Plesk 12.x / Linux :: Empty Domains Page In CP?
Oct 20, 2014
When I log into plesk (service provider view) and click on the Domains link on the left, I get an empty page. It isn't blank like there is an error, it has some instructions at the top about creating a customer etc. It just doesn't list any of the domains that are setup on the server. There are several reseller accounts with several domains under each. I've even tried setting up a new customer and adding a domain under the new customer. Still nothing shows up.
I have several other VPS accounts running Plesk 12 with several domains under different customer accounts and the domains all show up on those.
View 3 Replies
ADVERTISEMENT
Feb 5, 2015
i registered some new domains and wanted to add them via Plesk. Before i did that i got the stanard Plesk default page saying that i have to add the domains via plesk as usual.
When i did that the domain switched to a white page and is not able to load .html pages, i can load a phpinfo.php or install wordpress etc. but when i try to load a simple .html file with css or something, i only get a whitepage..
i dont know why this is happening, other domains from december are working fine, new ones wont. the error.logs are empty and even after a whole server restart it wont work.I´m using Ubuntu 14.04 LTS Server 64bit + Plesk 12.0.18
View 3 Replies
View Related
Jul 9, 2014
I am creating new sites in my panel and they are only loading the default page.
The IP is pointed correctly or I would not get the default plesk page.
All the other service seem to work ok. I can ftp in and I can edit files with the online file manager.
If I use the preview feature I can see the changes I make to the files, but that is the only way.
I looked in /var/www/vhosts/system/ and the conf files are present.
What else can I check to see why the sites are not working?
View 8 Replies
View Related
Jul 23, 2014
I have added name servers and they should be propagated fully as I created them 3 days ago.
The issue is that the domain using these name servers loads fine and then after awhile it goes back to the Plesk default page.. Then after awhile it shows again, etc. I have run reconfiguration command, have restart bind and Plesk. Not sure what else I can do.
This is sort of a test domain I wanted to get working before switching my main sites to these name servers.
domain is webdevoman.com
nameservers are ns1.talkdevelopment.org and ns2.talkdevelopment.org
View 1 Replies
View Related
Mar 5, 2015
Every domain that I have added just goes to the default Plesk landing page. I have:
* Added them as new subscriptions
* Added domains to a current subscription
* Verified that the index.html file is deleted
* Verified that vhosts is pointing to proper directory
* Confirmed that sites work when clicking 'preview'
If it matters, this is an Ubuntu install.
View 2 Replies
View Related
Dec 6, 2014
why my maillog is empty. I have checked both locations below but result remain the same:
/usr/local/psa/var/log/maillog
/var/log/maillog
I'm running this Plesk inside OpenVZ container (using centos-7-x86_64-minimal template)
View 5 Replies
View Related
Jul 23, 2015
I installed new Plesk in new VPS with Centos 7 (Virtuozzo - former PCS)... One domain is running, but when reboot the server, maillog stopped.
Last lines of the login are:
Jul 23 13:45:08 server dovecot: service=pop3, user=xxxxxxx@xxxx.com.ar, ip=[190.X.XX.XXX]. Server shutting down. rcvd=3270, sent=23925997, top=0/0, retr=327/23659830, del=0/594, size=40888121
Jul 23 13:45:08 server dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
Jul 23 13:45:08 server dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
Jul 23 13:45:08 server spamd[3369]: spamd: server killed by SIGTERM, shutting down
Jul 23 13:45:08 server postfix/postfix-script[4396]: stopping the Postfix mail system
Jul 23 13:45:08 server postfix/master[31144]: terminating on signal 15
Jul 23 13:45:08 server /usr/lib64/plesk-9.0/psa-pc-remote[2587]: PleskFilter: private data not NULL
Jul 23 13:45:08 server /usr/lib64/plesk-9.0/psa-pc-remote[2587]: PleskFilter: private data not NULL
Jul 23 13:45:08 server postfix/postfix-script[4404]: waiting for the Postfix mail system to terminate
Jul 23 13:45:13 server /usr/lib64/plesk-9.0/psa-pc-remote[2587]: PleskFilter: mi_stop=1
I can reproduce this problem, but cannot fix it....
View 1 Replies
View Related
Jul 6, 2014
Plesk 12 on Centos 6.5
I added the following to my /etc/logrotate.conf
/var/log/modsec_audit.log {
missingok
daily
rotate 4
compress
}
I'm not exactly sure if the above is the correct syntax, but the result was that two days later my current modsec_audit.log was Gzipped and a new modsec_audit.log was created.
The problem is that nothing was logged to this new file.
From the Plesk 12 control panel I turned off mod security and then turned it back on again and hey presto, the new logfile started to log events.
This leaves the problem of why nothing was recorded when the file was created.
View 2 Replies
View Related
Sep 28, 2014
I have restore my Plesk 12.0.18 Backup after new installed Server from Ubuntu Server 12 to Ubuntu Server 14.
The Backup is from Plesk 12.0.18 under Ubuntu Server 12!
After restore all Mailboxes are available and work they, but all Mailboxes are empty. No contents are restored.
New try to restore Mail Account only have no Result.
I have downloaded my backup file to local Computer and extract.
In file backup_mydomain_mn_1409281400.tgz are all Messages encrypt available. But Not restored.
Why????
View 7 Replies
View Related
Apr 22, 2015
In the fail2ban module of plesk is a tab for "logs".
Here you can view Fail2ban logs.
No items found.Click to expand...
View 6 Replies
View Related
May 26, 2015
I'm testing Plesk 12.1 and noticed after enabling ModSecurity, the modsec_audit log file is empty.
I'm running CentOS7.1 w/Plesk 12.1.23
View 2 Replies
View Related
Aug 16, 2013
Our Server doesn't show the Traffic History under "Tools & Settings -> Summary Report -> View Traffic History", but for every Domain it runs.
We Migrate this Server from a Dedicated to an OpenVZ Server - on another Server with OpenVZ its running without Problems, but this one we don't migrate.
View 3 Replies
View Related
Dec 11, 2014
I'm just wondering how I can start logging activity in Fail2Ban. I've got the following line in the "logs" tab in "IP Address Banning" in the Plesk UI:
/var/log/fail2ban.log
However when I check this it states "The file is empty".
I'm assuming there will be a setting somewhere that tells fail2ban to log to that file but I'm not sure where/what it is?
I know for sure that I've had IP's banned but they just don't appear to be logged.
View 7 Replies
View Related
Dec 4, 2013
Is there any way to auto-delete all the messages in a specific mailbox on a specify domain on a daily basis? Using Postfix.
View 4 Replies
View Related
Jun 29, 2015
I tried access my plesk box via http://ipaddress:8443 but am met with an web page not available error. I checked my disk df -h and found
/dev/mapper/VolGroup00-LogVol00 Use% is at 100%. What can I clear out to get it up and running again?
View 4 Replies
View Related
May 22, 2015
After a fail in the update procedure I had problem with plesk panel. I have run the autoinstaller from command and after that the psa database removed for some reasons.
I have follow the steps from the plesk procedure and restore is from the backup.
Everything is working now except from the home tab when I login into plesk . I get the side bar with the menus links but in the right side I get a blank page. (the other menus works fine)...
View 2 Replies
View Related
May 11, 2014
I add my site via ftp file to httpdocs but still appears in the default message domain parallels, I've made sure all correct indext.html and others, not to do.
View 1 Replies
View Related
Sep 10, 2014
I'm running plesk 11.0.9 on Centos 6. I can't login anymore, the administration login page is just a blank page. The error in the log file is:
(mod_fastcgi.c.2746) FastCGI-stderr: PHP Fatal error: Call to a member function getContext() on a non-object in /usr/local/psa/admin/plib/Navigation.php on line 54
View 2 Replies
View Related
Sep 29, 2014
I get a blank page after upgrading to the latest version using the automatic update.
View 1 Replies
View Related
Jan 11, 2015
when i add new domain in plesk panel, i receive apache http server test page. other domain works normally.
View 7 Replies
View Related
Dec 4, 2014
I have suddenly lost all of the websites on the plesk panel server 12.0.18. One of the domains was being used to spam and so I started blocking stuff and removing some of the offending files and folders and the spamming stopped.
However it got to a point where I needed to restart the server and although it was working before the restart, once I did restart it it stopped working. All domains are loading nothing and the access_log looks like nginx or FastCGI is trying to redirect the page somewhere. The bootstrapper repair log file states:
"Details: PHP Warning: include_once(Template/Writer/Webserver/Apache.php): failed to open stream: No such file or directory; File: /usr/local/psa/admin/plib/Loader.php, Line: 97"
View 5 Replies
View Related
Mar 17, 2015
yesterday I have installed CloudLinux on my Centos 6.6 server. Today only my site was not reach. I have contacted cloudlinux support but this problems does not depend from they. In my personal site I have also WHMCS. For this issue I try: [URL] Then: [URL] I changed size of buffering: [URL] And at the end this: [URL] After that I have the same problem only for one domain.
View 5 Replies
View Related
Jun 30, 2014
After the update to Plesk 12.0.18 only a white page appears in Roundcube. Unfortunately also reinstall did not remedy.
OS Debian 7.1
Plesk version 12.0.18 Update # 5, last updated at June 30, 2014 09:02 PM
Roundcube 1.0.0 [URL]
View 1 Replies
View Related
Jun 7, 2015
I have installed NGINX + PHP-FPM + PHP5Memcached + Memcached + APC on my VServer. My Problem is Page loading time of around 40-60 seconds. Installed is 12.0.18 Update #49
[URL] .....
Connection Setup: TIME
Stalled: 1.860 ms
Request/Response
TIME
Request sent: 0.214 ms
Waiting (TTFB): 47.08 s
Content Download: 41.757 ms
Explanation 47.12
I have reconfigured the Domains but nothing changed and Bootstrap Repair
Code:
/usr/local/psa/admin/bin/httpdmng --reconfigure-all
/usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
If I disable Nginx and use "Apache Module" for PHP than the TTFB time is shorter but is not the prefered way. If I use "CGI" or "FASTCGI" without Nginx than the Page loading time is a little bit shorter but with Erros on the Website.
I tried to reinstall Nginx from Plesk but this gave me Error after enable it
root@vserver:/# /usr/local/psa/admin/sbin/nginxmng -e
[2015-06-08 00:26:12] ERR [util_exec] proc_close() failed
...
[2015-06-08 00:26:13] ERR [util_exec] proc_close() failed
[2015-06-08 00:26:15] ERR [panel] Apache config (14337159720.96731500) generation failed: Template_Exception: Destination directory '/etc/nginx/plesk.conf.d/vhosts' not exist
file: /opt/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0
Destination directory '/etc/nginx/plesk.conf.d/vhosts' not existClick to expand...
View 3 Replies
View Related
Jul 2, 2014
All new domains (sites) only display the Parallels page. Upgraded to the following ...
OS CentOS 6.5 (Final)
Plesk version 12.0.18 Update #6, last updated at July 3, 2014 06:56 AM
The system is up-to-date; last checked at June 27, 2014 04:43 AM
Pretty sure it is a permissions problem, have tried chown -R domain.com.au domain.com.au and returns invalid user.
Can now FTP, use webmail, preview the site and have uploaded a pretty big site .... the Paraellels site displays it as 0mb disk space used and only displays the default Parallels place holder.
This is what a new domain name is displaying ######################################
Files listed in the file manager ######################################
Files uploaded using Filezilla FTP program ######################################
Default place holder ... can't display any other page. ######################################
Have checked all DNS settings and they match the other domains.
View 2 Replies
View Related
Jun 3, 2014
I have setup Nginx to serve static pages. I cache some pages and therefor they are static and should be served by Nginx. Now, how can i check if a specific page actual was served by Nginx and not Apache?
View 1 Replies
View Related
Feb 5, 2015
I've checked the firewall and FTP is allowed incoming, I added the passive ports to the firewall. Plesk shows the user in active connections, but when I connect to any domain I get an error that its not able to retrieve the directory. I am not sure if plesk just doesn't know what the directory is or if the main config messed up on the domain or sites level. I am running Plesk 12 on CentOS7.
View 1 Replies
View Related
Jun 2, 2015
I am currently unable to access the Plesk control panel except from the web server itself. When I try any of the following options, all work on the server itself but externally all I get is the default Tomcat page.
https://server_name:8443
https://anydomain.com:8443
https://local_ip_address:8443
https://external_ip_address:8443
I don't know if the problem is on the server itself or something within our firewall - we use Microsoft Forefront TMG. The port 8443 is open, and the Tomcat page is being served. All websites working fine, both internally and externally. The server itself is in a DMZ on the network.
The server is running Centos 7 with Plesk 12.
I just noticed that when adding a new domain, I am warned that the domain resolves to another IP address - the external one. Currently, the IP address set up in Plesk is the internal (192.168...) address. Could it be that I need to change this to the external?
View 1 Replies
View Related
Jul 2, 2014
If I go to Hosting Services - Domains and try to switch page, i get this error:
plesk TypeError: item.owner Name is null undefined
And beyond that point, no domains are displayed in Domains...
View 3 Replies
View Related
Aug 25, 2014
Is there any way to get rid of this loading icon every time you visit the tools and settings page (top right during page loading)? It only happens on our Plesk 12 servers that were not upgraded from Plesk 11.5.
Its irritating because the page layout jumps around after the loading is complete. It is the only page to do it and it happens regardless of the internet speed.
Disabling "Enable access to premium commercial apps on the Interface Management page fixed the issue in Plesk 11.5 but this does nothing in Plesk 12.
View 1 Replies
View Related
