After migrating to a new server and also from plesk 11 to 12 i've got two watchdog errors:
/bin/sh: /usr/local/psa/libexec/modules/watchdog/cp/clean-events: No such file or directory
/bin/sh: /usr/local/psa/libexec/modules/watchdog/cp/pack-sysstats: No such file or directory
Both files dont exist. Is it save to delete the scheduled taks or should those tasks exist?
When my server reboots I get about 12 email notifications from Watchdog that services are being started.I don''t get the same thing from my other Plesk servers upon reboot. How can I stop it?
View 4 Replies View RelatedI want to Reinstall Watchdog(RKHunter), but i don`t find Watchdog in Extensions.
Is it no longer available ?
I just installed Nginx. It seems it works well, but watchdog reports it as "stopped".I restarted watchdog several times, and it always says the service has stopped.What shall I do to make watchdog see Nginx as a working service?
Following this KB [URL] ...., I can confirm that command "/usr/local/psa/admin/sbin/nginxmng -s" return "Enabled".
SETUP:
CentOS 6.3, 64 bit.
Plesk 11.09, Update #10.
I enabled Watchdog in Plesk.
It works fine.
However, it doesn't start up by itself after a server reboot.
I can start it manually with the following command:
/usr/local/psa/admin/bin/modules/watchdog/wd --start (which I have done by adding it to /etc/rc.local)
Shouldn't Plesk do this automatically?
I am reading the plesk documentation about "Tags Used in Notification Messages". URL....It says that one can use a <password> tag which will show the user's password ("user's password for authorization in Plesk").How can Plesk show a password? I would assume all passwords are saved as hashes and not as plain text?
View 10 Replies View RelatedSince upgrading to Plesk 12 I am experiencing a strange bug:
When enabling the limitation of outgoing email messages, is not possible to RECEIVE emails to a account that is only redirecting the email messages (to a different account which also lies on the server).
I reproduced this behavior on two different servers from which one is a complete reinstall.
The maillog will then show the following error when receiving mails to a redirecting address:
Aug 1 04:04:34 xxxxxx plesk sendmail[16709]: handlers_stderr: DATA REPLY:554:5.7.0 The message could not be sent. You are not allowed to use sendmail utility.#012REJECT
Aug 1 04:04:34 xxxxxx plesk sendmail[16709]: REJECT during call 'limit-out' handler
I can find very few information on this error message, but when disabling the limiting feature, everything works as expected.
This is our first installation of Plesk Panel.
In our root directory have the Logs folder, but do not know how to find the log file to access the error messages that may be generated one.
I have a server(godaddy) with plesk. It was all working well till 8 - 10 days ago. I didnt notice it one week later where I started receiving a lot of failed mail notices. Then on investigation, there were more then 50K spam mails in the mail queue and the mails that were supposed to be sent(registration, forgot password) were also held up in the queue. I found the source of the spam and fixed that.
Also I cleared the mail-queue. Now when I try to send out a test message, it still gets held up in the mail queue. But I can send a test mail to the same domain (info@mydomain.com). All new user registration mails are also held up and this is greatly affecting the site.
after the update i've got many errors in plesk panel, for example:
- change webhosting settings (like password, etc)
Internal error.
ERROR: Call to a member function getWebServerFPAdminSysUser() on a non-object (Apache.php:738)
- click on server components in server manager:
ERROR: Call to a member function getWebServerPackage() on a non-object (class.ServiceControl.php:76)
I'm migrating 11 domains from my old server to my new server, and it's been running now for 3 hours and the progress section shows 100% but it looks like it's still running.
And each time I check the "Domains" section I see a couple of my domains listed but not all of them yet, and the ones I do see the "Disk Usage" on one of my domains that I know is large shows the same figure each time I go to this page; it doesn't seem like it has increased at all.
How can I tell if the migration is still processing or if it has froze and I should restart the migration again?
Since upgrading to 12.0.18 i have picked up a strange problem when creating a new email account.The Mail tab is not displayed and does not allow me to create email accounts, in version 11.5 I also appeared tab. I have reviewed the FAQ and the solution to change tables in the DB does not serve 11.5 (I understand that by varying the field names and values in 12.0.18).
View 11 Replies View RelatedPlesk 12 is used, latest #MU on CentOS 6.5 final.
Maillog is full of messages like:
Mar 31 14:56:52 hosting plesk sendmail[1177]: _mh_fork(): Error occured during waiting the child process with pid: 1178: No child processes
Mar 31 14:56:52 hosting plesk sendmail[1177]: Error during 'check-quota' handler
Mar 31 14:56:52 hosting plesk sendmail[1177]: Unable to get sender domain by sender mailname
[Code]....
I'm running Plesk 12 (installed last week) on a Centos 7 box. I'm running in ISP View, and in the Interface Controls Visibility section I've checked the box for "Hide controls for rejection messages for non-existent mail addresses".
However, when I log in as a subscriber, I can still see those controls.
Every time my server tries to send mail to Gmails/yahoos - they reject it with the following message:
Code:
Apr 13 11:35:49 m1370 plesk sendmail[5009]: handlers_stderr: PASS
Apr 13 11:35:49 m1370 plesk sendmail[5009]: PASS during call 'limit-out' handler
Apr 13 11:35:49 m1370 plesk sendmail[5009]: handlers_stderr: SKIP
Apr 13 11:35:49 m1370 plesk sendmail[5009]: SKIP during call 'check-quota' handl er
Apr 13 11:35:49 m1370 postfix/pickup[1759]: C90FA61668: uid=48 from=<apache>
[Code] ....
I tried Qmail, same issue
Code:
Hi. This is the qmail-send program at m1370.contabo.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. It didn't work out.
<emailhere@gmail.com>:
2a00:1450:4013:0c00:0000:0000:0000:001b failed after I sent the message.
[Code] .....
Centos 6.6 + Plesk 12 Web Pro Edition
My server certainly did not spam Gmail servers, (my old server works fine sending email t gmail) I fear this has something to do with my "Postfix" configuration.
install such extension as Watchdog (available on PPP) on PPA Service nodes (or maybe as a Watchdog Server on Management node)?
View 2 Replies View RelatedWe successfully migrated web and email from a Plesk 9.3 system to the new Plesk 12.0 system. Afterwards i try to install new extensions and / or try to delete existing extensions and receive the following error:
Die Erweiterung Webserver Configurations Troubleshooter kann nicht entfernt werden: crontabmng failed: /usr/bin/crontab execution failed: "crontabViWP46":11: bad command errors in crontab file, can't install. System error: crontab execution error
Means that i am not able to delete the extension "Webserver Configurations Troubleshooter". But the extension is delete (but not completelly - only a checkbox is shown without entry).
Is something comes with a config of the old server? All works proper until migration.
We have a problem migrating from 11.0.9 to a different server running 12.0.18. Our Plesk 11 server is running great since years ago. We have 3 resellers there, say reseller1 with 17 domains, reseller2 with 13 domains and reseller3 with 250 domains.
First, we executed a complete server migration with:
/usr/local/psa/bin/migrate -m -host xxx.xxx.xxx.xxx -password xxxxxx -ip-mapping /root/migration-mapping.txt -skip-license -replace-existing-objects true
The process ran properly, but in the end we've found reseller1 and reseller2 were NOT migrated. No errors were reported tho.
While investigating this issue we have found:
1) "/usr/local/psa/bin/migrate --list-resellers" returns only reseller3. So it looks like reseller1 and reseller2 are not "seen" by the migrate utility.
2) /usr/local/psa/bin/migrate -mr reseller1 returns:
Migration started at: 2015-06-03 04:21:11
The following clients not exist: reseller1
3) /usr/local/psa/bin/migrate --list-subscriptions returns the 250 subscriptions of reseller3, but no single mention to reseller1 and reseller2 subscriptions.
In short, reseller1 and reseller2 are invisible for the migration utility. Both missing resellers are ok, enabled and active in our Plesk 11 server.
We are now stuck on the migration process and wondering if this could be a bug in the migrate utility? or some inconsistence in our Plesk 11?
If you transfered an account with the PMM, is e-mail still received on the old server being forwarded to the new one?
Is it a good idea to transfer only e-mail & accounts again after DNS propagates to the new server?
I had a old virtual Server with Ubuntu+Plesk12. I build a new dedicated Server with CentOS6+Plesk12 and migrate all Domains. Now i have a strange problem:
When i upload a file with FTP-User "user1", the file has the permissions Group=psacln & Owner=user1. All is fine, i can see and edit this file in a FTP-Program. But when my website create a file (cache html files or installed plugin folders in wordpress), I can't see, can't edit and can't download this files.
When i login to plesk with the admin account, i can see and edit this files. They have also Group=psacln & Owner=user1 and i can give them 0666 rights but when i login with FTP-User "user1" with my FTP-Program, I didn't see that files?!
Just went through a migration and everything appeared to go pretty smooth, but we figured out there was an issue with symbolic links.
A site on an old server running plesk 12 had symbolic links in it. When the site is Migrated through the plesk migration tool, the symbolic links aren't preserved on the new server.
I have recently migrated to new server with Plesk 12. There was a webalizer even I used to have awstat. So I installed awstat and changed it in the settings. But every day when I synchronized the abonnement it changed alone back to Webalizer ... which I dont want
When I tried to deactivate or deinstall Webalizer in plesk using the update manager, I got an error:
"Some errors occured during installation."
Solved, changed settings in Customer Service Plan and synchronized...
apparently Envelope-From, Sender and Errors-To headers are set to a wrong address for messages from mailman to the list-owner. This is particularly true for mails like 'message requires approval'.
It seems like the plesk<->mailman magic results in all list-domains being written to the end of /var/lib/mailman/Mailman/mm_cfg.py in the following format: add_virtualhost('list.DOMAIN').This in return results in mail headers Envelope-From, Sender and Errors-To of mailman system mails like described above being set to mailman-bounces@DOMAIN, where DOMAIN is the one from the last add_virtualhost entry.
In my opinion, this obviously is a bug. Maintainance mails from mailinglists have wrong headers set, often with a domain that belongs to a completely different customer than the mailinglist.
I found the following discussion on mailman-users mailinglist from 2008 which discusses the same issue - also a plesk setup: URL....
Plesk from plesk server Migration, I want to do
I get the following error.
Error: No Migration & Transfer Agent found. Data migration cannot be performed.
I am setting up a new server and started to migrate domains from an 11.x plesk server to this new server with plesk 12.x on it. Everything works fine, domains, users, mailboxes, everything is migrated - except the horde settings inside the webmail. I recognized this after my first login into webmail, normally the inbox is shown (I configured my webmaoil this way) but after the migration this setting is lost - including all other settings. How to migrate this settings?
View 1 Replies View RelatedWe have installed Plesk 12 on a fresh up to date Ubuntu 14.04 x64 server.
After installation, and before any migration, we have moved some folders:
- /var/www/vhosts -> /opt/vhosts
- /var/qmail -> /opt/qmail
- /var/mysql -> /opt/mysql
We have created symlinks, modified some configuration files (Plesk included) and ran domains reconfiguration script (zero domain installed, but just in case the script will do anything else).
After that, we have launched Plesk Migration Wizard (from Plesk 9 to last release).
Everything has worked fine: all domains have been migrated on our new folders (/opt based) and owners has been correctly defined for each domain. The same for MySQL and all mail accounts.
We have checked Apache VirtualHost configured by Plesk Migration Wizard : our new folders are used (/opt).
So all seems to be ok.
But now, all websites (configured with Apache and Apache PHP module) returns 403 Forbidden error.
We have try changing to FastCGI with Apache same error.
We have try changing to full Nginx (PHP and static files), some websites run.
We have checked some KB (112884, 800) but all seems to be good.
Is there any steps we have omitted when we move folders ?
I've got a problem to migrate A user from one server to another.
I tried to use the migration manager, but if I start the migration manager the migration will be started but after 2 seconds it has finished and no migration has be doen.
or should I moove the data manually?
I'm trying to migrate a Plesk 9.5 to a Plesk 12 via the tools.
I tested some domains before doing he whole but I have a "big" domain who make an error:
ERROR: Call to a member function updateUser() on a non-object (Abstract.php:930)
I already checked on google, tested the solution but each time I do the migration, it crash again...
I have recently migrated my websites from Plesk 11.0.9 to a new server with Plesk 12.x and the webalizer is not working.
- Is there a chance to repair it and not loose the data? If yes, how do I do that?
- Or do I have to remove it and install Webalizer again? How do I do that?
OS Ubuntu
Uninstalling Webalizer with plesk updater is not possible.
After executing this:
Code:
# /usr/local/psa/admin/bin/statistics --calculate-all
I get:
Code:
WARNING during statistics_collector execution: : Executing logs preparation...
error: error creating output file /var/www/vhosts/system/domain.tld/logs/error_log.1: File exists
statistics[6845]: Unable to execute logrotate via: /opt/psa/logrotate/sbin/logrotate /opt/psa/etc/logrotate.conf -s /opt/psa/var/logrotate.status
get this problem on a completely new installed machine Ubuntu 14.04. I want to migrate and i come only to that point after Checks -
Home>Tools & Settings>Migration & Transfer Manager>
Define IP Addresses Mapping:
Next button is unavailable and i get the message "No free IP addresses of this type available".I tried to upload a new txt file with old and new IP address, but i doesn't get a feedback. So what I can do now?
