Windows Doesnt Detected All 4GB RAM

Jun 15, 2007

I am using Windows 2003 Enterprise Edition SP1 and i have recently set the computer up to 4GB RAM. I notice a problem occur error :

When I start the computer, Bios detected all 4GB Ram. However, i have checked Total physical memory in General (My Computer-> Properties) doesnot detect all 4GB Ram. it only detect 3GB Ram.

I have checked that this OS support up to 32GB . Why it doesn't detect all 4GB ?
What happen to it?

Mainboard : Intel chipset 915GL

I did following the instruction in internet (exactly is Microsoft) is /PAE in boot.ini file. But, it doesnt work.

View 8 Replies


Host That Doesnt Oversell

Mar 28, 2009

As posted in a previous thread I noted how I have been hosting with GeekStorage. After a little bit of investigation I found that a total of 593 (possibly more) website where being hosted on the same server as mine. I'm not sure if this is overselling but because I'm new to all this but I'm pretty sure it is.

Now, I'm looking on switching from GeekStorage to someone who doesn't oversell. I would be fine with 10-20GB of storage and >150GB bandwidth. Budget is 5-10$ a month.

View 14 Replies View Related Doesnt Care

Jan 28, 2009

so for over 3 weeks now had some problems with their servers and my accounts were just lost and no one answers my support tickets they just erase them, they disabled my account to support so i can only submit support tickets and click the link on the email.

they told me to email to get my account moved to a new server and cshelpdesk is just telling me im SOL. they dont have access to the server i was at and basically to F off.

is there anything i can do? im basically just being ignored and they dont even have a number to them.

View 12 Replies View Related

Csf Doesnt Allow Out/income Emails

Mar 23, 2009

my forum is VB and its doesnt sent any email for users!

i check the options and everything looks fine ..

my vps had csf firewall installed ..

the csf.conf is

# Lists of ports in the following comma separated lists can be added using a
# colon (e.g. 30000:35000).

# Allow incoming TCP ports
TCP_IN = "53,1116,80"

# Allow outgoing TCP ports
TCP_OUT = "53,80,3306,1116"

# Allow incoming UDP ports
UDP_IN = "1116,53"

# Allow outgoing UDP ports
# To allow outgoing traceroute add 33434:33523 to this list
UDP_OUT = "53,1116"

# Allow incoming PING
ICMP_IN = "0"

# Set the per IP address incoming ICMP packet rate
# To disable rate limiting set to "0"
ICMP_IN_RATE = "1/s"

# Allow outgoing PING
ICMP_OUT = "1"

# Set the per IP address outgoing ICMP packet rate
# To disable rate limiting set to "0"

and the version of csf is

[root@www csf]# /usr/sbin/csf -v
csf: v4.56 (generic)
[root@www csf]#

am useing centOS5 and ssh port 1116

am not useing any of control panel or ftp ...

the email i configured it with services ..

View 12 Replies View Related

Http Doesnt Respond

Jun 17, 2008

my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said

Good morning,

Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh:
/ etc / init.d / httpd start
Starting httpd: [OK]

We see that the port is open 80:
netstat-tanpu | grep 80
tcp 0 0 * LISTEN 3071/lshttpd
tcp 0 0 * LISTEN 14349/httpd

From the outside, at this precise moment, we are able to establish a connection on port 80:

Telnet 80
Trying 91.121.148.X ...
Connected to
Escape character is'^]'.
<! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN">
<html> <head>
<title> 501 Method Not Implemented </ title>
</ head> <body>
<h1> Method Not Implemented </ h1>
<p> get to / not supported. <br />
</ p>
<address> Apache/2.2.8 (EL) Server at Port 80 </ address>
</ body> </ html>
Connection closed by foreign host.

If I stop the Apache server:

/ etc / init.d / httpd stop
Stopping httpd: [OK]

More than 80 active port or connection possible from the outside:

In this case the connection of the exterior evidemment is not possible:

Telnet 80
Trying 91.121.148.X ...
telnet: Unable to connect to remote host: Connection refused

View 9 Replies View Related

Using Www Site Doesnt Resolve

Sep 26, 2007

Yesterday we registerd and created 2 domains in our server.
Everything is ok, files uploaded, dns zones created, httpd virtual host created...

The problem is that trying to browse the site trough redirects me to [url] my main server IP address, this page shows a cPanel Welcome message.

But, using [url], the site is loaded ok, withouth any problems.

DNS zone shows:

; cPanel 11.11.0-BETA_16977
; Zone file for
$TTL 14400
@ 86400 IN SOA (
2007092601 ; serial, todays date+todays
86400 ; refresh, seconds
7200 ; retry, seconds
3600000 ; expire, seconds
86400 ) ; minimum, seconds 86400 IN NS 86400 IN NS IN A IP_ADDRESS IN A IN MX 0

Apache virtual host code

<VirtualHost IP_ADDRESS>
DocumentRoot /home/siteuser/public_html

<IfModule mod_suphp.c>
suPHP_UserGroup siteuser siteuser
<IfModule mod_php4.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"
<IfModule mod_php5.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"

User siteuser
Group siteuser
BytesLog /usr/local/apache/domlogs/
CustomLog /usr/local/apache/domlogs/ combined
Options -ExecCGI -Includes

View 14 Replies View Related

Doesnt Receive Certain Emails From Certain Accounts

Jun 26, 2007

The email of my client doesnt receive certain emails from certain accounts, including my account. After several tries I received this error instead.

After trying to send mail unsuccedfully several times, this is the error I am getting.

Hi. This is the qmail-send program at
I'm afraid I wasn't able to deliver your message to the following
This is a permanent error; I've given up. Sorry it didn't work out.

Sorry, I couldn't find any host by that name. (#4.1.2)
I'm not going to try again; this message has been in the queue too

--- Below this line is a copy of the message.


Originally Posted by copy of email

Received: (qmail 90296 invoked by uid 60001); 25 Jun 2007 04:05:27
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;


Received: from [] by via
HTTP; Sun, 24 Jun 2007 21:05:26 PDT
Date: Sun, 24 Jun 2007 21:05:26 -0700 (PDT)
From: *********
Subject: test
To: sales@*********.com
MIME-Version: 1.0
Content-Type: multipart/alternative;
Content-Transfer-Encoding: 8bit
Message-ID: <>

Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit


View 4 Replies View Related

Webalizer Doesnt Work Using EnsimPro X

Mar 11, 2007

After migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:

Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.

I also tried forcing the log rotating for that site, but the problem still there.

Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.

View 2 Replies View Related

Monit + Qmail Alerts Doesnt Work

May 9, 2007

I configured monit to send me email alerts when apache is using too many resources but I cannot receive email alerts. I use Qmail.
As for syslog, there is this message:

monit[6473]: Sendmail: error receiving data from the mailserver 'localhost' -- Resource temporarily unavailable

I tried to add for server name the name used in MX record but with the same result.
Btw: other things configured in cron (eg. RKHUNTER) send me alerts OK.

View 0 Replies View Related

Perl Script Doesnt Seem To Work On My System

Dec 30, 2007

im using centos and a perl script doesnt seem to work on my system.

it gives an error on this line.

use LWP::UserAgent;
$ua = LWP::UserAgent->new;
$ua->agent("MyApp/0.1 ");

BEGIN failed--compilation aborted at line 8.

is it a problem with my perl or is it an error with the script?

View 6 Replies View Related

Installed Apache Can Access Via LAN IP + Localhost But WAN IP Doesnt Work

Oct 30, 2008

I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.

Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9

This is about where my knowledge stops unfortunately.

I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.

I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.

I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:

//localhost loads the html file 100%
//192.etc.9 loads the html file 100%
//62.WANIP internally loads my prestige routers control panel
//62.WANIP externally does not load a page (cannot be found)

If you need any more info just let me know and I'll get it.

View 0 Replies View Related

15 POSSIBLE Trojan Detected WHM

Aug 3, 2007

i have an site on my server when i open it the kaspersky anti viruss detect there is an trojan in this site .. ( see the picture in the attachment )

and i checked the server from the whm and there is result 15 POSSIBLE Trojans Detected

How i can solve this ?? and remove this trojans .

View 14 Replies View Related

4 G RAM Not Detected By Fedora 7

Nov 27, 2007

We recently setup a server with 4 gigs of RAM and installed Fedora core 7 32-bit version in it. After installing the OS, I have found that Fedora is able to detect only 2 GB and not 4 GB of RAM. I installed the kernel-PAE and kernel-PAE-devel modules and restart the server and made sure that the the OS with the PAE switch starts at boot time. However, the OS still does not detect the 4 GB RAM. Any idea what else can be done apart from installing the 64-bit OS in the system?

View 14 Replies View Related

Ping Doesnt Work Until Remote Desktop Connection Is Made

Nov 14, 2007

I have a remote XP PC: OpenVPN connection with route added for to go via the VPN

Now on the other end the network consists of:

I have a OpenVPN server inside the lan on
Its default gateway is

I have 3 Windows Servers,, 247 and 248. All gateways are set to

I have a ethernet router on the network,, it has a route added for to go via, and route added for to go via also). the is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.

The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping -t' it will suddenly come alive but only after the RDP connection is made.

Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.

Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?

View 1 Replies View Related

No Filesystems With Quota Detected.

Dec 9, 2007

Just installed fresh centos 5 / cpanel and now I get this:

No filesystems with quota detected.

[root@server scripts]# quotacheck -avugm
quotacheck: Can't find filesystem to check or filesystem not mounted with quota option.


[root@server scripts]# /scripts/initquotas
Quotas are now on
Updating Quota Files......
quotacheck: Can't find filesystem to check or filesystem not mounted with quota option.

quotacheck: Can't find filesystem to check or filesystem not mounted with quota option.


How do I fix this?

LABEL=/1 / ext3 defaults,usrquota 1 1
LABEL=/boot1 /boot ext3 defaults 1 2
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
LABEL=SWAP-sda2 swap swap defaults 0 0

View 1 Replies View Related

SMART Error (CurrentPendingSector) Detected

Sep 4, 2007

I got email notice about this:


The following warning/error was logged by the smartd daemon:

Device: /dev/sdb, 1 Currently unreadable (pending) sectors

For details see host's SYSLOG (default: /var/log/messages).


The following warning/error was logged by the smartd daemon:

Device: /dev/sdb, 1 Offline uncorrectable sectors

For details see host's SYSLOG (default: /var/log/messages).

It causes server crash and down.

View 3 Replies View Related

How To Make Sure Email Isn't Detected As Spam

Feb 8, 2008

I'm just working with my first dedicated server and also in the process of coding a new site. Anyway, I've gotten around to emailing users from scripts on my site (Java Servlet). Using Sendmail as the server (with default config) the emails are detected as spam by pretty much everything.

I'm looking for a complete list of things which need to be done to ensure an email isn't detected incorrectly as spam. I've read through various sites etc but haven't found a definitive list of things which should be done. I'm sure this would be helpful for other forum visitors too.

I'm NOT trying to send spam or anything like that but I haven't set up a dedicated server before.

View 9 Replies View Related

Genuine Mails Getting Detected As Spam

Aug 27, 2007

I am using Merak Mail server 8.0.3 (Windows). From past 2 - 3 days many of my users are complaining their genuine mails are going to spam. The value set for antispam is 5 i.e. if antispam value is above it is detected as spam else not spam.

But from past few days which ever genuine mail is detected as spam I have found an very uncommon thing in it. It shows '10.4 FH_HAS_X Has X: header'

The SpamAssassin table shows the following information:

Content analysis details: (16.34 points, 5.00 required)

pts rule name description
---- ---------------------- --------------------------------------------------
0.1 HTML_MESSAGE HTML included in message
0.1 HTML_TAG_EXISTS_TBODY HTML has "tbody" tag
2.2 DEAR_SOMETHING Contains 'Dear (something)'
2.4 BAYES_80 Bayesian spam probability is 80 to 90%
0.0 NO_RDNS2 Sending MTA has no reverse DNS
10.4 FH_HAS_X Has X: header
0.1 SARE_HEAD_HDR_XMS SARE_HEAD_HDR_XMS Message headers used whic

View 4 Replies View Related

E1000_clean_tx_irq: Detected Tx Unit Hang

Aug 11, 2007

in one of my CentOS 64bit, there is errors with NICs

NETDEV WATCHDOG: eth0: transmit timed out
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
Tx Queue <0>
TDH <59>
TDT <5c>
next_to_use <5c>
next_to_clean <58>
time_stamp <1241628eb>
next_to_watch <59>
jiffies <124162eba>
next_to_watch.status <0>
e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
Tx Queue <0>
TDH <59>
TDT <5c>
next_to_use <5c>
next_to_clean <58>
time_stamp <1241628eb>
next_to_watch <59>
jiffies <12416368a>
next_to_watch.status <0>

Is there any idea for fixing? It's SM PDSMI+ board. Kernel 2.6.9-55.0.2.ELsmp #1 SMP Tue Jun 26 14:14:47 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux

View 1 Replies View Related

Forwarding/Default+POP3 Addy Doesnt Work - Piping/Webmail Works

Sep 13, 2007

My server which runs cPanel (license issued touchsupport) is having problems with handling emails.

I use an external DNS provider ( only for this 1 particular domain for handling many Records and such. Through their panel, I have added my mail server's record, i.e. "mailserver.tld".

Now there is a problem with one part of the email issue. I have email piping setup and 1 webmail account setup too. These two work flawlessly. No issues with them. But email forwarding and default address doesn't work.

I am confident that the email settings are working right because, when my clients send an email, piping works and my support system creates a new ticket. But the email forwarding/Default EMail doesn't.

Not just that, I cannot even connect to the webmail account I created via POP3. I 100% sure that I used the correct login credentials and also tried the "+" and ":" for the username part. Just doesn't work. But I can access and read my emails via the Webmail (squirrelmail).

Please help me out with this as soon as possible.

View 3 Replies View Related

Trojan Detected On Initial Load Of Site

Jan 8, 2008

I have 2 reseller accounts with one provider, and in the last several days I have noticed that when you visit the site for the first time, my AV software detects a trojan on the site, but the code & html files are 100% clean!

I'm suspecting that there is something being injected into the scripts from the server daemons that's either running or something else.

Anyone have any suggestions?

View 14 Replies View Related

About Leaseweb For Webhosting Service Not Detected Servers?

Apr 12, 2009

tell me about leaseweb for Webhosting Service not Detected servers?

And i want ask if they allowed Warez linking?

View 7 Replies View Related

SATA Drives :: Detected Within The BIOS But Not In CentOS

Feb 1, 2008

I installed 2 SATA raptors drives on my server. I formatted/partitioned one of the drives through WHM. After rebooting both drives disappeared. They are still detected within the BIOS but not in CentOS. It is possible that I installed a wrong driver or made a bad configuration change.

Server Info:

CentOS 4.6 64bit
Motherboard: [url]OS is running on a 250GB IDE drive
2 SATA WD Raptors (That I am trying to get to work)

View 14 Replies View Related

Lfd: System Exploit Checking Detected A Possible Compromise

Apr 29, 2008

I always recieve this email: from lfd

Time: Tue Apr 29 03:40:13 2008

Possible detection of "Random JS Toolkit"
Failed to create test directory /etc/csf/1: No space left on device:

See [url] for more information

I do this to test if my server is infected:

mkdir /home/1

it created without any problems

and I used tcpdump and I got this:

<script type="text/javascript" src='jscripts/ips_ipsclass.js'></script>
<script type="text/javascript" src='jscripts/ipb_global.js'></script>
<script type="text/javascript" src='cache/lang_cache/en/lang_javascript.js'></script>
<script type="text/javascript" src='jscripts/ips_xmlhttprequest.js'></script>
<script type="text/javascript" src='jscripts/ipb_global_xmlenhanced.js'></script>

is that mean the server is infected? but these scripts are for the IPB forum board so why I still recieve this email?

View 10 Replies View Related

Apache :: Forward Proxy Reported Detected

May 25, 2015

Behind a pfsense box we have a computer who act as a forward proxy with apache. At the end we have the family computer.This is the problem: i can't hide the forward proxy on internet, the forward proxy is reported "detected".

View 2 Replies View Related

Uploading Flash Video Files To Host_A Doesnt Play Well But Plays FIne On Host_B

Jun 27, 2008

to upload some flash videos over to our web host.

All the videos have been uploaded to << link removed >> and in there you will seea flash_video directory, in there should be a html file where you can double click and watch the flash video.

Now go ahead and try it, click on the HTML file and click CONTINUE and try clicking on MODULE 1.. You will see a video play to the left but on the right are bunch of POWERPOINT slides that will appear as the guy continues to speak. THAT DOESNT SHOW..

Our website is hosted by

Dont know much about the plan since its my 2nd day at the job..

But here is the weird part,

i have uploaded the samething - same exact way to another web host and it plays fine, the PPTs show up fine..

What do you guys think it is?

Before someone asks about uploading methods, i tried filezilla, coreftp and cuteFTP using both ASCII and binary methods. Samething..

View 10 Replies View Related

Plesk 11.x / Linux :: File System Loop Detected

Sep 19, 2012

I do not know how this happened though. When I use find command on shell, I got the following error.

find: File system loop detected; `/var/named/chroot/var/named' is part of the same file system loop as `/var/named'.

It is minimal CentOS6.3 install with plesk 11.

View 15 Replies View Related

Plesk 12.x / Linux :: File System Loop Detected

Jun 28, 2015

in CENTOS 6.6 / PLESK 12 when I use the find command I get this notice:find: File system loop detected; "/var/named/chroot/var/named" is part of the same file system loop as "/var/named".

View 2 Replies View Related

Plesk 12.x / Linux :: WordPress Installation Was Previously Detected At This Path / But It Is Not Operating

Jul 17, 2014

On server are many Wordpress installations after scan all these were added however about 90% have this tool-tip message "A WordPress installation was previously detected at this path, but it is not operating properly now." How to correct and manage these installations

View 4 Replies View Related

Copyrights 2005-15, All rights reserved