Forwarding/Default+POP3 Addy Doesnt Work - Piping/Webmail Works
Sep 13, 2007
My server which runs cPanel (license issued touchsupport) is having problems with handling emails.
I use an external DNS provider (editdns.net) only for this 1 particular domain for handling many Records and such. Through their panel, I have added my mail server's record, i.e. "mailserver.tld".
Now there is a problem with one part of the email issue. I have email piping setup and 1 webmail account setup too. These two work flawlessly. No issues with them. But email forwarding and default address doesn't work.
I am confident that the email settings are working right because, when my clients send an email, piping works and my support system creates a new ticket. But the email forwarding/Default EMail doesn't.
Not just that, I cannot even connect to the webmail account I created via POP3. I 100% sure that I used the correct login credentials and also tried the "+" and ":" for the username part. Just doesn't work. But I can access and read my emails via the Webmail (squirrelmail).
Please help me out with this as soon as possible.
View 3 Replies
ADVERTISEMENT
Mar 11, 2007
After migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:
Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.
I also tried forcing the log rotating for that site, but the problem still there.
Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.
View 2 Replies
View Related
Jul 8, 2007
I just purchased an almost bare VPS and installed Cpanel myself. Problem is the mail is not working right. I connect, try and login and repeatedly get Login Failed. I've tried re-creating the emails accounts, i've tried the default mail account that gets created, and i've tried logging into the webmail with the same login problems. I've also telneted to my server from my pc fine, but once again the login just fails. This made me look towards there being a server misconfiguration... because these are newly created mail accounts with correctly entered details. In WHM, i tried restarting the POP3 service and the output doesn't look usual..
Attempting to restart cppop
Waiting for cppop to restart.... . . . . . . . . . . finished.
cppop status couriertcpd is disabled
Service: [cppop] has been disabled by the sys admin
Not sure if it's related or how to fix it... could really use the help since all my mail will probably get dropped after DNS propogation goes thru =/
View 8 Replies
View Related
May 9, 2007
I configured monit to send me email alerts when apache is using too many resources but I cannot receive email alerts. I use Qmail.
As for syslog, there is this message:
monit[6473]: Sendmail: error receiving data from the mailserver 'localhost' -- Resource temporarily unavailable
I tried to add for server name the name used in MX record but with the same result.
Btw: other things configured in cron (eg. RKHUNTER) send me alerts OK.
View 0 Replies
View Related
Dec 30, 2007
im using centos and a perl script doesnt seem to work on my system.
it gives an error on this line.
use LWP::UserAgent;
$ua = LWP::UserAgent->new;
$ua->agent("MyApp/0.1 ");
BEGIN failed--compilation aborted at line 8.
is it a problem with my perl or is it an error with the script?
View 6 Replies
View Related
Oct 30, 2008
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100%
//192.etc.9 loads the html file 100%
//62.WANIP internally loads my prestige routers control panel
//62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
View 0 Replies
View Related
May 19, 2007
One cPanel account out of the entire server is the only one affected. This one user, can not login to POP3 or Webmail for any of his email accounts.
I have checked the permissions and file owner/group on the files and folders in:
/home/USERNAME/mail/*
and
/home/USERNAME/etc/*
I have also tried restarting the POP3 service and cPanel. I have verified his passwd file has correct permissions and is in the correct format. I have tried resetting his email passwords. I have even tried too create a new email account.
Still.. No POP3 / Webmail access.
His email accounts are listed in cPanel.
I have installed ConfigServer Mail Manage (WHM Addon), and his domain will NOT show his email accounts (of course all other domains on the server are fine).
I know this is probably a configuration file or a file permission problem somewhere... I just can't find where!
Any advice?
View 4 Replies
View Related
Nov 14, 2007
I have a remote XP PC: 172.16.1.5 OpenVPN connection with route added for 192.168.2.0/24 to go via the VPN
Now on the other end the network consists of:
I have a OpenVPN server inside the lan on 192.168.2.245
Its default gateway is 192.168.2.1
I have 3 Windows Servers, 192.168.2.246, 247 and 248. All gateways are set to 192.168.2.1.
I have a ethernet router on the network, 192.168.2.1, it has a route added for 192.168.0.0/16 to go via 192.168.2.245, and route added for 172.16.0.0/24 to go via 192.168.2.245 also). the 192.168.0.0/16 is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.
The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping 192.168.2.246 -t' it will suddenly come alive but only after the RDP connection is made.
Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.
Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?
View 1 Replies
View Related
Nov 3, 2007
i'v try to test my mail account in POP3.SITE.COM!
The problem is my pop3 didn't exist?
how can i make it work my pop3 and smtp in Express 2004?
The error messege is
Code:
The host 'pop3.site.com' could not be found. Please verify that you have entered the server name correctly. Account: 'pop3.site.com', Server: 'pop3.site.com', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11004, Error Number: 0x800CCC0D
View 2 Replies
View Related
Oct 31, 2014
I have a website on domain x like https://example.com. One of our customers want to use their own domain name in the address bar and redirect to our web application. In the control panel of the customers website, we can forward the site to our domain without issues (stealth forwarding). After that, we are able to see the site and navigate to some options. But there are some issues/limitations. I cannot open some links, or click on tabs. The login feature works for chrome but not for internet explorer. Is this due the jump of http to https within an iframe? Or is it related to CORS? I have a Windows 2008 R2 server with Apache, which is the frond-end for the tomcat instances. "Tomcat Apache" serves our Java-based web application (mod_jk binded) ...
View 2 Replies
View Related
Nov 23, 2007
I created an email account in cpanel. But then when I try to click 'webmail' by that account, it won't work. It takes me to the option screen where I can click Horde Mail or Squirrel Mail. After I click either one of them, it then just takes me to a log in screen like it didn't accept my login info. I try typing in my username and password but it doesnt work.
Is this a permission thing I need to set in WHM? I'm clueless.
View 4 Replies
View Related
Apr 11, 2015
I updated two days ago the Plesk panel from the Panel itself and it was succesfully but at webmail URL which it appeared one error about default.inc something but after I did refresh some times it disappeared now it doesn't show anything. I tried removing and reinstalling roundcube but still doesn't work..
Here are my logs from /var/log/plesk-roundcube/errors
[09-Apr-2015 14:50:36 UTC] PHP Warning: finfo_file(/usr/share/psa-roundcube/installer/images/roundcube_logo.png): failed to open stream: No such file or directory in /usr/share/psa-roundcube/program/lib/Roundcube/rcube_mime.php on line$n line 754
View 6 Replies
View Related
Jul 5, 2014
Joomla now requires PHP 5.3.10 or above but PHP 5.3.3 is installed. I rely almost exclusively on Plesk to keep the server components up to date and now I can't update my Joomla websites. I tend to avoid working at the command prompt, which is why I lease Plesk. I see that Plesk supports dual (or multiple) PHP versions, but the panel doesn't seem to deploy other versions. Does Parallels plan to allow customers to install multiple versions of PHP from the control panel so that PHP won' break legacy software but the newer apps will be able to run also?
(IMHO a better solution would have been for PHP 5.4 to be fully backward compatible)
View 1 Replies
View Related
Jul 23, 2014
I have added name servers and they should be propagated fully as I created them 3 days ago.
The issue is that the domain using these name servers loads fine and then after awhile it goes back to the Plesk default page.. Then after awhile it shows again, etc. I have run reconfiguration command, have restart bind and Plesk. Not sure what else I can do.
This is sort of a test domain I wanted to get working before switching my main sites to these name servers.
domain is webdevoman.com
nameservers are ns1.talkdevelopment.org and ns2.talkdevelopment.org
View 1 Replies
View Related
Jan 13, 2015
i've migrate from plesk 11.5 (centos server) to plesk 12 (ubuntu 14). The migrate process doesn't give problems but now (and for all domains), web service doesn't work well in fact works but all domains resolve /var/www/vhosts/default/htpdocs/index.html and not /var/www/vhosts/domain/httpdocs/
The rest of services (mail, ftp...) seems to work ok. I don't know if it's important but as before migrate, we use and external DNS server so in plesk i have DNS server down.
View 1 Replies
View Related
Mar 29, 2008
When I send a test email to a pipe I just setup it bounces with the following error:
A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
223|/home/dsd/public_html/cli/index.php224@server.dsdsupport.com
(ultimately generated from support@dsdsupport.com)
Unrouteable address
View 5 Replies
View Related
Jun 2, 2008
I can't seem to have any luck with these damned companies I buy renewed support contracts through. So here's my new issue, finally ModernBill and Kayako are setup and the box is running however i'm trying to get e-mail piping setup for E-Support. Ive created an email account in plesk both as a mail box and without a mailbox to see if that made a difference I added the line with quotations to the file it says to add which mind you isn't there in the first place it's a new file.
I've created the email queue pipe in kayako and no go sending an email to that address doesn't bounce back nor does it open a ticket.
E-mail piping in Plesk Control Panel
This procedure explains how to set up e-mail piping in the Plesk Control Panel.
1. Via SSH, you need to manually edit the file:
a. /var/qmail/mailnames/company.com/.qmail-support
b. Where support is the e-mail alias name (support@yourdomain.com).
2. The .qmail-support is the name of the file we are editing, and in it we will place the pipe
command.
3. Inside this file, the following command needs to be entered:
a. “|/home/httpd/vhosts/company.com/httpdocs/full/path/to/cli/index.php”
4. This command will pipe | incoming e-mails to the specified location.
5. Save the file.
After some messing around I found out the location of the .qmail was wrong in the manual so I've now added it however I get this error,
Hi. This is the qmail-send program at liquidwind.plexnetworks.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
<general@plexnetworks.com>:
/bin/sh: /var/www/vhosts/plexnetworks.com/subdomains/helpdesk/httpdocs/cli/index.php: Permission denied
I've changed the permission to 777 and same result.
View 2 Replies
View Related
Jun 30, 2008
I had email forwarding from a site that I am running on a DirectAdmin host and its not working now.
View 1 Replies
View Related
Jan 4, 2009
I try to work out a system where I can get the context of an incoming E-mail and input it to another E-mail which I then forward to a different address. Must be able to preconfigure both the incoming and outgoing E-mail addresses so to be working as an automated kind of system. Any ideas, email manager lists, softwares, scripts, even some ticketing system would be considered. Please, do post your experience/knowledge. I just need to makeb a simple simple system to do the job described above.
View 2 Replies
View Related
Mar 7, 2008
I have SpamAssassin on my server, and I use email piping to forward incoming emails to a PHP script. I'd like to know if emails go through SpamAssassin before being piped, or if they don't go through SpamAssasin. Where exactly is SpamAssassin requested to scan emails?
View 5 Replies
View Related
Nov 29, 2014
My requirement is to redirect all hosted domain's webmail to the main hosting webmail url .. how can this be achieved ?
View 7 Replies
View Related
Jan 9, 2008
I can access my web domain by typing...
[url]
But i get no server found error when i type....
www.mysite.com or [url]
I am using LxAdmin Panel, and have added (A) record for www
www A Server IP
View 7 Replies
View Related
Oct 4, 2014
I've been trying to get this to work for almost 2 weeks now. Is there a tutorial around for Plesk 12, Postfix and WHMCS that works? WHMCS does not support Plesk, only Direct Admin and cPanel.I'm getting this in maillog:
ct 4 23:12:48 xxx postfix/smtpd[24500]: connect from mail-la0-f44.google.com[29.5.15.4]
Oct 4 23:12:49 xxx postfix/smtpd[24500]: E83E57C9C: client=mail-la0-f44.google.com[29.5.15.4]
Oct 4 23:12:50 xxx postfix/cleanup[24506]: E83E57C9C: message-id=<CAC9_f0rbT-Lb-v1NKhAr7+HAkg@mail.gmail.com>
Oct 4 23:12:50 xxx /usr/lib/plesk-9.0/psa-pc-remote[4537]: handlers_stderr: SKIP
Oct 4 23:12:50 xxx /usr/lib/plesk-9.0/psa-pc-remote[4537]: SKIP during call 'check-quota' handler
Oct 4 23:12:50 xxx postfix/qmgr[7097]: E83E57C9C: from=<test_user@gmail.com>, size=1859, nrcpt=1 (queue active)
Oct 4 23:12:50 xxx postfix-local[24509]: postfix-local: from=test_user@gmail.com, to=support@xxx.net, dirname=/var/qmail/mailnames
Oct 4 23:12:50 xxx postfix/pipe[24508]: E83E57C9C: to=<support@xxx.net>, relay=plesk_virtual, delay=1, delays=0.89/0.01/0/0.16, dsn=2.0.0, status=sent (delivered via plesk_virtual service)
Oct 4 23:12:50 xxx postfix/qmgr[7097]: E83E57C9C: removed
I have tried editing .qmail and I have also tried this tutorial -[URL] ..... but nothing is working for me at the moment.
View 6 Replies
View Related
Mar 28, 2009
As posted in a previous thread I noted how I have been hosting with GeekStorage. After a little bit of investigation I found that a total of 593 (possibly more) website where being hosted on the same server as mine. I'm not sure if this is overselling but because I'm new to all this but I'm pretty sure it is.
Now, I'm looking on switching from GeekStorage to someone who doesn't oversell. I would be fine with 10-20GB of storage and >150GB bandwidth. Budget is 5-10$ a month.
View 14 Replies
View Related
Jan 28, 2009
so for over 3 weeks now pc-core.net had some problems with their servers and my accounts were just lost and no one answers my support tickets they just erase them, they disabled my account to support so i can only submit support tickets and click the link on the email.
they told me to email cshelpdesk.com to get my account moved to a new server and cshelpdesk is just telling me im SOL. they dont have access to the server i was at and basically to F off.
is there anything i can do? im basically just being ignored and they dont even have a number to them.
View 12 Replies
View Related
Mar 23, 2009
my forum is VB and its doesnt sent any email for users!
i check the options and everything looks fine ..
my vps had csf firewall installed ..
the csf.conf is
# Lists of ports in the following comma separated lists can be added using a
# colon (e.g. 30000:35000).
# Allow incoming TCP ports
TCP_IN = "53,1116,80"
# Allow outgoing TCP ports
TCP_OUT = "53,80,3306,1116"
# Allow incoming UDP ports
UDP_IN = "1116,53"
# Allow outgoing UDP ports
# To allow outgoing traceroute add 33434:33523 to this list
UDP_OUT = "53,1116"
# Allow incoming PING
ICMP_IN = "0"
# Set the per IP address incoming ICMP packet rate
# To disable rate limiting set to "0"
ICMP_IN_RATE = "1/s"
# Allow outgoing PING
ICMP_OUT = "1"
# Set the per IP address outgoing ICMP packet rate
# To disable rate limiting set to "0"
ICMP_OUT_RATE = "1/s"
and the version of csf is
[root@www csf]# /usr/sbin/csf -v
csf: v4.56 (generic)
[root@www csf]#
am useing centOS5 and ssh port 1116
am not useing any of control panel or ftp ...
the email i configured it with google.com/a services ..
View 12 Replies
View Related
Jun 17, 2008
my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said
Good morning,
Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh:
/ etc / init.d / httpd start
Starting httpd: [OK]
We see that the port is open 80:
netstat-tanpu | grep 80
tcp 0 0 0.0.0.0:7080 0.0.0.0: * LISTEN 3071/lshttpd
tcp 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 14349/httpd
From the outside, at this precise moment, we are able to establish a connection on port 80:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
Connected to ks357687.kimsufi.com.
Escape character is'^]'.
Get
<! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN">
<html> <head>
<title> 501 Method Not Implemented </ title>
</ head> <body>
<h1> Method Not Implemented </ h1>
<p> get to / not supported. <br />
</ p>
<hr>
<address> Apache/2.2.8 (EL) Server at ks357687.kimsufi.com Port 80 </ address>
</ body> </ html>
Connection closed by foreign host.
If I stop the Apache server:
/ etc / init.d / httpd stop
Stopping httpd: [OK]
More than 80 active port or connection possible from the outside:
In this case the connection of the exterior evidemment is not possible:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
telnet: Unable to connect to remote host: Connection refused
View 9 Replies
View Related
