Proxy Error While Viewing Bandwidth At Reseller Panel
Oct 20, 2007
Everytime I try to see the bandwidth in the reseller panel, i got this failure:
Code:
"Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /reseller/services/bandwidth/show_bandwidth.
Reason: Error reading from remote server"
I already restarted epld, httpd, named, and mysql daemons and the error stills...
I am wondering if any of you guys can give me some advice. I can not access my geekstorage reseller hosting panel nor will any of the sites come up on the net for me.
I think everyone else can see them but I can't access them. Geekstorage says they my IP is on the allow list and I am not blocked from their end. They said it was with my ISP.
I have embarq dsl. I called embarq this morning and they said that my ip was not blocked any way shape or form on their end. He was even able to pull up my cpanel and some of my sites. Also I can pinged from my computer to my control panel and it went through. I have done system restore on my machine thinking maybe windows update had caused something but that is not the case. Any advice would be greatly apprecaited. I have been with geekstorage several months and never had an issue accessing my accts.
I have DirectAdmin on my server but my customers have no need for it. My customers have no need to create databases, new email accounts, new users etc. etc. so I don't see the advantage of having this on my server.
Is not having Directadmin worth the extra performance and administrative chores?
Is there any way to measure and limit bandwidth on a shared hosting server without using a control panel?
How much resources does DirectAdmin use?
I heard it is not as much as CPanel but doesn't it slow down the server a little?
an recommendation on a shared hosting reseller with unlimited bandwidth(or atleast about 1500gb) and about 60-70gb harddrive? And preferably have servers in the US and europe, so i can pick one in usa and 1 in europe.
I just moved my server from one colo center to another.
The server is running debian and Layered Panel.
The only thing that changed was my two IP's.
Once I got the server up I ran a Layered Panel script
designed for changing IP's ./reconfigure domain IP1 IP2 .
After that all seemed well until I found a problem.
All the free hosted sites on my system work fine unless one uses www . For example site.myhost.com works but www.site.myhost.com causes a 502 Proxy error.
The same happens for top level domains, freehosted.com works but www.freehostedsite.com causes 502 error.
A couple lines from my error log: [Thu Mar 27 20:26:45 2008] [error] [client 86.156.43.42] proxy: DNS lookup failure for: freehostedsite.com returned by /brit.htm [Thu Mar 27 20:31:44 2008] [error] [client 69.137.107.47] proxy: DNS lookup failure for: amour.myfreehost.com returned by /petra/index.html
Bandwidth limitation button not showing in domain control panel
I am running Plesk 12.018 on CentOS 6.5. with ~75 domains hosted. All of them are allowed unlimited traffic and have Apache + Nginx installed and configured via Plesk.
Today I need for the first time to set a bandwidth-limitation for a domain, but I can't find a button for controlling it in the domain control panel.
I've checked I've mod_bw installed and have set the permissions for controlling server performance in the custom plan for the specific domain.
Someone tried to access their webmail from a remote location and got a page not found error. It did have the following error like this at the bottom though:
"HTTP 502 Proxy Error - The specified Secure Sockets Layer (SSL) port is not allowed. ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. (12204)
Internet Security and Acceleration Server"
This is a cpanel server with Centos. I did not find any info via cpanel's forums about the 502 error.
a question on mod_proxy. We're using mod_proxy as a simple reverse proxy (ProxyPass & ProxyPassReverse) to reverse-proxy various back-end PHP and Mono/.NET apps.
One problem we see is that when the back-end PHP app suffers an error (e.g. a 404 or 500) , then mod_proxy ignores the nicely-formatted custom error page served up by our PHP app, and instead serves a very plain generic mod_proxy 404 or 500 error page back to the client. Is there a way to configure mod_proxy to serve up the 500/404 error page content which is created by the back-end app ?
(We thought ProxyErrorOverride might work, but it seems to be intended for the opposite scenario, where I want to *ignore* the 404 page content from the back-end and show a mod_proxy-defined error page instead.We're using apache 2.2 on 64-bit CentOS 6.5 ( httpd-2.2.15-31.el6.centos.x86_64 )
We are getting the error from the SAP portal where we have installed Apache as a reverse Proxy on Windows server.
The Apache Server received an invalid response from an upstream server.
The Proxy server could not handle the request POST/irj/portal
Reason: Error reading from remote server -------------------------------------------------- Apache/2.4.9 (Win32)OpenSSL/1.0.1h Server at www.xyz.com port 80
Being relatively new to the Linux world, I don't exactly know why my reverse proxy settings are not working. Nothing i have tried has worked.
The code below is from my old windows server what does not seem to be working in my new 1&1 vps server. I have the below code at the moment at the bottom of my httpd_ip_defult.conf file under /var/www/vhosts/system/mydomain.com/conf/
The following errors also show up in my vhosts error log:
Code:
[Sun Oct 12 23:30:56 2014] [error] (70007)The timeout specified has expired: proxy: HTTP: attempt to connect to xxx.xxx.xxx.xxx:8008 (xxx.xxx.xxx.xxx) failed [Sun Oct 12 23:30:56 2014] [error] ap_proxy_connect_backend disabling worker for (xxx.xxx.xxx.xxx) I also have mod_proxy.so , mod_proxy_http.so and mod_proxy_html.so all enabled in my main httpd.conf file at /etc/httpd/conf/
Basically, I need to fix this urgently as a core feature of my site relies on this setup.
When accessing a backup in backup-manager in a user subscription via a reverse proxy (eg. plesk panel is called as localhost:8443) I get following error:
Internal error: Failed to exec pmm-ras: (array ( 'code' => 127, 'stdout' => 'Transport error: File 'clients' not found ', 'stderr' => '', )). Message Failed to exec pmm-ras: (array ( 'code' => 127, 'stdout' => 'Transport error: File 'clients' not found ', 'stderr' => '', )). File Connector.php Line 227 Type PleskPMMResponseException
This happens when I try to download the backup and also when clicking on the backup name. These are the apache settings for the reverseproxy domain:
SSLProxyEngine On AllowEncodedSlashes On <Location /> ProxyPass https://localhost:8443/ ProxyPassReverse https://localhost:8443/ </Location>
i try to restore a backup from another hosting to my server and always get stucked on "restoring reseller privs"
i'm using restorepkg username and got this error
Code: not a reference at /usr/local/cpanel/Cpanel/CachedDataStore.pm line 27 at whm i can transfer multiple account and select "skip restoring reseller privs" but in this case my old hosting doesnt provide ssh access.
i was wondering is there any paramater to skip that? something like
I'm not sure if this is the right forum, or if anyone can suggest a message board where I might get support on this.
This is what I have. I have Apache and IIS both running on Windows 2k3.
Apache is running in reverse Proxy mode sending multiple domains/virtual hosts to IIS.
Code:
ProxyRequests Off <VirtualHost *:80> ProxyPreserveHost On ProxyPass / http://localhost:8080 ProxyPassReverse / [url] ServerName mydomain.com
</VirtualHost> Now, if I type in [url]everything works great and IIS (listening on 127.0.0.1:8080) serves the page. However, I am doing custom error trapping, so when I type in [url](and /mydirectory doesn't exist on IIS) I need to fire ASP code (via custom error messages/handling) on the IIS server and then present a data driven page.
However, Apache is returning A 502 error:
Code: Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request GET /mydirectory.
Reason: DNS lookup failure for: localhost:8080mydirectory Is there a way for me to setup Apache to pass all error checking to IIS while using it as a reverse proxy?
I think my server underwent a DDoS attack a couple weekends ago. Anywho, I get over 300 CRON emails with this error in it, they were supposed to be sent over the several weeks, I Hard-rebooted my server and it then finally sent all those emails at once. Running Debian 7.8. The email said this:
We are getting an error every time that i try to add a new IP on Plesk panel. I go to "Tool and settings" than "IP address", "Add ip address" on fields i already try to ip:
xx.xx.xx.xx/32 and xx.xx.xx.xx/submask
every time that i click on OK, the button become loading an never finish....
After a fresh install on a Debian Wheezy system, I get the following error(s) when trying to access the control panel.
https://sub.example.com:8443/ 404 Not Found Nginx
My log
Code: 2014/06/09 19:04:15 [warn] 32236#0: conflicting server name "" on 0.0.0.0:8443, ignored 2014/06/09 19:04:26 [error] 22597#0: *43 "/usr/share/html/index.html" is not found (2: No such file or directory), client: 68.51.77.126, server: , request: "GET / HTTP/1.1", host: "sub.example.com:8443"
We have been using Apache 2.2.x with reverse proxy modules for our clients to access their OWA servers for over a year. I want to get us to Apache 2.4.x so I setup a test box with latest 2.4 on it. I fixed the config file issues since 2.4 has changes in it. OWA proxy is working on my test server with Apache 2.4. But with 2.4 I do have an issue I cannot figure out. Note that this does NOT occur with Apache 2.2. I get the following errors when using ActiveSync through reverse proxy:
[Thu Oct 17 12:19:11.670665 2013] [proxy_http:error] [pid 748:tid 8440] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : [client x.x.x.x:20311] AH01102: error reading status line from remote server mail.nameredacted.net:443 [Thu Oct 17 12:19:11.670665 2013] [proxy:error] [pid 748:tid 8440] [client x.x.x.x:20311] AH00898: Error reading from remote server returned by /Microsoft-Server-ActiveSync
So somehow with Apache 2.4 there is some sort of timeout that was not there with 2.2.
I have a V-Server account with Strato and just upgraded to 12.0.18 through the panel updater. The installation completed successfully, at least the installer gave me no error.
After the installation I tried to login and got the following error (I wasn't able to enter my credentials..):
Which worked and I could now login. The Panel opened with the following error:
I can access certain areas of the panel without error (i.e. tools and settings etc, but I get the error when I try to access the control panel for single domains etc...)
I am getting following error after to login to my Cpanel, Please advice me the solution. thanks is advance.
======================================================== Unable to understand response from admin bin: reseller sent: RESELLERSUSERS root received:[]: Illegal seek at /usr/local/cpanel/Cpanel/AdminBin.pm line 140. Cpanel::AdminBin::adminfetch('reseller', 'ARRAY(0x9f77224)', 'RESELLERSUSERS', 'storable', 'root') called at /usr/local/cpanel/Cpanel/Resellers.pm line 36 Cpanel::Resellers::Resellers_accountlistopt() called at /usr/local/cpanel/Cpanel/RvresellersC.pm line 63 Cpanel::RvresellersC::RvresellersC_accountlistopt() called at (eval 84) line 1 eval 'Cpanel::RvresellersC::RvresellersC_accountlistopt(@{$argref});' called at cpanel.pl line 1648 main::exectag('<cpanel RvresellersC="accountlistopt()">') called at cpanel.pl line 4797 main::dotag(undef) called at cpanel.pl line 4664 main::cpanel_parseblock('SCALAR(0x90e7c8c)') called at cpanel.pl line 4616 main::cpanel_parse('GLOB(0x93b4f40)') called at cpanel.pl line 2912 main::doinclude('rvbranding/newssessionLayout.html', 2) called at cpanel.pl line 1673 main::exectag('<cpanel relinclude="rvbranding/newssessionLayout.html">') called at cpanel.pl line 4797 main::dotag(undef) called at cpanel.pl line 4664 main::cpanel_parseblock('SCALAR(0x90fdeb0)') called at cpanel.pl line 4616 main::cpanel_parse('GLOB(0x9388638)') called at cpanel.pl line 1309
I'm using Plesk 11 in a Ubuntu 12.04 Linux environment on a remote dedicated server. I am NOT trying to upgrade to Plesk 12. But, every time I log onto the panel, I get the error message shown on the subject line. Afterward, it says, "To solve this problem, send an update log to Parallels support." I have the update log ... but "where" to send it. Is there an email address? A webpage?
the Error Code is :SQLSTATE[HY000]: General error: 1030 Got error -1 from storage engine Knowledge base says I am out of storage but I am not .But the output of command df -h returns this:
Restarting sw-cp-server doesn't shows any error.However , I was getting some problems with mysql socket and I wasn't able to use the plesk still then currently a custom installation of phpmyadmin lets me access the databases but I can't access any of my websites either (Wordpress). Apache returns 504 Gateway Error .
I have experiencing strange behaviour of Plesk admin panel. Actually there were a lot of issues similar with 500 Internal Server error but mine is a bit different..
This is the log came from the '/var/log/sw-cp-server/error_log'
As you can see there is a line starts with /bin/sh: /usr/share/sw-cp-server/applications-conf.sh: Permission denied and i tried to change this one for permission like 0755 or alternatives for a run but nothings changed. Btw i have plenty of disk space, it wasn't also the case.
I cannot even login with my domain name without 'https' and with the port 8880. It's again giving me the same issue.
BTW i want to give a little extra information; it was a long time that Plesk admin panel working but after today it's stuck in 500 Internal server error. What i tried today that to follow 'How to generate custom self-signed SSL certificates and apply it to Postfix: [URL] ....' , but after 6th step i was decied to stop because i couldnt find the root.pem file a minute and than i wanted to try on plesk and i saw the bad news I don't know it was related but i wanted to share.
I downloaded an Apache log for my site in the .gz format on a Windows XP laptop.
How can I view it? Are there any text editors or special log viewers that will allow me to view the file. Or does it need to be unzipped because it's a .gz file?
i recently set up a new testing web server(iis6), but can't view any of my websites hosted on my mac (osx leopard). I can ping the server from the mac, and RDP with out any problems, just can't view any websites. i've tried using the ip of the server (192.168.1.15) in the browser the server name but still no luck. server firewal has been disabled
