After yesterday autoupdate (to Plesk 12.0.18 Update 48) admin area shows:
502 Bad Gateway
nginx
While navigating to Tools & Settings:
ERROR: Zend_Controller_Exception: SQLSTATE[HY000] [2002] Connection refused#0 /usr/local/psa/admin/externals/Zend/Db/Adapter/Pdo/Mysql.php(109): Zend_Db_Adapter_Pdo_Abstract->_connect()
#1 /usr/local/psa/admin/externals/Zend/Db/Adapter/Abstract.php(459):
[Code]....
I generate the ssl for my customer going into this direction:
Tools & Settings > SSL Certificates > add new
I put the key there its ok until here.
Then I follow this: After adding an SSL certificate to a domain, you need to enable SSL support and select that certificate in the website hosting settings: Websites & Domains > Hosting Settings of this domain > Security.
But the dropdownlist there are not SSL with the name that i create on panel.
Today at 12.50 pm my (ubuntu 14.04.1 LTS) server running plesk 12.0.18 suddenly stopped serving websites. Any attempts to access a webpage on any vhost returned the 502 bad gateway using Nginx error messsage.When I looked at the nginx logs, I found messages like:
2014/10/30 14:48:00 [error] 3099#0: *101 connect() failed (111:
Connection refused) while connecting to upstream, client: m.m.m.m, server: , request: "GET /server-status HTTP/1.0", upstream: URL....
Restarting apache & nginx (/etc/init.d/apache2 restart & /etc/init.d/nginx restart) made no difference and I had to reboot to restore http access.
Strangely if I browsed with port 7080 specified (i.e. http://n.n.n.n:7080), this worked fine for all vhosts, so apache (which I believe is listening on this port while nginx listens on port 80) is working fine - nginx is just not able to pass stuff to it?
this is a fresh Plesk 12 installation on a Dedicated Server, on Debian 6. I haven't installed a License key yet.When i tried to run MIgration Manager, the loading was taking forever. Also, when i try to enter Webserver Configurations Troubleshooter, i get 502 Bad Gateway nginx error.In the /var/log/sw-cp-server/error_log i get this error:
Code:
2015/06/17 11:42:47 [error] 3918#0: *52 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D, server: , request: "GET /modules/configurations-troubleshooter/index.php/index/list HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/admin/module/list?context=modules"
When i try to insert a Plesk License, i also get this error:
Code:
2015/06/17 10:29:17 [error] 5643#0: *81 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D., server: , request: "POST /server/
key_upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/server/key_upload.php"
I followed this KB article 118757 but no luck. Also, the server resources are at the lowest usage and there is >2 TB disk space available.
We have a problem with a magento website. Often (perhaps when we use administration), we have the message "502 Bad Gateway nginx".
We have added server instructions in Plesk Nginx:
proxy_buffers 16 16k;
proxy_buffer_size 32k;
fastcgi_buffer_size 32k;
fastcgi_buffers 16 12k;
But we have still the problem.
We have tried :
[URL] ....
And
[URL] ....
Without results...
The log file say:
[client x.x.x.x] client denied by server configuration: /var/www/vhosts/domain.com/httpdocs/app/etc/local.xml
x.x.x.x is the website IP.
When i open the page i get the error: "502 Bad Gateway"with strace i get the following error:
Code:
connect(14, {sa_family=AF_FILE, path="/var/run/mysqld/mysqld.sock"}, 110) = 0
setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported)
setsockopt(14, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0
System: Debian 7.5
Mysql: 5.6.19
Plesk: 12.0.18
I have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View RelatedAfter upgrading (i know, i should not do this) from Squeeze to Wheezy i have got a problem with subscriptions.Plesk seems to work, but whein i want do manage a domain/hosting. i just see 502 Bad Gateway nginxClick to expand...
View 7 Replies View RelatedI have a server with the latest version of plesk and centos.
The main site is Articoli Promozionali
Until now kept on the server active both apache and nginx.
Tonight I tried to disable apache leaving only nginx.
That raises the error: 502 bad gateway NGINX at all sites on that server.
To use nginx i need to keep active apache?
What can cause that error?
I have upgraded from 11.5 to 12, and now if I try to open Plesk on the port 8443 I have this error:
502 Bad Gateway
nginx
This is the log:
2014/06/27 18:25:13 [crit] 1629#0: *2 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: 79.49.206.176, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "87.106.85.233:8443"
Yesterday I've upgraded the server to Plesk 12.0.18. After the upgrade, a WHMCS install has stopped working.
The only error logs where I found errors is the proxy_error_log. It contains this kind of lines (for the 502 error):
2014/08/13 08:13:45 [error] 2918#0: *400 upstream prematurely closed connection while reading response header from upstream, client: XX.XX.XX.XX, server: XXXXXXX.COM, request: "GET /knowledgebase.php HTTP/1.1", upstream: "http://XX.XX.XX.XX:7080/knowledgebase.php", host: "xxxxxxxxx.com"
i have plesk panel 12 ... in the last few days there was a automatically update from plesk for my strato v-server.
After this update i got the message: 502 Bad GateWay - nginx when I will connect to my plesk login ...
all websites etc works fine but i can't login ...
Plesk 11.5.30 all latest updated installed is used with Power-User view on an Ubuntu 12.04 LTS 64 Bit system.
The Plesk Interface is working well in general. But if the customer clicks on "Webspaces" -> Add Webspace they run in a:
[URL] ....
Browser:
502 Bad Gateway
nginx
To try to fix it with:
/usr/local/psa/admin/bin/nginxmng --disable
/usr/local/psa/admin/sbin/httpdmng --reconfigure-all
/etc/init.d/apache2 restart
/etc/init.d/ngnix restart ( does not work anyway since the customer is not using it ) -> ngnix_enable=no
Which did not work ( ngnix is and was not active )
In the log /var/log/sw-cp-server/error.log
we can see:
[error] 1936#0: *180 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 84.177.142.220, server: , request: "GET /smb/account/create-subscription HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "server:8443", referrer: "https://server:8443/smb/account"
I have a problem with "502 Bad Gateway" errore when I'm trying to create a new subscription.
Here my logfile:
/var/log/sw-cp-server/error_log:
2013/12/10 12:47:03 [error] 11827#0: *100 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: XX.XXX.XX.XXX, server: , request: "POST /admin/subscription/create HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxxxxxxxxxxxx.xx:8443", referrer: "https://xxxxxxxxxxxxx.xx:8443/admin/subscription/create"Click to expand...
Since we switched to Plesk 12 and activated nginx the problem reoccurs reliably on every domain change.
As soon as a customer creates a new domain or alias and Apache restarts nginx delivers 502 errors for maybe 10 seconds. After that everything is fine again.
The system is Debian 6.0.10 with Plesk 12.0.18 Update #38
That might not be a problem in small environments, but with >100 domains the timeout is annoying enough for customers to pick up the phone.
Adding this to /etc/sw-cp-server/config did not do the trick.
http {
fastcgi_buffers 32 32k;
fastcgi_buffer_size 64k;
fastcgi_read_timeout 600;
fastcgi_send_timeout 600;
}
The server is idle, according to TOP.
Health center shows
Total usage
6056039.4% used 2198044.96
nginx CPU usage
156.5 % 3250.89
Mail server CPU usage
203.6 % 4844.61
MySQL CPU usage
12.2 % 10.28
Plesk CPU usage
164.6 % 95111.06
Getting tired of all the notifications plesk sends to my phone....
EDIT:
Happens everytime i reboot the server.
After about 15 minutes the stats normalise.
this is my first thread because a big Problem after Plesk update from 10.2 to 12.0.8.
Always i got a bad gateway when i try to reach https://domain:8443
The only mistake i cam see is after /usr/local/psa/admin/sbin/httpdmng --reconfigure-all
is
root@xxxxxxx:~# /usr/local/psa/admin/sbin/httpdmng --reconfigure-all.
sw-engine: /usr/include/libboost-plesk-1.54.0/boost/interprocess/mapped_region.hpp:820: void boost::interprocess::mapped_region:riv_close(): Assertion `ret == 0' failed.
Aborted
We are running Plesk 12 (latest version) on openSuse 13.1. The web server is nginx as a proxy in front of Apache. We are running into a 502 Bad Gateway nginx error when trying to send data from a simple form to a php script.
The log shows: upstream prematurely closed connection while reading response header from upstream
It seems that Plesk does not configure nginx properly as some pages, especially pages that are accessed via https have broken headers. The headers of a page that is displaying
HTTP/1.1 400 Bad Request =>
Server => nginx
Date => Sat, 26 Jul 2014 09:53:13 GMT
Content-Type => text/html
Content-Length => 166
Connection => close
Today morning a logged in in plesk without problems and started Fail2Ban and closed it. Now I want logged in and get only 502 bad gateway. All Domains working fine and shell access working fine too.
What happen here? What can I do?
It seems last night Plesk ran any update and it failed. I received an mail with a link to the log, but I cant access Plesk Panel to see the log.
When trying to access Plesk, I get "502 Bad Gateway" Message.
Inside the Log there are many errors like:
Code:
2014/12/18 15:26:51 [crit] 14416#0: *3563 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: xxx.xxx.xxx.xxx, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxxxx:8443"
Is there any way to disable auto updates for plesk?
We have a VPS with Centos 5 and Plesk 12.0.18.
The CRON service is running and works correctly, the Scheduled tasks on the administration Plesk Panel (tools & Setting / Scheduled tasks / root user) works ok, but when a customer sets a new scheduled task from her domain panel, don't works.
The task is a simple WGET command.
I've upgraded from WS2008R2 & IIS to CentOS and Plesk 12.Now, I wanted to change the webmail link for all domains to mail.domain instead of webmail.domain. I've followd 2 guides to do that: URLs....Everything went smooth, but now Horde and Roundcube look like this (even when I restarted the whole server):
View 12 Replies View RelatedWhen I turn on nginx for the server I am able to browse non SSL protected sites correctly. I receive a 502 Bad Gateway error on any sites that have an SSL certificate. Is there a fix for this? I have been unable to find one.
I am running Plesk 12 on an Ubuntu server.
under Plesk 12.0.18 PHPMyAdmin is failing to import a 3 MB SQL dump of a simple Joomla website. "Error 505 Bad Gateway", it says.It happens with other dumps too, some as small as ~500 KB. The format (SQL or ZIP) of the file uploaded doesn't seem to matter, because the upload itself seems to work; it seems it's the post-processing what is raising the error.
The funny thing is that the import itself seems to work (the contents of the SQL dump are imported), but the error message appears and causes confusion and support requests from our clients./var/log/sw-cp-server/error_log says:
2015/05/15 03:19:31 [error] 10215#0: *5 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: XX.XX. XXX. XXX, server: , request: "POST /domains/databases/phpMyAdmin/import.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxxx. xxxxxxx.com:8443", referrer: URL.....To me it sounds like a timeout.
This seems to be a "popular" error among Plesk users, and I have tried this, this and this with no luck.
As I read, when Plesk and WHMCS are in the same server, you may have 502 bad gateway errors when creating an account through WHMCS..Page not Found/Timeout/502 Bad Gateway error creating accounts with Plesk 10+..By default Plesk 10 and above performs a forced restart of apache when an account is created or suspended which causes WHMCS to lose connection to the server, and if your WHMCS is on the same server, you will also lose connection to WHMCS at the same time.
In order to resolve this please refer to the following knowledgebase article for instructions on configuring Plesk to perform a graceful restart instead: URL..
But when I activate nginx in Plesk the 502 bad Gateway problem comes back.Is there an option to activate Nginx graceful restart in Plesk?
I changed the Plesk mailserver from Courier to Dovecot. All went good, but after the Install i can not see new E-Mails in my Inbox. Even the Search does not Work.
I can change the Mailserver again and use Courier. This works and i can see my emails. But only with Courier.
Some details:
Inbox has 100 E-mails. After scrolling down to the first emails, i can even see the newest email. But i have to scroll down and load all E-Mails.
Changing "Sort by" from "Date" to "Unread" all emails appear, even the latest. But changing to "Date" the newest email is missing again. Only a Number on my Inbox button shows me there has to be a new email in there.
The Open Xchange Team can not find any errors, the open xchange log looks good.
I have a strange issue on a Plesk 12 VPS. Sometimes the sites result in a "502 Bad Gateway (nginx)". This happens 1 or 2 times a day on different times.
In the httpd log I see a record "can't apply process slot" and in nginx log I see "connect() failed (111: Connection refused) while connecting to upstream" but restarting apache and/or nginx will not always result in a working site.
When I restart iptables everything is working fine again.
Our server : [URL] .....
plesk v11 (64BITS)
PROBLEM DESCRIPTION
We found 502 Bad Gateway error Nginx on multiple domain "currently troissoeursetunfrere.com is a wordpress site e-commerce" and also malittleboutique.com ecommerce wordpress, possibly to fix this problem we have followed this tutorial " [URL] ....
we perform the following operations:
sudo apt-get remove php5 php5-cgi php5-fpm
sudo apt-get install php5 php5-cgi php5-fpm
Following these operations we lost access to cpanel.
Where I can find option for enable multiple log in for admin account?
View 6 Replies View Relatedjust a quick question for those already tried it. I have Horde installed as the webmailer for my Plesk installation. After login in to Horde with an admin account I get update notifications for several of Hordes apps. Is it safe to update them or will it lead to problems with Pleskl?
View 2 Replies View Relatedthere is emails creation limit in this license?
i got this: The limit on the number of mailboxes has been reached
