OS: CentOS 6.5 (Final)
Panel version: 11.0.9
I can receive email and check them via Horde but i'm unable to get them forwarded to my gmail account.Is there anything i can check/do ?I'm an ex-cpanel user.
So since some time the email forwarding is not working anymore. I am currently working on the version 11.5.30.
The main problem I have, is that the hosting provider who is responsible for the server hasn't fixed this since may!
My intermediate solution would be to add a webmail account so the person the mail is being forwarded to can use it.
I have a domain with a few forwarding email accounts that forward to mac.com email accounts... for some reason every once in a while these accounts stop working...
This is the error I get when I email to that account:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed: ...
Many of our clients create e-mail accounts that forward incoming e-mail to mailboxes hosted on other e-mail services. e.g., Gmail.
Lately, though, a handful of these accounts have been receiving a lot of spam (i.e., UCE) and that's been causing a lot of damage to our reputation with these other e-mail services because the message that's being forwarded appears to have originated from our servers.
Code:
<someuser@gmail.com>: host gmail-smtp-in.l.google.com[64.233.183.27]
said: 552-5.7.0 This message was blocked because its content presents a
potential 552-5.7.0 security issue. Please visit 552-5.7.0
http://support.google.com/mail/bin/answer.py?answer=6590 to review our 552
5.7.0 message content and attachment content guidelines.
g20si28780491ici.46 - gsmtp (in reply to end of DATA command)
Is there some way to...
Find accounts that are configured to forward to gmail?
Disable forwarding in accounts that are configured to forward to gmail?
I have two sites that register a high amount to SMTP traffic. Both sited have only forwarding email addresses.
Do forwarding addresses accumulate SMTP traffic on the log?
Also, if a forwarding email is created without a mailbox is it necessary to add a password so that "others" cannot use the blank SMTP server to send email out?
I've just installed a Plesk 12 vServer and created a customer with a email adress. I took the informations shown in the Power-User-Panel under "emails" with the correct ports. After clicking on "finish" it shows that Thunderbird has a problem with a certificate from Plesk.
I don't want that this error message will be shown for customers.My primary domain of the vServer has a SSL-certificate. Could I use this primary-domain to avoid the error message (the server-adress would be different)? If I use the primary domain inside the server-adress Thunderbird will say "there is no email account on this server".
I am currently running a trail of plex to see if it meets our requirements.
My domains are currently being hosted by an external provider and I have made the dns entry to point it the the server running plesk.
Now we can access the site created through plesk but the emails are not working not the webmail or even trying to forward the mails.
We were using the mailserver on our linux install, but have since changed over to an ms exchange server. With that I removed the mailserver and installed MSMTP relay only mailserver (SMTP client) option.
I configured the External SMTP Server settings under Tools & Settings / Mail with a valid email address password host name and port of 587. When I save it says settings saved.
Since doing this I have been unable to use the email link option for share files in the file share portion of my domain. When I try to select a user from the list to send the email to or even type an external email all I get is the error "Unable to send email".
When I checked the maillog file in /usr/local/psa/var/log, I get this error "Jun 20 15:42:59 u16271698 msmtp: host=smtp.1and1.com tls=off auth=on user=to@email.ca from=psaadm recipients=to@email.ca errormsg='cannot use a secure authentication method' exitcode=EX_UNAVAILABLE"
Where I have proper emails configured where I placed "to@email.ca"
How can I get this working with the MSMTP relay only mailserver (SMTP client) option installed?
I had email forwarding from a site that I am running on a DirectAdmin host and its not working now.
View 1 Replies View RelatedI have re-built a website on a new domain. Now I want to redirect http://www.olddomain.com/anything or http://olddomain.anything to www.newdomain. Because the file structure is totally different, I want all redirections to go to the Home Page of newdomain.
Initially, I used Standard forwarding in the Plesk CP but that attempts to keep the filename the same. So www.olddomain.com/wibble tries to go to www.newdomain.com/wibble. But wibble dies not exist on the new domain.
Should I use htaccess with physical hosting instead on olddomain.com? Is the following correct?:
Code:
Options +FollowSymLinks
RewriteEngine on
RewriteCond %{HTTP_HOST} ^olddomain.com [NC]
RewriteRule ^(.*)$ http://www.newdomain.com [R=301,L]
Will that basically cover any request? Anything that people have saved or which appears in Google searches, no matter whether http:// or http://www.
And for neatness on the new domain, I would like to add www to any request like http://newdomain.com/whatever to go to http://www.newdomain.com/whatever which I think means that Google analytics will report more accurately.
So would my htaccess file on newdomain.com be like this?:
Code:
Options +FollowSymLinks
RewriteEngine on
RewriteCond %{HTTP_HOST} ^newdomain.com [NC]
RewriteRule ^(.*)$ http://www.newdomain.com/$1 [R=301,L]
I setup an email account into my Plesk 12 to automatic forwarding all emails to an gmail address. But Gmail put all mails received into the Spam folder.
I revised the mail Header and its a SPF softfail causes because my server is not rewritting the sender envelope.
How can I activate SRS on my Plesk
I update my plesk 11,5 to 12.And I activate (limit control for smtp)After this action the email forwarding fails in all domains of plesk.This is the mail system at host fsyc.org. You can delete your own text from the attached returned message.
Reporting-MTA: dns; fsyc.org
X-Postfix-Queue-ID: 5B51E2E800BC
X-Postfix-Sender: rfc822; rbuila@robertobuil.com
Arrival-Date: Tue, 16 Sep 2014 14:21:10 +0200 (CEST)
[code].....
I want to add a subdomain foo.bar.com to a master domain bar.com in the subscription bar.com. Normally this works but if I set the hosting type of the master domain to forward, I cannot add subdomains anymore. If I have already added a subdomain, I cannot change the hosting type of the master domain. Also it is not possible to add a second domain to the subscription anymore.
View 6 Replies View RelatedI have installed Plesk 12.0.18 on my server and want to change the hosting-type from "Forwarding" to "Web hosting". I change the type via "Websites & Domains" view (see attachments).
After I insert username and password, I get following error message:
Some fields are empty or contain an improper value. ('home' = '')
Deleting the domain and creating it from scratch is a bad option. I would have to create all e-mail accounts and migrate the data.
URL....We are running Plesk 12 on a Linux VPS where we have multiple domains running.Multiple of these domains should redirect from www. domain name. ext to https://ext.domainname.com.This is configured with the Domain forwarding in Plesk, with hosting type Forwarding.But as described in the 2 links provided above, whenever you go to https://www.domain.ext, it does not redirect, and actually shows a Security error, since the domain doesn't have the SSL-certificate installed (because it should redirect to the https://ext.domainname.com).
Clearly we don't want visitors on the website to receive the (incorrect) Security error, and we want all traffic to http(s)://www.domain.ext to be redirected to the appropriate subdomains. allows us to redirect both the https/http connections to the domains, without forcing us to have the domains have a Website hosting add redirect them manually with (for example) .htaccess.
I have mail-addresses with mailbox turned OFF and Forwarding switched ON.
The user can receive emails but can't use SMTP to send email. I expect that users without mailboxes can send messages, like in Plesk 9.5.
Error: No such user 'info@example.com' in mail authorization database
CentOS 6.4 + Plesk 11.0.9 Update #45
I'm not sure if this is the right place to post this, If I've selected the wrong forum, admins please move.
I'm looking to set up a server side "mailing list", with a few specifics. The idea is that someone could send a mail message to production@domain.com and it would then forward that message to all members included in that department (no more than 12 each). The old administrator here had us hosted on 1and1, who allowed 3 forwarders per email address, and he had managed to rig a system out of that, but I've just moved to Downtownhost (yay!) and they appear to only allow 1 forwarder. Is there a simple way to do this without having to make all users maintain their own mail distribution lists?
im trying to use my cpanel to set up an email forward and i just cant seem to get it to work.
Im forwarding from info@kiesuwkorting.nl to myemail@gmail.com
however when trying to email to info@kiesuwkorting.nl with that same email adress i don't get my send mail in my inbox.
Could it have anything to do with.
- some spam filter (not in my spam box though)
- my domain kiesuwkorting.nl being an addon domain to another account of mine.
I'm having difficulty sending an email to another email address (with a different domain) which is on the same VPS.The trouble is, on the other domain's VPS control panel, within the DNS settings, the MX records have been pointed externally (to an exchange server). Their email is turned off. But bizarrely, their mailbox is full.
It seems as though Plesk is ignoring the MX records, and sending MY email internally to the OTHER domain's mailbox on the same VPS.How do I get Plesk to send my mail to the correct EXTERNAL MX records?
After installing a separate SSL to domain.com and www.domain.com, for some reason host.domain.com, which is the subdomain for plesk login, isn't being secured by FTP when choosing "Secure Plesk" after choosing the correct SSL. No error occurs, nor does the dashboard respond to it. It stays the same and unsecured. I tried rebooting server, restart services, etc.
View 1 Replies View RelatedOS: CentOS 6.6
Plesk: 11.5.30 #48
ProFTPd: 1.3.4c
I am unable to connect over TLS/SSL using my FTP client. I have ports 989 & 990 enabled in my server's firewall. My FTP client is attempting connection on port 990, but times out waiting for the server to respond. I also tried adding "TLSProtocol TLSv1" or "TLSProtocol SSLv3" to /etc/proftpd.conf, but get the same result, except that a non-TLS/SSL connection attempt then returns "server closed the connection".
Recently I configured parallels 12.x on Linode Cloud with cent OS. Using DNS Settings I added 'A' record (abc.example.com) as abc and point to IP. But the record is not propagated after 24-48hrs.
View 2 Replies View RelatedI need to setup forwarding of a copy of all outbound smtp emails from clients domain (setup on CentOS/cPanel) to their backup gmail / pop account...
View 0 Replies View RelatedI have a contact form using .php to forward the contents of the form to my email-ad, but turns out, that something i cant do with my free hosting plan.
i was wondering if anyone knew any services (free) that allow mail forwarding where i can host my .php script together with all associated files and simply link to them from my site?
that would be great! thanks!
(not sure where exactly this post belongs, but it's got something to do with my hosting so im posting it here. if any mods think it should be somewhere else, just move it to where you feel it is appropriate )