Due to data center limitations, I am restricted to 100GB on my primary disk but can have up to 2TB on a second disk.Is it possible to have the backup node use the second disk instead of the primary disk?Also is it possible to have multiple to have multiple backup nodes?
View 3 RepliesWe have one Cloud Server hardware node that exists only as the backup location for containers and VMs in Cloud Server/PVA (it hosts no virtual servers). Can it also serve as a Backup Server Node?
A related question, in my case, is whether we can configure a Backup Server Node to use a particular drive/mount/directory, as we can with PVA? I couldn't find any info in the docs about any settings at all for the Backup Server Node.
I brought up a basic centos 6.5 install in desire to add it to my ppa cluster.
The ppa installation task failed because wget was missing on the new node. The error message made it easy to fix (yum install wget) but thought I'd report it so that your pre-req scripts can check and install it for future users.
Any workaround for AWS and adding nodes for PPA. Since the AWS instances use key pairs for root access you can't ssh as root with a password.
View 3 Replies View RelatedWe are trying to add new service node but when we are trying to finish procedure we receive error: The usage of the resource "IP addresses" for subscription with ID "1" exceeds the value of "0".
We do not have a such subscription using ID "1". As I can see this is the ID in database for "Parallels Automation License Key", but it has unlimited license key and have already two nodes attached.
Are there any special practices to reboot a node in PPA?
So far a simple "shutdown -r now" hasn't broken anything but I want to make sure PPA doesn't make assumptions about the nodes being up at any point. (both management and service)...
How to change IIS password after node is added to PPA using wizard..There is no option to change password after adding the service node.
View 2 Replies View Relatedit is possible to run services such as Apache, Mail, MySQL etc on the Management Node.
I have PBAS setup and have registered the PPA server with PBAS, the PPA Management Node is marked as ready to provide, I have added the appropriate attributes to the MN under Service Nodes, however according to PBAS I need to install the ppa_apache package (and probably others), and when I go to install the packages it's trying to install the ppa_agent package which is conflicting with ppa_core.
I have a problem to install a service node. In task, I have this error:
Unable to authenticate at the host '10.252.13.197'. To resolve this issue, please follow the instructions at [URL] ....
I followed the instructions, but mysql don't display my new server.
[root@plesk000-exp-01 ~]# mysql -uadmin -p`cat /etc/psa/.psa.shadow` psa -e 'select accessKey from ServiceNodes where ipAddress="10.252.13.197";'
[root@plesk000-exp-01 ~]#
I deleted service node but the problem still remains.
install such extension as Watchdog (available on PPP) on PPA Service nodes (or maybe as a Watchdog Server on Management node)?
View 2 Replies View RelatedI have some problems adding a database and a webserver service-node:
Mar 19 13:44:13 plesk-db : DBG [SYSTEM 4:6600:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'.
Mar 19 13:45:50 plesk-www : DBG [SYSTEM 3:9054:f6affb70 lib]: [SMConfig] {module_id="Common"; code="1"} Internal error: SAXParseException while parsing /usr/local/pem/etc/service_config.xml: element 'SERVICE_CONFIG' is not allowed for content model '(SERVICES)'.
Content of the service_config.xml
Code:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<!DOCTYPE SERVICE_CONFIG PUBLIC "SM" "SM 1.0">
<SERVICE_CONFIG/>
We want to configure our PPA mail node to send all outbound mail through our spam filtering appliance but don't know where to start.
Reading standard Postfix docs give basic instructions on how to direct a handful of domains through a mail relay but we want to direct every outbound email from all domains through our spam filter.
We also want to ensure that any regular updates to the mail node won't break or undo this config.
I have a full mail node and I have to move some domains on a different node without losing data . Is possible with PPA?
View 3 Replies View Related im getting an error when im trying to create a subscription on a windows node via PPA management node, the task error is:
Method name: registerIpPlesk on SCREFleskWebIIS:0
Last execution output: This IP address XXX.XXX.XXX.XXX is already registered in Panel on the network interface Local Area Connection
the IP XXX.XXX.XXX.XXX is the correct service node IIS ip address..
Is it possible to update the MySQL version on the db nodes from 5.1 to 5.5 or is it supported?
View 3 Replies View RelatedWe have a PPA environment with 7 service nodes (one management node, two web-, two database- and two e-mail servers). We also have 2 variants of hosting, a consumer and business variant.
We want separate the consumers from the business variants on the service nodes.
I want to use webserver1, databaseserver1 and emailserver1 for consumer hosting and webserver2, databaseserver2 and emailserver2 for business hosting
I want to make two service templates, one consumer and one business template.
Is it possible to configure ppa : When we subscript a consumer template, everything must provision only on the consumer service nodes automatically (web01, db01 and email01) and not on the business services nodes.
It has been bought to my attention during our upgrade planning, that PPA & Plesk Panel do not offer the functionality for setting up a backup MX servers. In our current configuration we use Sendmail as both secondary and tertiary MX servers. These are manually configured and prone to configuration mistakes.
Multiple scenarios need to be taken into consideration.
Scenario 1: Hosters Plesk hosted primary mail server + secondary & tertiary mail servers.
Scenario 2: Client hosted primary mail server + hosters secondary & tertiary mail servers.
I am looking for alternate ways for backup / secondary MX servers for our planned PPA / Plesk deployment. An automated solution would be ideal, but we are falling short trying to find a solution to streamline the process and remove margin for error.
I'm trying to upload backup ms sql server file. But the Control panel tells me error: "Error: copy_file failed: filemng cp failed:"
"The issue usually occurs due to exceeded disk quota. Check it."
I am trying to install Automation, and I keep getting an error after the "Getting SELinux" step, here is a log of the process so far:
Code:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-5-x86_64
[INFO]: Getting SELinux state...
[ERROR]: Unexpected error: ''
[Code] ....
I have tried running the installation on a different server and the same issue came up...
I am installing plesk automation on centos 6.5 using this command on a fresh system
./ppa_installer --password some_password --admin_email some_email
and get the following error.
[LOGTEE]: Error Downloading Packages:
[LOGTEE]:
[LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
Looks like some lib is not found in the mirrors.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is:
2.6.6 (r266:84292, Jan 22 2014, 09:42:36)
[GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
Installing packages task failed. The log fails on:
Installing packages
Loaded plugins: fastestmirror, rhnplugin
Loading mirror speeds from cached hostfile
* cloudlinux-x86_64-server-6: cl-mirror.krystal.co.uk
* elrepo: mirrors.coreix.net
Running rpm_check_debug
Fatal error during packages installation: Test Transaction Errors: package mysql-libs-5.1.73-3.el6_5.x86_64 (which is newer than mysql-libs-5.1.71-1.el6.i686) is already installed
How can we get it to continue?
im trying to migrate my plesk 11 linux server (i installed the PPA Moving Tools) but when im running the assimilate command: ppa-assimilate generate-migration-list config.ini...im getting this error:
[root@server ~]# ppa-assimilate generate-migration-list config.ini
[2013-08-30 00:40:54] [INFO] | Initialize migrator
[2013-08-30 00:40:54] [INFO] | Load configuration
[2013-08-30 00:40:54] [INFO] | PPA host: XXX.XXX.XXX.XXX
[2013-08-30 00:40:54] [INFO] | CBM URL: https://XXX.XXX.XXX.XXX:8443/plesk-billing/direct-api.php
[code]....
Today i setup a test environment. I have all fresh OS installs today. Management node is Centos 6.5 with PPA 11.5 update 2
I go to servers > add > choose IIS role. The Server is Windows 2012 R2, I have disabled Windows Firewall and disabled UAC, and rebooted it before trying to setup on PPA.
Enter IP and i get the following error.
Code:
Automated WinRM Enabling Failed
Error during WinRM enabling on '192.168.1.101'. Script exit code is 1. Script output (stdout/stderr): ERROR: Cannot open control pipe - NT_STATUS_INVALID_PARAMETER
Failed to install winexesvc
/
Repair Connectivity
To make automated deployment possible please try to check network communications between Management and target nodes. Ensure that WMI is not blocked on a target node. Or copy, paste and invoke the following script on a target node.
netsh advfirewall firewall add rule name="WinRM in" protocol=TCP dir=in profile=any localport=5985 remoteip=any localip=any action=allow
netsh advfirewall firewall add rule name="POA in" protocol=TCP dir=in profile=any localport=8352 remoteip=any localip=any action=allow
[code]...
However, it does create several roles in windows firewall so PPA can connect and sucessfully created X number of rules.I too disabled IPTables on management node.
I'm trying to install PPA on a server, but I'm getting an error during installation:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-6-x86_64
[INFO]: Getting SELinux state...
[Code] ....
I get the following message if i try to migrate a domain from a Windows Plesk (9.5.5) to PPA:
[2014-04-22 11:25:39] [ERROR] check-infrastructure/mydomain.com| The mssql database DATABASENAME from SourceSQL:0 will not be copied to external DB server at x.x.x.x:1433 - this is not implemented.
But this should have been fixed in MU#4 as mentioned in [URL] ....:
[-] Users could not migrate to PPA 11.5 if PPA used an external Microsoft SQL Server (which was added through Infrastructure > Database Servers). (PPA-771)Click to expand...
im trying crate small remote application for manage plesk planel. and need xml api command simile to this :
<?xml version="1.0" encoding="UTF-8"?>
<packet version="1.5.0.0">
<server>
<set>
<result>
<status>ok</status>
</result>
</set>
</server>
</packet>
for get all domain present on my server !
I have server that has a SINGLE customer on it - this is not economical to run under PPA - how do I remove it from the PPA management and not disrupt the current site/email on it?
The plan is to run it on webmin - there is no way it can justify PPA for 1 site.
How can i migrate best multiple confixx server to a PPA environment?
I have read migration confixx to ppa is not directly supported, is that right? Can i first migrate all confixx server to one plesk server and migrate in a next step all to ppa or should i migrate step by step each confixx server to a plesk server and after this migrate to ppa?
Who can handle plesk/PPA the multipe username? (server1 with user: web1 | server2 with user: web1) ?
We have one server don't want to touch the php on - how can we upgrade our PPA cluster and leave the one server alone - or at least exclude it from upgrading PHP/mySQL/Apache?
View 4 Replies View RelatedI have a pretty new install of PPA with a Windows 2012R2 IIS Web servers. I just noticed it has Java 1.7.0 Update 25 installed which has A LOT of vulnerabilities. Can I safely upgrade this?
Suggestion: If something is installed/required by PPA it should also be kept up2date by PPA.
This kind of stuff makes me quite worried about anything installed by PPA on any of my nodes including Linux.
Do you have a team at Odin that makes sure everything is up2date and safe?