Plesk 12.x / Linux :: Domains Work And Then Show Default Page?
Jul 23, 2014
I have added name servers and they should be propagated fully as I created them 3 days ago.
The issue is that the domain using these name servers loads fine and then after awhile it goes back to the Plesk default page.. Then after awhile it shows again, etc. I have run reconfiguration command, have restart bind and Plesk. Not sure what else I can do.
This is sort of a test domain I wanted to get working before switching my main sites to these name servers.
domain is webdevoman.com
nameservers are ns1.talkdevelopment.org and ns2.talkdevelopment.org
View 1 Replies
ADVERTISEMENT
Jun 3, 2008
I have domains parked on a subdomain. Since i updated the apache configuration with cPanel the parked domains just show the default apache configuration. The domain shows up under parked domains. I can delete the domain and readd then it works. However, that isn't a good option cause there are 100+ domains.
View 6 Replies
View Related
Jan 13, 2015
i've migrate from plesk 11.5 (centos server) to plesk 12 (ubuntu 14). The migrate process doesn't give problems but now (and for all domains), web service doesn't work well in fact works but all domains resolve /var/www/vhosts/default/htpdocs/index.html and not /var/www/vhosts/domain/httpdocs/
The rest of services (mail, ftp...) seems to work ok. I don't know if it's important but as before migrate, we use and external DNS server so in plesk i have DNS server down.
View 1 Replies
View Related
Jul 9, 2014
I am creating new sites in my panel and they are only loading the default page.
The IP is pointed correctly or I would not get the default plesk page.
All the other service seem to work ok. I can ftp in and I can edit files with the online file manager.
If I use the preview feature I can see the changes I make to the files, but that is the only way.
I looked in /var/www/vhosts/system/ and the conf files are present.
What else can I check to see why the sites are not working?
View 8 Replies
View Related
Feb 18, 2015
I have test server with > VMware CentOS + Plesk 12...And after reboot, plesk "localhost.localdomain" show me "Apache 2 default page"I do this > service httpd restart, and after all ok. (Show Plesk Default page) no apache page.I want normaly reboot server and show "Plesk default page" no apache...
View 4 Replies
View Related
Dec 4, 2014
I have suddenly lost all of the websites on the plesk panel server 12.0.18. One of the domains was being used to spam and so I started blocking stuff and removing some of the offending files and folders and the spamming stopped.
However it got to a point where I needed to restart the server and although it was working before the restart, once I did restart it it stopped working. All domains are loading nothing and the access_log looks like nginx or FastCGI is trying to redirect the page somewhere. The bootstrapper repair log file states:
"Details: PHP Warning: include_once(Template/Writer/Webserver/Apache.php): failed to open stream: No such file or directory; File: /usr/local/psa/admin/plib/Loader.php, Line: 97"
View 5 Replies
View Related
Jun 2, 2015
I am currently unable to access the Plesk control panel except from the web server itself. When I try any of the following options, all work on the server itself but externally all I get is the default Tomcat page.
https://server_name:8443
https://anydomain.com:8443
https://local_ip_address:8443
https://external_ip_address:8443
I don't know if the problem is on the server itself or something within our firewall - we use Microsoft Forefront TMG. The port 8443 is open, and the Tomcat page is being served. All websites working fine, both internally and externally. The server itself is in a DMZ on the network.
The server is running Centos 7 with Plesk 12.
I just noticed that when adding a new domain, I am warned that the domain resolves to another IP address - the external one. Currently, the IP address set up in Plesk is the internal (192.168...) address. Could it be that I need to change this to the external?
View 1 Replies
View Related
Jul 14, 2012
I upgraded from 10.4.4 to 11.0.9 and saw no errors in the process, everything was fine. However when I checked the sites after, all of them (including sub-domains) were showing the default domain page. All the files are still there no problem, and as a test I deleted a subdomain a recreated it and it worked fine.
I have a feeling it's something to do with IP addresses (I currently have two set up - most sites use one and about only 5 use the other) as going to the subscription and changing the IP address over to the other one then back to the original seems to make the site show up for most sites. I can't do this on all sites though - any commands to reconfigure everything and get it all back in to place?
View 19 Replies
View Related
Jan 13, 2015
I disabled a site, and instead of getting the default placeholder when visiting the domain, I get another web site that I host.
[URL]
View 2 Replies
View Related
Mar 27, 2015
I am migrating my old environment from Plesk 10.4.4 on Ubuntu 10.04 to Plesk 12.0.18 on Ubuntu 14.04. I was able to migrate the sites from the old server over to the new server with little issue. The new server configuration with Apache and Nginx wasn't working for me, so I disabled Nginx and reconfigured all domains. I moved each site over one at a time and tested them, resolving issues when they arose, and moved on to the next domain. One thing I did not notice at the time, was the server would intermittently display the default parallels index.html page on the sites.
I would test one site, see it is working, and move to the next, etc. I would then retest the sites and they would display the index.html page. I have tried reconfiguring each domain, restarting Apache to no avail. One site I have is a static site, whereas all of the others are Drupal sites. The static site would display once Apache was restarted, but will go back to the default page after a while. The same thing occurs with the Drupal sites as well. It is just like the sites are shutting down for some reason.
I have checked the log files, and have not come across anything out of the ordinary. I have followed several threads which discussed DNS. The issue occurs when DNS is turned on, and when it is turned off. I do not use DNS on the server since the DNS records are being managed elsewhere. I have even added the correct name servers under each subscription in our system. I have used the Web Server Configuration checker and receive one warning. I followed the steps in [URL] .... I queried the psa database retrieving an Empty set (0.00 sec). Nothing seems to work. One minute the site is there, the next is the default page. As of right now, I am unable to put this server into production since it is not behaving as it should.
View 1 Replies
View Related
Jan 12, 2015
Impossible to find a way to show, by default, all domains and websites...
When I log on the Plesk Admin, I come first on a list of websites and domains, but they are not «all» listed. I have to go to the full bottom of the page to click on «Show all».
I didn't find a preference or anything else to change that, and I don't understand why all domains are not listed.
View 3 Replies
View Related
Jul 5, 2014
Joomla now requires PHP 5.3.10 or above but PHP 5.3.3 is installed. I rely almost exclusively on Plesk to keep the server components up to date and now I can't update my Joomla websites. I tend to avoid working at the command prompt, which is why I lease Plesk. I see that Plesk supports dual (or multiple) PHP versions, but the panel doesn't seem to deploy other versions. Does Parallels plan to allow customers to install multiple versions of PHP from the control panel so that PHP won' break legacy software but the newer apps will be able to run also?
(IMHO a better solution would have been for PHP 5.4 to be fully backward compatible)
View 1 Replies
View Related
Oct 27, 2014
i have a domain registered within PLESK having the same name as the server itself. After a short period of time the domain shows up the PLESK default page instead of the original content located in the vhost httpdocs directory.
To restore the content it's possible to deactivate and re-activate the domain from the customers control panel. But after an amount of time the default page comes back.I first recognized the error after the update to PLESK 12.
View 2 Replies
View Related
Oct 15, 2014
I have multiple domains on a single IP address and many require SSL Certificates.
I have enabled SNI in /etc/psa/psa.conf so it now says "SNI_SUPPORT true" as it was originally set to False. Setting this to TRUE then enabled the SSL option in 'Websites & Domains'.
I then purchased and installed the SSL Cert and activated it in the domain settings. On a dedicated IP address, this would work.
When I checked the certificate. it was not using the assigned SSL cert, instead it was using the Servers default certificate (plesk) that is assigned to the shared IP address.
When I check, I get the error message: "[warn] RSA server certificate CommonName (CN) `plesk' does NOT match server name"
I then rebooted the server and it made no difference. I changed the domain to a spare dedicated IP address, and the SSL Cert was certified correctly (it used the correct SSL Cert). When I changed it back to the shared IP address, it reverted back to the shared IP address' SSL cert. So the new SSL Cert was being ignored.
For info: currently running 11.0.9 on Centos 5 and I'm testing this with latest IE, FF, Chrome so it accepts TLS Server Name Indication.
View 2 Replies
View Related
Oct 20, 2014
When I log into plesk (service provider view) and click on the Domains link on the left, I get an empty page. It isn't blank like there is an error, it has some instructions at the top about creating a customer etc. It just doesn't list any of the domains that are setup on the server. There are several reseller accounts with several domains under each. I've even tried setting up a new customer and adding a domain under the new customer. Still nothing shows up.
I have several other VPS accounts running Plesk 12 with several domains under different customer accounts and the domains all show up on those.
View 3 Replies
View Related
Feb 5, 2015
i registered some new domains and wanted to add them via Plesk. Before i did that i got the stanard Plesk default page saying that i have to add the domains via plesk as usual.
When i did that the domain switched to a white page and is not able to load .html pages, i can load a phpinfo.php or install wordpress etc. but when i try to load a simple .html file with css or something, i only get a whitepage..
i dont know why this is happening, other domains from december are working fine, new ones wont. the error.logs are empty and even after a whole server restart it wont work.I´m using Ubuntu 14.04 LTS Server 64bit + Plesk 12.0.18
View 3 Replies
View Related
Mar 5, 2015
Every domain that I have added just goes to the default Plesk landing page. I have:
* Added them as new subscriptions
* Added domains to a current subscription
* Verified that the index.html file is deleted
* Verified that vhosts is pointing to proper directory
* Confirmed that sites work when clicking 'preview'
If it matters, this is an Ubuntu install.
View 2 Replies
View Related
Mar 22, 2015
Plesk 12.0.18 on CentOS 6.5 using Postfix...i have configured outgoing mail control to have a limit on a domain. I have removed all entries from the server wide white list.This setting - Allow scripts and users to use Sendmail is unchecked.However I can send any number of messages using PHP's mail() command from a PHP script on the domain.I see this in the maillog:Error during 'limit-out' handler...But the email is sent and no limit is applied.
View 7 Replies
View Related
Dec 26, 2013
My one website & all it's sub-domains automatically showing Plesk Default Page . After checking further, I found websites were stopped on the server . I manually started them but after few hours again same status . I repeated the same thing several times but issue not fixed.
View 9 Replies
View Related
Mar 31, 2014
I've installed the Plesk Panel onto a windows 2008 server. It's all good, web sites are flowing and I'm really happy with the software. The issue I'm having is a customer has an asp site with an access database. After I uploaded their site, they couldn't write to the database, so I had to manually go and set the permission on the database for the "Plesk IIS Anonymous Account (IUSR_xxx)" user to have modify access on the file.
So my question is this, how can I set up the default hosting account to already allow this and so I don't have to go an waste time tweaking the folders manually trying to find the right permissions?
Also, why is it the Plesk IIS Anonymous account that needed to have it's permissions tweaked and not the "Default Plesk application pool user (IWAM_plesk(default))" which is the user who's configured on the application pool in IIS? I can't see where the Plesk IIS Anon user is being used.
View 1 Replies
View Related
Sep 13, 2007
on my old centos servers I can show hidden (.file) files with normal 'ls' and 'ls -l' command but on new I can`t show hidden files on that way, I must use command 'ls -a' to show that files!
Also, on new server I only see dir in who I working:
[root@server dir]#
but on old server this look:
root@server [/usr/local/dir]#
Also, on new server I have new colors for dirs, files..
View 3 Replies
View Related
Aug 10, 2007
I have a windows server. Hosted one website. Someone did the configuration for me, and everything works fine.
Now i have a new website. I added the files in a new folder under wwwroot (so there're 2 folders in wwwroot now). Then also added it inside IIS FTP Sites and Web Sites (but not sure if the settings are correct). As for the nameservers, i use back the same ones (as the old website).
I can view the files in the server, but i cannot enter it via browser.
View 2 Replies
View Related
Dec 12, 2014
I want to know what settings to make in the Dns of my Server so always to show the www. in the browser, before the domain name.
For example, in the url to be www.mydomain.com and not mydomain.com
View 1 Replies
View Related
Mar 23, 2015
Is here a tutorial special for plesk 12 that show me how set nginx to show real visitor ip in access_log and php?
Actual nginx show for IPv6 visitors the own server IPv6 in access_log and php.
View 5 Replies
View Related
Nov 13, 2014
how can i show in putty during ssh session the version of wordpress used for a specific domain ?
View 4 Replies
View Related
May 20, 2014
I installed plesk 12.0.18 on some servers all is running ok but in one server after update the new feature to limit outgoing mail is missing. I installed ModSecurity Web Application and is missing too.Panel is not on Power User mode
View 2 Replies
View Related
May 11, 2014
After a fresh install of Plesk 11.5 am unable to FTP the server.
The FTP client shows that successful but no file in the remote server and its lock I saw only / I cannot stroll the client on remote server
Site builders work ok, Wordpress and built software update and publish...
View 5 Replies
View Related
Oct 7, 2014
Have the same case for 4 servers (web and pro), the menu in plesk could not show another choice, only fastcgi.
Handlers look like ok:
root@serveur:~# /usr/local/psa/admin/sbin/php_handlers_control --list
id: display name: version: type: cgi-bin: cli-bin: php.ini:
module 5.4.4 5.4.4 module /usr/bin/php5-cgi /etc/php5/cgi/php.ini
fastcgi 5.4.4 5.4.4 fastcgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini
cgi 5.4.4 5.4.4 cgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini
[code]....
How to force to display php module ?
View 3 Replies
View Related
Nov 25, 2008
Dedicated IP shows cpanel great success page!
i have a dedicated server running cpanel whm and i most sites have a single main shared ip.
When i assign a dedicated ip to new user account in cpanel, the domain points to cpanel great success page. The site doesnt load. Strangely, if i type dedicated.ip in the browser, the site loads fine.
View 8 Replies
View Related
