Plesk 11.x / Linux :: Multiple Email Certificates For Multiple Domains?
Nov 11, 2014
I have two domains as virtual hosts on same IP address.
I am getting certificate error for the second domain when I try to check email (using MS Outlook). I can't permanently "accept" certificate, it complains again and again. Certuficate I created and self signed for imap.domain1.com, but the second email server is imap.domain2.com, so it complains.
How do I set separate email certificates for two domains? Is it possible at all?
The VPS has 16 domains running on it, all with different web addresses and their own email accounts etc.
It's a Linux server and is running postfix for the mail. The main website on this domain has the mail service disabled because we have an exchange service on our own server here in the building where we work. Now when anyone on any of our domains on the VPS try to email us at 'maincompany.com' they get the following error message:
This is the mail system at host <vps address>.
Your message could not be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can delete your own text from the attached returned message.
The mail system
<stevew@maincompany.com>: mail for maincompany.com loops back to myself...
I currently have one server with multiple domains on it. I run apache with virtual hosts.
I want to setup email forwarding such that:
Email sent to <anyone>@aaaa.com ----forwards to----> <some email address> Email sent to <anyone>@bbbb.com ----forwards to----> <some email address> ... Email sent to <anyone>@xxxxx.com ----forwards to----> <some email address>
Any pointers? Im not even sure what to search for on the net.
I just tried westhost. Very nice folks, good reviews, worth a shot. I signed up for a regular hosting account that allows multiple domains. That didn't work for email. An email user has access to email under that users name for all domains attached to the account. so you can't have info@abc.com, info@def.com, etc. One info@ per account. I did find a hack for it, but it wouldn't work with web mail.
So now I need to find a host that separates mail by domain WITH webmail.
This is getting so tiresome. I have a VPS with "the planet", but so many things just don't work out of the box. I've been fighting with them about PHP not sending mail for months. DNS problems everytime I setup a new domain. There has to be an easier way!
15 domains, everything needs to work. I don't want to manage anything. No resellers. The company I host with will own the data center.
sitea.com was pointing to /home/me/public_html/sitea
siteb.com was pointing to /home/me/public_html/siteb
On my new server, I have root permissions and used Plesk to create two domains sitea.com and siteb.com . Now plesk asks for a user to be created for each domain, so created usera and userb for sitea and siteb respectively.
Now as root on my server I created the dir /home/me/ and untarred the whole backup from old server to new server and I have dirs :
/home/me/public_html/sitea and /home/me/public_html/siteb
In apache configuration in file: httpd.include_sitea under dir /var/www/vhosts/sitea.com/conf/httpd.include
I changed the document root to /home/me/public_html/sitea
So I thought I am all set. But it does not work. When I try sitea.com in the browser it works but for all subdirs, for eg sitea.com/images it says Access denied.
This is because the dirs I created are owned by root.
So the owner of /home/me/public_html/sitea needs to be usera for this to work ?
Again for siteb to work I need to change the owner of /home/me/public_html/siteb to userb ?
This will be painful ? At least I should be able to change the owner of /home/me/public_html/ to one owner and ensure all sites under that work fine. How do I do that ?
I think the problem is clear by now. Its that I want all my sites to work off from .../public_html/ sub dirs.
Is there an issuer that issues wildcard SSL certificate which can be used on multiple servers under the same domain name (like server1.domain, server2.domain, server3.domain...etc)?
I am running qmail with stunnel to achieve SMTPSD and POP3DS. I am running it on 1 SSL cert on stunnel. How do I install more than 1 cert on stunnel as some of the clients on the server want their own cert for SMTP and POP over SSL?
I have a list of bad Ips and would like to add it into iptables, but I don't went to enter one-by-one or by command line, I would like to insert into list file of iptables editing a file or something like that, where and how I can procedure to do this?
I run a small web development company and we purchase hosting on behalf of our customers through 1and1.
We recently started renting a VPS through them that claims it can handle up to 100 individual domains, but we have been having problems. Most of the sites are 7-8 pages of content, a few all flash, and some with flash headers.
We have approx 20 domains currently running on this VPS but the sites are down a lot or take forever to load (5 minutes).
I tryed install multiple-php version in my Plesk 12 on CentOS 6.5 using Plesk KB but it doesn't work very well so I installed php-panda and it works fine but I want uninstall the php 5.4.31 version that fail but leaving the no-atomic old version. How can I do that? I know that is installed in other directory.
I have plesk running on virtual machine on SSD drive but some web pages required large storage therefore I added second spinning hdd and mounted it into the file system.
How this could be used within plesk? I was trying symlink but that was not supported by FTP and apache.
I have noticed that the CPU on my VPS maxes out. This occurs when there are many concurrent visitors to any of the 7 domains. 6 of the domains run Wordpress and 1 runs php-bb forum. When I run top during high cpu I see multiple "php-cgi":
I installed Nginx and PHP-FPM through the Plesk Autoinstaller.It works well with the default PHP version installed originally with the CentOS 6 system (5.3.3). I also installed manually following your KB [URL] .... additional versions of PHP. It works well, and I can use those additional versions through the Plesk UI.
Therefore, I was wondering how to use them with PHP-FPM? As when I activate a domain for Nginx with PHP process (PHP-FPM), it switches the PHP version to 5.3.3 and I can't change this parameter.
i recently purchased my first vps from netdepot and want to transfer my 2 web forums from shared hosting. So what is the best and easy way to do this. I got the control panel Lxadmin and also webmin. I Switch Programed to apache and bind because i know little bit about them.
I am setting up a server with multiple domains on windows 2008. I am using mail server and I am looking at putting webmail on it. I would like to have people access www.domain.com/mail and get to the webmail interface. Would I use virtual directories for this?
i m manging 3-4 Website on a same hosting service.logging in n out is very hectic,i use FTP.its very cool but wht if i wanna add all domain under one domain n manage em from there is that possible?
i just had a simple question about wether there is any difference between getting a VPS plan (like that from jumpline) and a shared plan (like that from hostgator) for the purposes of hosting multiple domains.
It seems that for vps I have to create a "subdirectory" to create a new account for domain name. Plus the emails are all the same (so for example if I create joe@domain1.com and I have domain2.com registerd, joe@domain2.com will also work with the same username password).
On the shared side of things - I also do not get a very high level of isolation. Not like with reseller WHM package anyways. BUT the resellers lack the basic ssh access (at least the most favourables I looked at).
So i was wandering if anyone out there who is doing small-time part work and sells personal/business websites to clients knows which way is it better to go.
To get a VPS account and keep on creating subdirectories for each separate client (and hope they don't use the "other" domain names in the emails) OR get the shared account that allows unlimited domans OR something else.
I also forgot to mention that my budget does not extend beyond $20/month.
I am looking for a replacement to my existing ISPConfig 3.x installation and have heard a lot of good things about Plesk, so I decided to put up a test server with a trial version of Plesk 12.The server is running Centos 6.5 64-bit minimal install with all system updates applied before installing Plesk. After installing Plesk I used the commands from the attached text-file.After compiling PHP 5.5.20 with no errors displayed on screen I created a new subscription plan as a copy of the #default domain" plan and changed the name to "PHP 5.5 website" and in the Hosting Parameters I changed PHP to run still run as a FastCGI application but use my compiled PHP 5.5.20 instead of the OS vendors PHP 5.3.3.The configure options used are the same as I did use for my ISPConfig 3.x servers.I also tried the configure options shown here: [URL]... But the command ends with a "configure: WARNING: unrecopgnized options: --enable-fastcgi"
If I compile with the attached script I get a HTTP 500 error when visiting the selected website (which is a clean installation of Drupal 7.34) and in the error_log for my test site I get this: " [Sun Dec 28 18:51:48 2014] [warn] [client x.x.x.x] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Dec 28 18:51:48 2014] [error] [client x.x.x.x] Premature end of script headers: index.php " x.x.x.x is the internal IP of my router/firewall.I have also looked in the Plesk Administrator GuideIs there a known issue with Plesk 12 and CentOS 6.5 64-bit when wanting to use multiple versions of PHP, since both the version compiled using the KB article above and my own attached script worked fine on my ISPConfig 3.x servers.
