i imported ~15 email account during a cPanel migration/transfer done with the manager. mails are there but mailboxes, that had an unlimited quota, are now set to 350MB.
i tried a bunch of stuff, from searching the whole webinterface, changing db entries up to postfix main.cf.
i'm just restoring yesterdays backup. i already lost hours, and now am loosing nerves ..
where can I find this setting, or how can i set it in the DB (chancing max_box and mbox_size did not work, changes in the mail table were reflected on the UI, but not for postifx ..) ?
I am having problems with two accounts, I get the following errors:
Code: Failed to copy files storage to destination path. stderr: filemng: Cannot open destination file '/var/www/vhosts/domain.tld/httpdocs/index.html.Chn3rn' System error 122: Disk quota exceeded stdout: filemng: Cannot open destination file '/var/www/vhosts/domain.tld/httpdocs/index.html.Chn3rn' System error 122: Disk quota exceeded
Has anyone ever run into this before? We are running into issues with one of our hosting servers, it claims that the /tmp folder has exceeded the disk quota but when you actually go to the /tmp folder it's not at all.
Here are the outputs:
# df -h Filesystem Size Used Avail Use% Mounted on /dev/simfs 60G 2.4G 58G 4% /
But it still gives a PHP error saying /tmp disk quota exceeded until I completely empty the folder and then it works for a few hours and does the same thing.
my costumer's web site often started to give "This Account Has Exceeded Its CPU Quota" error
his/her logs following.
Code: -------------------------------------------------------------------------------- CPU Exceeded Log For Thu Mar 22 11:55:12 2007
Thu Mar 22 11:52:19 2007: used 0.13 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2 HTTP/1.1 Thu Mar 22 11:52:19 2007: used 0.13 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2&forumids=12 HTTP/1.1 Thu Mar 22 11:53:25 2007: used 0.18 seconds of cpu time for HTTP Request: vbulletin.com : GET / HTTP/1.1 Thu Mar 22 11:52:00 2007: used 0.13 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2&forumids=12 HTTP/1.1 Thu Mar 22 11:51:59 2007: used 0.20 seconds of cpu time for HTTP Request: vbulletin.com : GET /showthread.php?t=289 HTTP/1.1 Thu Mar 22 11:51:54 2007: used 0.12 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2&forumids=12 HTTP/1.1 Thu Mar 22 11:53:35 2007: used 0.07 seconds of cpu time for HTTP Request: vbulletin.com : GET /clientscript/vbulletin_multi_quote.js?v=364 HTTP/1.1 Thu Mar 22 11:52:09 2007: used 0.12 seconds of cpu time for HTTP Request: vbulletin.com : GET /attachment.php?attachmentid=65&d=1168905639 HTTP/1.1 Thu Mar 22 11:52:27 2007: used 0.28 seconds of cpu time for HTTP Request: vbulletin.com : GET /forumdisplay.php?f=12&page=2&order=desc HTTP/1.1 Thu Mar 22 11:53:34 2007: used 0.19 seconds of cpu time for HTTP Request: vbulletin.com : GET /showthread.php?p=2784 HTTP/1.1 Thu Mar 22 11:52:29 2007: used 0.12 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2 HTTP/1.1 Thu Mar 22 11:54:16 2007: used 0.19 seconds of cpu time for HTTP Request: vbulletin.com : GET /index.php HTTP/1.1 Thu Mar 22 11:54:16 2007: used 0.25 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/ HTTP/1.1 Thu Mar 22 11:54:00 2007: used 0.28 seconds of cpu time for HTTP Request: vbulletin.com : GET /forumdisplay.php?f=2 HTTP/1.1 Thu Mar 22 11:55:09 2007: used 0.18 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/cron.php?&rand=65617 HTTP/1.1 Thu Mar 22 11:55:08 2007: used 49.00 seconds of cpu time for [[mysql query]] Thu Mar 22 11:52:31 2007: used 0.13 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2&forumids=12 HTTP/1.1 Thu Mar 22 11:51:57 2007: used 0.12 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2 HTTP/1.1 Thu Mar 22 11:52:03 2007: used 0.15 seconds of cpu time for HTTP Request: vbulletin.com : GET /external.php?type=RSS2 HTTP/1.1
-------------------------------------------------------------------------------- CPU Exceeded Log For Thu Mar 22 12:34:21 2007
Thu Mar 22 12:31:10 2007: used 0.23 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/showthread.php?p=56720 HTTP/1.0 Thu Mar 22 12:33:25 2007: used 0.04 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/images/buttons/collapse_thead.gif HTTP/1.1 Thu Mar 22 12:33:23 2007: used 0.07 seconds of cpu time for HTTP Request: vbulletin.com.com : GET /forum/images/icons/icon1.gif HTTP/1.1 Thu Mar 22 12:33:15 2007: used 0.26 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/ HTTP/1.1 Thu Mar 22 12:33:50 2007: used 2.00 seconds of cpu time for [[mysql query]] Thu Mar 22 12:30:30 2007: used 0.22 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/showthread.php?p=62840 HTTP/1.0 Thu Mar 22 12:33:44 2007: used 0.13 seconds of cpu time for HTTP Request: vbulletin.com : GET /cron.php?&rand=790216 HTTP/1.1 Thu Mar 22 12:32:00 2007: used 0.22 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/member.php?find=lastposter&t=42694 HTTP/1.0 Thu Mar 22 12:33:12 2007: used 0.25 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/ HTTP/1.1 Thu Mar 22 12:34:02 2007: used 0.14 seconds of cpu time for HTTP Request: vbulletin.com : GET /cron.php?&rand=350679 HTTP/1.1 Thu Mar 22 12:33:59 2007: used 0.25 seconds of cpu time for HTTP Request: vbulletin.com : GET /showthread.php?p=2787 HTTP/1.1 Thu Mar 22 12:33:13 2007: used 2.00 seconds of cpu time for [[mysql query]] Thu Mar 22 12:33:54 2007: used 0.14 seconds of cpu time for HTTP Request: vbulletin.com : GET /cron.php?&rand=395167 HTTP/1.1 Thu Mar 22 12:33:35 2007: used 0.17 seconds of cpu time for HTTP Request: vbulletin.com : GET / HTTP/1.1 Thu Mar 22 12:34:19 2007: used 49.00 seconds of cpu time for [[mysql query]] Thu Mar 22 12:34:20 2007: used 0.24 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/showthread.php?p=68933 HTTP/1.0 Thu Mar 22 12:33:52 2007: used 0.28 seconds of cpu time for HTTP Request: vbulletin.com : GET /forumdisplay.php?f=2 HTTP/1.1 Thu Mar 22 12:32:42 2007: used 0.24 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/member.php?find=lastposter&t=41435 HTTP/1.0
-------------------------------------------------------------------------------- CPU Exceeded Log For Thu Mar 22 16:16:16 2007
Thu Mar 22 16:14:00 2007: used 0.18 seconds of cpu time for HTTP Request: vbulletin.com : POST /forum/login.php HTTP/1.1 Thu Mar 22 16:13:35 2007: used 0.32 seconds of cpu time for HTTP Request: vbulletin.com.com : GET / HTTP/1.1 Thu Mar 22 16:14:21 2007: used 3.00 seconds of cpu time for [[mysql query]] Thu Mar 22 16:14:21 2007: used 0.18 seconds of cpu time for HTTP Request: vbulletin.com : POST /forum/login.php HTTP/1.1 Thu Mar 22 16:16:15 2007: used 2.00 seconds of cpu time for [[mysql query]] Thu Mar 22 16:16:11 2007: used 38.00 seconds of cpu time for [[mysql query]] Thu Mar 22 16:14:03 2007: used 0.29 seconds of cpu time for HTTP Request: vbulletin.com.com : GET / HTTP/1.1 Thu Mar 22 16:15:22 2007: used 2.00 seconds of cpu time for [[mysql query]] Thu Mar 22 16:15:24 2007: used 0.24 seconds of cpu time for HTTP Request: vbulletin.com : GET /forum/ HTTP/1.1
An automatic backup in plesk has filled up the disk space in my VPS. It seemed to crash first of all - couldn't access my website, then i tried to restart it. It wont restart and comes up with the error below.
As i can't get into plesk i don't know how to delete these old backup files, seem to be in a catch 22. Help
Jul 17, 2008 01:05:33 PM Start Process Completed Jul 17, 2008 01:05:33 PM Click here to open/close operation details.Start VPS #48606643 Failed Jul 17, 2008 01:05:33 PM Operation start with the VPS(s) VEID48606643 is started. Jul 17, 2008 01:05:33 PM Starting VE ... Jul 17, 2008 01:05:33 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] Jul 17, 2008 01:05:33 PM VE is mounted Jul 17, 2008 01:05:33 PM Setting devperms 20002 dev 0x7f00 Jul 17, 2008 01:05:33 PM Setting devperms 20007 dev 0xac8 Jul 17, 2008 01:05:33 PM Adding port redirection to VE(1): 4643 8443 Jul 17, 2008 01:05:33 PM Adding IP address(es): 212.227.251.151 Jul 17, 2008 01:05:34 PM ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0 Jul 17, 2008 01:05:34 PM bash: line 264: echo: write error: Disk quota exceeded Jul 17, 2008 01:05:35 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] Jul 17, 2008 01:05:35 PM VE is unmounted Jul 17, 2008 01:05:35 PM VE start failed Jul 17, 2008 01:05:35 PM Operation start with the VPS(s) VEID48606643 is finished with errors: #1004 Error invoking vzctl utility: Starting VE ... vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is mounted Setting devperms 20002 dev 0x7f00 Setting devperms 20007 dev 0xac8 Adding port redirection to VE(1): 4643 8443 Adding IP address(es): 212.227.251.151 ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0 bash: line 264: echo: write error: Disk quota exceeded vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is unmounted VE start failed . Failed Jul 17, 2008 01:05:35 PM Complete Process Failed
I'm now with a bit of a problem on my server. I tryied to add a new domain and I haven't counted how many domains I had on my server because I was thinking that plesk would warn me if I was reaching my limitation of domains, so I added a new one...
My license was for 10 domains, and now I have 11 domains so I'm getting an error when I enter my plesk panel. The error basically says that I exceeded the number of domains of my license so I have to buy a new one.
The problem is that when I want to click on the cancel operation button on the bottom of the page I'm constantly being logged out and I cannot cancel the operation, so I'm in a loop right now: "Log in -> get error -> Cancel -> Automatic log out -> Log in"
What can I do to delete one domain completely from my server?
-----Original Message----- From: Provider Co. [mailto:<email>] Sent: <date> To: <customer name> Subject: Notification: Resource limits exceeded by reseller account.
The <account name> account is approaching or already exceeded the limits:However, no exceeded or close to exceeded resources were found.This is in the KB, but no date is on it. Has this been fixed?URL...
I just configured the limit for outgoing mail. It works well, but I have still some questions.
Normally the server sends bounce messages in HTML and in german. They look nice and what is much more important, the users who do not speak english are informed what is going on.
The message that is send, when the limit for outgoing mail is exceeded uses a different template. It is delivered in plain text and after explaining in german that the mail could not be send, it states the reason in english.
Is there any way to edit this bounce message, so that a translation could be added?
I had some users complaining that the server is not working, because they tried again and again to send a mail and kept the counter over the limit. For they did not understand what was causing it.
For some reason one of my customers email accounts seems to have been hacked. My admin account continues to say that the customer has reach over the 30 emails per hour limit. This is the email error:
following customers' domains, mailboxes and subscriptions are reached their limits for outgoing emails for the period:>From Dec/13/2014 05:47. To Dec/ 13/ 2014 06:47
Subscriptions customerdomain.com, the limit is 100 messages per hour 336 attempt(s) to exceed limits from Dec/13/2014 04:31 to Dec/13/2014 05:47
So far it has sent over 5,000 attempted in the past few hours. The customer used gmail to send from domain before, so I've changed their gmail email password. I've also changed the main email password, and the plesk username and password login for the customer. It still continues
I have an individual that has moved there "sent box" to the deleted items and yes, has deleted them.
I have not used the restoration feature of plesk so i have a couple of questions before proceeding.
1. Can I restore a specific mail box folder "sent items"
2. If so will it overwrite all the items and only restore whats on the backup, because he has only just noticed and he has about 500 emails from the point he deleted it? or will it merge the items - e.g the 500 he has now + all the others from the back up.
3. If i cant restore a specific folder, does it overwrite all of the current mail from the backup.
i have one Mailbox on my server, which i cannot sending mails. I tested it with Outlook and Horde.
For Example, i see this error at the Maillog:
Code:
Jul 14 22:12:13 gaius postfix/cleanup[12194]: 2F653402A6: milter-reject: END-OF-MESSAGE from localhost[127.0.0.1]: 5.7.0 The message could not be sent. You are not allowed to use sendmail utility.; from=<user@server1.local> to=<user2@server.local> proto=ESMTP helo=<gaius.stefanshome.com>
I delete this Mailbox, but after a time, i have the same problem again. On the Plesk Webinterface there is no problem logging with the outgoing spam protection.
Is there a way to set the mailbox quotas for all of the mailboxes on a domain, at once? When I set the default, it doesn't change the quotas for existing mailboxes.
I have a script which checks the mailboxes of all clients to notify them when they're reaching capacity.
This does so by checking the psa database for their set limit and matching that to the maildirsize file within the user's Maildir directory.
After upgrading, though, my SQL query no longer works - it was:
Code: SELECT clients.email as owner_email, domains.id, domains.name, Limits.value AS domain_quota, mail.mail_name, mail.mbox_quota from Limits, clients, domains, mail WHERE mail.postbox='true' AND limit_name = 'mbox_quota' AND domains.limits_id = Limits.id AND mail.dom_id = domains.id AND clients.id = domains.cl_id ORDER BY domains.name ASC
However, on closer inspection, all values in the domains table for limit_id are NULL.
Has this changed in 11.5? Is there an alternative way to quickly get all limits for domains?
I am having a Plesk server and when I scanned it with tools like OpenVas, It detected the following vulnerabilities with CVE acronym. As the corresponding ports and services are being controlled by Plesk, I require to patch it.URL....As you can see this vulnerability has been hit on port 106. I checked the Plesk server and found the port 106 being used by service "poppassd". This was nothing I installed and came along with the Plesk installation. Hence just wanted to make sure whether it has a patch from Parallels. As per my investigation this service is used for changing mailbox passwords and I am currently using Roundcube client. How to patch this vulnerability.
As per the solution in pic, the vulnerability "SMTP antivirus scanner DoS" can be resolved by upgrading or installing anti virus for Plesk mail server. I am ready to buy Dr.Web or Kaspersky from Parallels. But wanted to make sure whether any of the above antivirus can resolve the vulnerability.
PROBLEM DESCRIPTION When triggering the events 'Mail account created' or 'Mail account modified' the returned variable NEW_MAILBOX will always state TRUE regardless of the mailbox option being ticked or not ticked on the 'New mail account' option located on the 'Mail' tab of a subscription.
STEPS TO REPRODUCE 1: Log in to plesk. 2. Select 'Tools & Settings' 3: Select 'Event Manager' 4: Select 'Add New Event Handler' 5: Select Event 'Mail account updated' 6: Enter in '/usr/bin/php /root/scripts/dbmail/mail_mod.php' to the Command box.
[Code] ....
ACTUAL RESULT
[NEW_MAILBOX] => true
EXPECTED RESULT
[NEW_MAILBOX] => false
ANY ADDITIONAL INFORMATION
I submitted this with parallels support and they stated that the variable NEW_MAILBOX will always return as TRUE regardless of if the mailbox option is ticked or not. They also stated the NEW_MAILBOX variable will be true regardless of any action taken on the panel with mail accounts. The actual documentation on this variable is very sparse
Component name/description Old component value New component value Mailbox old_mailbox new_mailbox
We previously had some code that would trigger on this variable and would create a mail account on our mail server with or without a mailbox.
if (!strcmp(getenv('NEW_MAILBOX'),"true") && !strcmp(getenv('OLD_MAILBOX'),"false")){ //Create a mailbox on the external mail service } if (!strcmp(getenv('NEW_MAILBOX'),"false") && !strcmp(getenv('OLD_MAILBOX'),"true")){ //Create a mail forwarder on the external mail service }
At some point this variable has stopped working with newer versions of plesk. Having a variable that is always true regardless of what is done when creating a mail account seems pointless and requesting a new feature that was already there in older versions doesnt seem like something that should be requested on a new feature request.
QUESTION: Is there anyway to get this functionality restored other than requesting it gets re added via [URL] ....
I've already stop the spamassassin service on Services Management but it's only valid one day. The next day, spam assassin service automatically start
2. my customer mailbox statistic wrong. Even if their mailbox not full but when they send email. The quota said that their mailbox full. So they can't send/receive email.
Our action : Manually, use command /usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f execute-statistics
