Getting error while running backup on server. Plesk 12 windows 2012.
WARNING: (server object 'server') Cannot dump sso certificate[Could not find file 'C:Program Files (x86)ParallelsPleskadminconfsso.sp.pem'.]
WARNING: (server object 'server') Cannot dump idp certificate[Could not find file 'C:Program Files (x86)ParallelsPleskadminconfsso.idp.pem'.]
I'm having a problem with Plesk Panel 11.0.9 update #64. All other page running perfect. But when I go to "Backup Manager --> Database Backup Repository --> Upload Backup File" then Plesk Panel show error: Internal Server Error 500.0.
On server, it show detail below: .....
I have recently upgraded Plesk Panel from 11.0.5 windows to 12.0.18 MU#46 windows.
As checked that local plesk backup via GUI throwing error and is not working. On checking the event viewer I found below event during backup run.
Log Name: Plesk
Source: scheduled_backup.exe
Date: 5/23/2015 6:52:06 AM
Event ID: 1
Task Category: None
Level: Warning
[Code] ....
I am now fgetting an error while clicking the Backup Manager option in Plesk panel 11.5 in Windows 2008 R2. see the error below:-
===========
Error: 'ascii' codec can't encode character u'xc2' in position 392: ordinal not in range(128)
===========
When I click to Backup Manager it gives an error "Error: 'ascii' codec can't decode byte 0xc4 in position 7: ordinal not in range(128)" , now i can't reach backup properties
View 1 Replies View RelatedI'm having this issue when trying to set automatic backups to a separate server:
Cannot export dump file 'Friday_02_05_14_info_1405020913.xml' to 'ftp://Scott@00.000.000.00/Backup/'
[Transport error: unable to send directory to repository: Transport error: unable to put local file D:PleskPrivateTemp/repo_transport_tmp_01cf65e52b9bf130friday_02_05_14_1405020913.zip to friday_02_05_14_1405020913.zip: Curl error: Timeout was reached]Click to expand...
When I try to migrate from plesk 11.5 to Plesk 12.0 appears this error "Backup has wrong signature. Restoration prohibited" and migration is not performed . The Plesk 12.0 is a new installation in a new Windows 2012 R2 server.
View 3 Replies View Related12.0.18 update #39
Server 2012r2
Logged into my panel today to run a database backup on a site I'm working on to be confronted with the following:
Unable to backup database 'XXXXXXXXXX'
Cannot open backup device 'C:Program Files (x86)ParallelsPleskBackupXXXXXXXXX.co.nzdatabasesXXXXXXXXX-29 est'. Operating system error 5(Access is denied.).
BACKUP DATABASE is terminating abnormally.
(Error code 21)
I'm not sure why permissions would change on their own, I'm also not sure how to fix the permissions error. I get the same error on all databases.
PrivateTemp folder appears to have write permissions for Group MSSQLSERVER
I was trying to get Active Sync running on my Windows Server 2008 R2 to be able to sync calenders, adress-books etc. with my mobile without success. With a Linux Server ot seems to be "easy" changeable like posted here: [URL]...
Need getting Active Sync running on my Windows machine? According to the steps in the mentioned post, I failed very early
1. check
2. I changed the following files: =>
"C:inetpubvhostswebmailhordeconfigconf.php"
"C:ParallelsPleskWebmailhordehordeconfigconf.php"
"C:ParallelsPleskWebmailhordehordeconfigconf.php.plesk"
with the values: =>
$conf['auth']['admins'] = array(my mail account);
$conf['activesync']['enabled'] = true;
$conf['activesync']['version'] = '14.1';
3. Rewrite:
here the "problems" start, as of course I don't have the nginx option the question is, where to place the rewrite-rules best?
4. check
5. don't know what to do here, if it even is a problem with the max connections to the imap server?
6. I can restart the mailenable service ?
7. as I have admin rights in horde now, I could do step 7!
That's it? I can't use the active sync features ...
I recently started getting errors when attempting to backup our web server.
Code:
Warning: mysql "db_xxx_0"
Failed to pack files webxx-fullbackup_db_xxx_0_1_1406050308 in /mnt/backup/location [ 412107659264 bytes free of 541129271296 bytes total on mount point 0]
Warning: mysql "db_xxx_0"
Use of chdir('') or chdir(undef) as chdir() is deprecated at /opt/psa/PMM/agents/shared/Storage/Bundle.pm line 38.
mysqldump: Error 2013: Lost connection to MySQL server during query when dumping table `wp_postmeta` at row: 1357
I guess the Plesk 12 is the best version of plesk for windows since i work with plesk on version 8.
But the backup task still has a problem, now i can't backup my server using backup manager. If i create a manual task to create backup after few hours the server and plesk just get to slow to use. Only when i remove task i can use back server.
When Parallels create a backup task who's really work ?
How can i backup all my accounts of server in case of crash?
my plesk server was running OK for the last 13 months and suddenly it breaks apart on its own and I cant make it work again. [URL]
Is there a way to backup database at this stage? How?
Planning to reformat my windows server. and start over.
When i try to restore a domain from Server Repository I am getting this strange error
Internal server error:
ERROR: Call to a member function write() on a non-object (Apache.php:821)
How could I fix it?
My site is showing 500 internal server error. I use classic ASP. How to enable custom error on the server? I use Plesk 11. With Plesk 9.5, it will automatically show up on the server.
View 5 Replies View RelatedI'm using Plesk 12.0.18 version with Windows 2012. I need to backup files to remote ftp server. Remote server configuration is Windows 2012 with IIS server. It works with ftp clients very well.
But, i have a problem about Personel FTP Repository. I open Personal FTP Repository Settings and write all boxes with true information about remote ftp server but it says "Transport error: unable to list directory: Curl error: Login denied".
Ftp server works fine with ftp clients and cpanel backups.
When making backup, I get this error:
Warning: server "server"
Unable to backup server Site Builder content[Error in execute ''"C:Program Files (x86)ParallelsPlesksbutilsbru.php" --backup --log=stdout --target=server_settings --file="C:Program Files (x86)ParallelsPleskPrivateTemp mp34720.tmp"':
# Error: Cannot execute query to database. #
After a server migration, some critical Plesk settings were not copied across, even though the option to backup/restore panel configuration was used. e.g.
skeleton (vhosts.skel folder)
php.ini (Program Files (x86)ParallelsPleskAdditionalPleskPHP5* folder)
Default site (vhostsdefault folder)
health config (Program Files (x86)ParallelsPleskadminconfcustom-health-config.xml)
Additional Administrator accounts
Is there a way to get these things to backup and restore that I am doing wrong?
Are there other important settings/data that I have missed from that list? I am still paying to keep the old server in case I discover something else!
Using Plesk Backup & Restore for disaster recovery will lose these settings unless they take extra steps. e.g. I now have a simple batch file that copies these files to a private folder on one of the domains before the daily backup kicks in.
I just configured the plesk server to only allow ftps connections.
When I try to access with a ftp account on the server itself it works well, however when I try to access it from a client PC it get these errors :
(...)
Response: 200 Type set to I.
Command: PASV
Response: 227 Entering Passive Mode (XXX,XXX,XX,XX,XXX,XX).
Command: LIST
Response: 150 Opening BINARY mode data connection.
Error: The data connection could not be established: ECONNREFUSED - Connection refused by server
On the client PC I configured Filezilla in Passive mode with "Require explicit FTP over TLS".
Normally for the firewall only the port 21 is needed or am I wrong (with explicit FTP and passif configured)?
OS: Windows Server 2012 Standard (x64)
Plesk: v11
SmarterMail: v10, v9
Plesk does not read any IP addresses from the server. I can't get past the first webspace setup page that requires a Website IP as the only thing in the list is "None".
The PR Reconfigurator tool doesn't list any IPs in the top section, yet it does list all the server IPs in the bottom right section.
I've tried re-installing Plesking, Repairing, Re-reading IP addresses, all result in the error message below about mailmng.
Neither the latest SmarterMail v10 or v9 are working.
I'm not sure if the issue is with SmarterMail not being able to populate the IP address, or if the issue is with Plesk v11 not being able to read Server 2012's IP addresses.
C:Program Files (x86)ParallelsPleskbin>ipmanage.exe --reread
mailmng failed: command --assign-ports-to-ip not supported.Click to expand...
On the server running Windows migration manager. Firewall is turned off.
On the Linux server Panel Set address and port manager migration. Username and password of an administrator account Windows.
After you click Next, we get this error:
launchpad error (Error code = 2):
== STDERR ====================
Unable to start SSH session: Timeout waiting for banner
==============================
On Windows server - Plesk 11.5
On Linux server - Debian 7 - Plesk 11
First of all I checked via command line if any software is not installed properly while plesk installation was done on destination server (windows server 2012 R2). All looks fine, please check attached file pleskinstallation.txt
Source plesk version 10.4.4 (windows server 2008)
Destination plesk version 12.0.18 MU#23 built.
We are in testing mode of migrating websites hosted with source plesk version 10.4.4 onto destination server plesk server 12.0.18 having (windows server 2012 R2).
What we did, we restored the backup of Source plesk version 10.4.4 (windows server 2008) to Destination plesk version 12.0.18 MU#23 built.
Now the problem is that backup which we restored on Destination plesk version 12.0.18 MU#23 was of 68 GB and now when we setup the backup on Destination plesk version 12.0.18 MU#23 and when backup completes successfully it show us wrong backup size up to 16 GB.
We have requested several times to plesk support has to check the entire new plesk version in terms of all feature (like taking backup, restoring, plesk installation etc) while releasing new version, If they have noticed bug than plesk support should not release new version or micro update until they are sure.
I would request them again to check backup size bug along with other bugs.
1. "Stats crashing and not updating stats"
2. installing "Spam assassin" on Plesk 12.0.18 on windows server 2012 r2 and we are getting error:
Error: Unable to set Plesk SpamAssassin 3.3.2 as the default Spam Filter: defpackagemng failed: Execute spammng.exe --check failed with error code 1: Unable generate the unique file name by template D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassinlocal.cf[*].bak: directory D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassin does not exist.
I have this error.
HTML:
<?xml version="1.0" encoding="UTF-8"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<configSections>
[Code] ....
I want to add a schedule task for run a script.
Path to executable file: C:Windowssystem32cscript.exe
Arguments Field: E:vhostsmysite.irhttpdocsschedule.vbs
But i get error:
Failed with error: 'C:Windowssystem32cscript.
exe ' is not recognized as an internal or external command, operable program or batch file.
setting up a server running ZFS as a backup server. My only problem is that it's very new to me, and naturally I'm skeptical of it's redundancy capabilities etc, I don't want to get burned. Anyone used ZFS, what's your experience with it?
View 2 Replies View RelatedHow stable is Apache for Windows XP Pro?
Can i get the mod_rewrite to work just fine?
Is this a good idea if im no linux buff, or should i just go ISS?
Most people probably run Linux on their media servers, but since I don't know much about Linux and the media server we have is unmanaged, I was wondering how you guys feel about running Windows Server 2003 Std on a media server instead of Linux. We'll only be using the server to host Flash video files (.flv) and we'll be serving those vids on websites hosted on other servers, resulting in approx. 50,000-100,000 media views per day (filesizes range from approx. 5MB to 10MB). We don't want to run Windows Media Services, just a Web server (IIS6) and have the Flash video players on the external websites take care of the streaming/downloading part.
View 0 Replies View Relatedif i can create 2 VPS with completely different OS such as CentOS5 and Windows 2003 Std.
The main server will be running CentOS with HyperVM.
I have faced the following ftp backup error in windows plesk 11.5.30
Transport error: unable to send directory to repository: Transport error: unable to put local file C:Program Files (x86)ParallelsPleskPrivateTemp/repo_transport_tmp_01cf171bcedd7710ackup_1401220130.zip to backup_1401220130.zip: Curl error: Failure when receiving data from the peer
I run a FreeBSD box as my file and webserver I use a DynDns domain name and run the little update program. But anyway when ever I use my lappy and when ever my lappy makes an outgoing connection a login prompt comes up asking to connect to my domain. It used to just say my public IP but I edited hosts.rc so now it says my domain on the prompt.
Is this somthing to do with samba or apache on BSD or is windows detecting that I host my own or what.
I upgraded Plesk 11.5 to the latest version 12.0.08 # 5 and now I can not configure the external FTP backup I get the error:Transport error: unable to list directory: Curl error: Timeout was reached. Also failing the backup shows this error: Unable to rotate dump: The dump rotation is failed with code '126 'at / opt / psa / admin / bin / plesk_agent_manager line 1041.
And this one:Can not upload file 'domains/domain.tld/backup_domain.tld_info_1406210716.xml' to ftp. Error code: 1..my SO Debian 6.0.8
i have make a full Plesk Backup on my Old Server with Plesk 12.0(Ubuntu) and will restore the Backup on my new Server with Plesk 12.0(CentOS).When i will restore the backup i get this error: "Error: The source file is not a valid XML file. If you supplied an archive file containing a backup from Plesk version 9 or later, then extract the contents of this archive, and process the extracted XML file with the converter. If you want to convert a backup file from a Plesk version earlier than 9, then you first need to process it with the pre9-backup-convert utility, and then process the resulting file with the pre10-backup-convert utility."
In the Logs i found this:
deployer.log - [URL] ...
import.log - [URL] ...
pmmcli.log - [URL] ...