We seem to be getting 3 copies of all email notifications whenever an account is created, it seemed to happen after a server transfer but I can't see anywhere that is set up as a duplicate.
I have a customer on a 250MB hosting plan and has been using approximately 450MB for the past few days but hasn't received a resource overuse email.
In my notifications I have "Resource usage limits exceeded by subscription" set to send myself and the customer an email but neither of us have received anything.
When my server reboots I get about 12 email notifications from Watchdog that services are being started.I don''t get the same thing from my other Plesk servers upon reboot. How can I stop it?
My Plesk Panel stopped to send notifications a while ago, I don't receive mails when the backup are done, the clients can't receive their passwords if they need to reset...
The mails are not being forwarded when they configure it in the panel (I receive a mail in mail1@mydomain.com and I want it forwarded automatically to mail2@gmail.com or wherever).
I don't see nothing about the plesk panel mail in the postfix log and I don't know what else to check.
Fehler: Unable to create notification: Unable to create Note object: Note: unable to select: no such row in the table and Fehler: Benachrichtigung kann nicht aktualisiert werden: Unable to create Note object: Note: unable to select: no such row in the table
In tools&settings -> Email Notifications
I run plesk 12.00.18#7 and i have upgrade from 11.5.30 ....
I want to set plesk to allow the overuse for disk space and bandwidth for my customers, but not for e-mail accounts.
If I do not allow overuse, what exactly happens when a customer exceeds the use of resources? The plesk panel immediately stops all the customer's services? Or what?
Moreover: is there a diagnostic utility to understand if the plesk panel is working correctly and is correctly installed?
I have a VPS running Plesk 11.x and yesterdady I tried adding a new domain to my subscription and received this error:
Error: Unable to update domain data: Unable to restore the DNS zone: an error occurred while adding the DOMAINNAME IN A DOMAINNAME record: Incorrect DNS record values were specified.
I have one subscription and under that a few domains. I've not had any DNS issues before so I'm a little stumped as to where to start looking. I suspect DNS template issues but I'm not that au fait with the DNS template so I don't want to start fiddling. My service provider suggested I look at [URL] ... which doesn't appear to be related as I have no duplicate domains under my subscription.
Following on from this the VPS is my personal server and I host a few sites for friends consequently I only have the one subscription. I've been advised that I should have one subscription per domain. Is that correct information?
I have Plesk and SmarterMail running on a server.SmarterMail is setup as 'require SMTP authentication before relaying' email (I think this is standard practice).I cannot get Plesk to send any emails, such as forgotten password reminders and notifications.Plesk tries to send but gets a "550 Authentication is required for relay" error... which is expected, because I can't find anywhere in Plesk to enter the authentication details for the email account being used to send (relay) the emails.
I don't want to setup a 'whitelist' or 'bypass relay authentication' for 127.0.0.1 as I have had a spam issue with this previously.where to enter the username / password details so Plesk Panel can authenticate and send it's emails?
How can I completely disable ALL notifications from plesk? We NEVER want plesk to notify customers of overages.
Not only do we want to disable all notifications but I want someone at parallels to know about the bug.. It notifies people that they are over or approaching limits when they aren't anywhere near it.. Here is a sample of one of the notifications emails sent. Names and emails changed of course...
Code: From: My Name [mailto:me@mydomain.com] Sent: Wednesday, October 09, 2013 3:38 AM To: My Customer Name Subject: <host.mydomain.com> Notification: Resource usage by subscription has exceeded the allotments.
The 'domain.com' subscription, owned by user 'Customer Name', is approaching or already exceeded the resource usage limits:
On one CentOS 6.5 Plesk 12.0.18 install (with all MUs applied) each time an admin logs in a notification is displayed ("Plesk was successfully updated. View detailed information on the updates.") and once a week the panel generates an email notification (Plesk panel updated successfully).
Other Plesk 12.0.18 servers that are set to automatically update aren't generating this email notification or displaying the "green" notification upon login to the Plesk Panel. Is there a flag, tmp file, or a DB trigger that isn't being set properly to cause this?
We have more than 10 domains on the same webspace, sharing the same document root. When we try to add a new domain on the same web space (sharing the same document root) Plesk takes a long time to create it (about 10 minutes). While domain creation, all the other domains sharing the same document root and web space get an authentication error. When Plesk finishes, all domains work again.
I have installed mail servers in components, and i see mail settings under server tab but i just cant figure out how to enable mail for specific domain
If i go to webmail.pedjaapps.net i opens default home page, webmail subdomain points to my servers ip address in DNS, roundcube is also enabled in webmails....
I am skeptical of running mchk on my server and messing something up. I am having an issue with one domain hosted on my server getting 100's of duplicates from certain domains. My MagicSpam logs show that the email is sent to my server anywhere from every 15 minutes to 1 hour. It started out as one domain sender to my server to my client, now it is happening to a bunch of sending domains.
I got an issue with the nameservers and DNS on Plesk. I want to be able to put my other domains on the nameservers of the domain jancoz.com but something seems to be wrong. I carefully followed tutorials about how to create nameservers with Plesk ....
Screenshot of DNS settings in Plesk: [URL] .... Screenshot of DNS direct at registrar: [URL] .... Screenshot of nameserver creation at registrar: [URL] ....
I have followed the instructions here to send Plesk notifications through External SMTP (overuse, new domain creation, etc): URL....Here is the error I see in the panel.log: ERR [panel] Unable to send mail.
Is there another log that I'm missing with a more detailed error? Sending through an external SMTP works fine on sites hosted on the same server (Wordpress, Joomla).
Outlook 2013 complains about the SSL certificate when using email. Installing the certificate still doesn't stop the error/warning. What are my options?
Can I install on the plesk server a self-signed SSL cert and avoid the issues? Can I buy & install a single certificate for that one domain and resolve the issue but not affect others. Do I need to buy a SAN certificate for the whole server?
Seems if I want to back up a domain's emails to a remote server (3x a week) I might be able to accomplish that with a Scheduled Task / Cronjob? I have a weekly full domain backup from the Plesk scheduled backup. But I can only set one backup per client. So I'd like to backup email separately, several times a week.
I have upgraded to a new server and need to move all domains, users, and most important all email accounts to the new server.
Both servers run Plesk 11.0.9 on CentOS. The migration manager works great, no problems with that.
After migrating, I change my DNS settings at an external DNS provider to the new IP. The problem is, DNS changes take time. I then get emails on the old server and on the new server until DNS information is spread.
I was searching for a way to let the old server forward to the new one, but changes for specific domains in plesks DNS system (MX record) on the old server did not work. The mails still arrived at the old server.
What can i do? Can I uncheck "Activate mail service on domain" and will all emails be rejected until DNS points to the new server? Or will that lead to bounces?
Have Plesk 12 in Centos...all working fine...but I have assigned dedicated IP for one domain, have request certificate (as admin) for this domain, purchase certificate in Comodo and installed...this certificate working fine and SSL Checker is good...problem is in domain how have assigned this certificate in menu SSL not appear...
I have only Default Certificate (certificate Plesk self signed) and Not Selected...but name for real certificate CA not appear...in Admin IP Address have all ok...IP for this domain and certificate (name of certificate installed) and website.... With this problem is normal? How configure SSL for email?
What happens to subscriptions which automatically suspended because of overused monthly bandwidth , at new month ? do they automatically activate or we should activate them manually ?
And does the monthly bandwidth counter reset at first they of new month or it reset 30/31 day after subscription creation date?
Server configuration: CENTOS 5.3 x86_64 cPanel 11.24.4-C35075 - WHM 11.24.2 - X 3.9
Is it possible to write a script that will be sending notifications on user e-mail, that is already pre-configured in their account, whenver user will log in to FTP.
Are there any pre-made scripts or if not, any hint's on writing something like that?
Run a small but fast-growing social network and we're getting to the point where our email notifications (e.g., SoAndSo Added You as a Friend) isn't scaling and we need to find an alternative solution. We're going to be sending out 1,000+ notifications a day and one option would be to run Postfix (or something similar) on our servers. Of course the challenge with this is message delivery. Our concern is that even if abide by strict protocols and give our people unsubscribe options we'll still get listed as Spam. Some of the hosted services seem to have solutions that help with this given that they have good relationships with major ISPs, email hosts, etc.
It is possible to have anti-virus and anti-spam enabled by default when we go to "CREATE E-MAIL ADRESS" -> "SPAM FILTER" / "ANTI-VIRUS" is always disabled.