I wonder how to manage multiple aliases for one mail account through plesk API.
Here you describe, that alias is a "string" field: [URL] ....
I've tried comma separated values, it didn't work.
I installed Route 53 extension to manage a slave DNS server but when a add or remove some domain the process does not complete, Plesk stays loading without finish domain creation.
When I disable the extension, Plesk create and remove domains without any problem.
What could be happening?
I have two domains as virtual hosts on same IP address.
I am getting certificate error for the second domain when I try to check email (using MS Outlook). I can't permanently "accept" certificate, it complains again and again. Certuficate I created and self signed for imap.domain1.com, but the second email server is imap.domain2.com, so it complains.
How do I set separate email certificates for two domains? Is it possible at all?
I've just put all my own domains on their own server, away from my clients' domains.
I don't really want to go through 60 Cpanel accounts creating an email address for myself in each.
Is there a way to create a single pop account in each account? I seem to recall there's a way to change the default email address to fail: or blackhole: server-wide so I guess there'll be a way to create a mail account.
I am looking for access to a specific environment and I thought i'd put it out there and ask y'alls if you have seen a good way to achieve or a reseller that would let you...
a. Use whmcs to auto create accounts (yes, ino, very likely in most cases)
b. Manage all the accounts from a user that has access to all the webroots.
Im looking for a setup that lets me autocreate an account so a user has access but lets me use dreamweaver to manage all the sites in one session. I've found either or, but not together.
I thought about buying an instance of cpanel or lxadmin but im tentative to move away from a guaranteed uptime and backup solution that comes with a reseller environment.
We are looking for a solution to support multible IP's for different domains in one subscription/cusomer Account. Current, we have 4 IP's as shared. the Customer can choose under "Web Hosting Access" , which IP he wants to use.
This setting effect all domains in his Account. So it is not possible to set domain1.tld to e.g. IP 1.1.1.1 and domain2.tld e.g. to 2.2.2.2
We like to offer the cusomers one cusomer account with multible IP's
We have a domain with two domains aliases.
How can we have certificate with each domains ?
How do I add aliases to the Full hostname of the plesk server itself? I want the server to listen to 2 more names. Especially for mail, and for migratory purposes (plesk server x is a new one, the name of the old one y needs to become an alias of x later on, etc.). I'm amazed by how hard to find this is, and there is literally nothing on it that I can find!
Of course, I can add aliases via command line, but I have no intentions of having postfix and webserver config be overwritten every time the control panel is used..
I would like to change the alias host from webmail.domain.com webmail to domain.com/webmail.
View 1 Replies View RelatedWe have a CentOS6.5 with 11.5 PLESK. There is a domain named domain.com and there is an alias domain on it that named alias.com and all check boxes of it (Mail,Web,Application and ...) are selected. When we send an email from GMAIL to info@domain.com, we receive it successfully, but when we send that email to info@alias.com, it doesn't receive.
View 2 Replies View RelatedI have setup a test server at home, Datacenter edition 2008.
Now, is there a way to allow only a certain username and password combination to access an FTP session/site?
How can I change permissions of a lot of files through plesk file manager without selecting one by one?
View 2 Replies View RelatedI am using Windows Server 2008 R2 with Plesk 12.0.18 Update #25 with single IP address assigned to the server.
Is it possible to do the following with only 1 IP address:
-Host 4 shared hosting websites on the same IP but also use the same IP address to install and setup a shared SSL Cert. for hostname AND for 1 of 4 hosted websites ...
I have 2 webspaces on my server, www.a.com and www.b.com
I initially setup www.a.com, everything works fine and I can access the emails for a.com through webmail.a.com
Then I setup www.b.com using almost identical DNS settings, except that each domain has its own dedicated IP
Now, the problem is I am not able access webmail.b.com, the error message is server not found, why is this?
It seems that I can only access the emails for b.com using webmail.a.com
I have mailenable version 8 standard installed...
I'm looking for information about having EXTERNAL ms-sql 2008/2012 servers with MS-SQL Web Edition license connected to one or more Plesk servers.
We don't want to use the Express version coming with Plesk but use MS-SQL 2008 & 2012 (both accessible by clients if possible), on individual dedicated machines for SQL only.Of course we'd like to have all current functionality coming with Plesk Power Panel inc. backup/restore options from within Plesk.
I am having trouble with setting up an email account to set up the email I go to Mail > Create Email Address > and enter email address (info@example.com) and check the "access to control panel" and create a password and also check "mailbox" .
But in the email client, when I go to use SMTP and I enter the following info:
- SMTP Server: example.com
- username: info@example.com
- password: password I created above
- port 25
- user TLS
I get this error: Your other email provider is responding too slowly. Please try again later, or contact the administrator of your other domain for further information.
I just got a vps server with plesk 12 on it. I've added domains and so far so good. But I can't figure out how to install the email accounts.
I've made de email accounts and when adding these accounts to my mail program I wanted to use mail.domain.com or imap.domain.com But it doesn't work? And I need to use the smtp host of the internetprovider?
How can I use imap.domain.com and smtp.domain.com to get and send my emails?
Also Is there any way how to check if my server is installed ok and there are no security issues? Because I'm a noob I don't know what the best settings are?
I registered a domain name and setup a Linux server on GoDaddy, choosing Plesk panel with Power Pack. Inside the panel I created an email address, which I can access from the webmail interface without problems. I decided to setup my clients as well, using the IMAP configuration, as I'm using multiple devices.
I followed the instructions for Outlook express and I was able to setup the account on my virtual machine, with Windows 7 and Windows Live Mail.Though, speaking of the host machine, a MacBook Pro, I normally use Apple Mail that comes with MacOS. Instructions for setting up Mail are updated back to Snow Leopard at least and they do not work properly. I tried various configurations, but I was only able to receive mail on the account, while sending won't work at all.
I'd like Parallels to update the guide or, at least, to open a KB page with the solution(s) to this issue: I googled it and found out that it is a common issue.
We was unable to log in into Round cube with any email account. URL....
View 2 Replies View RelatedI need to setup a global FTP account so I can reach the root of C:inetpubvhosts.
View 2 Replies View RelatedWhen I change an email address on a user's account I get this error?
Code:
Internal error: mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/mydomain.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
Message mailmng-mailname failed: Unable to open dir /var/qmail/mailnames/bullochrec.com/stevebrown/@attachments: No such file or directory System error 2: No such file or directory
File Agent.php
Line 243
Type PleskUtilException
Using Cloudlinux 6.6 and Plesk 12
I want to transfer an account from a windows server to my linux server.
How can I do that?
I have one domain who's not create dns in MS DNS server, i try create manuall but after this the record is missing, but on plesk showing, How to fix this ?
View 2 Replies View RelatedI want to create a new email would then click on the OK button attachment error is displayed.
View 1 Replies View RelatedI have a vps server and i am trying to create ftp account and i am getting this error:
Unable to start (/c ""C:Program Files (x86)ParallelsPleskadminbinserverconf.exe" --list"): (267) The directory name is invalid.
---------------------- Debug Info -------------------------------
0: Exec.php:43
plesk_proc_open(string '"C:Program Files (x86)ParallelsPlesk/admin/binserverconf" --list', array, string 'C:Program Files (x86)ParallelsPlesk/tmpagent78f0fd54abecb83b12f6c9fdde9b5b84', array)
1: Exec.php:43
[Code] ....
I have a problem with one of my user accounts (let's call it testuser) in Plesk. System is Windows Server 2012 R2 with Plesk 12.In the Control Panel, the customer and subscription for testuser are removed, so there should not be any data left for the domain/user.
However, when I want to create a new subscription with the username testuser, Plesk gives the error "User account already exists". I tried to manually remove the domain and took the following steps:
Code:
C:Program Files (x86)ParallelsPleskbin>customer --remove testuser
An error occurred during removal of customer account: testuser does not exist
C:Program Files (x86)ParallelsPleskbin>webuser --remove testuser
The web user with the name 'testuser' does not exist
C:Program Files (x86)ParallelsPleskbin>ftpsubaccount --remove testuser -do
main testdomain.tld
Unable to remove FTP account: Unable to find service node for web service on dom
ain with id=0
C:Program Files (x86)ParallelsPleskbin>database --remove testuser
An error occurred during database removal: database does not exist
As described in this topic, I logged in to the MySQL server and tried to remove the user:
Code:
C:Program Files (x86)ParallelsPleskMySQLbin>mysql -P8306 -uadmin -p[admin-pass] psa
mysql> g SELECT id FROM `sys_users` WHERE login=`testuser`
ERROR 1054 (42S22): Unknown column 'testuser' in 'where clause'
mysql> g DELETE FROM `sys_users` WHERE login=`testuser`
ERROR 1054 (42S22): Unknown column 'testuser' in 'where clause'
Also, the inetpub/vhosts directory for the user is correctly removed and therefore doesn't exist. Are there any other steps I can take to remove the user manually and so be able to recreate the user?
I just upgrated from Plesk 11 to Plesk 12 and now it looks like my admin account is not admin anymore. I can only see the domains that is subscribed to my username.
Is that normal? How can I see all subscriptions now?
I recently upgraded the Plesk to 11.5.30. Now I am not able to create new MySQL databases. I am getting below error.
Code:
Error: Connection to the database server has failed because the supplied account does not possess administrative privileges: Access denied for user 'admin'@'localhost' (using password: YES)
MySQL admin details are correct in plesk database, also the admin has full privileges. I am manually able to create databases, users from mysql prompt. It's just the plesk interface that's giving error.
Code:
C:Program Files (x86)ParallelsPleskMySQLbin>mysql -u admin -p*************** mysql
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 68
Server version: 5.1.68-community MySQL Community Server (GPL)
[Code] .....