Apply an IP fix to a specific domain but this domain dont resolve on browser [URL] .....
On chrome i got this : ERR_NETWORK_ACCESS_DENIED
I already disable iptabes and denyhosts
I check on dnsstuff and everything seems good.
I check ifcfg-eth0 file - ok
IP its add into Plesk panel by ToolSetings -ok
Its set on domain by Hosting parameters -ok
Reverse on IP is ok ....
I added a AAAA ipv6 zone to my dns the idea was to run the SPF validation by google (who checked the ipv6 and not ipv4 (??) )Out today I have a client who called me and because it can no longer connect to my site...I take his computer in hand by teamviewer and actually the ping of my domain solves the ipv6 not ipv4 in the management of IP in plesk I
Mask IP address subnet Retailer Sites Interface
178.xx.xxx.xxx (shared) 255.255.255.0 eth0 0187
2001: xxxx: x: xxxx :: 1 (dedicated) 64 0 0 eth0
therefore 187 sites under the ipv4 and ipv6 0 on..I actually do not care about ipv6, it's just for spf..I lack some knowledge with dns I think...must I do something on dns to indicate that ipv4 is that actually hosts the site? or at plesk for all requests to be redirected to the ipv6 on ipv4?
I want to know what settings to make in the Dns of my Server so always to show the www. in the browser, before the domain name.
For example, in the url to be www.mydomain.com and not mydomain.com
When i try to go to horde after my upgrade from plesk 11.5.30 to plesk 12.0.18, my horde is loading as minimal cause this:
JavaScript is either disabled or not available on your browser. You are restricted to the minimal view.
But my javascript is enabled for this site.
I have a fresh server running CentOS 6 (final). I am trying to install Plesk 11.5.30 but i am experiencing some problems. When i run the plesk-installer i get this message:
Your host name must resolve to the correct IP address of your server, unless you are using network address translation (NAT).
Please quit Parallels Installer, fix the host name resolution problem, and then try installing again.
You can skip the hostname check and continue the installation, however, in such a case, the installer cannot guarantee successful installation.
Now, in my /etc/hosts file i have this:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
Is this correct? Or do i need to add/change something else?
My server is in the clound.
I've been having some DNS problems with one of my domains for quite some time now. The domain does not always resolve - some go days without being able to access the site.
I ran a simple BASH script to show what I mean. I replaced my domain with "mysite.net" and the IP with "xx.xx.xxx.xxx".
# for i in `seq 1 15`; do host mysite.net; done
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
Host mysite.net not found: 2(SERVFAIL)
mysite.net has address xx.xx.xxx.xxx
Host mysite.net not found: 2(SERVFAIL)
mysite.net has address xx.xx.xxx.xxx
Host mysite.net not found: 2(SERVFAIL)
mysite.net has address xx.xx.xxx.xxx
Host mysite.net not found: 2(SERVFAIL)
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
Host mysite.net not found: 2(SERVFAIL)
Host mysite.net not found: 2(SERVFAIL)
mysite.net has address xx.xx.xxx.xxx
Host mysite.net not found: 2(SERVFAIL)
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
Host mysite.net not found: 2(SERVFAIL)
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
mysite.net has address xx.xx.xxx.xxx
mysite.net mail is handled by 0 mysite.net.
Has anyone experienced a similar problem? I have gone over the DNS records countless times and see no problems. The site is hosted on my own dedicated server.
I am new to the dedicated servers. I have just upgraded myself to a dedicated machine.
I am getting error "couldnt resolve host" at every domain name when I type like
wget http://google.com
wget http://yahoo.com
I searched over internet and found some people telling that I should put nameserver to /etc/resolv.conf?
nameserver <ip here>
nameserver <ip here>
I dont know what IP to put here or if it is a solution to my problem.
I have setup an Addon Domain in cPanel.
[url]is pointing to:
[url]
That is working fine, test it for yourself.
However, I want the URL in the browser to read: [url]but currently as you can see the long URL appears.
How can I make the short clean URL appear in the browser?
I have installed WHM 11 on centos 5.3.
Currently I get problems that domains at certain places not open.
Like e.g I write my server IP XXX.XXX.XXX.XXX it works fine and I get ping reply also, but at the same time I write [url]it would not resolve.
Similarly in web browser I write server IP it gives cpanel page but on same computer I write [url]I get page cannot be opened, when I refresh the page at certain times then it would open. Now once it is opened in the same computer it would work fine here.
In some internet connections it works fine i.e no problems, in some connections get similar problems that domains does not resolve properly.
I checked my named service works fine.
I ve been having a problem with the "www" prefix for the domains
For example:
[url]
works ok
But
[url]
Does not resolve
here is the named conf
; Modified by Web Host Manager
; Zone File for hayalikelimeler.net
$TTL 14400
@ 86400 IN SOA ns1.theplanet.com. fikret.eforelektrik.com. (
2007032306
14400
7200
3600000
14400
)
hayalikelimeler.net. 14400 IN NS ns1.theplanet.com.
hayalikelimeler.net. 14400 IN NS ns2.theplanet.com.
hayalikelimeler.net. 14400 IN A 74.52.228.130
localhost.hayalikelimeler.net. 14400 IN A 127.0.0.1
hayalikelimeler.net. 14400 IN MX 0 hayalikelimeler.net.
mail 14400 IN CNAME hayalikelimeler.net.
www 14400 IN CNAME hayalikelimeler.net.
ftp 14400 IN A 74.52.228.130
I'm trying to download this 1 GB file on my Linux server CentOS. But its requiring me to enter a Captcha image which doesn't show up using Elinks or Lynx the two browser I tried.
Wget was my first thing that I tried but that wouldnt work since its impossible to enter the captcha using wget command.
So I need some help how should I download this to my server I'm on Slow DSL connection and it would take weeks to download 1 GB using my desktop and then reuploading it again to server using FTP.
When I hit my server's domain it redirects me to one of the hosted sites' domain with a 302 redirect. It used to return the default plesk server page. How can I cancel the redirect?
View 2 Replies View RelatedI've have a problem with a server : we have create as usual certificate with Tools > SSL certificates.
When we want to put certificate with the domain, we don"t have the "Secure your sites" menu in the "websites and domains" sub category.
Why ? How can i activate the certificate with the domain ?
For a Magento shop I want assign a dedicated IP to a domain. When I choose this second IP in “Subscriptions” --> Change Hosting Settings” and then select this IP under “Tools and Settings --> IP Addresses” as dedicated (or shared too) for this domain, calling the domain results in the Webserver´s default Plesk Page.
The Shopsite is not shown, but was working well with the shared standard IP.
Calling the IP directly with the browser shows the start page of the shop in raw HTML ( no CSS ).
Choosing a link results in a “Not found” page.
I am trying to change the default php settings under domain (upload_max_filesize & post_max_size) but nothing happens. I am running PHP 5.5 in FastCGI. I also changed it to Centos default PHP (5.4.16) but nothing happens again. It only works when PHP runs as Apache module. The problem is on FastCGI Application.
My server: Centos 7, Plesk 12 Check the screenshot for installed components.
Plesk 12. Using the "Corporate/Business" -> "Power User view".
Where do you add a Domain Alias? The webspace has no option to add this and all documentation I've found so far seems to indicate there should be a button that says add domain or add domain alias.
How I create DNS in Plesk for a domain?
Dedicate server from server4you with centos.
There is some problem with my email and developer tell me this yesterday:
To view DNS records for a domain you need to (after loging in as admin) click on the domain name, then choose DNS Settings. Mx record is configured correctly there, but they are not taken into consideration.
You should change the nameservers from the registrar to the nameservers of your hosting. Right now the following are used: ns-canada.topdns.com. hostmaster.topdns.com .
They should be either the nameservers received from the hostings, or if you did not received any then you will have to create them, on the registrar side and on your hosting side.
So you should go to your registrar and change the nameservers for your domain. Do not just change the ip for the main A record. After you do this you will need to wait a while for the changes to propagate.
On my registrar have i set in my server ip but when him do a test here: [URL] ....
I want to setup a domain alias without www in front of it. A quite simple task in the past...but not with Plesk 12. So I have a service domain (for example: service.com) that I use for ALL clients. But each client has only a subdomain of it as alias in his account. so client1.service.com, client2.service.com....and so on. And only that subdomain...nothing more...for each account. How to achieve that in Plesk 12?
View 1 Replies View RelatedError: IP addresses for mail service of domain <domain> are not set..This is error I'm getting. It was working some time ago, but now I cannot create new domain.
View 19 Replies View RelatedIs there a way to see what domain is getting hit when I have a huge traffic spike? Not the daily report, but in real time? Like when it is happening?
View 1 Replies View RelatedIt seems to me that the panel is not DNS Template for any domain.
Plesk v. 12.0.18
How can I configure a domain in plesk panel in order to show the domain with www (www.domain.tld)
Is the propertie "Preferred domain" in plesk 11.5 but in plesk 11.0.9 does not exist. How can I configure this?
Is it possible to add a ssl to a IP number despite of domain name?
I would like to know if i can buy a ssl and set a IP on website address...
I can't find email option in my plesk panel
I have installed mail servers in components, and i see mail settings under server tab but i just cant figure out how to enable mail for specific domain
If i go to webmail.pedjaapps.net i opens default home page, webmail subdomain points to my servers ip address in DNS, roundcube is also enabled in webmails....
I'm running plesk 12.0.18 on centOS 6.6 and I have some problems with ipv6 support for a domain. This is what I see in my apache logs for that domain:
2001:8d8:90b:c900::2a:19d1 - - [29/Jun/2015:17:44:55 +0200] "GET /hello.html HTTP/1.0" 404 1208 "-" "facebookexternalhit/1.1 (+http://www.facebook.com/externalhit_uatext.php)"
2001:8d8:90b:c900::2a:19d1 - - [29/Jun/2015:17:49:39 +0200] "GET /hello.html HTTP/1.0" 200 384 "-" "curl/7.19.7 (x86_64-redhat-linux-gnu) libcurl/7.19.7 NSS/3.16.1 Basic ECC zlib/1.2.3 libidn/1.18 libssh2/1.4.2"
2001:8d8:90b:c900::2a:19d1 is the ipv6 from my server, and it appears there because of nginx working as reverse proxy.
As you can see, facebook can't get /hello.html (404 response), but I can get it from another server using curl (200 response). I tried disabling nginx and this is what I see now:
2a03:2880:2110:dff3:face:b00c:0:1 - - [29/Jun/2015:17:55:11 +0200] "GET /hello.html HTTP/1.1" 404 1208 "-" "facebookexternalhit/1.1 (+http://www.facebook.com/externalhit_uatext.php)"
2001:8d8:8b3:6000::4e:c5a0 - - [29/Jun/2015:17:54:52 +0200] "GET /hello.html HTTP/1.1" 200 361 "-" "curl/7.19.7 (x86_64-redhat-linux-gnu) libcurl/7.19.7 NSS/3.16.1 Basic ECC zlib/1.2.3 libidn/1.18 libssh2/1.4.2"
Still not able to get /hello.html. This is a problem for me because I can't share anything on facebook, since their bot can't find anything on my site.
I've already configured ipv6 for my domain.
I am migrating some clients between Plesk panels ...
After migrate 10 domains the Health monitoring growup from MSQL from 1gb to 4.5gb
All 10 websites are small, how can i see to identify which domain/subscription is consuming a lot of resources?
I just created a new Domain "bernhardlinz.de" at the
Plesk Panel -> Websites & Domains -> Add new Domain
After the Creation the new Domain does not appear under "Websites & Domains".
I check the domain with
Code:
/usr/local/psa/bin/domain -i bernhardlinz.de
And all looks fine like my other, older domains:
Code:
General
=============================
Domain name: bernhardlinz.de
Owner's contact name: Bernhard Linz (admin)
Domain status: OK
[Code] ....
I can see the domain under "Mails" and also create new mail accounts. There are no Errors for this under
Code:
/usr/local/psa/admin/logs/panel.log
As i try to add the domain first i got a
Code:
[11-Jul-2014 21:41:35 Europe/Berlin] PleskUtilException: mailmng-outgoing failed: ERROR:outgoing:database disk image is malformed
Which I removed with the
Code:
/usr/local/psa/admin/sbin/mchk
Command I found in the Plesk forum. After that i could add the domain.
I try a add another fantasy domain - also works but alos not displaying in Panel "Websites & Domains"
I take a look at the Plesk-Database "psa" with the Build-In "phpMyAdmin"
I take a look at the table "domains" and it looks like the other entries.
The Server was restored a few days before from a Backup. After the restore i had have the problem the "mysql" service did not start. I fixed the problem with the description from [URL] ... (Start mysql in recoverymode, export all data, delete the content of the whole mysql folder /var/lib/mysql folder, init new database and import the exported data). After that all looks fine.
A domain has become suspended for some unknown reason so the client's site is down (we're getting the Web Server's Default Page). The account limits have not been exceeded and it appears there's no logical reason why this should have happened. In any case I've tried changing the status within Plesk 11 but without success. I've also tried to access via SSH but I'm getting an access denied message even through the password being entered is correct.
View 1 Replies View RelatedI have a domain that has a ton of alias domains in my panel.
If I get it to show "All" entries per page, change it to "Active List", and get back to "Classic List", they show up correctly.
Nevertheless, I have to do it every single time I log in to the panel.
Pagination also doesn't seem to work in 10, 25 and 100 entries if I don't do that.
That started happening after some update on version 12.
Just updated to V12 and noticed you can't copy a database from one domain to another as easy as before. So doing any testing is much harder. Is this correct or am I missing something...
View 5 Replies View Related