Plesk 11.x / Linux :: Report Traffic History Empty

Aug 16, 2013

Our Server doesn't show the Traffic History under "Tools & Settings -> Summary Report -> View Traffic History", but for every Domain it runs.

We Migrate this Server from a Dedicated to an OpenVZ Server - on another Server with OpenVZ its running without Problems, but this one we don't migrate.

View 3 Replies


ADVERTISEMENT

Plesk 12.x / Linux :: Why Mailog Is Empty

Dec 6, 2014

why my maillog is empty. I have checked both locations below but result remain the same:

/usr/local/psa/var/log/maillog
/var/log/maillog

I'm running this Plesk inside OpenVZ container (using centos-7-x86_64-minimal template)

View 5 Replies View Related

Plesk 12.x / Linux :: 12.5.27 Mail Log Is Empty

Jul 23, 2015

I installed new Plesk in new VPS with Centos 7 (Virtuozzo - former PCS)... One domain is running, but when reboot the server, maillog stopped.

Last lines of the login are:

Jul 23 13:45:08 server dovecot: service=pop3, user=xxxxxxx@xxxx.com.ar, ip=[190.X.XX.XXX]. Server shutting down. rcvd=3270, sent=23925997, top=0/0, retr=327/23659830, del=0/594, size=40888121
Jul 23 13:45:08 server dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
Jul 23 13:45:08 server dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill)
Jul 23 13:45:08 server spamd[3369]: spamd: server killed by SIGTERM, shutting down
Jul 23 13:45:08 server postfix/postfix-script[4396]: stopping the Postfix mail system
Jul 23 13:45:08 server postfix/master[31144]: terminating on signal 15
Jul 23 13:45:08 server /usr/lib64/plesk-9.0/psa-pc-remote[2587]: PleskFilter: private data not NULL
Jul 23 13:45:08 server /usr/lib64/plesk-9.0/psa-pc-remote[2587]: PleskFilter: private data not NULL
Jul 23 13:45:08 server postfix/postfix-script[4404]: waiting for the Postfix mail system to terminate
Jul 23 13:45:13 server /usr/lib64/plesk-9.0/psa-pc-remote[2587]: PleskFilter: mi_stop=1

I can reproduce this problem, but cannot fix it....

View 1 Replies View Related

Plesk 12.x / Linux :: After Mod Security Logrotate New Log Is Empty

Jul 6, 2014

Plesk 12 on Centos 6.5

I added the following to my /etc/logrotate.conf

/var/log/modsec_audit.log {
missingok
daily
rotate 4
compress
}

I'm not exactly sure if the above is the correct syntax, but the result was that two days later my current modsec_audit.log was Gzipped and a new modsec_audit.log was created.

The problem is that nothing was logged to this new file.

From the Plesk 12 control panel I turned off mod security and then turned it back on again and hey presto, the new logfile started to log events.

This leaves the problem of why nothing was recorded when the file was created.

View 2 Replies View Related

Plesk 12.x / Linux :: Mailboxes After Restore All Empty

Sep 28, 2014

I have restore my Plesk 12.0.18 Backup after new installed Server from Ubuntu Server 12 to Ubuntu Server 14.

The Backup is from Plesk 12.0.18 under Ubuntu Server 12!

After restore all Mailboxes are available and work they, but all Mailboxes are empty. No contents are restored.

New try to restore Mail Account only have no Result.

I have downloaded my backup file to local Computer and extract.

In file backup_mydomain_mn_1409281400.tgz are all Messages encrypt available. But Not restored.

Why????

View 7 Replies View Related

Plesk 12.x / Linux :: Fail2ban Empty Logs

Apr 22, 2015

In the fail2ban module of plesk is a tab for "logs".

Here you can view Fail2ban logs.

No items found.Click to expand...

View 6 Replies View Related

Plesk 12.x / Linux :: Empty Domains Page In CP?

Oct 20, 2014

When I log into plesk (service provider view) and click on the Domains link on the left, I get an empty page. It isn't blank like there is an error, it has some instructions at the top about creating a customer etc. It just doesn't list any of the domains that are setup on the server. There are several reseller accounts with several domains under each. I've even tried setting up a new customer and adding a domain under the new customer. Still nothing shows up.

I have several other VPS accounts running Plesk 12 with several domains under different customer accounts and the domains all show up on those.

View 3 Replies View Related

Plesk 12.x / Linux :: Empty Modsec Audit Log?

May 26, 2015

I'm testing Plesk 12.1 and noticed after enabling ModSecurity, the modsec_audit log file is empty.

I'm running CentOS7.1 w/Plesk 12.1.23

View 2 Replies View Related

Plesk 12.x / Linux :: No Logs For Fail2ban - File Is Empty

Dec 11, 2014

I'm just wondering how I can start logging activity in Fail2Ban. I've got the following line in the "logs" tab in "IP Address Banning" in the Plesk UI:

/var/log/fail2ban.log

However when I check this it states "The file is empty".

I'm assuming there will be a setting somewhere that tells fail2ban to log to that file but I'm not sure where/what it is?

I know for sure that I've had IP's banned but they just don't appear to be logged.

View 7 Replies View Related

Plesk 11.x / Linux :: How To Auto-empty Specific Mailbox Daily

Dec 4, 2013

Is there any way to auto-delete all the messages in a specific mailbox on a specify domain on a daily basis? Using Postfix.

View 4 Replies View Related

Plesk 11.x / Linux :: Statistics Report Errors For Mailing Lists

Aug 26, 2012

When executing "statistics" these errors occur:

# /usr/local/psa/admin/sbin/statistics

WARNING during statistics_collector execution: : statistics_collector: Unable to get dir size of /var/lib/mailman/lists/14
System error 2: No such file or directory
statistics_collector: Unable to get dir size of /var/lib/mailman/archives/private/14.mbox
System error 2: No such file or directory
statistics_collector: Unable to get dir size of /var/lib/mailman/archives/private/14
System error 2: No such file or directoryClick to expand...

View 7 Replies View Related

Plesk 12.x / Linux :: Reset Outgoing Mail Limits Report

Jul 27, 2014

How do you reset the outgoing mail limits report?I have been doing some testing and I don't want the report to show that some of my domains are over their limits.

View 1 Replies View Related

Plesk 12.x / Linux :: Outgoing Mail Limit - Report - Access Denied

Sep 27, 2014

On the dashboard (intro page) there is the option "Outgoing Mail Control" and there the link "See report". When clicking on "See report" I get a "Warning: Permission denied." error message when being logged in as the full administrator. Is this due to an error in an update or what is going on here?

View 1 Replies View Related

Plesk 11.x / Linux :: Report / List / Statistics Of Top Domains Continuously Gray-listed?

Oct 15, 2014

I'm looking for a way to get a report of the top domains that are continuously greylisted so I can determine which ones need to be put on the "domains- whitelist" because they use different IPs when resending, causing very long delays (hours/days/never) for each message sent.We're using Plesk11 on CentOS 6.4 with Postfix and the Plesk built-in Greylisting option enabled.

# /usr/local/psa/bin/grey_listing --info-server
Grey listing configuration.

Grey listing checking enabled
Grey interval 5 minutes
Expire interval 51840 minutes
Penalty interval 2 minutes
Penalty disabled
Personal grey listing
configuration allowed

[code]....

Black domains patterns list:

SUCCESS: Gathering of server wide information complete.Click to expand...

View 4 Replies View Related

Plesk 12.x / Linux :: What Domain Is Getting All The Traffic

Jan 15, 2015

Is there a way to see what domain is getting hit when I have a huge traffic spike? Not the daily report, but in real time? Like when it is happening?

View 1 Replies View Related

Plesk 12.x / Linux :: SMTP Traffic - Forwarding Email Addresses

Nov 11, 2014

I have two sites that register a high amount to SMTP traffic. Both sited have only forwarding email addresses.

Do forwarding addresses accumulate SMTP traffic on the log?

Also, if a forwarding email is created without a mailbox is it necessary to add a password so that "others" cannot use the blank SMTP server to send email out?

View 2 Replies View Related

Plesk 12.x / Linux :: No FTP Directory Listing After Block (Allow Other Incoming Traffic)

Dec 25, 2014

Today I try to fit all FW rules to my need. After i blocked the traffic "allow other incoming traffic" in the Plesk FW i dont get folders listed via FTP. The FTP client connect to my server, but listing content times out. After allow other traffic the content get listed. The rule "Allow FTP connections" ist in all enabled all the time.

View 3 Replies View Related

Plesk 12.x / Linux :: Traffic Notification On Restored Site In Web Admin Edition?

Jun 14, 2015

I'm getting a traffic notification on a site I restored from a backup that originally came from a standard Plesk edition. Web Admin Edition doesn't appear to have access to Subscriptions, and all I can find with regard to limits under Webspaces is a hard disk quota, which isn't even editable. How do I amend of remove the limit?

View 6 Replies View Related

Plesk 12.x / Linux :: System Policy For Incoming Traffic - Firewall Not Working Correctly

Jun 25, 2015

When I deny all other traffic for the "System policy for incoming traffic" to secure the server by only allowing the explicit ports I've requested to open, my server stops operating correctly.

It appears when I set the "System policy for incoming traffic" to deny, it appears to be disrupting various functions such as web traffic over ports 80/443, FTP, SSH, they either work extremely slow or don't work at all.

I brought this up with my Plesk license provider and they stated that the Plesk firewall doesn't add any tracking for ephemeral ports, therefore if you set the policy to drop for incoming/outgoing, it's not going to allow proper TCP communication since the return socket can't be opened. Also that the firewall is an explicit deny system rather than explicit allow based system.

Am I doing something wrong? All I want to do is to block all ports other than the ones I've set to allow. Is this how it is supposed to work?

View 1 Replies View Related

Plesk 12.x / Linux :: (Notify When Disk Space / Traffic Usage Reaches) Sending To Customers Not Admin

Jan 29, 2015

I migrated from one server running Plesk 10.4.4 Update #59 to a new server running Plesk 11 which I then updated to 12.0.18 Update #32. Since moving to Plesk 12 the "Notify when disk space/traffic usage reaches" emails have been being sent to our customers set up on the server whereas previously they were sent to the server admin email address.

Is this a change with this version?

View 1 Replies View Related

Plesk 11.x / Windows :: AppVault Is Empty

Aug 2, 2012

I just installed P11 and the AppVault is empty - how do I tell it to download all the apps from the aps catalog like I can do in linux? Is there a command line alternative for it as well?

for example in linux you would do

/usr/local/psa/bin/aps_catalog --install-applications-bundle 3Click to expand...

View 1 Replies View Related

Plesk 12.x / Windows :: Some Fields Are Empty Or Contain Improper Value

Mar 4, 2015

I have problem with my windows plesk when i login show me a page to fill administrator detail but when i complete it this error appear .

Error: Unable to update administrator information:

Some fields are empty or contain an improper value. ('login' = '')

View 11 Replies View Related

Plesk 12.x / Windows :: Empty Host Name On IIS Site Bindings

Mar 23, 2015

Plesk, for an unknown reason to me, creates an "empty binding" on one specific website every time I make a "hosting change" on that very website (subscription in Plesk terms). What I mean by a "hosting change" is things like enabling/disabling SSL, adding/removing aliases and anything similar that might require Plesk to re-arrange the bindings for that website.

The issue exists only on one of the many websites I am hosting/configuring via Plesk, the others don't have any similar issues.The result of the issue is the given website being stopped by IIS since the "empty binding" is already in use by the "Default Web Site".If I go ahead and delete the empty binding from the given website, I can start the website up again.The Plesk version I am having is 12.0.18 Update #38, which I assume is the latest one.

View 4 Replies View Related

Plesk 11.x / Windows :: SmarterMail 11.6 - Some Fields Empty Or Contain Improper Value

Sep 26, 2013

I'm setting up a server that has both Plesk 11.5 and SmarterMail 11.6 on it. I'm trying to get Plesk set to use the SmarterMail, and it sees it fine in the Server Components, but when I try to set it as the default and put in the password information it comes back and says: Error: Some fields are empty or contain an improper value.

I thought maybe it didn't like some of the characters I had in the password, and tried simplifying that but it didn't work. So I'm wondering if it is just because Plesk 11.5 won't work with SmarterMail 11.6 yet?

View 3 Replies View Related

Plesk 11.x / Windows :: Control Panel With Crystal Report

Jan 9, 2014

I have a website works with Crystal Report, it worked with Windows server 2008 and Plesk Panel 10, now I upgrade my windows server to 2012 and plesk 11.5 and I gave this error: Server Error in '/' Application.....Please see the attached file (Error Image)

I check many things, for example I run the website on windows server 2012, just With IIS and it works fine, then I install the plesk 11.5 and take the error again.. now I sure 99% the error related to plesk....

View 1 Replies View Related

Plesk 11.x / Windows :: Configure Report Emails To Use SMTP Authentication?

May 12, 2014

Plesk Panel, 11.0.9, #61, Windows 2008 R2 SP1, x64

PROBLEM:
With reports configured to send out to an email address local on the Windows server configured through PLESK, if local relay isn't enabled at 127.0.0.1 on the SmarterMail server, the reports are never delivered.

- server is [domainx].com
- email to receive reports from PLESK is plesk444@[domainx].com
-this email address is able to send and receive internally or externally to and from any client w/ SMTP auth enabled.

If SmarterMail is configured with SMTP Authentication Bypass for 127.0.0.1, we get the scheduled report emails as we should. Without the SMTP Authentication Bypass enabled, none of the clients or administrators get any reports or notifications at all.

QUESTION: How can I configure PLESK Panel 11 itself to use that SMTP Authentication to send those reports out?
--is there a configuration file or registry value I can add or modify?

View 2 Replies View Related

Plesk Automation :: Bug Report - Wget Missing When Installing A New (backup) Node

Apr 1, 2014

I brought up a basic centos 6.5 install in desire to add it to my ppa cluster.

The ppa installation task failed because wget was missing on the new node. The error message made it easy to fix (yum install wget) but thought I'd report it so that your pre-req scripts can check and install it for future users.

View 3 Replies View Related

Plesk 12.x / Windows :: Unable To Update Administrator Information - Some Fields Are Empty Or Contain Improper Value

Mar 7, 2015

Problem after upgrading to 12

Error: Unable to update administrator information:Some fields are empty or contain an improper value.

('login' = '')

View 4 Replies View Related

Traffic Shaping And Dos Protection In Linux

Apr 17, 2008

Is there a way to use traffic shaping in Linux? Like limit traffic to certain port, set priorities etc. Like ex: I'd want to set FTP to use max of 1mbps, http max of 80mbps, and set total to 90mbps.

Also is there ways to setup dos protection within linux? What I'd basically want is if it detects a dos, it either turns off the server, or does some other action that would cut it off either until I take action or for a set amount of time. Think turning off would be only solution since if I just drop packets I'd still be paying for that traffic.

Basically I want to ensure that if I get a DoS I'm not stuck paying insane bandwidth overcharges. I rather have a few days of downtime to deal with, then a few thousand dollars to pay and me having to declare bankruptcy and sell property etc...

View 6 Replies View Related

Plesk 11.x / Windows :: Could Not Find Password For Account ID / Return Empty Password

Nov 19, 2013

Everyday after Backup Panel (Tasks from Backup Manager), I receive next error:

<?xml version="1.0" encoding="utf-8"?>
<execution-result status="error">
<object name="domain.ru" type="domain">
<message severity="error" id="416a91ad-e5e7-480b-b6b4-a60157b8eaae" code="InformationalException">
<description>Could not find password for account id '2648'. Return empty password</description>
</message>
</object>
</execution-result>

Resolve -> only reconfigure domain. How can I automatic fix this problem?

View 5 Replies View Related

Possible To Change The History Counts?

Nov 18, 2008

Is it possible to change the history counts? Just see, when i type history command on my machine, i get around 1000 last typed commands.

Is it possible to change that count ?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved