I configured monit to send me email alerts when apache is using too many resources but I cannot receive email alerts. I use Qmail.
As for syslog, there is this message:
monit[6473]: Sendmail: error receiving data from the mailserver 'localhost' -- Resource temporarily unavailable
I tried to add for server name the name used in MX record but with the same result.
Btw: other things configured in cron (eg. RKHUNTER) send me alerts OK.
After migrating from the old ensim to the new "X", everything is working fine, except for the webalizer, I activated webalizer in one domain a few days ago.. and everyday Im trying to see the webalizer information, and it is always displaying this message:
Could not retrieve the requested site report because the Web server logs have not yet been generated. These are generated once a day. Please check again later.
I also tried forcing the log rotating for that site, but the problem still there.
Server is RHES 4 with EnsimPro X, log generation and webalizer is activated for the domain.
im using centos and a perl script doesnt seem to work on my system.
it gives an error on this line.
use LWP::UserAgent;
$ua = LWP::UserAgent->new;
$ua->agent("MyApp/0.1 ");
BEGIN failed--compilation aborted at line 8.
is it a problem with my perl or is it an error with the script?
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100%
//192.etc.9 loads the html file 100%
//62.WANIP internally loads my prestige routers control panel
//62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
I have a remote XP PC: 172.16.1.5 OpenVPN connection with route added for 192.168.2.0/24 to go via the VPN
Now on the other end the network consists of:
I have a OpenVPN server inside the lan on 192.168.2.245
Its default gateway is 192.168.2.1
I have 3 Windows Servers, 192.168.2.246, 247 and 248. All gateways are set to 192.168.2.1.
I have a ethernet router on the network, 192.168.2.1, it has a route added for 192.168.0.0/16 to go via 192.168.2.245, and route added for 172.16.0.0/24 to go via 192.168.2.245 also). the 192.168.0.0/16 is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.
The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping 192.168.2.246 -t' it will suddenly come alive but only after the RDP connection is made.
Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.
Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?
My server which runs cPanel (license issued touchsupport) is having problems with handling emails.
I use an external DNS provider (editdns.net) only for this 1 particular domain for handling many Records and such. Through their panel, I have added my mail server's record, i.e. "mailserver.tld".
Now there is a problem with one part of the email issue. I have email piping setup and 1 webmail account setup too. These two work flawlessly. No issues with them. But email forwarding and default address doesn't work.
I am confident that the email settings are working right because, when my clients send an email, piping works and my support system creates a new ticket. But the email forwarding/Default EMail doesn't.
Not just that, I cannot even connect to the webmail account I created via POP3. I 100% sure that I used the correct login credentials and also tried the "+" and ":" for the username part. Just doesn't work. But I can access and read my emails via the Webmail (squirrelmail).
Please help me out with this as soon as possible.
i have a fedora core 4 server.. and i want to install a good Qmail email server to host some emails of diferent domains..
On searching i found that Qmail should be install with those associated programs/system for a better server :
Qmail itself
EZmlm and EZmlm-idx
Autoresponder
Vpopmail
VQadmin
maildrop
QmailAdmin
Courier-imap/imaps with Courierpassd
Squirrelmail web mail program ......
Does anyone know of a service whic will allow a webmaster of a website to send news alerts via SMS to visitors mobile phones?
View 2 Replies View RelatedProbably an easy question and I am just not seeing it, but how do you set which email address you want CSF alerts sent to?
View 5 Replies View RelatedHow to stop lfd mail from csf as Suspicious process running under user and Excessive resource usage?
View 7 Replies View RelatedWe have about 100 servers using CSF, and CSF is generating A LOT of mail alerts.. which is causing us to receive over 1000 mails daily, just from CSF alerts.. this doesn't include support emails or others.
My question..
How do you handle mail alerts when you have lot of servers? See... i can not waste 5 hours reading every mail.. even if I start deleting those mails a lot of important and critical alerts can be erased in the process..
How do you filter or handle this kind of things?
I have started having daily numproc black alerts on my VPS. Tech Support have increased the numproc limit already to 1500 but say that I will need a dedicated server, that's the last I have heard. I'd like to know if there is anything I can do to limit this numproc problem without the need to get a dedicated server. The numproc alerts seem to be getting more frequent but the visitors to the site are not increasing. Here are the details:
2 x AMD Opteron(tm) Processor 244, 904.127 MHz, cache size: 1024 KB
Linux 2.6.8-022stab078.21-enterprise #1
Apache/1.3.36 (Unix) mod_auth_passthrough/1.8 mod_log_bytes/1.2 mod_bwlimited/1.4 PHP/4.4.2 FrontPage/5.0.2.2635.SR1.2 mod_ssl/2.8.27 OpenSSL/0.9.7a
Cpanel
Only one site is hosted on the VPS. Includes phpbb forum & various php / mysql sections like an affiliate store & photo gallery. Averaging about 11000 visitors/day
I tried to run /proc/user_beancounters & ps axv commands when the numproc was maxed this morning but could not log in to run it so these are the ones I ran yesterday.
Code:
uid resource held maxheld barrier limit failcnt
132: kmemsize 13786145 13803842 39485440 40632320 0
lockedpages 0 0 1024 1024 0
privvmpages 110039 110045 262144 278528 17
shmpages 731 731 86016 86016 0
dummy 0 0 0 0 0
numproc 683 683 1500 1500 4709595
physpages 62578 62580 0 2147483647 0
vmguarpages 0 0 135168 2147483647 0
oomguarpages 66597 66599 104448 2147483647 0
numtcpsock 47 49 1440 1440 0
numflock 11 11 752 824 0
numpty 1 1 64 64 0
numsiginfo 0 1 1024 1024 0
tcpsndbuf 92552 112604 6881280 10813440 0
tcprcvbuf 692 1384 6881280 10813440 0
othersockbuf 98524 103180 4504320 8388608 0
dgramrcvbuf 0 0 1048576 1048576 0
numothersock 123 123 1440 1440 0
dcachesize 619920 622790 9093120 9666560 0
numfile 2434 2435 23280 23280 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
numiptent 47 47 512 512 0
Code:
PID TTY STAT TIME MAJFL TRS DRS RSS %MEM COMMAND
1 ? Ss 0:00 0 26 1593 552 0.0 init
15751 ? Ss 0:00 0 28 1495 596 0.0 syslogd -m 0
15761 ? S 0:00 0 10 1437 456 0.0 /usr/sbin/courierlogger -pid=/var/spool/authdaemon/pid -facility=mail -start /usr/libexec/courier-authlib/authdaemond
15762 ? S 0:00 0 13 1782 576 0.0 /usr/libexec/courier-authlib/authdaemond
15786 ? S 0:00 0 13 1782 616 0.0 /usr/libexec/courier-authlib/authdaemond
15787 ? S 0:00 0 13 1782 596 0.0 /usr/libexec/courier-authlib/authdaemond
15788 ? S 0:00 0 13 1782 616 0.0 /usr/libexec/courier-authlib/authdaemond
15789 ? S 0:00 0 13 1782 616 0.0 /usr/libexec/courier-authlib/authdaemond
15790 ? S 0:00 0 13 1782 584 0.0 /usr/libexec/courier-authlib/authdaemond
15799 ? Ssl 0:00 8 269 39030 2664 0.0 /usr/sbin/named -u named
15814 ? Ss 0:01 3 296 3711 1704 0.0 /usr/sbin/sshd
15825 ? Ss 0:00 2 138 1933 864 0.0 xinetd -stayalive -pidfile /var/run/xinetd.pid
15836 ? S 0:00 0 573 1570 1068 0.0 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/server.surfing-waves.com.pid
15861 ? Sl 0:01 40 4000 108171 26516 0.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/server.surfing-waves.com.pid --skip-external-locking
15907 ? S 0:00 0 829 8938 7388 0.2 chkservd
15923 ? S 0:00 0 10 1441 468 0.0 /usr/sbin/courierlogger -pid=/var/run/imapd.pid -start -name=imapd /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 143 /usr/lib/courier-imap/sbin/imaplogin /usr/lib/courier-imap/bin/imapd Maildir
15924 ? S 0:00 0 44 1515 512 0.0 /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 143 /usr/lib/courier-imap/sbin/imaplogin /usr/lib/courier-imap/bin/imapd Maildir
15934 ? S 0:00 0 10 1441 400 0.0 /usr/sbin/courierlogger -pid=/var/run/imapd-ssl.pid -start -name=imapd-ssl /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 993 /usr/lib/courier-imap/bin/couriertls -server -tcpd /usr/lib/courier-imap/sbin/imaplogin /usr/lib/courier-imap/bin/imapd Maildir
15935 ? S 0:00 0 44 1515 492 0.0 /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 993 /usr/lib/courier-imap/bin/couriertls -server -tcpd /usr/lib/courier-imap/sbin/imaplogin /usr/lib/courier-imap/bin/imapd Maildir
15940 ? S 0:00 0 10 1441 472 0.0 /usr/sbin/courierlogger -pid=/var/run/pop3d.pid -start -name=pop3d /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 110 /usr/lib/courier-imap/sbin/pop3login /usr/lib/courier-imap/bin/pop3d Maildir
15941 ? S 0:00 0 44 1515 512 0.0 /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 110 /usr/lib/courier-imap/sbin/pop3login /usr/lib/courier-imap/bin/pop3d Maildir
15946 ? S 0:00 0 10 1441 400 0.0 /usr/sbin/courierlogger -pid=/var/run/pop3d-ssl.pid -start -name=pop3d-ssl /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 995 /usr/lib/courier-imap/bin/couriertls -server -tcpd /usr/lib/courier-imap/sbin/pop3login /usr/lib/courier-imap/bin/pop3d Maildir
15950 ? S 0:00 0 44 1515 492 0.0 /usr/lib/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=30 -nodnslookup -noidentlookup 995 /usr/lib/courier-imap/bin/couriertls -server -tcpd /usr/lib/courier-imap/sbin/pop3login /usr/lib/courier-imap/bin/pop3d Maildir
15971 ? Ss 0:00 0 678 6669 1880 0.0 /usr/sbin/exim -bd -q60m
15977 ? Ss 0:00 0 678 6669 1800 0.0 /usr/sbin/exim -tls-on-connect -bd -oX 465
15982 ? S 0:00 0 829 2214 1584 0.0 antirelayd
16024 ? Ss 0:00 1 829 24742 19592 0.5 /usr/bin/spamd -d --allowed-ips=127.0.0.1 --pidfile=/var/run/spamd.pid --max-children=5
16046 ? Ss 0:07 2 533 13126 5752 0.1 /usr/local/apache/bin/httpd -DSSL
16057 ? Ss 0:00 0 36 2435 1040 0.0 crond
16073 ? S 0:03 4 829 28146 25804 0.7 spamd child
16074 ? S 0:00 14 829 25006 22188 0.6 spamd child
16075 ? S 0:54 120 533 16206 9392 0.2 /usr/local/apache/bin/httpd -DSSL
16076 ? S 0:57 154 533 16306 9500 0.2 /usr/local/apache/bin/httpd -DSSL
16077 ? S 0:54 159 533 16426 9628 0.2 /usr/local/apache/bin/httpd -DSSL
16078 ? S 1:00 143 533 16046 9224 0.2 /usr/local/apache/bin/httpd -DSSL
16079 ? S 0:54 191 533 16330 9508 0.2 /usr/local/apache/bin/httpd -DSSL
16131 ? S 0:00 0 829 6754 4892 0.1 eximstats
16160 ? S 0:55 89 533 16222 9424 0.2 /usr/local/apache/bin/httpd -DSSL
16167 ? S 0:00 1 829 6090 4940 0.1 cpbandwd
16168 ? SN 0:03 19 829 15762 13068 0.3 cpanellogd - sleeping for logs
16185 ? S 0:00 0 829 2950 2300 0.0 entropychat
16189 ? S 0:54 167 533 16114 9288 0.2 /usr/local/apache/bin/httpd -DSSL
16190 ? S 0:51 125 533 15974 9176 0.2 /usr/local/apache/bin/httpd -DSSL
16191 ? S 0:00 1 52 1623 552 0.0 /usr/local/cpanel/bin/startmelange
16208 ? Ss 0:00 1 61 9774 4560 0.1 /usr/bin/stunnel-4.15local /usr/local/cpanel/etc/stunnel/default/stunnel.conf.run
16213 ? S 0:53 110 533 16214 9404 0.2 /usr/local/apache/bin/httpd -DSSL
16214 ? S 0:51 133 533 16170 9356 0.2 /usr/local/apache/bin/httpd -DSSL
16217 ? Ss 0:00 0 828 8367 5604 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/mailmanctl -s start
16224 ? Ss 0:00 0 61 3982 1084 0.0 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 1
16247 ? Ss 0:00 0 27 1452 492 0.0 /usr/sbin/portsentry -tcp
16255 ? S 0:00 0 828 8091 5344 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=ArchRunner:0:1 -s
16256 ? S 0:00 0 828 8115 5520 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=BounceRunner:0:1 -s
16257 ? S 0:00 0 828 8111 5164 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=CommandRunner:0:1 -s
16258 ? S 0:00 0 828 8075 5760 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=IncomingRunner:0:1 -s
16259 ? S 0:00 0 828 8087 5356 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=NewsRunner:0:1 -s
16260 ? S 0:00 0 828 8111 4780 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=OutgoingRunner:0:1 -s
16261 ? S 0:00 0 828 8119 5072 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=VirginRunner:0:1 -s
16262 ? S 0:00 0 828 8119 4672 0.1 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=RetryRunner:0:1 -s
22479 ? S 0:00 0 2127 6332 6232 0.1 /etc/authlib/authProg
28484 ? S 0:00 0 2127 6332 6996 0.2 /etc/authlib/authProg
28488 ? S 0:00 0 2127 6332 6996 0.2 /etc/authlib/authProg
5372 ? S 0:00 0 2127 6332 6996 0.2 /etc/authlib/authProg
25825 ? S 0:02 0 3552 8707 10792 0.3 cpsrvd - waiting for connections
7655 ? S 0:00 0 2127 6332 6996 0.2 /etc/authlib/authProg
19601 ? S 0:07 5 533 15518 8700 0.2 /usr/local/apache/bin/httpd -DSSL
30024 ? Ss 0:00 3 106 5765 1812 0.0 pure-ftpd (SERVER)
30027 ? S 0:00 0 8 3559 928 0.0 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr/sbin/pureauth
3949 ? S 0:01 0 3552 9059 11152 0.3 whostmgrd - serving 127.0.0.1
3950 ? S 0:00 0 7839 15344 21744 0.6 /usr/local/cpanel/whostmgr/bin/whostmgr2 ./managepid
3951 ? Z 0:00 0 0 0 0 0.0 [ps] <defunct>
3952 ? S 0:01 2 166 1477 532 0.0 strace -p 16260
9881 ? S 0:00 1 533 15450 8612 0.2 /usr/local/apache/bin/httpd -DSSL
11712 ? S 0:00 1 533 15454 8620 0.2 /usr/local/apache/bin/httpd -DSSL
11749 ? S 0:00 2 533 15490 8656 0.2 /usr/local/apache/bin/httpd -DSSL
14310 ? Ss 0:00 0 296 6603 2184 0.0 sshd: surfingw [priv]
15455 ? S 0:00 0 296 6603 2248 0.0 sshd: surfingw@ttyp0
15457 ttyp0 Ss 0:00 0 573 1578 1276 0.0 -bash
20096 ? S 0:00 0 533 13258 5904 0.1 /usr/local/apache/bin/httpd -DSSL
20103 ? S 0:00 0 533 13258 5904 0.1 /usr/local/apache/bin/httpd -DSSL
20104 ? S 0:00 0 533 13270 5924 0.1 /usr/local/apache/bin/httpd -DSSL
20136 ttyp0 R+ 0:00 0 56 2207 680 0.0 ps axv
As posted in a previous thread I noted how I have been hosting with GeekStorage. After a little bit of investigation I found that a total of 593 (possibly more) website where being hosted on the same server as mine. I'm not sure if this is overselling but because I'm new to all this but I'm pretty sure it is.
Now, I'm looking on switching from GeekStorage to someone who doesn't oversell. I would be fine with 10-20GB of storage and >150GB bandwidth. Budget is 5-10$ a month.
so for over 3 weeks now pc-core.net had some problems with their servers and my accounts were just lost and no one answers my support tickets they just erase them, they disabled my account to support so i can only submit support tickets and click the link on the email.
they told me to email cshelpdesk.com to get my account moved to a new server and cshelpdesk is just telling me im SOL. they dont have access to the server i was at and basically to F off.
is there anything i can do? im basically just being ignored and they dont even have a number to them.
my forum is VB and its doesnt sent any email for users!
i check the options and everything looks fine ..
my vps had csf firewall installed ..
the csf.conf is
# Lists of ports in the following comma separated lists can be added using a
# colon (e.g. 30000:35000).
# Allow incoming TCP ports
TCP_IN = "53,1116,80"
# Allow outgoing TCP ports
TCP_OUT = "53,80,3306,1116"
# Allow incoming UDP ports
UDP_IN = "1116,53"
# Allow outgoing UDP ports
# To allow outgoing traceroute add 33434:33523 to this list
UDP_OUT = "53,1116"
# Allow incoming PING
ICMP_IN = "0"
# Set the per IP address incoming ICMP packet rate
# To disable rate limiting set to "0"
ICMP_IN_RATE = "1/s"
# Allow outgoing PING
ICMP_OUT = "1"
# Set the per IP address outgoing ICMP packet rate
# To disable rate limiting set to "0"
ICMP_OUT_RATE = "1/s"
and the version of csf is
[root@www csf]# /usr/sbin/csf -v
csf: v4.56 (generic)
[root@www csf]#
am useing centOS5 and ssh port 1116
am not useing any of control panel or ftp ...
the email i configured it with google.com/a services ..
my sys admin is currently in vacation and ovh staff cant help me much so i really appreciate if someone could help me tackle down this issue. I cant create ftp account at all heres what ovh said
Good morning,
Thank you to trust us, there is not my point of view or that of my colleague problem of the kernel compilation on your server or a file corrupted, and your Apache web server is functional, Status of the launch; after this command, via ssh:
/ etc / init.d / httpd start
Starting httpd: [OK]
We see that the port is open 80:
netstat-tanpu | grep 80
tcp 0 0 0.0.0.0:7080 0.0.0.0: * LISTEN 3071/lshttpd
tcp 0 0 0.0.0.0:80 0.0.0.0: * LISTEN 14349/httpd
From the outside, at this precise moment, we are able to establish a connection on port 80:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
Connected to ks357687.kimsufi.com.
Escape character is'^]'.
Get
<! DOCTYPE HTML PUBLIC "- / / IETF / / DTD HTML 2.0 / / EN">
<html> <head>
<title> 501 Method Not Implemented </ title>
</ head> <body>
<h1> Method Not Implemented </ h1>
<p> get to / not supported. <br />
</ p>
<hr>
<address> Apache/2.2.8 (EL) Server at ks357687.kimsufi.com Port 80 </ address>
</ body> </ html>
Connection closed by foreign host.
If I stop the Apache server:
/ etc / init.d / httpd stop
Stopping httpd: [OK]
More than 80 active port or connection possible from the outside:
In this case the connection of the exterior evidemment is not possible:
Telnet ks357687.kimsufi.com 80
Trying 91.121.148.X ...
telnet: Unable to connect to remote host: Connection refused
I am using Windows 2003 Enterprise Edition SP1 and i have recently set the computer up to 4GB RAM. I notice a problem occur error :
When I start the computer, Bios detected all 4GB Ram. However, i have checked Total physical memory in General (My Computer-> Properties) doesnot detect all 4GB Ram. it only detect 3GB Ram.
I have checked that this OS support up to 32GB . Why it doesn't detect all 4GB ?
What happen to it?
Mainboard : Intel chipset 915GL
I did following the instruction in internet (exactly is Microsoft) is /PAE in boot.ini file. But, it doesnt work.
Yesterday we registerd and created 2 domains in our server.
Everything is ok, files uploaded, dns zones created, httpd virtual host created...
The problem is that trying to browse the site trough http://www.site.com redirects me to [url] my main server IP address, this page shows a cPanel Welcome message.
But, using [url], the site is loaded ok, withouth any problems.
DNS zone shows:
Code:
; cPanel 11.11.0-BETA_16977
; Zone file for site.com
$TTL 14400
@ 86400 IN SOA mydns1.wolo.com. admin.hostingserver.com. (
2007092601 ; serial, todays date+todays
86400 ; refresh, seconds
7200 ; retry, seconds
3600000 ; expire, seconds
86400 ) ; minimum, seconds
site.com. 86400 IN NS mydns1.wolo.com.
site.com. 86400 IN NS mydns2.wolo.com.
site.com. IN A IP_ADDRESS
localhost.site.com. IN A 127.0.0.1
site.com. IN MX 0 site.com.
mail IN CNAME site.com.
www IN A IP_ADDRESS
ftp IN A IP_ADDRESS
Apache virtual host code
Code:
<VirtualHost IP_ADDRESS>
ServerAlias www.site.com
ServerAdmin webmaster@site.com
DocumentRoot /home/siteuser/public_html
ServerName site.com
<IfModule mod_suphp.c>
suPHP_UserGroup siteuser siteuser
</IfModule>
<IfModule mod_php4.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"
</IfModule>
<IfModule mod_php5.c>
php_admin_value open_basedir "/home/siteuser:/usr/lib/php:/usr/local/lib/php:/tmp"
</IfModule>
User siteuser
Group siteuser
BytesLog /usr/local/apache/domlogs/site.com-bytes_log
CustomLog /usr/local/apache/domlogs/site.com combined
Options -ExecCGI -Includes
</VirtualHost>
My sites have been receiving a little more traffic these days (but not too much) and it seems my vps is slowing and at times vbulletin/wordpress page doesn't loads or loads a bit sluggishly (refreshing the page gets rids of not loading issue but not sluggishness).
So I logged into Virtozzo and saw the following QOS alerts:
Jul 05, 2008 11:38:25 AM Green zoneGreen zone kmemsize
Jul 05, 2008 11:38:25 AM Green zoneGreen zone tcpsndbuf
Jul 05, 2008 11:34:54 AM Green zoneGreen zone privvmpages
Jul 05, 2008 11:33:54 AM Yellow zoneYellow zone privvmpages
Jul 05, 2008 11:33:15 AM Black zoneBlack zone kmemsize
Jul 05, 2008 11:33:15 AM Black zoneBlack zone tcpsndbuf
Jul 05, 2008 11:28:05 AM Black zoneBlack zone kmemsize
Jul 05, 2008 11:28:05 AM Black zoneBlack zone tcpsndbuf
Jul 05, 2008 11:27:55 AM Red zoneRed zone tcpsndbuf
Jul 05, 2008 11:22:55 AM Black zoneBlack zone kmemsize
Jul 05, 2008 11:22:54 AM Black zoneBlack zone tcpsndbuf
Jul 05, 2008 11:17:54 AM Black zoneBlack zone kmemsize
Jul 05, 2008 11:17:45 AM Black zoneBlack zone tcpsndbuf
Jul 03, 2008 05:31:29 PM Green zoneGreen zone othersockbuf
Jul 03, 2008 05:26:19 PM Black zoneBlack zone othersockbuf
I have previously seen tcpsndbuf going into yellow and even black zone (but only once in a blue moon) however never saw kemsize going into black zone.
These are the limits my host has set:
IDCurrent UseSoft LimitHard LimitUnits
tcpsndbuf301,8602,580,4804,055,040bytes
kmemsize9,135,28929,614,08030,474,240bytes
othersockbuf17,8881,689,1203,145,728bytes
My Cpanel VPS has around 384MB of dedicated ram and around 896Mb of burst Ram. At any given time, there is at least 150Mb of free dedicated RAM. So based on this, are these values correct or they need to be changed or do I need to look for something else which might be causing this problem?
I don't run Spamassassin
can any1 tell me if this is ok for 3 or 4 days i was having Black and yellow zone alerts for NUMFILE on my vps, vps has 256Ram,1024 burst, using centos, virtuozzo and cpanel
somehone can tell me what else to check,
Code:
root@ns1 [~]# cat /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt
399: kmemsize 8507424 8831248 59228160 60948480 0
lockedpages 0 0 1536 1536 0
privvmpages 90223 93110 262144 270008 0
shmpages 3279 3279 129024 129024 0
dummy 0 0 0 0 0
numproc 86 89 500 500 3736
physpages 47988 50219 0 2147483647 0
vmguarpages 0 0 65536 2147483647 0
oomguarpages 49398 51629 65536 2147483647 0
numtcpsock 47 51 1880 1880 0
numflock 12 13 1128 1236 0
numpty 1 1 64 64 0
numsiginfo 0 1 1536 1536 0
tcpsndbuf 436020 467324 10321920 16220160 0
tcprcvbuf 770048 802816 10321920 16220160 0
othersockbuf 34888 39360 6756480 12582912 0
dgramrcvbuf 0 0 1572864 1572864 0
numothersock 30 34 2160 2160 0
dcachesize 1012491 1047191 13639680 14499840 0
numfile 4370 4487 8192 8192 6491
dummy 0 0 0 0 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
numiptent 298 298 2000 2000 0
root@ns1 [~]#
Code:
root@ns1 [~]# ps -auxf
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.3/FAQ
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 1620 600 ? Ss 2006 0:22 init [3]
root 26544 0.0 0.0 1524 544 ? Ss 2006 0:18 syslogd -m 0
named 26570 0.0 0.0 46640 2976 ? Ssl 2006 1:14 /usr/sbin/named -u named
root 27659 0.0 0.0 1448 376 ? S 2006 0:00 /usr/sbin/courierlogger -pid=/var/spool/authdaemon
root 27667 0.0 0.0 1796 616 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 27697 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 7289 0.0 0.1 9880 8584 ? S Jan21 0:06 | \_ /etc/authlib/authProg
root 27699 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 13800 0.0 0.0 9888 6156 ? S 2006 0:22 | \_ /etc/authlib/authProg
root 27700 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 5506 0.0 0.1 9880 8584 ? S Jan21 0:06 | \_ /etc/authlib/authProg
root 27701 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 7516 0.0 0.1 9880 8588 ? S Jan21 0:07 | \_ /etc/authlib/authProg
root 27702 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 31958 0.0 0.1 9880 8584 ? S Jan21 0:07 \_ /etc/authlib/authProg
root 30718 0.0 0.0 4008 1128 ? Ss 2006 0:02 /usr/sbin/sshd
root 29967 0.0 0.0 6900 2280 ? Ss 15:06 0:00 \_ sshd: root@pts/0
root 30115 0.0 0.0 2944 1280 ? Ss 15:06 0:00 \_ login -- root
root 30124 0.0 0.0 2280 1340 pts/0 Ss 15:06 0:00 \_ -bash
root 5923 0.0 0.0 2300 812 pts/0 R+ 15:20 0:00 \_ ps -auxf
root 31769 0.0 0.0 2072 788 ? Ss 2006 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid
root 31780 0.0 0.0 2144 1124 ? S 2006 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/my
mysql 31808 0.0 0.3 112316 24712 ? Sl 2006 9:08 \_ /usr/sbin/mysqld --basedir=/ --datadir=/var/li
root 31980 0.0 0.0 9752 8012 ? S 2006 1:05 chkservd
root 31995 0.0 0.0 1452 380 ? S 2006 0:01 /usr/sbin/courierlogger -pid=/var/run/imapd.pid -s
root 31996 0.0 0.0 1560 512 ? S 2006 0:02 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32018 0.0 0.0 1452 300 ? S 2006 0:00 /usr/sbin/courierlogger -pid=/var/run/imapd-ssl.pi
root 32019 0.0 0.0 1560 492 ? S 2006 0:00 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32027 0.0 0.0 1452 380 ? S 2006 0:02 /usr/sbin/courierlogger -pid=/var/run/pop3d.pid -s
root 32029 0.0 0.0 1560 512 ? S 2006 0:02 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32036 0.0 0.0 1452 300 ? S 2006 0:00 /usr/sbin/courierlogger -pid=/var/run/pop3d-ssl.pi
root 32037 0.0 0.0 1560 492 ? S 2006 0:00 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32263 0.0 0.0 2472 928 ? Ss 2006 0:05 crond
root 32288 0.0 0.0 3024 1160 ? S 15:20 0:00 \_ crond
root 32370 0.0 0.0 2096 1036 ? Ss 15:20 0:00 \_ /bin/sh /usr/local/sbin/bfd -q
root 32463 0.1 0.0 2100 1068 ? S 15:20 0:00 \_ /bin/sh /usr/local/sbin/bfd -s
root 5917 0.0 0.0 2100 468 ? R 15:20 0:00 \_ /bin/sh /usr/local/sbin/bfd -s
root 5918 0.0 0.0 2096 976 ? S 15:20 0:00 \_ /bin/sh /usr/local/bfd/tlog /v
root 5922 0.0 0.0 2096 564 ? R 15:20 0:00 | \_ /bin/sh /usr/local/bfd/tlo
root 5919 0.0 0.0 1572 472 ? S 15:20 0:00 \_ grep sshd
root 5920 0.0 0.0 1572 484 ? S 15:20 0:00 \_ grep -viw error: Bind
root 5921 0.0 0.0 1516 468 ? S 15:20 0:00 \_ sed s/::ffff://
root 5924 0.0 0.0 1572 420 ? R 15:20 0:00 \_ grep -vi invalid
root 1434 0.0 0.0 4044 804 ? Ss 2006 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a shado
root 1444 0.0 0.0 4044 464 ? S 2006 0:00 \_ /usr/sbin/saslauthd -m /var/run/saslauthd -a s
root 1508 0.0 0.0 1480 392 ? Ss 2006 0:00 /usr/sbin/portsentry -tcp
root 32126 0.0 0.0 3828 1324 ? Ss 2006 0:00 pure-ftpd (SERVER)
root 32130 0.0 0.0 3568 928 ? S 2006 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr
root 3137 0.0 0.0 7008 5256 ? S 2006 0:35 cpbandwd
root 3279 0.0 0.1 10812 8312 ? SN 2006 7:40 cpanellogd - sleeping for logs
mailnull 3299 0.0 0.0 7712 5264 ? S 2006 0:34 eximstats
mailnull 32022 0.0 0.0 7348 1984 ? Ss Jan02 0:00 /usr/sbin/exim -bd -oX 26
mailnull 32030 0.0 0.0 7348 1996 ? Ss Jan02 0:20 /usr/sbin/exim -bd -q180m
mailnull 32046 0.0 0.0 7348 1964 ? Ss Jan02 0:00 /usr/sbin/exim -tls-on-connect -bd -oX 465
root 32128 0.0 0.0 3044 1176 ? S Jan02 0:47 antirelayd
root 17635 0.0 0.2 25752 23600 ? Ss Jan02 0:32 /usr/bin/spamd -d --allowed-ips=127.0.0.1 --pidfil
root 22098 0.0 0.3 29440 27060 ? S 04:20 0:02 \_ spamd child
root 9762 0.1 0.3 30216 28136 ? S 11:16 0:19 \_ spamd child
postgres 1351 0.0 0.0 16732 2148 ? S Jan21 0:00 /usr/bin/postmaster -p 5432 -D /var/lib/pgsql/data
postgres 1354 0.0 0.0 7532 880 ? S Jan21 0:00 \_ postgres: stats buffer process
postgres 1355 0.0 0.0 6540 1024 ? S Jan21 0:00 | \_ postgres: stats collector process
postgres 29997 0.0 0.1 17544 11528 ? S 09:56 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 30561 0.0 0.1 18104 11852 ? S 09:56 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 31864 0.0 0.1 17592 11532 ? S 09:57 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 32183 0.0 0.1 17496 11288 ? S 09:57 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 32285 0.0 0.1 17580 11536 ? S 09:57 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 32299 0.0 0.1 18016 11708 ? S 09:57 0:03 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 3076 0.0 0.1 18080 11732 ? S 09:58 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 5427 0.0 0.1 17488 11280 ? S 09:59 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 26225 0.0 0.1 17544 11280 ? S 10:12 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 27895 0.0 0.1 17544 11292 ? S 10:20 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
root 28058 0.0 0.1 17508 9088 ? S Jan30 0:02 cpsrvd - waiting for connections
root 29793 0.0 0.1 19096 9928 ? Ss 09:56 0:00 /usr/local/apache/bin/httpd -DSSL
nobody 29829 0.0 0.1 19408 9556 ? S 09:56 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29830 0.0 0.1 19444 9560 ? S 09:56 0:02 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29831 0.0 0.1 19448 9820 ? S 09:56 0:04 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29832 0.0 0.1 20576 9708 ? S 09:56 0:04 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29833 0.0 0.1 20572 9936 ? S 09:56 0:05 \_ /usr/local/apache/bin/httpd -DSSL
nobody 30225 0.0 0.1 19332 9472 ? S 09:56 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 31771 0.0 0.1 19452 9532 ? S 09:57 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 31872 0.0 0.1 20584 9724 ? S 09:57 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 22289 0.0 0.1 19456 9588 ? S 10:10 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 22324 0.0 0.1 19328 9464 ? S 10:10 0:03 \_ /usr/local/apache/bin/httpd -DSSL
root@ns1 [~]#
The email of my client doesnt receive certain emails from certain accounts, including my yahoo.com.ph account. After several tries I received this error instead.
After trying to send mail unsuccedfully several times, this is the error I am getting.
Hi. This is the qmail-send program at yahoo.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
:
Sorry, I couldn't find any host by that name. (#4.1.2)
I'm not going to try again; this message has been in the queue too
long.
--- Below this line is a copy of the message.
Quote:
Originally Posted by copy of email
Return-Path:
Received: (qmail 90296 invoked by uid 60001); 25 Jun 2007 04:05:27
-0000
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
s=s1024; d=yahoo.com;
h=X-YMail-OSG:Receivedate:Fromubject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID;
b=GYMZ4utbLEJMc+EXHdW5Ng5ZJeCArXAubpEaUtZzZz77STh9HAGNhrFDjgfqNJ5BdE/
SAlCQ78wseeWPTqUFlalE246OSls0L2tnadTvmxHAQiALfIJ/efHw980subD/VVk6c3NZXGKaKn3vQwJ57bHW5a6qsWjazjl6BXp5Q20=;
X-YMail-OSG:
1iaqBZkVM1mfqTKSQPqhJwf61.zXtBuozzwn.p275yXXF_KgFA8taeSyThc.P1xawEKTuVIB
Vgxk18AHBp_TxSZD753CsOSTbU56JD1OgWwBl8GCwZNxI6YhJHPfyg--
Received: from [203.177.91.252] by web32604.mail.mud.yahoo.com via
HTTP; Sun, 24 Jun 2007 21:05:26 PDT
Date: Sun, 24 Jun 2007 21:05:26 -0700 (PDT)
From: *********
Subject: test
To: sales@*********.com
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="0-357102911-1182744326=:89673"
Content-Transfer-Encoding: 8bit
Message-ID: <979097.89673.qm@web32604.mail.mud.yahoo.com>
--0-357102911-1182744326=:89673
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
test
Being using the free version of siteuptime.com but this month alone i have had so far 3 false alerts reported, i am always in the putty and does not get interrupted, and i am sure i am around on the site too while supposedly siteuptime reports down (i am guessing firewall blocks their server ip for w/e reason). So am wondering is there any really good public tracking site out there which can do public reports more accurately and not kak out on me?
Whats your experience with siteuptime for monitoring if any ? Sometimes it works "ok" other times its just off the charts.
I keep receiving emailed alerts with subject like:
"<server name> alarm level changed"
with content like:
Server health parameter "Memory > Real memory usage" changed its status from "green" to "yellow".
or
Server health parameter "Services > Apache CPU usage" changed its status from "red" to "yellow".
(and then a readout of the top command)
1) Where in Plesk can I see live alerts (or a historical log of these alerts)
2) Where can I change the settings (I think it may be too sensitive and the thresholds need to be adjusted)
3) I don't quite understand the alerts in general either, for example, the "Memory > Real memory usage", the TOP command output is for example:
top - 12:19:59 up 4:56, 1 user, load average: 0.21, 0.21, 0.21
Tasks: 255 total, 1 running, 254 sleeping, 0 stopped, 0 zombie
Cpu(s): 5.5%us, 0.7%sy, 0.2%ni, 92.8%id, 0.8%wa, 0.0%hi, 0.1%si, 0.0%st
Mem: 5967176k total, 2539756k used, 3427420k free, 134972k buffers
Swap: 4194300k total, 788k used, 4193512k free, 664916k cached
More than half the memory is unused, very little swap is in use. I don't even see a reason to be warning about this.
to upload some flash videos over to our web host.
All the videos have been uploaded to << link removed >> and in there you will seea flash_video directory, in there should be a html file where you can double click and watch the flash video.
Now go ahead and try it, click on the HTML file and click CONTINUE and try clicking on MODULE 1.. You will see a video play to the left but on the right are bunch of POWERPOINT slides that will appear as the guy continues to speak. THAT DOESNT SHOW..
Our website is hosted by xo.com
Dont know much about the plan since its my 2nd day at the job..
But here is the weird part,
i have uploaded the samething - same exact way to another web host and it plays fine, the PPTs show up fine..
What do you guys think it is?
Before someone asks about uploading methods, i tried filezilla, coreftp and cuteFTP using both ASCII and binary methods. Samething..
I see many mails in the queue lists,and from the title I think is spam.
But how I can see from which customer is?
In process,it says as client the Root
What Can I Do?
The Sending mail domain,is not hosting in us - I check it.
Hi,
I can receive emails from qmail but couldn't send out any... I checked my mail logs and found:
Nov 14 17:53:20 server relaylock: /var/qmail/bin/relaylock: mail from 11.22.333.444:37277 (server.domain.com)
Nov 14 17:53:23 server qmail: 1163498003.114915 delivery 708: failure: 11.22.333.444_does_not_like_recipient./Remote_host_sai$
Nov 14 17:53:19 server qmail-queue[11421]: mail: all addreses are uncheckable - need to skip scanning (by deny mode)
11.22.333.444 is my server ip. Why Do I got this error and how to fix it??
Anyone help please greatly appreciate.
Thank you
I recently upgraded my Qmail systems. Since Inter7 was the one who did it for me previously, I contracted them to do it. Two years ago I was very impressed, my load was a high 20s, after they finished it was in its low 4-5 with 4 CPU processors.
This time I asked for an upgrade for the Qmail in general and also its spam filters as I am getting more and more spams and the load is increasing. They stabilise the server loads, add tons of fantastic new layers of spamming protection, helped monitored and customised their scripts to my systems.
Real professionals and real knowledgeable people when it comes to Qmail. I had nothing but praises two years ago. Two years now, I have still nothing but praises.
ive been asked to use exim coz its easier to use with spamassasin.
but is exim as safe as qmail?
ive heard qmail offers better safety.
I am trying to setup qmail to handle secondary mx for 1 domain name. Panel installed is LXADMIN.
I had modified the /var/qmail/control/smtproutes and /var/qmail/control/rcpthosts, also restarted qmail.
To test this secondary mx, I had modified the domain's dns to point the first mx to something invalid like "heheeeehead.com" so that I hope it will send to the second mx which is my secondary mx.
It did send to the secondary mx but with an error as follows:
<dan@domain.com>:
Sorry, I couldn't find any host named mail.domain.com. (#5.1.2)
Its true the host mail.domain.com is invalid as I had pointed to invalid domain like "heheeeehead.com". But why doesn't the qmail wait a while and retry? Because I got the bounced back error almost immediately after I sent.
The current default value for /var/qmail/control/queuelifetime is 604,800 seconds, or 7 days.
So I'm not sure why it bounced back immediately.
But I'm not sure if this is the correct way to test backup mx.