so for over 3 weeks now pc-core.net had some problems with their servers and my accounts were just lost and no one answers my support tickets they just erase them, they disabled my account to support so i can only submit support tickets and click the link on the email.
they told me to email cshelpdesk.com to get my account moved to a new server and cshelpdesk is just telling me im SOL. they dont have access to the server i was at and basically to F off.
is there anything i can do? im basically just being ignored and they dont even have a number to them.
I realize this is an old thread but felt I should put my two cents in as a "host-care" customer.
I quoted out host-care due to the fact I don't actually purchase my hosting from them. They appear to be a provider for other web-hosting companies as I bought my hosting from a seperate vendor. I have also had my account suspended once before due to a problem in my scripting where a while loop continued running.
After 24 hours my site was back up and I had found the error and corrected it. The host-care.com website is the support site for my hosting company and if my hosting company is unable to solve the problem I am able to contact host-care directly.
To me it sounds like the original poster didn't read the TOS before jumping right in and didn't properly test his site before uploading.
All in all I've been with host-care about 2 years now and am happy with them.
On Thursday, I posted a review (on anther host review site)* of H9 which was not very complimentary to say the least. To my surprise on Friday morning I had an email from Ben Gabler the Operations Manager with H9 and his email expressed some concerns about what I had written. He asked if he could call me to discuss my problems and to cut a long story short, we spent 45 minutes on the phone on Friday afternoon and he gave me the impression that he is a guy who is really concerned that all H9 customers get what they want in terms of both price and service.
Ben's call came at a very opportune moment as on Friday morning I had spent several hours with my new hosting company trying to get tech support from a supposedly 24/7 tech support team - it just didn't happen - and 48 hours later, it still hasn't!
He gave me several good reasons to have another go with H9 - none of them monetary! One of the things we discussed at length was tech support. Ben explained to me why they were trying to get customers to use tickets rather than the telephone, the reasons are to long to go into here but I do now believe that for 99% of everyday problems it is actually better to use a ticket system rather than the phone. I am surprised at my own reaction here because I far prefer to pick the phone up than tap away at the keyboard, but as Ben pointed out, with a ticket system, you have a full trail of what was said by by yourself and the person dealing with the ticket - ain't no arguing with that!
I have to say that I was very impressed that he looks at the reviews posted here and he was concerned enough about my complaint to actually do something about it personally.
So, I decided to give H9 another try. During the early hours of Saturday morning, H9 transferred several accounts from the other web hosting company to my H9 account, For the most part the transfers went without a hitch and the one problem there was was sorted within 10 minutes of my seeing and reporting it to H9.
So from a good start to a patchy week, I have come back to being a very satisfied customer.
If no one objects, I'll post regular updates here.
Tim
*I have since tried to add a correction to the review that I wrote but is seems that it can’t be done and I have had no reply to the email I sent to the site’s admins asking to add to the review. That is why this is being posted here.
I have emailed leaseweb's abuse department with a link to one of the biggest french warez forums, they asked me to provide direct links to illegal contents and proof that I own it.
I emailed them links to windows, photoshop, movies, mp3, video games and stated that I don't own those but its clearly illegal. Here is the answer I got from them: "I am only going to take action if I receive a complaint from the legit owner."
I setup Apache 2.2.21 on a Win7 (32-Bit) Desktop with SVN 1.5.6 and WebSVN 2.3.3.
My problem lies with navigating to view the repository thru websvn.
I only want my users to be able to access the websvn thru this url, 'myservername/websvn' but they are able to access it thru other variations of the url, eg.'myservername/WebSvn', 'myservername/wEbSvN', 'myservername/WebSVN'.
I am using CheckCaseOnly but it still does not solve the problem. Here's the code of my config file for websvn,
#Alias /websvn/ "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs/websvn/" <Directory /websvn/> Options FollowSymLinks CheckCaseOnly on #Redirect any requests to this page to the page u want FallbackResource listing.php Order allow,deny Allow from all <IfModule mod_php4.c>
This is for a web/application server running, Windows 2003 Server Professional, IIS, MySQL, MSSQL 2005 Express, Plesk 8.5. The price is about the same.
As posted in a previous thread I noted how I have been hosting with GeekStorage. After a little bit of investigation I found that a total of 593 (possibly more) website where being hosted on the same server as mine. I'm not sure if this is overselling but because I'm new to all this but I'm pretty sure it is.
Now, I'm looking on switching from GeekStorage to someone who doesn't oversell. I would be fine with 10-20GB of storage and >150GB bandwidth. Budget is 5-10$ a month.
my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said
Good morning,
Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh: / etc / init.d / httpd start Starting httpd: [OK]
We see that the port is open 80: netstat-tanpu | grep 80 tcp 0 0 0.0.0.0:7080 0.0.0.0: * LISTEN 3071/lshttpd tcp 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 14349/httpd
From the outside, at this precise moment, we are able to establish a connection on port 80:
Telnet ks357687.kimsufi.com 80 Trying 91.121.148.X ... Connected to ks357687.kimsufi.com. Escape character is'^]'. Get <! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN"> <html> <head> <title> 501 Method Not Implemented </ title> </ head> <body> <h1> Method Not Implemented </ h1> <p> get to / not supported. <br /> </ p> <hr> <address> Apache/2.2.8 (EL) Server at ks357687.kimsufi.com Port 80 </ address> </ body> </ html> Connection closed by foreign host.
If I stop the Apache server:
/ etc / init.d / httpd stop Stopping httpd: [OK]
More than 80 active port or connection possible from the outside:
In this case the connection of the exterior evidemment is not possible:
Telnet ks357687.kimsufi.com 80 Trying 91.121.148.X ... telnet: Unable to connect to remote host: Connection refused
I am using Windows 2003 Enterprise Edition SP1 and i have recently set the computer up to 4GB RAM. I notice a problem occur error :
When I start the computer, Bios detected all 4GB Ram. However, i have checked Total physical memory in General (My Computer-> Properties) doesnot detect all 4GB Ram. it only detect 3GB Ram.
I have checked that this OS support up to 32GB . Why it doesn't detect all 4GB ? What happen to it?
Mainboard : Intel chipset 915GL
I did following the instruction in internet (exactly is Microsoft) is /PAE in boot.ini file. But, it doesnt work.
Yesterday we registerd and created 2 domains in our server. Everything is ok, files uploaded, dns zones created, httpd virtual host created...
The problem is that trying to browse the site trough http://www.site.com redirects me to [url] my main server IP address, this page shows a cPanel Welcome message.
But, using [url], the site is loaded ok, withouth any problems.
DNS zone shows:
Code: ; cPanel 11.11.0-BETA_16977 ; Zone file for site.com $TTL 14400 @ 86400 IN SOA mydns1.wolo.com. admin.hostingserver.com. ( 2007092601 ; serial, todays date+todays 86400 ; refresh, seconds 7200 ; retry, seconds 3600000 ; expire, seconds 86400 ) ; minimum, seconds
site.com. 86400 IN NS mydns1.wolo.com. site.com. 86400 IN NS mydns2.wolo.com.
site.com. IN A IP_ADDRESS
localhost.site.com. IN A 127.0.0.1
site.com. IN MX 0 site.com.
mail IN CNAME site.com. www IN A IP_ADDRESS ftp IN A IP_ADDRESS Apache virtual host code
The email of my client doesnt receive certain emails from certain accounts, including my yahoo.com.ph account. After several tries I received this error instead.
After trying to send mail unsuccedfully several times, this is the error I am getting.
Hi. This is the qmail-send program at yahoo.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out.
: Sorry, I couldn't find any host by that name. (#4.1.2) I'm not going to try again; this message has been in the queue too long.
--- Below this line is a copy of the message.
Quote:
Originally Posted by copy of email
Return-Path: Received: (qmail 90296 invoked by uid 60001); 25 Jun 2007 04:05:27 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com;
After migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:
Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.
I also tried forcing the log rotating for that site, but the problem still there.
Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.
I configured monit to send me email alerts when apache is using too many resources but I cannot receive email alerts. I use Qmail. As for syslog, there is this message:
monit[6473]: Sendmail: error receiving data from the mailserver 'localhost' -- Resource temporarily unavailable
I tried to add for server name the name used in MX record but with the same result. Btw: other things configured in cron (eg. RKHUNTER) send me alerts OK.
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100% //192.etc.9 loads the html file 100% //62.WANIP internally loads my prestige routers control panel //62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
I have a remote XP PC: 172.16.1.5 OpenVPN connection with route added for 192.168.2.0/24 to go via the VPN
Now on the other end the network consists of:
I have a OpenVPN server inside the lan on 192.168.2.245 Its default gateway is 192.168.2.1
I have 3 Windows Servers, 192.168.2.246, 247 and 248. All gateways are set to 192.168.2.1.
I have a ethernet router on the network, 192.168.2.1, it has a route added for 192.168.0.0/16 to go via 192.168.2.245, and route added for 172.16.0.0/24 to go via 192.168.2.245 also). the 192.168.0.0/16 is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.
The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping 192.168.2.246 -t' it will suddenly come alive but only after the RDP connection is made.
Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.
Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?
My server which runs cPanel (license issued touchsupport) is having problems with handling emails.
I use an external DNS provider (editdns.net) only for this 1 particular domain for handling many Records and such. Through their panel, I have added my mail server's record, i.e. "mailserver.tld".
Now there is a problem with one part of the email issue. I have email piping setup and 1 webmail account setup too. These two work flawlessly. No issues with them. But email forwarding and default address doesn't work.
I am confident that the email settings are working right because, when my clients send an email, piping works and my support system creates a new ticket. But the email forwarding/Default EMail doesn't.
Not just that, I cannot even connect to the webmail account I created via POP3. I 100% sure that I used the correct login credentials and also tried the "+" and ":" for the username part. Just doesn't work. But I can access and read my emails via the Webmail (squirrelmail).
All the videos have been uploaded to << link removed >> and in there you will seea flash_video directory, in there should be a html file where you can double click and watch the flash video.
Now go ahead and try it, click on the HTML file and click CONTINUE and try clicking on MODULE 1.. You will see a video play to the left but on the right are bunch of POWERPOINT slides that will appear as the guy continues to speak. THAT DOESNT SHOW..
Our website is hosted by xo.com
Dont know much about the plan since its my 2nd day at the job..
But here is the weird part,
i have uploaded the samething - same exact way to another web host and it plays fine, the PPTs show up fine..
What do you guys think it is?
Before someone asks about uploading methods, i tried filezilla, coreftp and cuteFTP using both ASCII and binary methods. Samething..
We are hosting our software system which do calculation and file manipulation. Now we have Intel Core 2 Duo E6750 and would like to get Intel Core 2 Quad Q6600 to increase our system performance.
Also we have other choice, get Intel Xeon E5405 Harpertown 2.0GHz to replace two above.
I think it is better to have one server box because one box easy to manage than two. Also Harpertown is much faster than these two together.