Plesk 11.x / Windows :: Control Panel With Crystal Report
Jan 9, 2014
I have a website works with Crystal Report, it worked with Windows server 2008 and Plesk Panel 10, now I upgrade my windows server to 2012 and plesk 11.5 and I gave this error: Server Error in '/' Application.....Please see the attached file (Error Image)
I check many things, for example I run the website on windows server 2012, just With IIS and it works fine, then I install the plesk 11.5 and take the error again.. now I sure 99% the error related to plesk....
View 1 Replies
ADVERTISEMENT
Jan 30, 2013
I Have a WinServer 2008R2SP1 with plesk 11. I am able to access to PControl panel with https://localhost:8443 but not from outside the server (https://serverIP:8443)
The firewall if OK, allowing port 8443.
View 4 Replies
View Related
Oct 22, 2014
Ive bought a wildcard certificate, and its working fine when i use URL....But it does not work when i go to hURL.... seems like the control panel chosing a default one for this.
Ive tried to make the certificate server default, changed the one in ip section to the wildcard one, and made the woldcard one default, nothing changed..
View 1 Replies
View Related
Jun 29, 2012
after upgrading to plesk 11 i get this error (Image attached)
so basicaly i cant do nothing..
View 3 Replies
View Related
Aug 20, 2014
Plesk Panel for Windows 11.5
Windows 2012
MailEnable 7.5
- Is it possible to secure webmail with SSL through the Plesk Control Panel?
- Is it possible to secure webmail per domain with SSL through the Plesk Control Panel?
View 2 Replies
View Related
Jun 7, 2014
I'm Unable to Login to Control Panel, this issue started few days back, in that time i'm using Plask v11.5, When i try to log in browser try to log in and few minutes after it showing Error 500, Application error, I try to run reconfigurator.exe to verify & fix the Plesk installation, everything updated fine but issues still exist today i decided to upgrade to v12 and i upgrade to V12, everything installed fine and but still login issues there.
This time whey i try to login, i'm not getting any error message, but after some time i got mail from the server "alarm level changed. Server health parameter "Services > Plesk CPU usage" changed its status from "green" to "red"."
View 3 Replies
View Related
Aug 12, 2013
I would like to know how to change http://mydomainname.com:8880 to http://mydomainname.com/somethingelse?
View 4 Replies
View Related
Apr 29, 2013
I can not log into to plesk right now. It's display message " Unable to read Control Panel configuration file: date_default_timezone_get() [function.date-default-timezone-get]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_ timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier.We selected 'Asia/Krasnoyarsk' for '7.0/no DST' instead".
View 1 Replies
View Related
Aug 29, 2014
I'm unable to access my plesk control panel .its giving this error "Unable to read Control Panel configuration file";tried all available solution for permissions but the problem remains.
View 3 Replies
View Related
Oct 28, 2009
is there a free control panel for windows 2008 server besides dotnetpanel? I tried installing MS SQL and got errors. So I installed MySql instead..and just need a control panel to run it.
View 1 Replies
View Related
Jul 18, 2009
cPanel has recently released beta version of "Enkompass". It offers a web hosting control panel system for Microsoft Windows server-based hosts. For more details take a look at [url]
View 4 Replies
View Related
Jul 7, 2008
Whats the best Control Panel for Windows 2003 like cPanel except from thats for Linux but i want a Control Panel for Windows 2003 Web Server. I know their is Plesk & HELM but is their anymore and which is the best one?
View 14 Replies
View Related
Oct 11, 2007
I indicated that I've basically been using my webhosting company as "file storage".
1) I create all my files in .html using notepad
2) My files are limited to .html, .jpg, .gif, (and a couple of .js and .css) files.
3) My domain is not connected with my webhost; I use the nameserver zoneedit.com and I use URL forwarding and mask/cloak the domain the address bar (using multiple domains) as follows:
domain1.com --> forwards to [url]
domain2.com --> forwards to [url]
domain3.com --> forwards to [url]
4) For uploading files, I go to ftp://123.456.78 and drop/drag/copy/paste files into the window using my browser
5) I'm able to password protect the subdirectories as I choose.
---------------
I called my webhost, Hostik, and told them that I was unable to do anything on my web console. I can't change a password, create a user, or even access my usage/bandwidth quotas.
They told me that I'm on an "old server" using the windows-based console (probably C-Panel / Control Panel) and they're in the process over the next three months of transfering everyone over to "Plesk".
So, they set me up with a new Plesk account, while keeping the old one in place, so that I could move/transfer my files to the Plesk account.
When I went to Plesk, I realized things are not the same:
1) In my Control Panel / C-Panel, I had a unique IP URL Address - [url]
2) In Plesk, it seems there's a set IP URL Address - [url] - that everyone shares.
3) I was told that in Plesk, many people use that IP URL address and that I'm supposed to place my files into the "httpdocs" folder.
Appearently, this is a system of shared hosting whereby many people have the same IP URL address (different from what I had before) and it recognizes each account by the login or something, so the "httpdocs" folder would identify my domain.
I was then told that in Plesk, I must have my domain affixed to the Plesk account.
In other words, I can no longer do what I was doing before, having my domain separated in another location and using URL forwarding from an outside nameserver.
--------------------------
So, my original question is what's the difference between Plesk vs. C-Panel/Control Panel?
Perhaps I answered most of it above.
Is it correct that I can't do things the way I've been doing them so far if that's the case?
It might be that Plesk is not for me and I may need to find a host that gives me my own unique IP URL Address. However, I was informed that not many companies are doing that as most are switching over to Plesk.
In addition, Hostik does not offer multiple domains.
In response to this thread, David recommended I try synhosting.com
synhosting.com has "Multiple Websites". I assume this means mulitiple domains. Correct?
What's my best option at this point?
1) Find a host that has C-Panel / Control Panel (if any there are)?
2) Use a service such as synhosting.com and move all my domains over to them?
3) If I do use synhosting.com, am I required to move my domains over to their nameservers?
4) I have my MX Mail records pointing to Fastmail.fm for my email virtual domains. Would I still be able to do this if my domain is dedicated to a webhost and opt not to use their email feature?
5) Should I get rid of this old-school thought of using my web host as "file storage" and stop this practice of using URL forwarding and cloaking?
View 7 Replies
View Related
Dec 10, 2007
I asked my current vps supplier about changing the certificate used to secure the plesk control panel as the default one causes certificate warnings. Their response was "dont worry about the warnings, the control panel is secure and trying to address the error can cause problems in plesk itself".
Is this correct?, I know the cp is still secure but customers arent going to think ssl certificate warnings are OK. I think their response was more of we cant help you so dont worry about it type response (a.k.a the brush off)
Is this an issue with plesk? vps is windows server 2k3
View 1 Replies
View Related
Sep 10, 2014
after the login page, a blank page appears and I can't access to the Plesk Control Panel :
in the file : /var/log/sw-cp-server/error_log
2014/07/09 14:45:04 [error] 7422#0: *3551 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 91.204.25.4, server: , request: "GET /admin/ HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "91.204.25.4:8443", referrer: "https://91.204.25.4:8443/"
View 7 Replies
View Related
Nov 16, 2014
I have 12 domains in my control panel but i only see 5 domains in my control panel but all 12 domains are working they are up but only see 5 in control panel....
View 7 Replies
View Related
Apr 15, 2008
switched to ipower.com and not getting any help - really stuck as my customer wanted better spam filtering so I went to them on a recommendation and I do not know how to turn on and what is the best setting for spam filtering with their panel. Also using HORDE where I can set a filter using rules but it only works if I log on and hit apply filter so my customer still gets it in his in box -
View 2 Replies
View Related
Jun 7, 2014
Currently we host a site constructor tool with a dedicated panel and we would like to add email hosting using PPA services.
We have already installed the system and customized the PPA panel which will be accessed by our panel.
We would like to know if it is possible to use Single Sign-On (SSO) access on some manner (with PPA API or other module), so our customers don't need to enter with user and password again to administrate their e-mail accounts.
View 1 Replies
View Related
Apr 8, 2015
I've installed PHP-FPM into Plesk 12 and it is showing as a running service. However I can't find any way of enabling it per site at all. I'm still just getting the 3 standard PHP options:
Apache module
CGI application
FastCGI application
The documentation states the option would be available on a per-site basis but it isn't.
View 3 Replies
View Related
Apr 17, 2015
I've been having a few issues with the control panel navigation is running slow even though I have heaps of resources available and free. The server is located locally and have no problems surfing websites attached to the same server.
When I login as admin, it can take 25 seconds to load into the first screen.
CPU GenuineIntel, Intel(R) Xeon(R)CPU E5649 @ 2.53GHz
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
Memory Available 6GB used 2.5-3GB
HDD: 300GB/ approx 130GB Free
I have tried issuing a /etc/init.d/psa restart command and has made no difference.
View 1 Replies
View Related
Nov 14, 2014
Why can i login with two different passwords for the user admin in plesk control panel?
View 1 Replies
View Related
Jul 2, 2014
Plesk Panel 12.0.18 , cant load pages in controlpanel (web host edition) it is making timeout all the time and also cannot send mail (roundcube).
What have parallels done to the a nice panel!
View 4 Replies
View Related
Dec 8, 2014
Domains are not showing up in control panel but they are working...
View 1 Replies
View Related
Mar 26, 2015
My Plesk installation and websites are slow
OVH VPS
8G ram
100 G Harddisk
View 6 Replies
View Related
Jul 4, 2015
I added a new domain to an existing subscription. I added the domain website as a forward to a domain that has frame forwarding to another domain.
When I go into domains, I can see the domain, but when I open it in control panel, I cannot find the domain.
I need to completely remove it at this point, but can find nowhere to make this happen.
View 1 Replies
View Related
Apr 12, 2015
I am unable to log into the Plesk Control Panel.
After logging in, it appears that a sign-out request is executed. No error messages are shown.
Plesk: 12_0_18
View 2 Replies
View Related
Dec 11, 2014
We need to add visitor tracking code to the Control panel so we know who's using it and we can prompt inline chat etc. for support, but where to start.
The code is a mixture of Div tags and Java script.
How we can add this as there is no common footer file to drop the code in to.
View 2 Replies
View Related
Sep 20, 2014
I have been a solid cPanel / WHM user for the past 2 years, we have now since downsized our hosting requirements and also wanted to cut our panel costs and so we moved to PLESK 12 Web Edition.The server is on a trial license and has been working fine with no problems for the past 2 weeks. Today all of a sudden none of the websites are accessible, although I can ping all IP's on server and login via SSH.I cannot access any websites or hosting control panel, I have disabled IP tables as this was the cause of a problem last time.
Why this happened was there an update at around 5AM this morning which could have caused this?I have restarted the server, I can successfully ping / resolve address from SSH.
View 3 Replies
View Related
Apr 22, 2015
I purchased a Host license.Major customers in China. There is a facebook link in the panel.But China does not allow access facebook. This leads to a very slow access speed! Can I remove this link? If so, how to remove?
View 1 Replies
View Related
Aug 21, 2014
I have server with the Plesk control panel on Linux server and want to install ffmpeg but not sure about the steps to install it. Any script or easy steps to install ffmpeg on my server.
View 1 Replies
View Related
Apr 9, 2015
How change control panel url port (8443 to 9859)?
View 15 Replies
View Related
