the web site configuration because Apache is listening on port 443 with the wrong cert.
If I go to "Change webspace settings" and toggle to Shared IPv4, Dedicated IPv6 the site works again via HTTPS, and Dedicated IPv4 and Dedicated IPv6 breaks it again. Setting the SSL cert to None and back again does not work.
Setting the SSL cert to None, changing to a dedicated IP, and enabling SSL results in the server being inexplicably inaccessible...browsers no longer connect to either the default site or the correct site, and I don't see any entries in the vhosts's logs.
[LOGTEE]: Error Downloading Packages: [LOGTEE]: [LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is: 2.6.6 (r266:84292, Jan 22 2014, 09:42:36) [GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
I guess the Plesk 12 is the best version of plesk for windows since i work with plesk on version 8.
But the backup task still has a problem, now i can't backup my server using backup manager. If i create a manual task to create backup after few hours the server and plesk just get to slow to use. Only when i remove task i can use back server.
When Parallels create a backup task who's really work ?
How can i backup all my accounts of server in case of crash?
Is there a way to run an additional task after the scheduled backup has completed?I want to copy the backup off-site. I can't use FTP, otherwise I'd use the built-in 'Personal FTP Repository' feature. (See Rsync, Amazon S3, Rackspace cloud files, etc)
I could just create a new scheduled task, but the backup takes an unpredictable amount of time, and the tasks need to run sequentially. Also, the 2nd task should only run if the backup succeeds.
I could disable the backups in the control panel and create a new scheduled task that does both the backup and the additional task. But then the functionality of the control panel's Backup Manager page is lost.
an email notification for this is coming through every day. It says ended successfully so no errors...
Running task: C:Pleskadmininweb_statistics_executor.exe Started: Fri Jun 19 01:49:01 2015 Ended successfully: Fri Jun 19 01:49:09 2015
If i go to Server -> Scheduled Tasks and look for it, it cannot be found anywhere. Also scheduled tasks only shows system users, not 'Plesk Administrator' as the kb articles refer to.
