Automatic Parallels Plesk. 12.0.18 has stopped working but no solution from plesk yet? I think every user has the same problem. Many people asked the same question but no solution/answer from plesk.
View 13 Replieson one of our Plesk-Servers (Plesk 12.0.18 Update 34 on Debian 7.6) the scheduled backup stopped working. Scheduled Backup is active in Backup-Manager, but it's not executed.
View 2 Replies View RelatedI am getting this error after installing the AfterLogic WebMail Pro_7 app on a domain.
I removed the app but AfterLogic still appears in the list of available Webmail options. I am getting the error even after changing all my domains to use Roundcube.
backup_info_1406131330.xml:
Line 423 error: Element 'external-webmail': This element is not expected.
My backups since the day I installed that app are no longer valid.
I have recently migrated my websites from Plesk 11.0.9 to a new server with Plesk 12.x and the webalizer is not working.
- Is there a chance to repair it and not loose the data? If yes, how do I do that?
- Or do I have to remove it and install Webalizer again? How do I do that?
OS Ubuntu
Uninstalling Webalizer with plesk updater is not possible.
After executing this:
Code:
# /usr/local/psa/admin/bin/statistics --calculate-all
I get:
Code:
WARNING during statistics_collector execution: : Executing logs preparation...
error: error creating output file /var/www/vhosts/system/domain.tld/logs/error_log.1: File exists
statistics[6845]: Unable to execute logrotate via: /opt/psa/logrotate/sbin/logrotate /opt/psa/etc/logrotate.conf -s /opt/psa/var/logrotate.status
i have setup fresh Centos 6.5 with Plesk Pannel 12.0.18. When i execute the attached command from the console, i get it work, some posts are auto created within wordpress. When i enter the attached command within Plesk (Tools / Settings - Taskmanager - root New Task, the command is not executed...
/usr/bin/wget --post-data='id=4&minposts=1&maxposts=3' -O /dev/null http://www.mydomain.com/wp/wp-content/plugins/WPRobot3/cron.php?code=UNIQUEID
I tried also without /usr/bin at the beginning, but its not working with cron automatic
I am running Plesk 12 . Centos 6.5
I have Plesk Firewall Installed.
After the Plesk Firewall was enabled the FTP Stopped working in passive Mode.
I searched the net and found the following :
Code:
/etc/sysconfig/iptables-config and change the line with IPTABLES_MODULES to: IPTABLES_MODULES="ip_conntrack_ftp"
It started working.
I changed the default FTP port from proftpd.conf
Code:
port 2392
and /etc/services
Code:
ftp 2392/tcp
ftp 2392/udp fsp fspd
I allowed the new port in Plesk Firewall in Incoming connection and disabled port 21
Now I am not able to connect to the ftp, I get the following error. Have I missed anything ?
Code:
Response:257 "/" is the current directory
Command:TYPE I
Response:200 Type set to I
Command:PASV
Response:227 Entering Passive Mode (85,25,51,34,216,46).
Command:MLSD
Error:Connection timed out
Error:Failed to retrieve directory listing
I'm not been able to start plesk although web and mail services are running.I'm getting the error unable to execute php_handlers_control.I've patched and updated plesk with command line and bootstrap repair and I'm getting this errors:
==> Checking for: mail_responder_restore... fail
/usr/lib64/plesk-9.0/mail_restore: line 820: 17063 Illegal instruction /usr/local/psa//admin/sbin/mailmng-service --restart-service
Errors occured in mail restore procedure
Some utilities have exited with errors:
/usr/lib64/plesk-9.0/mail_auth_dump
/usr/lib64/plesk-9.0/mail_responder_restore
I get Illegal Instruction When I run :
# /usr/local/psa/admin/sbin/mailmng-service --restart-service
Illegal instruction
Also I switched from postfix to qmail and back using the command line with no luck.
/usr/local/psa/admin/bin/mailmng --features
runs without problems.....
/usr/local/psa/admin/logs/panel.log:
[06-Apr-2015 12:47:25 America/New_York] PleskUtilException: '/usr/local/psa/admin/bin/php_handlers_control' '--list-json' failed with code 4.
[code]....
Ii got the following error during automatic Backup:
Unable to rotate dump: The dump rotation is failed with code '1' at /opt/psa/admin/bin/plesk_agent_manager line 1041.
I used Plesk Version 12.0.18. The Backup is created, but i following this error Message.
After Plesk panel upgrade to 12.x webadmin stopped working . It's showing following error
Code:
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.
Since moving to version 12 on the remote FTP backup is not working.
This makes the tar of 50K ~
We have chosen "Setting and content domain" ...
I am running Plesk 12 on CentOS 7 64bit. I have set up the server backup instead of the website backup as I assume that will backup all server settings, as well as the website? I am running Plesk Web Admin Edition.
I have the backup set to run and dump into Personal FTP, but it does not run. If I run the backup manually, everything works great, but the scheduled backups don't work.
I have the same problem again with plesk 11 [URL]
workaround
1) rpm -q --scripts psa-backup-manager | sed 1d | sh
2) /etc/init.d/crond restart
my error message with CentOS 5.8, Plesk 11.0.9 MU#4
sh: line 2315: syntax error near unexpected token `('
sh: line 2315: `preuninstall scriptlet (using /bin/sh):'
/etc/cron.d/plesk-backup-manager is created
why do not work after you upgrade the backup cronjobs?
Can ftp to the FTP server from the command line without any problem.
get / put / ls etc all work.
Configure Plesk Backup Personal FTP repository with same server / username / password.
Get the following messages in Plesk:
Warning: Unable to display the list of backups. Please check the personal FTP repository settings.
When I attempt an FTP backup I get:
The backup was not created. Download the log file View the log Close this message
Can't upload file 'backup_info_1406281533.xml' to ftp. Error code: 1
This is on a CentOS 7.1, Plesk 12. New.
On Plesk 10.4 I had a script that backed up my MySQL databases separately. The script doesn't work now. I get an error:
ERROR 1045 (28000): Access denied for user 'admin'@'localhost' (using password: YES)
Do I need to do something different with this new "MariaDB" thing?
Here's the script:
DB_BACKUP="/pat/to/databackup/`date +%Y-%m-%d`"
DB_USER="admin"
DB_PASSWD="-p`cat /etc/psa/.psa.shadow`"
HN=`hostname | awk -F. '{print $1}'`
[Code] ....
We uploaded one .Net application and one Java Web application to Parallels server.
.Net application is configured by default.
Our Java web application has JSPs and Servlets.
With respect to our Java web application we are able to access the JSPs but any request to Servlet is not hitting the Servlet.
We are able to access either static JSP/HTML pages ONLY. But we need to process Servlet requests also.
I'm running: 12.0.18 Update #29
I'm having troubles getting the global scheduled backup task to work at Home > Tools & Settings >Backup Manager > Server Repository.
At a subscription the scheduled backup works how it should.
Home > Subscriptions > example.com > Websites & Domains > Server Repository
The problem is as follows: When I set the scheduled task at a specific time example 00:00 it does not run at all. But when I just do "Create a backup" it does work...
I've done [URL] .... and everything in here is configured how it should be.
This is my configuration for scheduled task:
Cronjob is placed in : /etc/cron.d/plesk-backup-manager-task
Also did run: rpm -q --scripts psa-backup-manager | sed 1d | sh
This problem is only in the global backup configuration.
is there any way to disable automatic updates completely ? Because the lowest option in the panel is:
"Notify me about available updates but do not automatically install them" (Critical security updates will still be installed automatically.)
And while I can't figure out, which files are going to be updated even on this minmalistic setting, I have to disable it completely.
Does Parallels support Plesk 12 being installed on a Linux VM that is provisioned on Microsoft Windows Server 2012 R2 Hyper-V?Is it fully supported?
View 2 Replies View RelatedWe have over 50 WordPress installations with us on the server. Everything works very well. Only a WordPress there are problems. For automatic updates, we receive only:
Code:
Decoding failed: Syntax error
During the installation procedure, the script stopped unexpectedly
Errors were encountered while processing:
/var/cache/apt/archives/psa-proftpd_1.3.5-ubuntu14.04.build1200140604.16_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
The FTP on my VPs running centos 6.6 and plesk 12.0.18 Update #44 has stopped allowing FTP conections via filezilla or dreamweaver. My tech knowledge with server management outside of the gui is minimal but i have done the following. Checked that the firwall is allowing ftp traffic through the GUI in plesk.
restarted xinetd and checked status
[root@367549 ~]# service xinetd status
xinetd (pid 11707) is running...
[root@367549 ~]# lsof -i tcp:21
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
xinetd 11707 root 5u IPv6 682472 0t0 TCP *:ftp (LISTEN)
Then tried the following
[root@367549 ~]# ftp localhost
-bash: ftp: command not found
But i can connect via telnet on port 21
when trying to use +dreamweaver or filezilla i get the following. This may be due to one or more of the following reasons: - The network cable is unplugged or the network is down. Please verify that the network cable is connected and that the network is up. - The FTP server is down. Please verify that you can connect to the FTP server using another FTP program. - The FTP host name is incorrect. Please verify that the host name is correct in the Site definition dialog box. - Accessing the server requires proxy settings that aren't properly set. Please verify that the proxy settings in the Site category of the Preferences dialog box are properly set, and that the Use Proxy option in the Site definition dialog box is selected. - You may need to connect to the server using a different port than the one provided. Please specify the correct port in the box provided.
Error: The data connection could not be established: ETIMEDOUT - Connection attempt timed out
Error: Connection timed out after 20 seconds of inactivity
Error: Failed to retrieve directory listin.
What to do and why after no change this just stopped working when ive been using ftp on this server previous.. the company that i brought the vps from have no intrest and tell me its unmanaged.
I recently changed the main domain url from website.com to www.website.com, this resulted in 404-errors when i navigated to wordpress...
I found a solution on the internet and updated the records with phpmyadmin [URL] ....
When I click on Login at the the WordPress Installations I'm still being navigated to the old website url. It supprices me that there is no option to change it on Plesk level after wordpress is deployed.
How can i change or update the wordpress path once it is installed in Plesk?
I'm using CentOS 6.2, maybe there is a config file or an database for Plesk?
Buy the new Dedicated Server Self-Managed Dedicated Servers - Self-Managed - Intel Xeon E3-1240v2 Quad Core But i don;t have cpanel installed in my server i had now Managed VPS Server with whm panel had only 1 site [URL] .... don't have too much data i m facing server issue problem they request me to buy dedicate server i buy self manage server it cost me less but now i search on google alternative whm i find parallels but i m new here don;t know how to install and transfer it WHM tO Paralllels plesk panel
View 4 Replies View Related is it safe to Upgrade Parallels 11.5 to 12 from the panel
OS
CentOS 5.10 (Final)
Panel version11.5.30 Update #48, last updated at Nov 21, 2014 02:33 PM
Tools & settings > plesk > updates & upgrades.
I tried to open updates & upgrades, with above flow, using the same username and password to log in the panel, on :8443, but the page said the username or password is not valid. attached screenshot....
I'm new user for parallels and plesk. I new install plesk 12 for my hosting provider but i have problem step by step integration whmcs.
View 2 Replies View RelatedOur partition become full and drop the vps, after that we are unable to start postifx, actually postfix start but master not.
So if I run :
/etc/init.d/postfix restart
Shutting down postfix: [FAILED]
Starting postfix: [ OK ]
/etc/init.d/postfix status
master is stopped
I already try to reconfigure all
/usr/local/psa/admin/bin/mailmng-service --start-service --mail-component=all
Into ToolsSettings i change between qmail and come back again to postfix (reinstalling)...
I've this terrible problem: on my site I start a script that executes a batch process that imports into the Mysql database a lot of products (texts and images). I'm monitoring the query process from Phpmyadmin>Status and I notice that after some minutes the number of queries decreases from ~900 to ~30, that means that the script is stopped! Then I check the error_log and infact there's this error:
[Thu Oct 02 17:09:34 2014] [warn] [client xxx.xxx.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Thu Oct 02 17:09:34 2014] [error] [client xxx.xxx.xxx.xxx] Premature end of script headers: insert_products.php
Some informations:
VPS server: 1 CPU; 40gb; RAM 1GB
OS: CentOS 6.5 (Final)
Plesk version: 12.0.18
What I tried via SSH console:
# /usr/local/psa/admin/bin/php_handlers_control --list
id: display name: version: type: cgi-bin: cli-bin: php.ini:
module 5.3.3 5.3.3 module /usr/bin/php-cgi /etc/php.ini
fastcgi 5.3.3 5.3.3 fastcgi /usr/bin/php-cgi /etc/php.ini
cgi 5.3.3 5.3.3 cgi /usr/bin/php-cgi /etc/php.ini
# /usr/bin/php-cgi -v
[code]....
I just installed Nginx. It seems it works well, but watchdog reports it as "stopped".I restarted watchdog several times, and it always says the service has stopped.What shall I do to make watchdog see Nginx as a working service?
Following this KB [URL] ...., I can confirm that command "/usr/local/psa/admin/sbin/nginxmng -s" return "Enabled".
I have Parallels Plesk Panel v.11.5.30 on CentOS (Linux version 2.6.32-431.3.1.el6.x86_64) and I get error message whenever Plesk tries autoupdates.
Problem started to appear just after I updated server with atomicorpURL....When I try to update manually through console (yum update) I get following error:
Code:
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA1 Signature, key ID 4520afa9: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY.art.txt
The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.When I try to update any component manually through panel I get following error (This is for Apache web server support):
Code:
Installation started in background
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile
* atomic: www7.atomicorp.com
* base: mirror.checkdomain.de
* extras: mirror.checkdomain.de
* updates: mirror.checkdomain.de
[code]....
Fatal error during packages installation: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.YumBaseError: The GPG keys listed for the "CentOS / Red Hat Enterprise Linux 6 - atomicrocketturtle.com" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository. Error: Failed to run the Yum utility.The Yum utility failed to install the required packages.Attention! Your software might be inoperable.
I have a new 1 and 1 hosting account and have reimaged to have Plesk Panel 12 as I have used Plesk with another virtual server account.
However I do not know how to install the mail server.
Is there a simple way to install the mail server so I can set up pop mail boxes?