since i started working with the version 12.0.18 from plesk, my webserver is crashing after some hours, i found no errors why it's crashing, but while it's crashed i see following issues:
- SSH instantly denies connection
- Plesk Shows "Site not available"
To fix that i had to reboot the server completely, then after one or two hours, that same error is coming up again.
how to adjust the mailbox sizes.
i imported ~15 email account during a cPanel migration/transfer done with the manager. mails are there but mailboxes, that had an unlimited quota, are now set to 350MB.
i tried a bunch of stuff, from searching the whole webinterface, changing db entries up to postfix main.cf.
i'm just restoring yesterdays backup. i already lost hours, and now am loosing nerves ..
where can I find this setting, or how can i set it in the DB (chancing max_box and mbox_size did not work, changes in the mail table were reflected on the UI, but not for postifx ..) ?
I dont find where or how can I change default mailbox size, traffic and disk space for each domain in Plesk 12 Web App Edition, I only have unlimited by default.
View 15 Replies View Relatedthere is emails creation limit in this license?
i got this: The limit on the number of mailboxes has been reached
Early on, I use this Plesk under trial license mode and have set the subscription for each domains to 20GB (hard disk) and 100GB (bandwidth).
Later, I sign up for Web Admin Edition. I understand that this version does not have abilities to manage quotas. The issue that I have now, after I entered the activation key (Web Admin Edition), my existing domain's quota remain as it is instead of unlimited.
Please refer to the attachment to see the screenshot....
The license says that it provides 10 domains on the License Management page. However, when I try to add a new domain, I get:
Code:
Warning: Permission denied.
When trying to add a domain from the command line, I get a warning that I can't add a new subscription (which is probably the way Web Admin works, 1 Subscription, 10 domains):
Code:
# plesk bin domain --create test.be
An error occurred during domain creation: You cannot manage subscriptions due to license restrictions.
How can I use all 10 domains?
I just installed Plesk 12 Web Admin Edition, installed and activated all licence keys and everything works fine.The only thing, I can't find the "Service Provider View" in the Interface Settings, there is only a "Power-User" view provided, even I've selected the Service Provider View during Plesk Setup, I was moved to the Power User view and now I can't switch the interface.I am really missing the server health monitoring from this Service Provider View like got it on all other servers I have.
View 4 Replies View RelatedI'm getting a traffic notification on a site I restored from a backup that originally came from a standard Plesk edition. Web Admin Edition doesn't appear to have access to Subscriptions, and all I can find with regard to limits under Webspaces is a hard disk quota, which isn't even editable. How do I amend of remove the limit?
View 6 Replies View RelatedI have some questions about Windows 2003. I have tested many different Windows VPS hosts and I have noticed that some of them offers Windows 2003 enterprise edition and some offers Datacenter edition. What is the difference between the two?
I remember that godaddy had datacenter ed and the vps I use now (eukhost) is using enterprise edition.
How can I limit outgoing mail hourly or daily (per mail account) on Plesk 11 Windows? I know I can do that with MailEnable Enterprise version, but I want to know if there any other way to do that.
View 4 Replies View RelatedI use Windows Plesk v 11.5.30 with Mailenable Standard Edition 7.0 version. In mailenable site i saw a new version of Mailenable standard version (7.5.1). URL...Can i download and update Mailenable version of my Windows PLesk? If i made this change and have problem can i do downgrande later?
View 2 Replies View RelatedI have one customer installed with plesk 11.5 + power pack integrated with mssql 2008 express on his server.But now client want to install Mssql 2008 web edition. Is this possible to replace the express edition with web in plesk panel?
View 1 Replies View RelatedWe have a Windows 2003 Enterprise server with 6GB of RAM and about 20 terminal services users logging in. These users then launch a program called Accuthin Thin Client giving them access to a piece of software called Southware that runs on a Centos 5 Linux server on the same network.
Problem seems to be that saving files to the network share causes windows to blue screen and crash. Has anyone ever heard of this before? I know it is a shot in the dark but we have been investigating this issue for 4 months, have replaced the Windows server 5 times, increased RAM to 8 GB and installed Enterprise edition clean but the issue follow no matter what we do.
I've a question, one of the dedicated servers with CentOS and Plesk 8.1.1 crashed. Critical system files were corrupted so it was impossible to start the server.
What we could do is backup;
/var/www/vhost/*.*
/var/lib/mysql/*.*
We installed a new server with same software (CentOS and Plesk 8.1.1), we placed the backupped directories back, restored the MySql database...
But how can we restore the settings? With putty / commandline we can open all restored databases. But we have a feeling that the PSA database is not connected with the Plesk admin (GUI)...
Our primary question, how do we get our settings back in Plesk (like accounts; clients, domains, dns-records and so on?)
edited /usr/local/psa/admin/conf/templates/custom/domain/nginxDomainVirtualHost.php and add this include hhvm.conf; and work but it's possible to edit this setting only for one vhosts? I must enable only for one vhost because i have some php script not work with hhvm
View 3 Replies View RelatedHow do I go about installing Web Host with CloudLinux? I can't find the tutorial. I have the Web Host + CloudLinux VPS license.
View 3 Replies View RelatedI'm getting this error ....
Code: Unable to generate the web server configuration file on the host <xxx> because of the following errors:
Template_Exception: apache2: bad user name <username>
file: /opt/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0
Please resolve the errors in web server configuration templates and generate the file again.
<username> once was a user existing on the server. But I removed the user some days ago.
Since this morning I cannot reconfigure my web server. This always stops with the error message from above.
Unfortunately there is no clue, where the error could be located. The Abstract.php is crypted, so I am not able to check the where the problem is...
I would like to change the alias host from webmail.domain.com webmail to domain.com/webmail.
View 1 Replies View RelatedMy problem is, when I attempt to access a seperate webspace's control panel login through webspace2.com:8443 it automatically redirects me to https://hostname.com:8443.
If however I go to https://webspace2.com:8443 this redirect does not happen and I can log straight in through this domain.
Ideally I need to keep these domains separate and need to remove this non-https redirect that is currently happening.
I migrate from plesk 9.5 to another server with plesk 12.0.18, and then outlook and mail default from iphone don't work, but tunderbird and webmail work well.
In outlook when i put the same configuration than tunderbird and i try to send mail out from my domain said this error:
Error del servidor: '554 5.7.1 <244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]>: Client host rejected: Access denied
I don't know if outlook is bad configuration but with plesk 9.5 worked well, and now nothing.
I can recive mail but not send.
I currently migrate from cpanel to plesk12. Everything is working fine, but the emails are no been received, I´m able to send, but not able to receive.
The error is this one:
Apr 29 16:40:14 server postfix/smtpd[26799]: connect from mail-oi0-f42.google.com[209.85.218.42]
Apr 29 16:40:24 server postfix/smtpd[26799]: warning: 42.218.85.209.combined.njabl.org: RBL lookup error: Host or domain name not found. Name service error for name=42.218.85.209.combined.njabl.org type=A: Host not found, try again
Apr 29 16:40:28 server courier-imapd: Connection, ip=[::ffff:52.11.197.15]
[Code] ....
I thinks it´s permission on the folder, but already run the code : /usr/local/psa/admin/sbin/mchk --with-spam
It did not solved, is there anything else I can do?
I run a virtual server (Ubuntu 12.04, Plesk 12, Postfix 2.9.6) using plesk to manage multiple domains. The server address is server.domain1.com. I use plesk to also manage domain1.com regarding all services, including DNS and mail.
What I just found is that postfix sometimes issues the following warning:
server postfix/trivial-rewrite[7397]: warning: do not list domain server.domain1.com in BOTH mydestination and virtual_alias_domains
The essential part of my main.cf is:
myhostname = server.domain1.com
mydestination = localhost.$mydomain, localhost.localdomain, localhost
virtual_mailbox_domains = $virtual_mailbox_maps, hash:/var/spool/postfix/plesk/virtual_domains
virtual_alias_maps = $virtual_maps, hash:/var/spool/postfix/plesk/virtual
virtual_mailbox_maps = , hash:/var/spool/postfix/plesk/vmailbox
virtual_transport = plesk_virtual
And /var/spool/postfix/plesk/virtual_domains contains amongst others:
domain1.com domain1.com/
I do not have any issues with receiving or sending e-mails right now, but would like to get rid of the error message however.
Could it be the problem that postfix automatically sets mydomain to $myhostname with skipping the first part (i.e., mydomain is implicitly set to domain1.com)? Should I manually set mydomain to server.domain1.com instead? Any other recommendations? Since mydomain seems to be used in multiple options [URL] ..., I wonder what I might destroy with changing this? As all mail services run without any further troubles at the moment, I don't want to break this...
As I assume that quite some people use a plesk-based server to manage the domain to which the server itself belongs to, I would assume that there should be a general fix/check to updated mydomain accordingly?
I have a fresh server running CentOS 6 (final). I am trying to install Plesk 11.5.30 but i am experiencing some problems. When i run the plesk-installer i get this message:
Your host name must resolve to the correct IP address of your server, unless you are using network address translation (NAT).
Please quit Parallels Installer, fix the host name resolution problem, and then try installing again.
You can skip the hostname check and continue the installation, however, in such a case, the installer cannot guarantee successful installation.
Now, in my /etc/hosts file i have this:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
Is this correct? Or do i need to add/change something else?
My server is in the clound.
When I create a webspace for the main account holder (web host) , I get the following error when I click on "Manage Hosting" ?
ERROR: Call to a member function getDomainId() on a non-object (AccountController.php:77)
version: Parallels Plesk Panel v11.5.30_build115130819.13
os: centos 6.5 (final)
I recently received this messsage from in my mailbox "Unable to generate the web server configuration file on the host <nsxxxxxxx.ovh.net>" which is coming now every hour for 4 days now.
I first tried to regenerate an apache conf file with the magic on my Centos 6:
# /usr/local/psa/admin/sbin/httpdmng --reconfigure-all
but it gives me this output:
Execution failed.
Command: httpdmng
Arguments: Array
(
[0] => --reconfigure-server
[1] => -no-restart
[Code] .....
At line 10 in my server.conf file I have a bunch of ipv6 address that looks like this:
NameVirtualHost xx.xx.x.xx:80
NameVirtualHost [xxxx:xxxx:8:5b11::1000]:80
NameVirtualHost [xxxx:xxxx:8:5b11::1001]:80
NameVirtualHost [xxxx:xxxx:8:5b11::1002]:80
[Code] ....
After the last update, I get this error:
Unable to generate the web server configuration file on the host <xxx.de> because of the following errors:
Template_Exception: nginx: [emerg] PEM_read_bio_X509_AUX("/usr/local/psa/var/certificates/certRHXRsQy") failed (SSL: error:0906D064EM routinesEM_read_bio:bad base64 decode)
nginx: configuration file /etc/nginx/nginx.conf test failed
file: /usr/local/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0
Please resolve the errors in web server configuration templates and generate the file again.
the websites of my customer are not reachable now....
I tried adding an apache service node to PPA Admin Node.
I referred to the specs at [URL] ....
Specifications of the Apache server node are:
RHEL 6.4 64bit
RAM 3GB
CPU 2.5GHz
Free Space 18GB
Ports Opened:
80, 443: HTTP, HTTPS
8352-8999: Communication between a service node and PPA panels
22: Communication through SSH
20, 21: FTP connections
But when I tried adding it as a service node, PPA says The Linux platform installed on the remote host 'xx.xx.xx.xx' is not supported. Please, check the list of supported platforms.