Plesk 12.x / Linux :: Ubuntu 12.04 Very Slow Especially With Android Studio
Aug 24, 2014
I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB,
I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time.
Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet.
I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change.
View 1 Replies
ADVERTISEMENT
Mar 29, 2015
I'm running Plesk 12.0.18 update 39 on Centos 6.6 with postfix and courier-IMAP
However I can't send emails from mobile devices or outlook - the security settings are invalid, I've tried all 4, SSL, SSL/TLS Accept all certs, Start TLS etc.
View 1 Replies
View Related
Mar 21, 2015
I know I'm probably doing something wrong, but I cannot get Android KitKat phones to authenticate via IMAP to my Plesk 12 server (straight out of the box). Not sure if it is an issue with standard dovecot config or Android, but the only way I can get them to connect is via pop3.
View 3 Replies
View Related
Jun 7, 2015
I would like to Mysql 5.6 installed on Plesk 12. Is that possible? How does it work?
View 1 Replies
View Related
Sep 29, 2014
I have upgraded php 5.5 using below steps,
===
sudo add-apt-repository ppandrej/php5
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install php5
==
Its also upgrading Apache from 2.2 to 2.4 and after installation, it break my Apache configuration and getting configuration errors when adding domains from Plesk etc.
Is there any proper way to upgrade PHP 5.5 in Plesk 12.0(Ubuntu 12.04)...
View 1 Replies
View Related
Nov 28, 2014
I see that Plesk 12 supports MySQL 5.6, but the server I am running is Ububtu 14.04 LTS and comes with 5.5.
I need to make 5.6 available but I can see no way of doing it without breaking Plesk (I already tried just installing it from command line with apt-get install and had to restore the whole server from backup!) - there is no option for MYSQL in Plesks updates & upgrades menu ...
View 14 Replies
View Related
Feb 10, 2015
I am trying to transfer Plesk 12.0.18#34 from an Ubuntu 12 server to an Ubuntu 14 server.
Using the transfer manager, I got these warnings:
The following Apache modules are not installed on the destination server: authz_default. Please install and enable these modules to prevent possible problems. The following Apache modules are disabled on the destination server: roxy_http,proxy_html,proxy,authz_groupfile,reqtimeout. Please enable these modules to prevent possible problems. The php_version 5.3 is not available on the destination server. Instead, Plesk will use the following version: 5.5. To use the same php_version as on the source server, you should turn on or install it on the destination server. 3 domain(s) will be affected.
I am a bit puzzled by the authz_default warning as it is not supported anymore on Apache 2.4.
If I override and launch the transfer, I get these errors:
PHP Notice: Trying to get property of non-object; File: /opt/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 173
PHP Notice: Undefined index: xx.xx.xxx.202 [IP of old server]; File: /opt/psa/admin/plib/backup/Conflicts/PleskDataManager.php, Line: 180
[Code]....
View 2 Replies
View Related
Mar 2, 2015
Installing Plesk Panel with Spamassassin on Ubuntu 14.04 LTS gives a significant error:
Restarting SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed.
server socket setup failed, retry 1: spamd: could not create IO::Socket::INET6 socket on [::1]:783: Cannot assign requested address
server socket setup failed, retry 2: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
server socket setup failed, retry 9: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
invoke-rc.d: initscript spamassassin, action "restart" failed.
dpkg: error processing package sa-compile (--configure):
even though spamassassin (i.e. spamd) is not running. The usual suspects for the before mentioned error, being
a) differences in the name of the PIDFILE variable in /etc/default/spamassassin and /etc/init.d/spamassassin
b) directory and/or file location are not readable/writable
are not causing this specific installation bug. The work-arounds:
1 - not installing spamassassin (not an option)
2 - installing spamassassin and (afterwards)
change /etc/default/spamassassin, add the option "-4" to the line OPTIONS, resulting in the line: OPTIONS="--nouser-config -4 --username=popuser --daemonize --helper-home-dir=/var/qmail --virtual-config-dir=/var/qmail/mailnames/%d/%l/.spamassassin --create-prefs --max-children=5"
run plesk-installer or autoinstaller again ..Work-around 2 works fine, after reinstallation the /etc/default/spamassassin is as it should be (note that the added "-4" is not present anymore).
The before mentioned work-around suggests some error in the installation process, very likely to be an issue with the chronological order of installation of the various components. In theory, it can be excluded that this bug/issue is caused by psa-spamassassin and/or spamassassin (version 3.3.x) packages, even though some current spamassassin bugs are known: URL....I sincerely hope that Parallels Team can investigate and patch both of the bugs/issues.
View 3 Replies
View Related
May 7, 2014
We've had an issue where some of our Plesk installation was trashed. It's on a server which runs multiple live sites.
Most of the psa package no longer exists.
Is there a way to re-install Plesk without making it "think" that it's a new installation, thereby preserving all data?
Would apt-get install -f psa do it?
View 1 Replies
View Related
May 10, 2014
I had a HDD crash recently on my Root Server. Replaced HDDs, installed Ubuntu 12.04 LTS, since Ubuntu 14.04 LTS is not supported by Plesk yet. Anyway...
I had 2 issues:
1) Could not create Customers, because IP Pool was empty. Changed IP Type from Dedicated to Shared. Fixed issue.
2) Cannot connect to the FTP Server using the Login Data from one of my Domains.
FlashFXP and FileZilla both show the same error, which is:
Code:
Response:220 ProFTPD 1.3.4c Server (ProFTPD) [*ip removed*]
Command:USER *user removed*
Response:331 Password required for *user removed*
Command:PASS **************
Response:530 Login incorrect.
Error:Critical error
Error:Could not connect to server
View 1 Replies
View Related
Aug 11, 2014
on a fresh installation of Ubuntu (at first 14.04 but on 12.04 the same problem occurs) I installed Plesk via the autoinstaller. It seems to be all fine except I cannot open Plesk in the browser.
The web browser shows "502 Bad Gateway", a look into the error_log at "/var/log/plesk/sw-cp-server" shows the following error:
Code:
2014/08/11 09:37:22 [crit] 4988#0: *4 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxx.xxx.xxx.xxx:8443"
So the problem seems to be the sw-engine service that cannot be started.
If I try to start it manually with `/etc/init.d/sw-engine start` it just fails:
Code:
* Starting Plesk engine pool manager sw-engine-fpm [fail]
Where to find any startup error log for sw-engine, where I could find any further information.
View 2 Replies
View Related
Mar 18, 2015
I used the search function. Im USING UBUNTU NOT CENTOS!
I set up an virtual ubuntu Server on a Proxmox Root. I used the .iso from plesk.
Now when i tried to start installing magento, there is the message, that there is no mcrypt installed.
I installed it using php5-mcrypt its done and i can see the folders and also te mcrypt.so and so on.
When i tried to install atomic there is the message that redhead is not available at /etc/readhead...
View 4 Replies
View Related
Jun 18, 2014
We are unable to change the view to service provider in plesk12. Only power panel seems to show up.
Tried to do a bootstrap repair but that hasn't fixed it.
View 3 Replies
View Related
Jul 17, 2014
We have a problem with a Plesk backup. We have about 300 domains, the scheduled task starts 23.30 and takes about 16 hours and thats not normal. Before it took about 9-10 hours for 'All configuration and content' and that was too long, so we set up for 'All configuration and content except mail'. It worked for a few days and then it started to take 14 - 16 hours for a server backup. We use Plesk 11.5 on CentOS 6 64bit.
View 4 Replies
View Related
Jul 1, 2014
OS CentOS 6.5 (Final)
Plesk version 12.0.18 Update #6, last updated at July 2, 2014 11:13 AM
The system is up-to-date; last checked at June 27, 2014 04:43 AM
All current websites on the server seem to work fine any new subscriptions we cannot get working at all.
We can connect via FTP to new sites SOMETIMES - just cant get directory listing. When we can connect and get into a directory it slows down.
In Active mode:
Command:MLSD
Response:425 Unable to build data connection: Connection refused
Error:Failed to retrieve directory listing
Install Wordpress via the Parallels panel it loads and says it is all there, just can't log or display any pages. The default Parallels page is displayed.
Upload a html page via the File Manager in Parallels and it displays the default Parallels page.
Unpack the Wordpress tar file via File Manager and it displays the default Parallels page.
The Wordpress feature in Parallels says it is working fine, can't display any page, can't log in as it returns a 404 page or the default Parallels page.
Create a site in Presence builder and Parallels says there is a site. The default Parallels page is displayed when opening the site.
Go to DOMAINS and there is 0mb in space used and there are files listed in the File Manager - none of which can be displayed.
View 3 Replies
View Related
Jun 26, 2014
After upgrading to Plesk 12 the FTP connection has become very slow. Mode Security, Fail2Ban and Plesk Firewall have been enabled, the security is set to force sFTP and maximum security and in /etc/proftpd.d/ a conf file has been added to set the passive ports that have been opened in the Plesk Firewall (60000 to 62000)
Turning off the Mod Security does not solve the slow connection.
What can we do to detect the cause of the problem?
View 3 Replies
View Related
Apr 17, 2015
I've been having a few issues with the control panel navigation is running slow even though I have heaps of resources available and free. The server is located locally and have no problems surfing websites attached to the same server.
When I login as admin, it can take 25 seconds to load into the first screen.
CPU GenuineIntel, Intel(R) Xeon(R)CPU E5649 @ 2.53GHz
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
Memory Available 6GB used 2.5-3GB
HDD: 300GB/ approx 130GB Free
I have tried issuing a /etc/init.d/psa restart command and has made no difference.
View 1 Replies
View Related
Jun 16, 2015
We are seeing intermittent slow responses from SMTP on a RHEL6 server running Qmail on Plesk 11.5. The response is being measured from a remote Zabbix server.
The response time seems to be slow (>10s) for a period of 2-3 minutes and then returns to normal (<1s). All other services continue to be ok during the period of slowness.
The server_args line in /etc/xinetd.d/smtp_psa already contains "-Rt0" and all the DNS servers in /etc/resolv.conf are resolving properly.
From looking at the maillog file the server was receiving about 35 SMTP connections a minute at the time of the slowdown. We have the server configured to use 2 x RBL's.
I wonder if we are hitting a limit on the maximum amount of SMTP connections. The file /var/qmail/control/concurrencyincoming does not exist so, according to the Qmail manual, there shouldn't be a limit on the number of incoming SMTP connections.
View 9 Replies
View Related
May 4, 2015
In the last few days the responses from Plesk's XML API have been extremely slow. It's now taking an average of 45 seconds to handle an XML API request where it used to be more around 5 seconds. What would cause that? What service handles these requests on the server so I can try rebooting it?
View 2 Replies
View Related
Mar 26, 2015
My Plesk installation and websites are slow
OVH VPS
8G ram
100 G Harddisk
View 6 Replies
View Related
Nov 23, 2014
where to search. It appear thaht my free memory decrease each minute after reboot.When i restart it's ok but i see minute after minute the free memory is decreasing...
The command top don't show special process which explain my problem. I don't understand how a process can kill my memory but not immediatly but from reboot to after 4 or 5 hours uptime.
View 2 Replies
View Related
Jan 11, 2015
I`ve got a problem with plesk when hosting Wordpress, when using Wordpress navigating between the pages (front-end and back-end) server time seems to be 15 sec.I`ve checked CPU usage and that stays under 5%.
When I install Drupal or Concrete5 or any other application that uses PHP with MYSQL it runs very fast.I`ve already fine-tuned PHP / Apache2 / Nginx & Mysql to get the max possible performance out of it.
What i`m using for hardware:
i7 920 2.6Ghz
24GB Ram
LSI Raid controller 9260-8i
RAID 10, 6 WD Black disks (internal speed goes about 450mb/sec)
RAID 1, 2 x Samsung SSD Evo 840
Software:
ESXI 5.5, optimised for maximum performance. (no standard config)
PLESK VM has 8 cores, 16GB Ram and I/O access priority set to max.
If I move the PLESK VM to the SSD datastore it makes no difference.Again, the problem only happens when i`m installing Wordpress..I Also did a manual install of Wordpress, same issue..I`m going to try the older version of Wordpress (3.9) so see i`m having the same problems..Using the latest plesk 12 on Ubuntu 14 with trail license at the moment.
View 6 Replies
View Related
Dec 10, 2014
Today, without any change on the server side my single running website on my server started running low. After checking the running processes I realised I have these 8 processes running with high cpu load something that didn't had before.
4245 user 20 0 283m 103m 10m R 85.1 0.3 6:44.88 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4243 user 20 0 241m 68m 8736 R 83.8 0.2 6:33.45 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4259 user 20 0 254m 82m 8720 R 83.5 0.3 6:11.00 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4244 user 20 0 282m 103m 10m R 82.1 0.3 6:46.49 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4247 user 20 0 248m 76m 8712 R 78.8 0.2 6:50.31 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4264 user 20 0 258m 85m 8712 R 72.9 0.3 6:49.83 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
apache error log doesn't show any warnings, errors.
View 4 Replies
View Related
May 1, 2014
VPS hosting, stats in my sig below. Have poor performance with a drupal and civicrm(drupal based) website and looking to troubleshoot.
Main issue is pages take too long to load, sometimes over 5 seconds and more! Below is my.cnf and MYSQLtuner results.
So my.cnf
Code:
[mysqld]
set-variable=local-infile=0
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
user=mysql
[Code] .....
View 2 Replies
View Related
Nov 11, 2008
I've got 25 domains on a Virtuozzo/Plesk8.6/CentOS5 VPS. Each domain has one up-to-date install of WordPress, most have very little traffic (average 200mb per month), maybe 2 domains get 5-7gb traffic per month.
I monitor port 80 connections and rarely see more than 10 at a time.
That should in my opinion be no problem at all for a VPS with 768mb guaranteed ram and 2.4ghz cpu. I've got 30gb hard drive spare too.
But.... about 8 or 10 times a day it grinds to a complete halt: server load at 500-1000%, sites timing out, plesk takes 3mins to load, often I can't even connect with SSH, and the plesk web server, apache
INSERT INTO module_watchdog_sys_stat (time, type, value, service_id) VALUES(FROM_UNIXTIME(1226404705), 'MAINMEM_USAGE', 17472, 11);
80 seconds sounds like a huge amount of time for a MySQL insert to me! Does anyone know if this is likely to be the cause of my trouble? Some problem with Plesk and the database? Or could it be something else?
View 3 Replies
View Related
May 18, 2009
I'm interested in having an unmanaged VPS with Ubuntu 7.1 or 8.04 installed (or available to Rebuild under the HyperVM) from the state of Missouri (should have at least some IPs already available from the region).
View 2 Replies
View Related
Jun 24, 2009
email configuring problem.
I have a complete 512mb vps on slicehost.com All configuring went well.
But for some reason I can't get my email-server to work. I have followed all tutorials on articles.slicehost.com/email Also I have installed atmail(.org) on my subdomain for email.
I always get the error the password isn't correct. Also when I try with Outlook.
The password is encrypted.
I understand an email setup is a complicated thing, and you probably need more information. But do you guys have any suggestions on what it might be? I'm a newbie, so it surely can be a newbie issue.
View 2 Replies
View Related
Dec 13, 2007
I have ubuntu 6 server version running.
I am trying to import a database I have however I cannot get it working for the last 2 hours!
I have tried various commands like logging into mysql entering the "use" command to use a database and then variations of the "source" command but my db.sql file doesn't run.
Also tried the full command
mysql -uroot -pMYPASS MYDBNAME < /var/www/site/db.sql
Neither seem to do anything.
PHPMYADMIN shows no database tables at all.
Running mySQL 5.
View 4 Replies
View Related
Aug 12, 2008
I have my website in visual studio 2008 and sql server and want to host it on internet. I have searched the forum and i think softsyshosting.com is good for me. I am confused whether i should sign up for windows 2008 or windows 2003 plans from them? what is difference and benefit?
View 6 Replies
View Related
Feb 24, 2007
I know its not on the System Req. page that Zend Studio supports it, but has anyone gotten Zend Studio to work on FreeBSD ( 5 or 6 ?? ), and if so, how?
View 0 Replies
View Related
Dec 29, 2007
way to create a VPN tunnel between two ubuntu servers?
Both will be in seperate datacentres but I'd like a secure tunnel so I can setup jobs to backup to one another.
This has to be done on the server level and cannot be done at the router/firewall as I do not have access to this kit.
View 1 Replies
View Related
