I'm getting a traffic notification on a site I restored from a backup that originally came from a standard Plesk edition. Web Admin Edition doesn't appear to have access to Subscriptions, and all I can find with regard to limits under Webspaces is a hard disk quota, which isn't even editable. How do I amend of remove the limit?
View 6 Repliesthere is emails creation limit in this license?
i got this: The limit on the number of mailboxes has been reached
Early on, I use this Plesk under trial license mode and have set the subscription for each domains to 20GB (hard disk) and 100GB (bandwidth).
Later, I sign up for Web Admin Edition. I understand that this version does not have abilities to manage quotas. The issue that I have now, after I entered the activation key (Web Admin Edition), my existing domain's quota remain as it is instead of unlimited.
Please refer to the attachment to see the screenshot....
The license says that it provides 10 domains on the License Management page. However, when I try to add a new domain, I get:
Code:
Warning: Permission denied.
When trying to add a domain from the command line, I get a warning that I can't add a new subscription (which is probably the way Web Admin works, 1 Subscription, 10 domains):
Code:
# plesk bin domain --create test.be
An error occurred during domain creation: You cannot manage subscriptions due to license restrictions.
How can I use all 10 domains?
I just installed Plesk 12 Web Admin Edition, installed and activated all licence keys and everything works fine.The only thing, I can't find the "Service Provider View" in the Interface Settings, there is only a "Power-User" view provided, even I've selected the Service Provider View during Plesk Setup, I was moved to the Power User view and now I can't switch the interface.I am really missing the server health monitoring from this Service Provider View like got it on all other servers I have.
View 4 Replies View RelatedSuddenly my plesk 11.5.30 #47 stops sending notification mails to Administrator email. What can I check to solve the problem.
View 2 Replies View RelatedI migrated from one server running Plesk 10.4.4 Update #59 to a new server running Plesk 11 which I then updated to 12.0.18 Update #32. Since moving to Plesk 12 the "Notify when disk space/traffic usage reaches" emails have been being sent to our customers set up on the server whereas previously they were sent to the server admin email address.
Is this a change with this version?
how to adjust the mailbox sizes.
i imported ~15 email account during a cPanel migration/transfer done with the manager. mails are there but mailboxes, that had an unlimited quota, are now set to 350MB.
i tried a bunch of stuff, from searching the whole webinterface, changing db entries up to postfix main.cf.
i'm just restoring yesterdays backup. i already lost hours, and now am loosing nerves ..
where can I find this setting, or how can i set it in the DB (chancing max_box and mbox_size did not work, changes in the mail table were reflected on the UI, but not for postifx ..) ?
I dont find where or how can I change default mailbox size, traffic and disk space for each domain in Plesk 12 Web App Edition, I only have unlimited by default.
View 15 Replies View Relatedsince i started working with the version 12.0.18 from plesk, my webserver is crashing after some hours, i found no errors why it's crashing, but while it's crashed i see following issues:
- SSH instantly denies connection
- Plesk Shows "Site not available"
To fix that i had to reboot the server completely, then after one or two hours, that same error is coming up again.
I am reading the plesk documentation about "Tags Used in Notification Messages". URL....It says that one can use a <password> tag which will show the user's password ("user's password for authorization in Plesk").How can Plesk show a password? I would assume all passwords are saved as hashes and not as plain text?
View 10 Replies View RelatedWhen i go to tools & setings -> notifications, i have this message:
Error: Unable to create notification: Unable to create Note object: Note: unable to select: no such row in the table.
The premium antivirus when enabled it automatically sends notifications to both sender and server admin. I wish to disable the the notification to the sender and also only send a summary email weekly to the admin.
View 3 Replies View RelatedI was wondering how to change the notification destination email for alerts sent by Plesk Health Monitor?
I tried to modify the XML configuration file with this at the beginning:
<Misc alarmsInterval="5">
<notificationEmail address="mydestinationemail@domain.com"/>
</Misc>
But it doesn't work.
I want to send a notification (by an email to SMS gateway) when a specific email arrives. I see that Roundcube has a sieve filter option called "Send Notification" and it has three input boxes which have no tooltips and I am unable to find any documents telling me what to fill in those boxes.
The boxes are:
Method
Options
Message
The Message is obvious enough, but the other two?
For the method, I tried mailto:<me@myemailaddress.com>
I left the options blank, typed in a short message and tried to save the filter, but it gave me an error message "Unable to save filter - server error occurred". Annoyingly, it then wiped out what I had typed and started me with a blank rule again. I also tried without the < and > round the email address.
Any clues as to proper syntax and what the options are?
Also, is it necessary to have another action after the Send Notification action to file the email away somewhere, or will it just be left in the inbox anyway if the only action is the notification?
Simple... new Plesk 12 includes this fancy feature to tell me which Wordpress plugins and themes need updating (because I obviously can't do this myself). But maybe I don't want to update some plugins (because they've been customized and changed)... how do I....
STOP Plesk 12 from sending me Wordpress update notification emails EVERY DAY!???? The auto-update is off... and EVERY day is sends me (and all of those clients) an ugly email about their Wordpress installations. How do I turn this OFF?
Not sure if all notifications are working or not but I do know that when I create a new customer with a new subscription no notification is received. I have tested with several email addresses.
View 1 Replies View RelatedI need to sending health notification emails to another email.
I change admin : /usr/local/psa/bin/init_conf --update -email xxx@xxx.xx
Admin change, but health notification email not change.
Is there any possibility to change the Frequency of the Wordpress Update Notification Mails?
It's very annoying for our Customers to get those Mails every day ... Once a week would be more than enough ...
Every time I log on plesk 11.09 I get an email from admin saying that due to maximum number of failed login attempts for admin, the account was blocked for 30 minutes.
First, I do not get failed login attempts, I log in every time.
Two, the account is not blocked, I can log in, out and back in as many times as I want without problem except that I get this email everytime.
Where I can find option for enable multiple log in for admin account?
View 6 Replies View Relatedjust a quick question for those already tried it. I have Horde installed as the webmailer for my Plesk installation. After login in to Horde with an admin account I get update notifications for several of Hordes apps. Is it safe to update them or will it lead to problems with Pleskl?
View 2 Replies View RelatedI generate the ssl for my customer going into this direction:
Tools & Settings > SSL Certificates > add new
I put the key there its ok until here.
Then I follow this: After adding an SSL certificate to a domain, you need to enable SSL support and select that certificate in the website hosting settings: Websites & Domains > Hosting Settings of this domain > Security.
But the dropdownlist there are not SSL with the name that i create on panel.
I have just looked at the plesk panel log - /usr/local/psa/admin/logs/panel.log - and seen an alarming number of attempts to access plesk using the admin user. i.e.
[2015-02-02 14:53:46] ERR [panel] [Action Log] Failed login attempt with login 'admin' from IP 50.62.148.176
I have fail2ban installed and set up for other things...
To be clear i don't mean the wp-config.php admin password for mysql but the wordpress Plesk admin account that is associated with Log in button
For some reason my user has lost his password and is not able to use the Wordpress forgot password - wizard form at the page where you normally logged on.
I have tried to reset the password via Change Account on the WordPress Installation and it came back with the message
Error: Unable to find the specified administrator account in WordPress. Specify the username of your administrator's account in WordPress. This account will be associated with Plesk.
I have tried to add another admin via MySQL with this [URL] ... and that didn't work either.
Why can i login with two different passwords for the user admin in plesk control panel?
View 1 Replies View RelatedI'm running Plesk 12.0.18 Update #36 on CentOS 6.6 and when I log in, after just a minute of inactivity or so I get logged out.
The period of inactivity is set to 60 minutes, so that shouldn't be the problem.
After yesterday autoupdate (to Plesk 12.0.18 Update 48) admin area shows:
502 Bad Gateway
nginx
While navigating to Tools & Settings:
ERROR: Zend_Controller_Exception: SQLSTATE[HY000] [2002] Connection refused#0 /usr/local/psa/admin/externals/Zend/Db/Adapter/Pdo/Mysql.php(109): Zend_Db_Adapter_Pdo_Abstract->_connect()
#1 /usr/local/psa/admin/externals/Zend/Db/Adapter/Abstract.php(459):
[Code]....
I am using CentOS 6.4... I cannot login to the admin page. Showing this message:
Error: Unable to log you on. An internal error occurred in the Single Sign-on authorization engine. Please try to log in later, and contact your hosting service provider if the problem persists.
Error log:
Doing restart of Parallels Installer...
2014-05-17 01:08:38: (server.c.1543) server stopped by UID = 0 PID = 10122
2014/05/17 01:15:04 [crit] 16495#0: *1 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: 127.0.0.1, server: , request: "POST /plesk-billing/task-manager.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "localhost:8443"
[Code] ....
I have tried this post: [URL] ....
[root@ns4008757 ~]# /usr/share/plesk-billing/integration --command=repair-all
Customer & Business Manager is not installed yet.
[root@ns4008757 ~]# /usr/local/psa/bin/sso -g
SSO status: on
SSO server url: https://XXX.XXX.XXX.XXX:8443
SSO API version: sw:sso:idp:1_0
SSO Application ID: z9fabw14uesl6ccoz0wnpwk68eghgvs6ny7
After running this two lines, when i login to admin panel, it shows: Can not extract SAML message.
It's possible to change the main plesk user "admin" I would chenge the "name" only because chrome make me crazy with password stored
How can I change from panel or from everywhere the "admin" username without any problem of course in the plesk functionality
During the installation of Plesk, at first it used the root password, and then had me create an "admin" user.
When I log in using either I don't see any difference in the UI or options. Is there a difference or a reason to use one over the other?
Or is it just to give someone access to admin Plesk without giving them full root password of the server itself?