Plesk Automation :: Bug Report - Wget Missing When Installing A New (backup) Node
Apr 1, 2014
I brought up a basic centos 6.5 install in desire to add it to my ppa cluster.
The ppa installation task failed because wget was missing on the new node. The error message made it easy to fix (yum install wget) but thought I'd report it so that your pre-req scripts can check and install it for future users.
We have one Cloud Server hardware node that exists only as the backup location for containers and VMs in Cloud Server/PVA (it hosts no virtual servers). Can it also serve as a Backup Server Node?
A related question, in my case, is whether we can configure a Backup Server Node to use a particular drive/mount/directory, as we can with PVA? I couldn't find any info in the docs about any settings at all for the Backup Server Node.
Due to data center limitations, I am restricted to 100GB on my primary disk but can have up to 2TB on a second disk.Is it possible to have the backup node use the second disk instead of the primary disk?Also is it possible to have multiple to have multiple backup nodes?
We are trying to add new service node but when we are trying to finish procedure we receive error: The usage of the resource "IP addresses" for subscription with ID "1" exceeds the value of "0".
We do not have a such subscription using ID "1". As I can see this is the ID in database for "Parallels Automation License Key", but it has unlimited license key and have already two nodes attached.
Are there any special practices to reboot a node in PPA?
So far a simple "shutdown -r now" hasn't broken anything but I want to make sure PPA doesn't make assumptions about the nodes being up at any point. (both management and service)...
it is possible to run services such as Apache, Mail, MySQL etc on the Management Node.
I have PBAS setup and have registered the PPA server with PBAS, the PPA Management Node is marked as ready to provide, I have added the appropriate attributes to the MN under Service Nodes, however according to PBAS I need to install the ppa_apache package (and probably others), and when I go to install the packages it's trying to install the ppa_agent package which is conflicting with ppa_core.
I have some problems adding a database and a webserver service-node:
Mar 19 13:44:13 plesk-db : DBG [SYSTEM 4:6600:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'. Mar 19 13:45:50 plesk-www : DBG [SYSTEM 3:9054:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'.
We want to configure our PPA mail node to send all outbound mail through our spam filtering appliance but don't know where to start.
Reading standard Postfix docs give basic instructions on how to direct a handful of domains through a mail relay but we want to direct every outbound email from all domains through our spam filter.
We also want to ensure that any regular updates to the mail node won't break or undo this config.
im getting an error when im trying to create a subscription on a windows node via PPA management node, the task error is:
Method name: registerIpPlesk on SCREFleskWebIIS:0 Last execution output: This IP address XXX.XXX.XXX.XXX is already registered in Panel on the network interface Local Area Connection
the IP XXX.XXX.XXX.XXX is the correct service node IIS ip address..
We have a PPA environment with 7 service nodes (one management node, two web-, two database- and two e-mail servers). We also have 2 variants of hosting, a consumer and business variant.
We want separate the consumers from the business variants on the service nodes.
I want to use webserver1, databaseserver1 and emailserver1 for consumer hosting and webserver2, databaseserver2 and emailserver2 for business hosting
I want to make two service templates, one consumer and one business template.
Is it possible to configure ppa : When we subscript a consumer template, everything must provision only on the consumer service nodes automatically (web01, db01 and email01) and not on the business services nodes.
It has been bought to my attention during our upgrade planning, that PPA & Plesk Panel do not offer the functionality for setting up a backup MX servers. In our current configuration we use Sendmail as both secondary and tertiary MX servers. These are manually configured and prone to configuration mistakes.
Multiple scenarios need to be taken into consideration.
Scenario 1: Hosters Plesk hosted primary mail server + secondary & tertiary mail servers. Scenario 2: Client hosted primary mail server + hosters secondary & tertiary mail servers.
I am looking for alternate ways for backup / secondary MX servers for our planned PPA / Plesk deployment. An automated solution would be ideal, but we are falling short trying to find a solution to streamline the process and remove margin for error.
I am getting this error after installing the AfterLogic WebMail Pro_7 app on a domain.
I removed the app but AfterLogic still appears in the list of available Webmail options. I am getting the error even after changing all my domains to use Roundcube.
backup_info_1406131330.xml: Line 423 error: Element 'external-webmail': This element is not expected.
My backups since the day I installed that app are no longer valid.
[LOGTEE]: Error Downloading Packages: [LOGTEE]: [LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is: 2.6.6 (r266:84292, Jan 22 2014, 09:42:36) [GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
Our Server doesn't show the Traffic History under "Tools & Settings -> Summary Report -> View Traffic History", but for every Domain it runs.
We Migrate this Server from a Dedicated to an OpenVZ Server - on another Server with OpenVZ its running without Problems, but this one we don't migrate.
I have a website works with Crystal Report, it worked with Windows server 2008 and Plesk Panel 10, now I upgrade my windows server to 2012 and plesk 11.5 and I gave this error: Server Error in '/' Application.....Please see the attached file (Error Image)
I check many things, for example I run the website on windows server 2012, just With IIS and it works fine, then I install the plesk 11.5 and take the error again.. now I sure 99% the error related to plesk....
WARNING during statistics_collector execution: : statistics_collector: Unable to get dir size of /var/lib/mailman/lists/14 System error 2: No such file or directory statistics_collector: Unable to get dir size of /var/lib/mailman/archives/private/14.mbox System error 2: No such file or directory statistics_collector: Unable to get dir size of /var/lib/mailman/archives/private/14 System error 2: No such file or directoryClick to expand...
How do you reset the outgoing mail limits report?I have been doing some testing and I don't want the report to show that some of my domains are over their limits.
Plesk Panel, 11.0.9, #61, Windows 2008 R2 SP1, x64
PROBLEM: With reports configured to send out to an email address local on the Windows server configured through PLESK, if local relay isn't enabled at 127.0.0.1 on the SmarterMail server, the reports are never delivered.
- server is [domainx].com - email to receive reports from PLESK is plesk444@[domainx].com -this email address is able to send and receive internally or externally to and from any client w/ SMTP auth enabled.
If SmarterMail is configured with SMTP Authentication Bypass for 127.0.0.1, we get the scheduled report emails as we should. Without the SMTP Authentication Bypass enabled, none of the clients or administrators get any reports or notifications at all.
QUESTION: How can I configure PLESK Panel 11 itself to use that SMTP Authentication to send those reports out? --is there a configuration file or registry value I can add or modify?
On the dashboard (intro page) there is the option "Outgoing Mail Control" and there the link "See report". When clicking on "See report" I get a "Warning: Permission denied." error message when being logged in as the full administrator. Is this due to an error in an update or what is going on here?