I have mail-addresses with mailbox turned OFF and Forwarding switched ON.
The user can receive emails but can't use SMTP to send email. I expect that users without mailboxes can send messages, like in Plesk 9.5.
Error: No such user 'info@example.com' in mail authorization database
CentOS 6.4 + Plesk 11.0.9 Update #45
I have two sites that register a high amount to SMTP traffic. Both sited have only forwarding email addresses.
Do forwarding addresses accumulate SMTP traffic on the log?
Also, if a forwarding email is created without a mailbox is it necessary to add a password so that "others" cannot use the blank SMTP server to send email out?
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk, 11.5, .30_build115130819.13, Debian 7.0, Intel 64bit
PROBLEM DESCRIPTION
When triggering the events 'Mail account created' or 'Mail account modified' the returned variable NEW_MAILBOX will always state TRUE regardless of the mailbox option being ticked or not ticked on the 'New mail account' option located on the 'Mail' tab of a subscription.
STEPS TO REPRODUCE
1: Log in to plesk.
2. Select 'Tools & Settings'
3: Select 'Event Manager'
4: Select 'Add New Event Handler'
5: Select Event 'Mail account updated'
6: Enter in '/usr/bin/php /root/scripts/dbmail/mail_mod.php' to the Command box.
[Code] ....
ACTUAL RESULT
[NEW_MAILBOX] => true
EXPECTED RESULT
[NEW_MAILBOX] => false
ANY ADDITIONAL INFORMATION
I submitted this with parallels support and they stated that the variable NEW_MAILBOX will always return as TRUE regardless of if the mailbox option is ticked or not. They also stated the NEW_MAILBOX variable will be true regardless of any action taken on the panel with mail accounts.
The actual documentation on this variable is very sparse
Component name/description Old component value New component value
Mailbox old_mailbox new_mailbox
We previously had some code that would trigger on this variable and would create a mail account on our mail server with or without a mailbox.
if (!strcmp(getenv('NEW_MAILBOX'),"true") && !strcmp(getenv('OLD_MAILBOX'),"false")){
//Create a mailbox on the external mail service
}
if (!strcmp(getenv('NEW_MAILBOX'),"false") && !strcmp(getenv('OLD_MAILBOX'),"true")){
//Create a mail forwarder on the external mail service
}
At some point this variable has stopped working with newer versions of plesk. Having a variable that is always true regardless of what is done when creating a mail account seems pointless and requesting a new feature that was already there in older versions doesnt seem like something that should be requested on a new feature request.
QUESTION: Is there anyway to get this functionality restored other than requesting it gets re added via [URL] ....
I update my plesk 11,5 to 12.And I activate (limit control for smtp)After this action the email forwarding fails in all domains of plesk.This is the mail system at host fsyc.org. You can delete your own text from the attached returned message.
Reporting-MTA: dns; fsyc.org
X-Postfix-Queue-ID: 5B51E2E800BC
X-Postfix-Sender: rfc822; rbuila@robertobuil.com
Arrival-Date: Tue, 16 Sep 2014 14:21:10 +0200 (CEST)
[code].....
I have a problem with my Parallels Plesk Panel (v 11.5.30) in CentOS 6.4.
When I try to send an email by RoundCube to an other email address with the same domain (that is hosted in my server) i get this error:
Error SMTP (550): ... "xxxxxx@mydomain.com" (5.1.1 <xxxxxx@mydomain.com>: Recipient address rejected: User unknown in virtual mailbox table)
I know I'm probably doing something wrong, but I cannot get Android KitKat phones to authenticate via IMAP to my Plesk 12 server (straight out of the box). Not sure if it is an issue with standard dovecot config or Android, but the only way I can get them to connect is via pop3.
View 3 Replies View RelatedIn my documents I have command:
# mysql -uadmin -p`cat /etc/psa/.psa.shadow` psa -e "select name from domains" | grep -v 'name' > domains.txt; while read i; do echo $i; /usr/local/psa/bin/domain_pref -i $i | grep nonexistent; done < domains.txtClick to expand...
I have plesk12 set up but when i set a mail (dovecot) password, it gets stored in plain text (which I can verify by running /usr/local/psa/admin/sbin/mail_auth_view ). I would like to change this default setting to be encrypted.
View 4 Replies View RelatedI've setup a domain for mail only (no hosting), with the DNS records hosted on AWS Route 53. Telnet fails for this domain.
View 2 Replies View RelatedI'm using a 1blu.de vServer. On my VPS is Plesk 11.5 with centOS 6 installed. I created my Webspace [URL] .... and removed the Mail Services and activated the MSMTP plugin because I'm using the webserver from the hoster 1blu.de.
I activated the Firewall with the "allow any connection" rule.
In Plesk Tools & Settings > External SMTP Server I filled in the server informations smtp.1blu.de password & username. I checked all three boxes -> SMTP needs auth, allow user scripts ...
I installed Wordpress 3.9.2 with a Theme that uses PHP Mail function. The contact form is not sending any messages out. So I tried other php mail scripts but it doesn't work.
[URL] ....
Code:
<html>
<head><title>PHP Mail() test</title></head>
<body>
This form will attempt to send a test email. Please enter where this test should be sent to
<br><p>
<form action = "sendmail.php" method = "post" name="sendmail">
Enter an email address: <input type = "text" name = "to"><br>
<input type="submit" value="Send" name="submit"><input type="reset" value="Reset" name="reset"><br><p>
[URL] ....
Where can I find the log file that could give me information?
I just want to use php mail for my wordpress contact form and for a project application.
I'm getting multiple smtp mass mail attack, using weak passwords.
Is there a command, a part from
/usr/local/psa/admin/sbin/mail_auth_view
to list only unsecure password?
$request = <<<EOF
<packet version="1.6.5.0">
<mail>
<create>
<filter>
<site-id>34</site-id>
<mailname>
<name>$username</name>
<mailbox>
<enabled>true</enabled>
<quota>1024000</quota>
</mailbox>
[code]....
I write this code for creating mail box, but I get "No mailbox" message in plesk panel. I need to create mailbox.
Since upgrading to 12.0.18 Update #5 i have picked up a strange problem when creating a new email account.
When I try setup and new email account on any domain, I get teh following error message.
Code:
Error: mailmng-outgoing failed: ERROR:outgoing:mails.domain_id may not be NULL
If i click OK, I get the following error message
The specified email address is already in use.
I have to click cancel to return to the email address list, which shows the new email address with NO mailbox.
I then have to open the email address and check the Mailbox option to activate it.
Now the email account is configured correctly.
I have an individual that has moved there "sent box" to the deleted items and yes, has deleted them.
I have not used the restoration feature of plesk so i have a couple of questions before proceeding.
1. Can I restore a specific mail box folder "sent items"
2. If so will it overwrite all the items and only restore whats on the backup, because he has only just noticed and he has about 500 emails from the point he deleted it? or will it merge the items - e.g the 500 he has now + all the others from the back up.
3. If i cant restore a specific folder, does it overwrite all of the current mail from the backup.
Today in a plesk 12 with mail control (20 mails per hour per mailbox) a spammer stole a password of a mailbox and send nearly 1000 mails in two hours.
How can it is possible? Also in the stats I see 0 mails sent. In the logs (var/log/mail.log) I see the spam wast sent from a mailbox...
i have one Mailbox on my server, which i cannot sending mails. I tested it with Outlook and Horde.
For Example, i see this error at the Maillog:
Code:
Jul 14 22:12:13 gaius postfix/cleanup[12194]: 2F653402A6: milter-reject: END-OF-MESSAGE from localhost[127.0.0.1]: 5.7.0 The message could not be sent. You are not allowed to use sendmail utility.; from=<user@server1.local> to=<user2@server.local> proto=ESMTP helo=<gaius.stefanshome.com>
I delete this Mailbox, but after a time, i have the same problem again. On the Plesk Webinterface there is no problem logging with the outgoing spam protection.
how to adjust the mailbox sizes.
i imported ~15 email account during a cPanel migration/transfer done with the manager. mails are there but mailboxes, that had an unlimited quota, are now set to 350MB.
i tried a bunch of stuff, from searching the whole webinterface, changing db entries up to postfix main.cf.
i'm just restoring yesterdays backup. i already lost hours, and now am loosing nerves ..
where can I find this setting, or how can i set it in the DB (chancing max_box and mbox_size did not work, changes in the mail table were reflected on the UI, but not for postifx ..) ?
On the page /smb/email-addresses/list (for each domain) there is a list of email addresses with a usage bar graph on each line.
Last week, all mail was deleted from some of the accounts, but the bar grpah has not updated.
One of the mailboxes shows 495mb, but du on the qmail directory shows it has only 9.
How can I get the Usage column to report correct data?
Plesk 12.x
CentOS 6.6, 64-bit
Is there a way to set the mailbox quotas for all of the mailboxes on a domain, at once? When I set the default, it doesn't change the quotas for existing mailboxes.
I have a script which checks the mailboxes of all clients to notify them when they're reaching capacity.
This does so by checking the psa database for their set limit and matching that to the maildirsize file within the user's Maildir directory.
After upgrading, though, my SQL query no longer works - it was:
Code:
SELECT clients.email as owner_email, domains.id, domains.name, Limits.value AS domain_quota, mail.mail_name, mail.mbox_quota from Limits, clients, domains, mail WHERE mail.postbox='true' AND limit_name = 'mbox_quota' AND domains.limits_id = Limits.id AND mail.dom_id = domains.id AND clients.id = domains.cl_id ORDER BY domains.name ASC
However, on closer inspection, all values in the domains table for limit_id are NULL.
Has this changed in 11.5? Is there an alternative way to quickly get all limits for domains?
After upgrading from 9.5 to 11.5.30 update #47 (CentOS 5.8 (Final) 32bit) i'm getting error when trying to add an email box:
Internal error: SQLSTATE[HY093]: Invalid parameter number: no parameters were bound MessageSQLSTATE[HY093]: Invalid parameter number: no parameters were bound
File Pdo.php
Line234
TypeZend_Db_Statement_Exception
mysql request "select objectId from Configurations where status='error';" gives nothing.
we have a Problem with one of our customers there hosted by Plesk 11.5.30 Update #47.
If a mail was sent to the mail address from our customer, postfix log the following entry:
Code:
/usr/lib/plesk-9.0/psa-pc-remote[28391]: handlers_stderr: DATA Mailbox full#015#012DEFER
/usr/lib/plesk-9.0/psa-pc-remote[28391]: DEFER during call 'check-quota' handler
/usr/lib/plesk-9.0/psa-pc-remote[28391]: Message aborted
The mail Sender will receive a Information with the error message 4.2.2 Mailbox full
But the quota is not exceeded. The quota is 3GB and the assignment is perhaps 20 percent.
We have configured, that we became a mail if the quota from our customer is oversized. But we also become no mail that the quota is oversized.
I am having a Plesk server and when I scanned it with tools like OpenVas, It detected the following vulnerabilities with CVE acronym. As the corresponding ports and services are being controlled by Plesk, I require to patch it.URL....As you can see this vulnerability has been hit on port 106. I checked the Plesk server and found the port 106 being used by service "poppassd". This was nothing I installed and came along with the Plesk installation. Hence just wanted to make sure whether it has a patch from Parallels. As per my investigation this service is used for changing mailbox passwords and I am currently using Roundcube client. How to patch this vulnerability.
As per the solution in pic, the vulnerability "SMTP antivirus scanner DoS" can be resolved by upgrading or installing anti virus for Plesk mail server. I am ready to buy Dr.Web or Kaspersky from Parallels. But wanted to make sure whether any of the above antivirus can resolve the vulnerability.
cat /usr/local/psa/version
11.0.9 CentOS 6 110120608.16
I have my home server Problem is that my isp started blocking port 25.
I Found that many dynamicdns provider have a way to redirect port 25 mail to other ports
I have dns server working Fine. but i m unable to find where to put that redirect port 25 to other posrt.
Also mail server supports imap. but i m unable to recieve imap mails Port of imap is open
I m unablke to recivece emails too even the port 110 is open.
why .
if isp blocks port 25 then pop & imap also stop working?
Server : windows 2003 R2
DNS : MS Dns
Is there any way to auto-delete all the messages in a specific mailbox on a specify domain on a daily basis? Using Postfix.
View 4 Replies View RelatedI have Plesk 11.5.30 Update #47, Centos OS 6.5 x64, MTA Qmail 1.03
Today I encountered a estrange thing, a disabled mailbox was accepting mail but not bouncing it.
In the panel the "user@tld.com" mailbox is disabled, if a email is sent to that address Qmail accepts it:
Jul 4 17:51:35 mx3 qmail-queue-handlers[27432]: Handlers Filter before-queue for qmail started ...
Jul 4 17:51:36 mx3 qmail-queue-handlers[27432]: from=root@mx3
Jul 4 17:51:36 mx3 qmail-queue-handlers[27432]: to=user@tld.com
Jul 4 17:51:36 mx3 qmail-queue-handlers[27432]: handlers_stderr: SKIP
[Code] ....
No mail is bounced, nothing, the message is not in the mailbox.
Tested in several accounts the result is the same, even in a new created account.
When running the repair function to convert mailboxes to lowercase, I immediately receive the following error:
/usr/local/psa/bin/repair --convert-mailboxes-to-lowercase
2014-10-30T00:11:09+01:00 ERR (3) [util_exec]: proc_close() failed
What does this "[util_exec]: proc_close() failed" means and how can I fix this error?
I'm suffer 2 major problem as below :
1.
how to turn off spamassassin completely ?
I've already stop the spamassassin service on Services Management but it's only valid one day. The next day, spam assassin service automatically start
2.
my customer mailbox statistic wrong. Even if their mailbox not full but when they send email. The quota said that their mailbox full. So they can't send/receive email.
Our action :
Manually, use command
/usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f execute-statistics
Today I upgraded to Plesk 12 and during the day I got several customers that had problems with their mailbox size. According to Plesk they were exceeding the size, but they've been doing that for years. The setting that these limits don't have any real meaning is ignored after the upgrade...
View 1 Replies View Related