on a fresh installation of Ubuntu (at first 14.04 but on 12.04 the same problem occurs) I installed Plesk via the autoinstaller. It seems to be all fine except I cannot open Plesk in the browser.
The web browser shows "502 Bad Gateway", a look into the error_log at "/var/log/plesk/sw-cp-server" shows the following error:
Code: 2014/08/11 09:37:22 [crit] 4988#0: *4 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxx.xxx.xxx.xxx:8443" So the problem seems to be the sw-engine service that cannot be started. If I try to start it manually with `/etc/init.d/sw-engine start` it just fails:
Code: * Starting Plesk engine pool manager sw-engine-fpm [fail]
Where to find any startup error log for sw-engine, where I could find any further information.
My Plesk version is 8.2 and i use debian 3.1, I check the instructions on
[url]
this faq, it seems added in both inetd configuration file and xinetd.d configuration file in my configuration, also xinetd is working through system but ftp cannot be connectable. It gives "Unable to login server" from remote client and i also check with command line ftp client and service says that "421 Service not available, remote server has closed connection"
I also check this
[url]
faq and port is open:
Quote:
Starting nmap 3.81 [url] at 2007-08-02 16:59 CEST Interesting ports on xx-server.xxxxxx.net (xxx.xxx.xxx.xxx): PORT STATE SERVICE 21/tcp open ftp
Nmap finished: 1 IP address (1 host up) scanned in 0.013 seconds
Is there anyone knows how could I solve this situation?
Is it possible to install and run Plesk on Google App Engine? If so, could you point me to some appropriate documentation? If not, what about Google Compute Engine?
Is it possible through Plesk Linux version on the root servers to update?If not and you will update the Debian itself, you have to note something? What should you back up before everything to make Plesk is working again? Is a complete reinstallation is required?
I am attempting to migrate from a debian os server with the latest plesk 12 to Centos (rather cloudlinux) and would like to know if there are any options that should not be checked during the process?
I recently tried to do the normal procedure, which is to transfer all objects, etc. And for some reason the percentage went from 1-50% to then back to zero.. but when clicking to check the current status, its still working
Status: in progress Current operation deploying domain.com current operation progress: empty bar
Different sites are transferring, but I am not sure if the migration will effect the system because the difference in OS folder structure and file location.
I've been with my Strato VServer and it installed Plesk on Linux a big problem.
I coming no longer in the Plesk Dashboard and the following code appears:
Syntax error or access violation: 1286 Unknown table engine 'InnoDB'
Here are the contents of my my.cnf
# # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports.
I am using Parallels Plesk Panel v. 11.0.9 on a V-Server provided by Strato (Germany), the OS is Ubuntu 10.04 LTS. Established and running under Plesk is a MySQL-Database, administered via Plesk by PHPMyAdmin 3.5.8.1. PHPMyAdmin offers the following information:
Datenbank-Server
Server: Localhost via UNIX socket Software: MySQL Software-Version: 5.1.41-3ubuntu12.10 - (Ubuntu) Protokoll-Version: 10 Benutzer: admin@localhost Server Zeichensatz: UTF-8 Unicode (utf8) Webserver
sw-cp-server Datenbank-Client Version: libmysql - mysqlnd 5.0.8-dev - 20102224 - $Id: 731e5b87ba42146a687c29995d2dfd8b4e40b325 $ PHP-Erweiterung: mysql Click to expand...
Recently Debian released point release .6 of Debian Wheezy (Debian 7). This change in version number is causing all Plesk updates and upgrades to fail, due to 404 errors:
Code: Getting new version of Parallels Installer... File downloading parallels_installer_Debian_7.6_x86_64.md5sum: ERROR: The required version '3.16.20' was not found on the server. This could happen because of configuration error at the download site. Failed to download the package [url] ....
The requested URL returned error: 404...This has been going on a couple of days. When will this be fixed?
I use Windows 7, running Apache VC10 in the XAMPP environment. It worked well, I am a newbie, it runned smoothly to programe a brief static page. Now I have everytime this logerror... I didn't change anything in the files and scripts of my apache folder...
[Wed Jan 22 21:12:15.178559 2014] [ssl:warn] [pid 3392:tid 264] AH01909: RSA certificate configured for www.example.com:443 does NOT include an ID which matches the server name [Wed Jan 22 21:12:15.272159 2014] [core:warn] [pid 3392:tid 264] AH00098: pid file C:/xampp/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
After upgrading components as suggested by "Tools&Settings->Plesk->Updates and Upgrades" item, components remained the previous version (PHP 5.3.3 and MySQL 5.1.73) as stated by phpinfo() result and by "Tools&Settings->Server Management->Server Components" list, though "Update Components" is no more permitted as if there is nothing more to update.
I need both PHP and MySQL servers updated in order to run Joomla 3.3.6.
Yesterday we upgraded V.11 to V.11.5.30. And now we are not able to restore our backups anymore from our main server on our failover server by CLI (we have automated this with cronjobs and need the CLI backup/restore). We have a failover sulotion with two servers and restore the backups of our main server on our failover server!
If we try to create the map file on our failover server, we get the error:
The dump specification '/home/backups/plesk_partnerserver/dumps/backup_info_1308030132.xml' should be inside of dump directory '/home/backups/plesk/dumps'. /home/backups/plesk_partnerserver/dumps is the path on our failoverserver where we store the backups of our main server and /home/backups/plesk/dumps ist the regular dump path of the failover server.
And if we try to restore the file without creating a map file on our failover server with /usr/local/psa/bin/pleskrestore --restore backup_info_1308030132.xml -level server: Unable to resolve all conflicts
What happend? Now after upgrading to 11.5 our backup- and failover-solutions are in big trouble!
I need to upgrade mysql from 5.1.73 to 5.7 but I have applications like lms, cms, and websites that runs with that version with no problems, my question is: Some of you had problems upgrading mysql, because i kwon plesk runs over mysql y i don't want to mess up with plesk.
For some reason I am having issues with latest Plesk with php and wordpress. HTML sites are fine, but all php and wordpress sites are giving a 502 error after fully migrating. I repaired with Webserver Configurations Troubleshooter and rebooted and its still giving me the same issue.Also, noticed my previous server had php 5.4.36, the new CentOS server has 5.4.37.
I think the samba add on for Plesk 12 is not correctly implemented for CentOS 7.To get smb users added I first had to manually install the samba-client, since smbpasswd was missing:
Code: yum install samba-client Next I had to manually run
Code: chcon -R -t samba_share_t /var/www/vhosts/my-server.tld/ for each share to be able to access it...
We have a plesk server running on a Ubuntu 14.04.2 LTS machine. We check the state of the mailqueue with nagios, executing the "mailq" command. After the AutoInstaller upgraded our installation from 12.0.18 update 38 to 39, we noticed, that the nagios check failed.
After investigating a little bit, it seems that we found the problem:
When I enter "mailq" in the shell, the command is executed and gives me an proper output. But when I try to execute the command with its full path "/usr/bin/mailq" nothing happens, and I have to cancel with [ctrl]+[c]. The which-command delivers exactly the same path as written above...
I am running phpbb 3.0.12 installed from Plesk. In Plesk it is showing me that there is an upgrade available to version 3.1.2-15 however when I Re-Check the version in phpbb it says that I already have the latest version 3.0.12. That's a little weird.
The problem is when I upgrade to 3.1.2-15 in Plesk, it will mess with the whole installation. The forum page will redirect in circles to /install/index.php which doesn't even exist and I can't do anything except revert to before the upgrade.
So my questions are: Why does Plesk show a version 3.1.2-15 but phpbb says the latest one is 3.0.12? How does the upgrade process from Plesk work? I expect it to automatically do everything, or why else would I want to let Plesk upgrade?
OS CentOS 6.5 (Final) Plesk version 12.0.18 Update #6, last updated at July 2, 2014 11:13 AM
The system is up-to-date; last checked at June 27, 2014 04:43 AM
All current websites on the server seem to work fine any new subscriptions we cannot get working at all.
We can connect via FTP to new sites SOMETIMES - just cant get directory listing. When we can connect and get into a directory it slows down.
In Active mode: Command:MLSD Response:425 Unable to build data connection: Connection refused Error:Failed to retrieve directory listing​ Install Wordpress via the Parallels panel it loads and says it is all there, just can't log or display any pages. The default Parallels page is displayed.
Upload a html page via the File Manager in Parallels and it displays the default Parallels page.
Unpack the Wordpress tar file via File Manager and it displays the default Parallels page.
The Wordpress feature in Parallels says it is working fine, can't display any page, can't log in as it returns a 404 page or the default Parallels page.
Create a site in Presence builder and Parallels says there is a site. The default Parallels page is displayed when opening the site.
Go to DOMAINS and there is 0mb in space used and there are files listed in the File Manager - none of which can be displayed.
After successful creation of a full backup, pmm-ras hangs forever (100% CPU) while trying to export the dump to FTP. I have two identical Plesk 12.0.18 installations and this happens only on one of them.
I see the following in /opt/psa/PMM/sessions/*/.stderr:
Use of uninitialized value in numeric eq (==) at /opt/psa/admin/bin/plesk_agent_manager line 827.
I have been seeing these in my log and received complaints from customers not able to get their mail out. These messages just stay in the queue and go no where.
what they are successfully using as a tlsserverciphers and tlsclientciphers? Maybe it the dh key being too small. How can this be fixed on Qmail?
Plesk Panel > Updates and Upgrades > Install "Plesk VPN extension" Green Message "All operations with products and components have been successfully completed." Going back from Upgrade window to Plesk Panel Home
[Code] .....
What I already have tried: Shell > apt-get install psa-vpn
Getting error mossage:
Setting up psa-vpn (12.0.18-debian7.0.build1200140606.15) ... ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
Shell > modprobe tun ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
I tried to install php55 on opensuse 13.1 with plesk 12 running from an opensuse untested package
goal: Install php55 for all domains/subscriptions, esspecially including zendoptimizer. Sicne its all WP, there is no need to configure php-version it for each domain. I actually dont even need several php-versions.
result: - php-version shown: 5.5 - mysql extension missing in package - wordpress in my subscriptions couldnt connect to mysql-db
assumption: - "bad" sw-package - bad configuration - my lack of knowledge esspecially about php/mysql
question(s): - Is there a standard/recommended install for php5.5 on opensuse 13.1 and plesk12? I failed to google a fitting one - I probably had the wrong package for php55 - compile myself or is there a recommended package? - Should I go for php 7 (6) or go for php 55? (Why?)
I am trying to install Plesk 12.0 on fresh CentOS 6 (64bit). It goes as far as initialising the databases and then moans about missing files:/usr/bin/sw-engine: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I then install libpng $ yum install libpng.x86_64
Re-run installer and hits next error - libfreetype: /usr/bin/sw-engine: error while loading shared libraries: libfreetype.so.6: cannot open shared object file: No such file or directoryI have CentOS-base repo and Epel repo enabled.
Why are those files not being installed as dependencies by Plesk? Is this a bug ?