Is there anyway to integrate an external version (not installed through plesk) of Tomcat, so that requests to port 80 are redirected to port 8080 (i.e. if I hit www.example.com I would like to see the same content as www.example.com:8080)?
View 2 RepliesI am going to buy Plesk V.12 but there is some question that I would like to confirm before ordering this great program. My server is running both tomcat and php at the moment and using forwarding port technique. I am not quite sure about how Plesk manage this solution.
View 7 Replies View RelatedThis questing in regards to a web hosting setup using Windows Server 2012 and the latest version of Plesk for Windows (web host edition). The server will be used for hosting whitelabelled reseller accounts.
I understand that the Plesk supports 3rd party DNS providers such as GoDaddy Premium DNS or Amazon Route 53. If I go with either one of those providers for my DNS solution using Plesk, do you know if my reseller customers will be able to use their "Private Name Server" (example. ns1.theirdomain.com, ns2.theirdomain.com)?
I know the Windows OS comes with a DNS built-in, etc. I prefer "not" to host my own DNS server(s) for security, additional cost and other administrative reasons. So, I want to know if any of you out there use external DNS within Plesk successfully for the above setup?
I want to add a submenu under navigation with link to a page on external website, how can I do that?
It allows submenu to the pages on my website only.
The Setup:Plesk Server hosting domains
The Goal:Have Plesk Accounts on it's server be able to sync to an external SmarterMail server, rather than installing SmarterMail on that same serve (which seems to be available natively).
When I attempt to go to Tools & Settings > External Services > View Services I am redirected to [URL] .... where the page attempts to load for around 2-3 minutes at which point I receive the error :
"Error: Error validating license."
I have checked the logs and event viewer but see no warnings or errors related to the issue. As far as I can tell it is a problem on Plesks side as it seems that the handoff from my panel is already done.
I have Plesk Panel installed in server 1 and mailenable in server2. I disabled mail service in server 1 and configured external mail (by the way, I cannot start it back) - Tools & Settings -> Mail -> External SMTP Server to my server 2.
Every contact form created with Presence Builder never worked, and I do not know why. Is there any work around? When Plesk is going to handle e-mail forms with a PHP file?
I'm looking for information about having EXTERNAL ms-sql 2008/2012 servers with MS-SQL Web Edition license connected to one or more Plesk servers.
We don't want to use the Express version coming with Plesk but use MS-SQL 2008 & 2012 (both accessible by clients if possible), on individual dedicated machines for SQL only.Of course we'd like to have all current functionality coming with Plesk Power Panel inc. backup/restore options from within Plesk.
We are trying to use a configure settings for an external SMTP server within Plesk (Windows 2008 R2 Plesk 12) but are receiving the following error message:
Error: Unable to encode IDN email address 'username': email address is invalid
We are trying to use a username for SMTP authentication as we do not have the option of using an email address with our current SMTP relay provider.
Is there any way around this so that we can use a username rather than an email address?
I recently signed up with a reseller hosting account who told me that if I want to automate the domain registration with my WHMCS. -
"If you want to integrate it into WHMCS however to automate it, use the domain registration module "Net Earth One" "
now I consider myself a techie and can usually find stuff out on my own but this is killing me. I can't find one documentation on how to this "integration".
Where do I find this "module"? do I download this then install to WHMCS?
I am running Plesk 8.1 for Linux and am trying to delete a domain via the control panel. The following error occurs:
ERROR: PleskUtilException
tomcatmng is failed --remove-service --vhost-name=domain.com
0: /usr/local/psa/admin/plib/utilmng.php:57
utilmng->call(string 'remove-service', array)
1: /usr/local/psa/admin/plib/tomcatmng.php:44
tomcatmng->remove_service(string 'domain.com')
2: /usr/local/psa/admin/plib/class.DSTomcat.php:226
DSTomcat->delete()
3: /usr/local/psa/admin/plib/class.PhDomain.php:315
PhDomain->reset(integer '0', boolean true, boolean false)
4: /usr/local/psa/admin/plib/class.BsDomain.php:297
BsDomain->reset(integer '0')
5: /usr/local/psa/admin/plib/class.BsDomain.php:291
BsDomain->delete(integer '0')
6: /usr/local/psa/admin/plib/class.BsDomain.php:530
mdeleteDomains(array)
7: /usr/local/psa/admin/plib/class.Manager.php:353
Manager->removeDomains(array)
8: /usr/local/psa/admin/htdocs/domains/domains.php3:209
Does anyone know how to fix this? Some Plesk users may have experienced this and I'm hoping could shed some light.
I run a server with Plesk 11.0.9 and want to add Tomcat support. I installed the "Tomcat Java Servlets support", but can't start the service in the "Services management" tool. It does not show any button. How do I do the next step to run tomcat in plesk?
View 2 Replies View RelatedTrying to enable Tomcat Java Servlets using autoinstaller via ssh, but I'm receiving the following error:
Exception: Failed to solve dependencies: 2:apache-commons-discovery-0.5-9.el7.noarch requires mvn(commons-logging:commons-logging)
ERROR: The Yum utility failed to install the required packages. Attention! Your software might be inoperable. When I try through the admin UI, I just get "The Yum utility failed to install the required packages"
Do you guys know where to get Plesk licenses for windows on the cheap? colo place does not offer it.
View 3 Replies View Relatedhow can I setup under plesk to allow a external server to access the mysql db.
View 7 Replies View RelatedI get the following message if i try to migrate a domain from a Windows Plesk (9.5.5) to PPA:
[2014-04-22 11:25:39] [ERROR] check-infrastructure/mydomain.com| The mssql database DATABASENAME from SourceSQL:0 will not be copied to external DB server at x.x.x.x:1433 - this is not implemented.
But this should have been fixed in MU#4 as mentioned in [URL] ....:
[-] Users could not migrate to PPA 11.5 if PPA used an external Microsoft SQL Server (which was added through Infrastructure > Database Servers). (PPA-771)Click to expand...
The sql server I have my users use is on a different server from which plesk is installed. Plesk should include the size of the user's databases from the external server as well otherwise the user can have a database as large as he wants. It's no longer restricted by the plans limits.
View 7 Replies View RelatedIn PP12 all the add new domain buttons link to the Parallels shop page to purchase etchings like SSL certs, Domain Regitsrations, etc.
How do I tell PP to link to my WHMCS cart to order such things?
I am currently unable to access the Plesk control panel except from the web server itself. When I try any of the following options, all work on the server itself but externally all I get is the default Tomcat page.
https://server_name:8443
https://anydomain.com:8443
https://local_ip_address:8443
https://external_ip_address:8443
I don't know if the problem is on the server itself or something within our firewall - we use Microsoft Forefront TMG. The port 8443 is open, and the Tomcat page is being served. All websites working fine, both internally and externally. The server itself is in a DMZ on the network.
The server is running Centos 7 with Plesk 12.
I just noticed that when adding a new domain, I am warned that the domain resolves to another IP address - the external one. Currently, the IP address set up in Plesk is the internal (192.168...) address. Could it be that I need to change this to the external?
Plesk 12.0.18 #27
CentOS 7.0.1406
I have followed the instructions here to send Plesk notifications through External SMTP (overuse, new domain creation, etc): URL....Here is the error I see in the panel.log: ERR [panel] Unable to send mail.
Is there another log that I'm missing with a more detailed error? Sending through an external SMTP works fine on sites hosted on the same server (Wordpress, Joomla).
I can receive email from all accounts and all domains.
The problem is that when sending an email to an external email (gmail., hotmail, outlook.com .... etc) this is sent to mail queue and do not leave that place.
I am looking to add a mysql external source to my plesk. So far no difficulty.
My question is if I remove the mysql server where the currently plesk. I have to say to the panel get the information (psa, roudcube, horde) on the remote mysql to invez mysql local server?
I'm using a 1blu.de vServer. On my VPS is Plesk 11.5 with centOS 6 installed. I created my Webspace [URL] .... and removed the Mail Services and activated the MSMTP plugin because I'm using the webserver from the hoster 1blu.de.
I activated the Firewall with the "allow any connection" rule.
In Plesk Tools & Settings > External SMTP Server I filled in the server informations smtp.1blu.de password & username. I checked all three boxes -> SMTP needs auth, allow user scripts ...
I installed Wordpress 3.9.2 with a Theme that uses PHP Mail function. The contact form is not sending any messages out. So I tried other php mail scripts but it doesn't work.
[URL] ....
Code:
<html>
<head><title>PHP Mail() test</title></head>
<body>
This form will attempt to send a test email. Please enter where this test should be sent to
<br><p>
<form action = "sendmail.php" method = "post" name="sendmail">
Enter an email address: <input type = "text" name = "to"><br>
<input type="submit" value="Send" name="submit"><input type="reset" value="Reset" name="reset"><br><p>
[URL] ....
Where can I find the log file that could give me information?
I just want to use php mail for my wordpress contact form and for a project application.
I'm not sure if it's a technical or a license issue. When I try to retrieve external services, such as purchase an ssl certificate or buy an application; I see the the following error: "Error: Error validating license."
For example: If I click on 'Tools and Settings' > 'External Services' > 'View Services' , the browser redirects to [URL] .... (as it should) and then gives me the license error. I have re-retrieved my license key, and even downloaded and reinstalled it from the Parallels Partner Channel and the problem persists. When I check the license key status from the Panel it says, "Key Update Status: License key PLSK.02557481.0016 is up-to-date." Everything else is working fine.
I am running Plesk version 12.0.18 Update #37 on Centos 6.6
I want to save the access logs of our websites on an external server. If I do this now with the default setup, the gets overwritten every day. The desired file name format whould be: websitedomain-tld-access-2014-10-24.log
How can I tell Plesk to do this and how can I make sure the statistics keep working?
On our other servers we use rotatelogs for this.
I am currently running a trail of plex to see if it meets our requirements.
My domains are currently being hosted by an external provider and I have made the dns entry to point it the the server running plesk.
Now we can access the site created through plesk but the emails are not working not the webmail or even trying to forward the mails.
I have Plesk 12 on CentOS 7. I have only MSMTP installed not Postfix or Qmail. No matter what settings I use in the external SMTP settings the mail is never sent and I cannot find any error logs.
I have tried gmail smtp, sendgrid smtp and another smtp server that I own.
This is not a firewall issue as far as I can tell since if I install postfix it just works. Also any Wordpress or Joomla installs that use SMTP settings with gmail or sendgrid work just fine.
Screenshot for information only. I used accurate usernames, passwords, etc.
↑
Quick update. I tried the recommended CentOS 7 with the same result. Can installing Plesk 12 without a mail server and using the msmtp relay option actually works?Click to expand...
Plesk delivering email locally to a not existing mailbox instead of sending it to an external party. First I was using a local mailbox, but my client wanted to control the email using their own server. So I've changed the MX records to this new server. Deleted the inbox in Plesk and turned off Mail support for this domain.
New situation: DNS server for domain.com is hosted on a different location and points to my Plesk server for the website and the MX records point to the clients server for the mail.
Email send from email addresses like gmail are send correctly to the clients server. Email addresses from my PLesk server and forms from the website are send locally.
I've a box running Linux Plesk 12.0.18 + Postfix and hosting mydomain.com. Email service is hosted by an external provider.
The problem is that I can't write to postmaster@mydomain.com because Postfix tries to deliver it locally.
What I've already done:
Configured MX record on DNS to point the external provider's server.
Disabled mail service for the TLD from plesk panel or with:
/usr/local/psa/bin/mail --off mydomain.com
The problem still remains.
I think I'm facing on Plesk 12 the same problem described here and elsewhere on this forum for Plesk 9: [URL]
I want to develop a package for Parallels Plesk Automation to introduce some services like backup email, database, websites. I want to know whether it is possible with Parallels Plesk Automation and if so any links to developers site/documentation.
View 2 Replies View Related